共查询到20条相似文献,搜索用时 15 毫秒
1.
The simultaneous voltammetric determination of melatonin (MT) and pyridoxine (PY) has been carried out at a cathodically pretreated boron‐doped diamond electrode. By using cyclic voltammetry, a separation of the oxidation peak potentials of both compounds present in mixture was about 0.47 V in Britton‐Robinson buffer, pH 2. The results obtained by square‐wave voltammetry allowed a method to be developed for determination of MT and PY simultaneously in the ranges 1–100 μg mL −1 (4.3×10 −6–4.3×10 −4 mol L −1) and 10–175 μg mL −1 (4.9×10 −5–8.5×10 −4 mol L −1), with detection limits of 0.14 μg mL −1 (6.0×10 −7 mol L −1) and 1.35 μg mL −1 (6.6×10 −6 mol L −1), respectively. The proposed method was successfully to the dietary supplements samples containing these compounds for health‐caring purposes. 相似文献
2.
In this study, a novel and highly sensitive electrochemical method for simultaneous determination of catechol (CC) and hydroquinone (HQ) was developed, which worked at GCE modified with Nano cobalt (Nano-Co) by electrodeposition and L-Cysteine by electrochemical polymerization. The Nano-Co/L-Cysteine GCE was investigated by cyclic voltammetry (CV), SEM and EIS. The excellent conditions have been selected including supporting electrolyte, pH, accumulation time and scan rate. The calibration curves of were obtained that the linear regression equation was I=0.0734c+6×10 −6 in the range of 5.8 μM to 103 μM (R 2=0.9942) for CC and the linear regression equation was I=0.0566c+5×10 −6 in the range of 5.8 μM to 100 μM (R 2=0.9967) for HQ. The obtained detection limits of CC and HQ both were 6×10 −7 M. The modified electrode was successfully applied to the simultaneous determination of CC and HQ in water samples. 相似文献
3.
A comparison of the analytical performances of four different (bio)sensor designs in H 2O 2 determination is discussed. The (bio)sensor designs developed were based on the use of (i) multiwalled carbon nanotubes (MWCNT), zinc oxide nanoparticles (ZnONP), prussian blue (PB); (ii) MWCNT, ZnONP, PB and ionic liquid (IL); (iii) MWCNT, ZnONP and horseradish peroxidase (HRP) and (iv) MWCNT, ZnONP, HRP and IL modified glassy carbon electrode (GCE). A performance comparison of (bio)sensors showed that the one based on HRP/IL-MWCNT-ZnONP/GCE showed the best analytical characteristics with a linear dynamic range of 9.99×10 −8–7.55×10 −4 M, detection limit of 1.37×10 −8 M and sensitivity of 17.00 μA mM −1. 相似文献
4.
One‐pot electrodeposited copper‐graphene (Cu‐GE ) nanocomposite acting as sacrificial template for the division electrosynthesis of palladium nanoparticles (PdNPs ) on pyrolytic graphite electrode (PGE ) was synthesized. The designed PdNPs‐GE nanocomposite was evaluated as a new material for highly sensitive determination of hydrazine (N 2H 4 ). Scanning electron microscopy revealed that the PdNP‐GE ‐modified PGE had uniform morphology. The results of energy‐dispersive X‐ray spectrograms confirmed the ingredients of the division electrosynthesis process. Electrochemical experiments were performed to characterize the sensing properties of PdNPs‐GE toward the electrocatalytic oxidation of N 2H 4 at 0.20 V in sodium phosphate buffered saline (0.1 M pH 7.0). The sensor showed fast response (<3 s), high sensitivity [398 (1 × 10 −6 A) (1 × 10 −3 M) −1], and broad linearity in the range 2.5 × 10 −8–2.7 × 10 −4 M with a relatively low detection limit of 1.0 × 10 −8 M (S/N = 3). 相似文献
5.
Simple, sensitive, accurate and inexpensive differential pulse (DPV) and square wave (SWV) voltammetric methods utilizing zeolite modified carbon paste electrode (ZMCPE) were developed for the determination of Oxymetazoline hydrochloride (OXM) in nasal drops. Various experimental parameters were optimized using cyclic voltammetry (CV). Calibration curves were linear over the concentration ranges 9.8×10 −8–3.6×10 −6 M and 9.8×10 −6–9×10 −5 M for DPV and SWV, respectively. The DPV method showed a limit of detection (LOD) of 1.04×10 −7 M. The method was applied for the determination of OXM in pharmaceutical formulation with an average recovery of 101.18 % (%RSD=0.41, n=9). 相似文献
6.
Citalopram, a selective serotonin reuptake inhibitor, is used as an antidepressant agent. In this study an on-line solid phase extraction method with spectrofluorometric detection was developed. Solid phase extraction cartridges contain 200 mg C18 with a particle size of 45 μm. The best solvent system found was consistend of ethanol and 0.1 M acetic acid (40:60, v/v) for elution. The optimized values of injection volume and flow rate were 1 mL and 2.5 mL min−1. The excitation and emission wavelengths were 240 and 300 nm. The calibrations were linear in the concentration range of 1.0 × 10−7–1.5 × 10−6 M in aqueous solution and 2.5 × 10−7–1.2 × 10−6 M in serum. The limit of detection values were 1.6 × 10−8 M for citalopram in tablets and 1.7 × 10−8 M in serum samples. The limit of quantification values were 5.2 × 10−8 M for citalopram in tablets and 5.5 × 10−8 M in serum. The proposed method has been applied successfully for the determination of citalopram HBr in pharmaceutical tablets and also in spiked human serum. The recovery values of the method were 99.5–100.6% for tablets and 98.8–100.9% for serum. 相似文献
7.
A simple and sensitive adsorptive- differential pulse- voltammetric method for the determination of flufenamic acid (FFA) is presented. The method is based on the preconcentration of FFA on carbon paste electrodes modified in situ with cationic surfactants, dodecyltrimethylammonium chloride (DTAC) or cetyltrimethylammonium chloride (CTAC), at submicellar concentrations. The best results were obtained with DTAC-modified electrodes. After optimization, with these electrodes and using an accumulation step at 0 V for 3 minutes in 0.1 M phosphate solutions pH 7, the peak current of the main oxidation process of FFA varies linearly with its concentration from 1×10 −9 M to 5×10 −5 M, with a limit of detection of 0.64 nM (0.2 ng/mL). The proposed method has been applied to the determination of FFA in spiked serum samples, treated with acetonitrile to separate the proteins. In the concentration range studied (3 μM to 65 μM) the recovery was near 100 % and the lowest concentration attainable in these samples is below 3 μM (0.8 ppm). 相似文献
8.
A simple and highly selective electrochemical sensor based on carbonized lotus stem (CLS) was developed for the simultaneous determination of hydroquinone (HQ), catechol (CC), and nitrite (NT) by using cyclic voltammetry (CV) and amperometry (AMP) methods. The CLS was characterized by the methods including field emission scanning electron microscopy (FE-SEM), Raman spectrum, FT-IR spectrum and X-ray diffraction (XRD). Brunauer-Emmett-Teller (BET) method was used to evaluate the pore structure and surface area of CLS. The oxidation peaks for HQ (116.2 mV), CC (220.1 mV), and NT (818.9 mV) were well separated under optimized conditions, which improved their simultaneous determination. The CLS modified electrode showed a good linear range between 1.0×10 −6 to 7.0×10 −4 M for HQ, and the detection limit was calculated as 0.15 μM. For CC the linear relationship was 1.0×10 −6 to 3.0×10 −3 M with the detection limit of 0.11 μM. For NT the linear relationship was 5.0×10 −7 to 4.0×10 −3 M with the detection limit of 0.09 μM. The results indicated that the intrinsic structure of natural biomass can be expected to design porous carbon for electrochemical sensors. 相似文献
9.
Herein, two electrochemical methods based on potentiometric and impedimetric transductions were presented for albumin targeting, employing screen-printed platforms (SPEs) to make easy and cost-effective sensors with good detection merits. The SPEs incorporated ion-to-electron multi-walled carbon nanotubes (MWCNTs) transducer. Sensors were constructed using either tridodecyl methyl-ammonium chloride (TDMACl) (sensor I) or aliquate 336S (sensor II) in plasticized polymeric matrices of carboxylated poly (vinyl chloride) (PVC-COOH). Analytical performances of the sensors were evaluated using the above-mentioned electrochemical techniques. For potentiometric assay, constructed sensors responded to albumin with −81.7 ± 1.7 ( r2 = 0.9986) and −146.2 ± 2.3 mV/decade ( r2 = 0.9991) slopes over the linearity range 1.5 μM–1.5 mM with 0.8 and 1.0 μM detection limits for respective TDMAC- and aliquate-based sensors. Interference study showed apparent selectivity for both sensors. Impedimetric assays were performed at pH = 7.5 in 10 mM PBS buffer solution with a 0.02 M [Fe(CN) 6] −3/−4 redox-active electrolyte. Sensors achieved detection limits of 4.3 × 10 −8 and 1.8 × 10 −7 M over the linear ranges of 5.2×10 −8–1.0×10 −4 M and 1.4×10 −6–1.4×10 −3 M, with 0.09 ± 0.004 and 0.168 ± 0.009 log Ω/decade slopes for sensors based on TDMAC and aliquate, respectively. These sensors are characterized with simple construction, high sensitivity and selectivity, fast response time, single-use, and cost-effectiveness. The methods were successfully applied to albumin assessment in different biological fluids. 相似文献
10.
A platform based on praseodymium doped dysprosium oxide-carbon nanofibers modified electrode was constructed for the simultaneous determination of SY and TAR. SEM, EDX and XRD techniques were utilized for characterizing the proposed material. The voltammetric behaviour and properties of SY and TAR were gradually improved at materials in order from CNFs to Dy 2O 3−CNFs and Pr 6O 11@Dy 2O 3−CNFs. The working range was found to be 1.0×10 −9–3.5×10 −8 M and 1.5×10 −9–4.0×10 −8 M for SY and TAR, respectively. The value of LOD was 3.12×10 −10 M and 5.35×10 −10 M for SY and TAR, respectively. The platform (Pr 6O 11@Dy 2O 3−CNFs/GCE) was successfully applied to the electroanalysis of samples. 相似文献
11.
We report a method for the fabrication of glassy carbon electrode modified porous graphene-polypyrrole-polyphenol oxidase (GCE−PG−PPy−PPO) modified electrode for the determination dopamine. The optimization of pH, concentration and detection limit of dopamine was employed by amperomatric technique. The detection limit of dopamine was found to be in a linear range of 2×10 −8 to 4.6×10 −5 M and lower limit detection is 4×10 −9 M. Michealis – Menten constant (K m) and the activation energy were calculated as 31.32 μM and 37.4−Kj mol −1, respectively. The developed biosensor was used to quantify the dopamine in human urine sample. 相似文献
12.
The electrochemical behaviors of melamine (MEL) were studied at paraffin-impregnated graphite electrode in PBS (pH 7.0) and 0.5 M H2SO4. Various methods including UV–vis thin-layer spectroelectrochemistry, infrared spectra (IR) and electrochemicatry have been performed to investigate the characteristics. In 0.1 M PBS (pH 7.0), MEL loses two electrons to form a dication, which couples head-to-head with a neutral molecule of MEL to form a dimer accompanying the production of azocompound, the dimer plays a role of a monomer in the following polymerization. In 0.5 M H2SO4, unstable MEL mostly hydrolyzes to form ammeline, ammelide, s-triazine-2,4,6-trion, and tricyanic acid, respectively; The hydrolysis could be accelerated by electrochemical method; Meanwhile, MEL associates tricyanic acid to give a plane molecule cake by hydrogen bonding. The spectra responses of MEL at 205 and 234 nm are linearly increasing in a same concentration range of 1.0 × 10−7–1.0 × 10−5 M in 0.5 M H2SO4 (determination limit, 1 × 10−8 and 3 × 10−8 (3σ)). The proposed method was successfully applied to the determination of MEL in real sample. 相似文献
13.
A reliable procedure for the determination of total phthalate esters as phthalic acid in environmental samples is based on differential pulse polarography (d.p.p.). The phthalate esters are extracted from the sample water with hexane; concentrated sulphuric acid/hexane partitioning provides effective removal of organic interferences. The individual phthalate esters are hydrolyzed by refluxing with 10 M potassium hydroxide to phthalic acid, which is extracted with ethyl acetate followed by evaporation of the extract. This procedure gives recoveries of 83–90%. The residue is dissolved in 0.1 M acetic acid/0.1 M potassium chloride for d.p.p. The otpimal conditions for polarography are discussed. The calibration graphs are linear over the range 2 × 10 ?6–1 × 10 ?4 M and the detection limit for phthalic acid is 5 × 10 ?7 M. The method was successfully applied to determine total phthalate esters over the range 0.3–30 μg l ?1 in crude and treated wastewaters. 相似文献
14.
The oxidative behavior of 1-[1-(phenylmethyl)butyl]pyrrolidine, prolintane, was studied at a glassy carbon electrode using linear-sweep and differential-pulse voltammetry. The oxidation process was shown to be irreversible using 0.04 M Britton–Robinson buffer and was diffusion-adsorption controlled. Two voltammetric methods were developed for the determination of prolintane using different techniques: linear-sweep and differential-pulse voltammetry. The peak current varied linearly with prolintane concentrations in the range of 1.0 × 10 −5 −2.5 × 10 −4 M, with a detection limit of 8.5 × 10 −6 and 4.0 × 10 −6 M, and with relative standard deviations of 2.1 % and 3.1 %, respectively. The methods were applied to commercial preparations, giving relative errors less than 3.1 % and relative standard deviations lower than 4.8 % ( n = 10). Determination of prolintane (down to the 8.5 × 10 −8 M level) can be performed by using a preconcentration step prior to the determination by differential-pulse voltammetry in 0.04 M Britton–Robinson buffer (pH 8.0) with preconcentration potential of 0.0 V. The detection limit was found to be 6.2 × 10 −8 M (4 min preconcentration) and the relative standard deviation for 2.5 × 10 −7 M prolintane ( n = 5) was 4.6 %. Applicability to human urine analysis is illustrated (recovery 98 ± 2 %). Standard additions method can be used to determine prolintane in real samples of urine. 相似文献
15.
The voltammetric behavior of sulfadimetoxol (SDX) was studied by square-wave techniques, leading to two methods for its determination in aqueous samples and veterinary formulations. The application of the square-wave mode shows the determination of SDX between 1 × 10 −7 M and 2 × 10 −6 M at −0.60 V and for the stripping voltammetry of adsorbed SDX with an accumulation step of 15 s proved to be more sensitive, yielding signals five times larger than those obtained without the accumulation. The determination of SDX was done between 2 × 10 −8 M and 5 × 10 −7 M by stripping mode. The relative standard deviations obtained for concentration levels of SDX as low as 3 × 10 −7 M with square-wave was 3.4 % ( n = 8) and for 2 × 10 −7 M with stripping square-wave was 3.1 % ( n = 8). The methods were satisfactorily applied for determining SDX in four veterinary products. 相似文献
16.
In this work, we reported the development of a nickel metal-organic framework nanosheet array on Ti-mesh (Ni-MOF/TM) as an enzyme-free electrochemical sensing platform for H 2O 2 determination. The as-obtained sensor exhibited outstanding detection properties of H 2O 2, which might be gifted from the large specific surface area, abundant active sites of Ni-MOF nanoarrays. The sensor displayed a good linear range (0.8 μM–4.6×10 3 μM), a detection limit as low as 0.26 μM, a high sensitivity (307.5 μA mM −1 cm −2), and a rapid response. Moreover, this enzyme-free sensor is promising for point-of-care (POC) testing of H 2O 2 in human serum attribute to the excellent performance of Ni-MOF and the simple preparation process of the sensor. 相似文献
17.
An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO 4 solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P A1) & +1.27 V (P A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL −1 (3.7×10 −7−1.9×10 −4 mol L −1), by the detection limit of 0.023 μg mL −1 (8.5×10 −8 mol L −1) for P A1 and 0.028 μg mL −1 (1.1×10 −7 mol L −1) for P A2 in 0.1 mol L −1 HClO 4 solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P A2). 相似文献
18.
The present work describes the first electrochemical investigation and a simple, rapid and modification‐free electroanalytical methodology for quantification of hordenine (a potent phenylethylamine alkaloid) using a boron‐doped diamond electrode. At optimized square‐wave voltammetric parameters, the observed oxidation peak current in 0.1 M HClO 4 at +1.33 V (vs. Ag/AgCl) increased linearly from 5.0 to 100 μg mL ?1 (3.0×10 ?5–6.1×10 ?4 M), with detection limit of 1.3 μg mL ?1 (7.8×10 ?6 M). The applicability of the developed method was tested with the determination of hordenine in the commercial dietary supplement formulations. 相似文献
19.
In this study, a molecularly imprinted electrochemical sensor (MIP/DA) was investigated for selective and sensitive determination of dopamine (DA) by electrochemical polymerization of p-aminothiophenol in the presence of DA on gold electrode. According to electrochemical behaviour of the sensor, gained through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), MIP/DA sensor showed distinctive electron transfer characteristics in comparison to the non-imprinted (NIP/DA) sensor. Besides the MIP/DA sensor showed high selectivity for dopamine through its analyte specific cavities. The sensor had a broad working range of 5.0×10 −8–2.0×10 −7 M with a limit of detection (LOD) of 1.8×10 −8 M and the developed sensor was successfully applied for determination of dopamine in pharmaceutical samples. 相似文献
|