Identification of carbonyl species of weathered LDPE films by curve fitting and derivative analysis of IR spectra

We describe the examination of the weathering degradation of LDPE (low density polyethylene - locally produced B24/2 and imported LDPE 2100T), supplied by two different manufacturers and processed into films for greenhouse coverings, over several months in a sub-Saharan region of Algeria. The three IR regions most affected by weathering degradation are 800–1100 cm⁻¹, 1680–1800 cm⁻¹ and 3300–3600 cm⁻¹. The IR spectral region most affected by the aging process is the carbonyl region. Curve fitting combined with derivative spectroscopy revealed that the composite carbonyl band encompasses more than 10 different oxidation products. The most significant among these in terms of absorbance are carboxylic acids, ketones, aldehydes and esters. The oxidation kinetics with respect to the type of LDPE film shows that B24/2 LDPE undergoes less oxidization than LDPE 2100 T. Calculating the concentrations of different carbonyl species compared to their respective absorbances indicates that the aldehydes are the predominant component of the final compound, rather than the carboxylic acids.     

Effect of cobalt carboxylates on the photo-oxidative degradation of low-density polyethylene. Part-I

The effect of three cobalt carboxylates of increasing chain length, namely cobalt laurate, cobalt palmitate and cobalt stearate on the photo-oxidative degradation of low-density polyethylene (LDPE) films has been investigated. LDPE films containing cobalt carboxylates were irradiated with UV-B light at 30 °C for extended time periods. FTIR spectroscopy, mechanical testing, morphological studies, molecular weight, density and MFI measurements were performed to monitor the degradation behaviour. The results of these studies were analysed to explain the structural and chemical modifications taking place in the polyethylene matrix due to UV-B exposure. FTIR studies indicate that the degradation is dominated by formation of carbonyl and vinyl species. The studies on mechanical properties reveal that samples containing cobalt carboxylates, become mechanically fragile after UV exposure for 400 h, while neat LDPE exhibits insignificant changes during this period. The degradation was found to increase proportionally with increasing chain length and follows the order CoSt₃ > CoPal₃ > CoLau₃. Migration studies were performed on food simulant systems to investigate the applicability of these films for food packaging.     

Effect of benzil and cobalt stearate on the aging of low-density polyethylene films

We report an investigation of the effect of benzil and cobalt stearate on the degradation behaviour of LDPE films. Thin films (70 μ) containing these additives were prepared by sheeting process. The effect of heating, exposure to UV-B and natural weathering of LDPE films in the presence/absence of additives was investigated. Changes in the tensile properties, carbonyl index and density were used to investigate the degradation behaviour. Attempts have been made to correlate the results as a function of mixed additives. In contrast to the activity of typical triplet activators, benzil was found to be incapable of initiating thermal- or photo-degradation of LDPE films. However, an accelerated rate of oxidation was observed, primarily due to cobalt stearate, in the case of compositions containing a combination of benzil and cobalt stearate. All samples were found to be more susceptible to thermo-oxidation than to UV or natural weathering.     

Comparison of the biodegradability of various polyethylene films containing pro-oxidant additives

The biodegradability of high density polyethylene films (HDPE), low density polyethylene films (LDPE) and linear low density polyethylene films (LLDPE) with a balanced content of antioxidants and pro-oxidants (manganese + iron or manganese + iron + cobalt) was studied. Abiotic pre-treatment consisting of photooxidation and thermal oxidation corresponding to about three years of outdoor weathering (including 3-4 months of exposure to daylight) was monitored by FTIR and SEC measurements. The oxidized samples were then inoculated with the strain Rhodococcus rhodochrous in mineral medium, and incubated up to 180 days. The metabolic activity of the bacteria was assessed by measuring adenosine triphosphate content (ATP) and the viability of the cells. Complementary experiments were performed by ¹H NMR spectroscopy to monitor the biodegradation of soluble molecules excreted from the polymer in the incubation medium. Finally SEM was used to visualize the formation of a biofilm at the surface of the polymer. Three samples among the 12 tested were investigated in compost and soil environments. The results show that the main factor controlling the biodegradability of the polyethylene films is the nature of the pro-oxidant additive and to a lesser extent that of the matrix. Except for the samples containing very high content of cobalt additive, the various polymer films were used as substrates by the bacteria.     

High photocatalytic degradation activity of polyethylene containing polyacrylamide grafted TiO2

A novel photocatalytic polyacrylamide grafted TiO₂ (PAM-g-TiO₂) nanocomposite was prepared and embedded into a low density polyethylene (LDPE) plastic. Photocatalytic degradation of the LDPE/PAM-g-TiO₂ composite film was carried out under ambient conditions under ultraviolet light irradiation. The properties of composite film were compared with those of the pure LDPE film by measuring the changes in weight loss, carbonyl index, molecular weight, tensile strength and elongation at break. PAM-g-TiO₂ embedded LDPE showed highly enhanced photocatalytic degradation. Irradiating the LDPE/PAM-g-TiO₂ composite film for 520 h under UV light reduced its weight by 39.85% and average molecular weight (M_w) by 94.60%, while that of pure LDPE film was only 1.03% and 69.59%, respectively. The addition of PAM-g-TiO₂ brought about the good dispersion of TiO₂ in LDPE matrix and improved the hydrophilicity of composite film, which were able to facilitate the degradation of LDPE. The photocatalytic degradation mechanism of the films is briefly discussed.     

含羧酸共生稀土光敏剂的低密度聚乙烯膜紫外光氧化降解

含羧酸共生稀土光敏剂的低密度聚乙烯膜紫外光氧化降解林宜超（福建省测试技术研究所福州３５０００３）近年来，许多作者先后研究并开发出含硬脂酸铈（ＣｅＳｔ３）光敏剂的可控光降解低密度聚乙烯（ＬＤＰＥ）［１，２］、高密度聚乙烯［３］、聚丙烯［４］、聚苯乙烯...     

Oxidative thermal degradation of LDPE and the determination of some thermodynamic quantities

The pyrolysis of polyolefin wastes is one of the possible ways to obtain chemical feedstocks. In this work, the thermal degradation of low density polyethylene, (LDPE), which is a major product within plastics, was investigated in a semi-batch reactor system. First-order rate kinetics approach was chosen and reaction rate coefficients, k, and some thermodynamic quantities determined such as activation energy, reaction enthalpy, free activation enthalpy, and entropy of degradation of LDPE for different air flow rates. We found that the maximum value of some thermodynamic quantities, such as reaction rate coefficient is 0.0243 min⁻¹ at 600 mL min⁻¹ air flow rate and the free activation enthalpy (ΔG^≠) is 148.66 kJ mol⁻¹ at 450 mL min⁻¹ air flow rate and the reaction enthalpy (ΔH^≠) is 57.65 J mol⁻¹ at 623 K temperature conditions. Moreover, we found that the oxidative degradation of LDPE is not spontaneous and has lower energy necessary (for degradation) than non-oxidative degradation processes.     

Greffage de l'acide methacrylique sur des films de poly(chlorure de vinyle) par la methode radiochimique directe

Since PVC films do not swell in pure methacrylic acid (MAA) the films were subjected to gamma-rays while dipped in various mixtures MAACHCl₂. Under such conditions, the grafting proceeds smoothly and its rate exhibits a flat maximum for the mixture containing ca. 50% (molar) monomer. The rate satisfies the relationship Rate = KI^0.6 and the over-all activation energy of the process is 4 kcal/mole. MAA grafted PVC films do not swell in solvents for PMAA (such as water or methanol) even for high grafting ratios. This result is unexpected since PTFE films grafted with either acrylic or methacrylic acid swell to a large extent in water and are excellent membranes. The swelling of the grafted PVC films was investigated in mixtures 1,2-dichloroethylene -methanol. It was found that the extent of swelling was highest in the mixture containing 35% methanol. The unusual swelling properties of these grafted films are attributed to strong polar interactions between PVC and PMAA chains.     

Effect of annealing on hydrophobic stability of plasma deposited fluoropolymer coatings

Fluorinated amorphous carbon (a-C:F) films e.g. plasma polymerised perfluorocyclobutane have long attracted much consideration due to their low surface energy, hydrophobicity, low refractive index, good electrical and thermal insulation and good thermal stability. Although a-C:F films have many advantages, hydrophobic stability over time in air and water remains a major concern. In this study, the effects of weathering conditions on the hydrophobicity of fluorocarbon films prepared from perfluorocyclobutane precursors were examined using water contact angle measurements. It was found that the high initial hydrophobicity of as-deposited films degrades rapidly in humid conditions. The stability of hydrophobicity can be significantly improved when a suitable treatment such as annealing is employed. The mechanism of weathering was explained with the help of a number of morphological and chemical characterisation techniques such as Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). In particular, XPS results demonstrated that a reduction in the overall amount of -CF₃ radical, oxygenation of surface fluorides and the formation of an overlayer all influence the degradation of fluorocarbon in aquatic environment.     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.     

Visible light-induced thione-ene cycloaddition reaction for the surface modification of polymeric materials

A feasible method for the surface modification of polymeric materials with LDPE films as model substrates based on visible light-induced thione-ene cycloaddition reaction is proposed.     

Surface modification of LDPE film by CO2 pulsed laser irradiation

The influence of the pulsed CO₂ laser irradiation on the surface structure of the LDPE film was investigated. Significant changes were observed on the surface of laser treated films as it was verified by the attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy and contact angle-measurement. Formation of polar functional groups onto the LDPE surfaces exhibited by the ATR-FTIR spectra was shown to be strongly dependent on the number of the CO₂ laser pulses. The intensity of the polar groups increased with increasing the number of pulses up to two and then slightly decreased at three laser pulses. This was also confirmed with the contact angle measurements in which the sample subjected to two laser pulses showed the highest wettability i.e. the lowest water drop contact angle. The concentration of peroxide groups formed on the surface of the laser treated films was determined quantitatively by UV spectroscopic method using iodide procedure. The latter results showed a similar trend with the results obtained using FTIR spectroscopy.     

Surface degradation of ethylene-propylene-diene monomer (EPDM) containing 5-ethylidene-2-norbornene (ENB) as diene in artificial weathering environment

Ethylene-propylene-diene monomer (EPDM) containing 5-ethylidene-2-norbornene (ENB) as diene was exposed to an artificial weathering environment produced by a xenon lamp light exposure and weathering equipment for different time periods. The surface chemical changes were detected by Specular Reflection Fourier Transform Infrared (SR-FTIR) spectroscopy, Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The change in surface color, contact angle and morphology was monitored by spectrophotometer, optical contact angle measuring device and Scanning Electron Microscope (SEM). Furthermore, surface energy was calculated through contact angles of water and formamide. The results showed that hydroxyl, carbonyl and ester groups were formed during exposure to this artificial weathering environment. EPDM surface became redder, yellower and lighter in the first stage of aging and then remained almost unchanged. The contact angles of water and formamide decreased to a minimum and then increased slowly. The surface degradation is a zero order reaction. In addition, the plausible degradation mechanism was proposed.     

Multi-component analysis of low-density polyethylene oxidative degradation

The oxidative degradation of polyethylene in various conditions has been studied. In order to gain insight into the oxidation process, a method for the curve-fitting analysis of the IR carbonyl band between 1800 cm⁻¹ and 1600 cm⁻¹ in oxidized low-density polyethylene (LDPE) has been developed. Up to 10 components were needed to fit the band envelope, whose assignments and peak positions were based on the literature and on the synthesis of an appropriate model compound. The determination of the other band parameters, such as peak width and peak shape, necessary for reliable best fitting of the absorbance envelopes, was obtained by overall fitting optimization process. By using the available extinction coefficients, the quantitative determinations of the main oxidized species, i.e. ketones, carboxylic acids, esters, γ-lactones and ketoacids, were obtained with a reasonable confidence by rigorous parameter setting. The method was applied to the IR analysis of LDPE samples oxidized in different conditions (under thermal and irradiation stimulation), either as beads or films, as a function of time. Total hydroperoxide concentrations were also quantitatively estimated by a modified iodometric titration procedure. A good linear correlation between concentrations estimated by chemical titration and by intensity analysis of the free hydroperoxide IR band was observed.     

Water barrier characteristics of plasma polymers of perfluorocarbons

Perfluorocarbon monomers such as C₂F₄, C₂F₆, C₄F₁₀, and mixtures thereof with H₂, were subjected to plasma polymerization and deposited onto low-density polyethylene (LDPE) substrates. The effect of plasma conditions, surface characteristics, and surface dynamics of plasma polymers on their ability to improve the resistance to water vapor permeation was investigated. An optimum discharge energy density was found for a monomer which provided the greatest reduction water vapor permeability. Although all of the plasma polymers show higher hydrophobicity than polyethylene, the reduction in water vapor permeability is not uniquely related to water contact angle. The surface-dynamic stability of a plasma polymer surface was found to be the key factor in determining the barrier performance of the plasma polymer. The extent of change of surface-configuration after water immersion strongly correlated with the improvement in the water vapor permeation resistance. Plasma polymers with the higher surface-dynamic stability provided the better water barrier coating applied on LDPE films. © 1996 John Wiley & Sons, Inc.     

Optical and mechanical properties of films obtained by plasma decomposition of hexamethyldisilazane

Films of SiC _x N _y H _z composition are obtained by chemical deposition from the vapor phase via the activation of high-frequency discharge plasma (PECVD). The organosilicon compound hexamethyldisilazane, which contains all the atoms needed for the formation of films, is used as our initial material. Physicochemical properties of the films are studied by spectroscopy of surface acoustic waves, measuring the bending of a film-substrate system, ellipsometry, and infrared spectroscopy. Important features of the films?? structure are established. It is shown that at temperatures of deposition below 400°C, films contain chemical bonds of an organic nature, have very low values of density and the Young modulus, and exhibit high levels of elasticity, indicating their polymer-like structure. It is established that at higher temperatures of deposition, films are inorganic composite materials.     

Structure,Composition, Mechanical,and Tribological Properties of BCN Films Deposited by Plasma Enhanced Chemical Vapor Deposition

In this work thin BCN films were deposited by plasma enhanced chemical vapor deposition (PECVD) using chloridic precursors. Through adjusting the BCl₃ content in the inlet gas mixture the chemical composition of the deposited films was changed from carbon rich to boron rich. Based on optical emission spectroscopy (OES) measurements, a correlation between film composition and precursor species concentration in the plasma was established. The films were amorphous as detected by grazing incidence X-ray diffraction (GIXRD). The hardness and the elastic modulus have maximal values of 25.5±1.2 and 191±6 GPa, respectively, for the films with a boron concentration of 45.2 at.%. GIXRD data suggest that a depletion in boron content may initiate the formation of graphitic domains in the amorphous matrix. The observed degradation of the mechanical properties is associated with the graphitization. The tribological behavior was studied with a tribometer operated in pin-on-plate configuration at the temperatures 25 and 400°C. The wear mechanisms were discussed with respect to the formation of a boric acid surface layer which was detected by reflection electron energy loss spectroscopy (REELS) analysis.     

Novel ethylene/norbornene copolymers as nonreleasing antioxidants for food‐contact polyolefinic materials

An efficient procedure for the copolymerization of ethylene (E) with a novel norbornenic comonomer (N_ArOH) bearing a stabilizing moiety analogous to commercial antioxidant 2,6‐di‐tert‐butyl‐4‐methylphenol (BHT) is successfully developed. This study is aimed at: i) tuning the concentration of the stabilizing function along the polymer chain, and ii) preparing “nonreleasing” polymeric additives specifically destined to protect commercial low‐density polyethylene (LDPE). Films obtained from blends of the novel E/N_ArOH copolymers with an antioxidant‐free LDPE matrix are characterized by superior thermal, thermo‐oxidative, and photostability when compared not only with neat LDPE films but also with films stabilized by the commercial BHT additive. Specific migration tests conducted in order to investigate the nonreleasing character of the novel macromolecular additives confirm the reduced risk of migration, from the films into food simulants, of unreacted comonomer or degradation products bearing the antioxidant moiety. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1007–1016     

Acquired biodegradability of polyethylenes containing pro-oxidant additives

Biodegrability of high density polyethylene film (HDPE) and low density polyethylene film (LDPE) both containing a balance of antioxidants and pro-oxidants was studied with defined microbial strains particularly with Rhodococcus rhodochrous and Nocardia asteroides in mineral medium. After an abiotic pre-treatment consisting of photooxidation and thermo-oxidation corresponding to about 3 years of outdoor weathering the samples were inoculated, incubated up to 200 days and during the period their metabolic activities were followed by measuring adenosine triphosphate content. Simultaneously the cultures were also monitored by optical microscopy and FTIR spectroscopy. The first initial phase of fast growth caused by the presence of low molecular extractable compounds was followed by a long period of stabilized metabolic activity suggesting that microorganisms continued to gain energy from the substrate but evidently at a much slower rate. Complementary analysis performed at the end of incubation revealed that during the experiment time biodegradation processes probably affected surface layer of materials only.     

Surface-enhanced raman scattering (SERS) on chemically prepared silver film

Silver films were prepared by homogeneous chemical reduction methods. These films were found to exhibit a strong SERS effect. SER spectra of p-nitrobenzoic acid, thiophenol, and 2,2′-bipyridine have been taken to illustrate the usefulness of the new sample preparation technique.