Developmental validation of the Microreader Group Y Direct ID System: A novel six-dye typing system with 54 Y-chromosomal loci for forensic application

Y-chromosome, as a gender-determined biological marker, is inherited only between fathers and sons. The Y-chromosome short tandem repeats (Y-STRs) play an essential role in paternity lineage tracing as well as sexual assault cases. The Microreader Group Y Direct ID System as a six-dye multiplex amplification kit, including 53 Y-STR and one Y-Indel locus, would improve performance and aid in obtaining more information through a greater number of loci with high polymorphism. In the present study, to verify the accuracy and efficiency of the kit, developmental validation was conducted by investigating sensitivity, species specificity, PCR inhibition, male–male and male–female mixtures, and reproducibility. The kit was tested using 311 male samples from Han and Qiang populations in Sichuan Province. The results showed that this kit had fairly high power for forensic discrimination (Han: haplotype diversity [HD] = 1, Qiang: HD = 0.999944). Additionally, 44 confirmed father–son pairs were also genotyped, among which 69 distinct haplotypes could be obtained. These father–son pairs cannot be distinguished by commonly used Y-STR panels, indicating that adding these extra Y-STRs to a single panel can achieve better discrimination performance. Collectively, the Microreader Group Y Direct ID System is robust and informative for forensic applications.     

The development of an 18-locus Y-STR system for forensic casework

The aim of the present work was to improve the discriminatory potential, and hence the probative value, of Y-STR-based testing by extending the set of Y chromosome STR loci available for forensic casework. In accordance with the requirements of a Y chromosome multiplex analytical system developed specifically for forensic casework use, we have sought to maximize the number of loci able to be co-amplified, ensure appropriate assay sensitivity (1–2 ng of input genomic DNA), balance inter-locus signals and minimize confounding female DNA artifacts. Two Y chromosome STR systems, multiplex I (MPI) and multiplex II (MPII), have been developed which permit the robust co-amplification of 18 Y-STRs. The loci include DYS19, DYS385(a) and (b), DYS388, DYS389I and II, DYS390, DYS391, DYS392, DYS393, DYS425, DYS434, DYS437, DYS438, DYS439, Y-GATA-C4, Y-GATA-A7.1 (DYS460) and Y-GATA-H4. The two multiplex systems are robust over a wide range of primer, magnesium, and DNA polymerase concentrations and perform well under a variety of cycling conditions. Complete male haplotypes can be obtained with as little as 100–250 pg of template DNA. Although a limited number of female DNA artifacts are observed in mixed stains in which the male DNA comprises 1/100 of the total, the male profile is easily discernible. Slightly modified versions of MPI and MPII demonstrate a significant reduction in female artifacts. Thus, it may not be necessary to employ a differential extraction strategy to obtain a male haplotype (or haplotypes in the case of multiple male donors) in cases of sexual assault. The potential utility of MPI and MPII for forensic casework is exemplified by their ability to dissect out the male haplotype in post-coital vaginal swabs and to determine the number of male donors in mixed semen stains.This study has emphasized the need for novel Y-STR multiplexes developed for forensic use to undergo a series of validation exercises that go beyond simply optimizing the PCR reaction conditions. Specifically, stringent performance checks on their efficacy need to be carried out using casework-type specimens in order to determine potential confounding effects from female DNA.     

Development and validation of a new multiplex Y-STR panel designed to increase the power of discrimination

In an attempt to increase the discrimination capacity (DC) and reduce the adventitious match probability, a 6-dye multiplex Y-chromosomal short tandem repeat (Y-STR) panel named Y34plex was constructed that combined 25 Y-chromosomal markers (DYS456, DYS627, DYS390, DYS570, DYS635, DYS385a/b, DYS448, DYS437, DYS533, DYS449, DYS481, DYS392, DYS391, DYS389I, DYS460, YGATAH4, DYS438, DYS389II, DYS19, DYS458, DYF387S1a/b, DYS439, DYS393, DYS576, and DYS518) in widely used commercial kits, with nine highly polymorphic Y-STR loci (DYS557, DYS527a/b, DYS593, DYS444, DYS596, DYS643, DYS447, DYS549, and DYS645). The Y34plex is a promising type system to distinguish both unrelated and related male individuals due to the incorporation of rapidly mutated Y-STR loci. A validation study of the Y34plex was performed and followed the guidelines of the Scientific Working Group on DNA analysis methods. Results show that full Y-STR profiles were obtained from male/female DNA mixtures with 125 pg of male DNA in the presence of 50 ng of female DNA. The ability to tolerate polymerase chain reaction inhibitors commonly contained in forensic casework samples demonstrated the applicability and robustness of the Y34plex. Compared with the Yfiler Plus kit, the novel panel showed an increased power of discrimination in Chinese Wuxi Han population (n = 434). The overall haplotype diversity of the Y34plex was 0.999606, whereas DC value was 0.956221, which is suitable for use on forensic paternal investigation.     

A convenient guideline to determine if two Y‐STR profiles are from the same lineage

Y chromosome STR loci are used in forensics primarily for identification purposes by determining the male lineages. The Henan province in China has established a large Y‐STR (>200 000 profiles) database for criminal investigations. A large proportion of the Y‐STR profiles in the database were generated using either the Applied Biosystems Yfiler^? or Yfiler^? Plus PCR Amplification kits. The additional loci in the Yfiler Plus kit as compared to the Yfiler kit results in a concomitant cumulative mutation rate increase across the loci. Therefore, in those cases when two profiles have one to a few mismatched loci, it is difficult to determine if they are from the same lineage. In this study, 7405 unrelated male profiles were manually selected from the database. Analysis showed higher power of discrimination than the corresponding Yfiler haplotypes. Further, the distributions of the number of mismatched loci and the mismatched steps were generated for father‐son, grandfather‐grandson, uncle‐nephew, and cousins (i.e. one, two, three, and four meioses, respectively) by exhaustive pairwise comparison of the unrelated profiles using a dynamic programming approach. The same distributions were generated for unrelated pairs with mutation rates of the loci. With the distributions, the false negative and false positive rates were determined. Two Yfiler profiles with ≤2 mismatched loci or ≤2 steps are more likely from the same lineage than unrelated lineages, and two Yfiler Plus profiles with ≤4 mismatched loci or ≤5 mismatched steps are more likely from the same lineage.     

Genetic diversity and haplotype structure of 24 Y‐chromosomal STR in Chinese Hui ethnic group and its genetic relationships with other populations

In the present study, 24 Y‐chromosomal short tandem repeat (Y‐STR) loci were analyzed in 115 unrelated Hui male individuals from Haiyuan county or Tongxin county, Ningxia Hui Autonomous Region, China, to evaluate the forensic application of the 24 STR loci and to analyze interpopulation differentiations by making comparisons between the Hui group data and previously published data of other 13 populations. A total of 115 different haplotypes were observed on these 24 Y‐STR loci. The gene diversities ranged from 0.4049 (DYS437) to 0.9729 (DYS385a, b). The overall haplotype diversity was 1 at AGCU 24 Y‐STR loci level, while the values were reduced to 0.999237, 0.996949, and 0.996644 at the Y‐filer 17 loci, 11 Y‐STR loci of extended haplotype and 9 Y‐STR loci of minimal haplotype levels, respectively; whereas, haplotype diversity for additional 7 loci (not included in Y‐filer 17 loci) was 0.995271. The pairwise F_ST, multidimensional scaling plot and neighbor‐joining tree indicated the Hui group had the closest genetic relationship with Sala in the paternal lineage in the present study. In summary, the results in our study indicated the 24 Y‐STRs had a high level of polymorphism in Hui group and hence could be a powerful tool for forensic application and population genetic study.     

Current trends in quantitative proteomics

It was inevitable that as soon as mass spectrometrists were able to tell biologists which proteins were in their samples, the next question would be how much of these proteins were present. This has turned out to be a much more challenging question. In this review, we describe the multiple ways that mass spectrometry has attempted to address this issue, both for relative quantitation and for absolute quantitation of proteins. There is no single method that will work for every problem or for every sample. What we present here is a variety of techniques, with guidelines that we hope will assist the researcher in selecting the most appropriate technique for the particular biological problem that needs to be addressed. We need to emphasize that this is a very active area of proteomics research—new quantitative methods are continuously being introduced and some ‘pitfalls’ of older methods are just being discovered. However, even though there is no perfect technique—and a better technique may be developed tomorrow—valuable information on biomarkers and pathways can be obtained using these currently available methods Copyright © 2009 John Wiley & Sons, Ltd.     

The Y-STR landscape of coastal southeastern Han: Forensic characteristics,haplotype analyses,mutation rates,and population genetics

The Y-STR landscape of Coastal Southeastern Han (CSEH) living in Chinese southeast areas (including Guangdong, Fujian, and Zhejiang provinces) is still unclear. We investigated 62 Y-STR markers in a reasonably large number of 1021 unrelated males and 1027 DNA-confirmed father-son pairs to broaden the genetic backgrounds of CSEH. In total, 85 null alleles, 121 off-ladder alleles, and 95 copy number variants were observed, and 1012 distinct haplotypes were determined with the overall HD and DC values of 0.999974 and 0.9912. We observed 369 mutations in 76 099 meiotic transfers, and the average estimated Y-STR mutation rate was 4.85 × 10^–3 (95% CI, 4.4 × 10^–3–5.4 × 10^–3). The Spearman correlation analyses indicated that GD values (R² = 0.6548) and average allele sizes (R² = 0.5989) have positive correlations with Y-STR mutation rates. Our RM Y-STR set including 8 candidate RM Y-STRs, of which DYS534, DYS630, and DYS713 are new candidates in CSEH, distinguished 18.52% of father–son pairs. This study also clarified the population structures of CSEH which isolated in population-mixed South China relatively. The strategy, SM Y-STRs for familial searching and RM Y-STRs for individual identification regionally, could be applicable based on enough knowledge of the Y-STR mutability of different populations.     

Real-life applications of the MULVADO software package for processing DOSY NMR data

MULVADO is a newly developed software package for DOSY NMR data processing, based on multivariate curve resolution (MCR), one of the principal multivariate methods for processing DOSY data. This paper will evaluate this software package by using real-life data of materials used in the printing industry: two data sets from the same ink sample but of different quality. Also a sample of an organic photoconductor and a toner sample are analysed. Compared with the routine DOSY output from monoexponential fitting, one of the single channel algorithms in the commercial Bruker software, MULVADO provides several advantages. The key advantage of MCR is that it overcomes the fluctuation problem (non-consistent diffusion coefficient of the same component). The combination of non-linear regression (NLR) and MCR can yield more accurate resolution of a complex mixture. In addition, the data pre-processing techniques in MULVADO minimise the negative effects of experimental artefacts on the results of the data. In this paper, the challenges for analysing polymer samples and other more complex samples will also be discussed.     

Multiplex amplified product-length polymorphism analysis for rapid detection of human mitochondrial DNA variations.

A number of mutations in coding and noncoding regions of mitochondrial DNA (mtDNA) have previously been studied. In the present study, we simultaneously typed six mutation sites in the coding region by use of amplified product-length polymorphism (APLP) analysis. The mtDNA variations of 2471 individuals from 20 populations of Japanese, Korean, Chinese, and German were examined and classified into 18 haplotypes. Two of these haplotypes, B1 (estimated ancestral haplotype) and C1, were distributed among all populations tested. However, the haplotypes A1, A2, B2, B3, and C2 were mostly restricted to the Mongoloid populations, whereas haplotypes B5 and C5 appeared almost exclusively in the German population. Phylogenetic analysis by the neighbor-joining method revealed that the Japanese populations were more closely related to each other than to the other East Asian populations surveyed. The multiplex APLP method is suitable for large-scale screening studies of mtDNA variability because it is both rapid and economical.     

Disposable microfluidic substrates: transitioning from the research laboratory into the clinic

As more microfluidic applications emerge for clinical diagnostics, the choice of substrate and production method must be considered for eventual regulatory approval. In this review, we survey recent developments in disposable microfluidic substrates and their fabrication methods. We note regulatory approval for disposable microfluidic substrates will be more forthcoming if the substrates are developed with the United States Pharmacopeia's biocompatibility compliance guidelines in mind. We also review the recent trend in microfluidic devices constructed from a hybrid of substrates that takes advantage of each material's attributes.     

AROHap: An effective algorithm for single individual haplotype reconstruction based on asexual reproduction optimization

In this paper, a method for single individual haplotype (SIH) reconstruction using Asexual reproduction optimization (ARO) is proposed. Haplotypes, as a set of genetic variations in each chromosome, contain vital information such as the relationship between human genome and diseases. Finding haplotypes in diploid organisms is a challenging task. Experimental methods are expensive and require special equipment. In SIH problem, we encounter with several fragments and each fragment covers some parts of desired haplotype. The main goal is bi-partitioning of the fragments with minimum error correction (MEC). This problem is addressed as NP-hard and several attempts have been made in order to solve it using heuristic methods. The current method, AROHap, has two main phases. In the first phase, most of the fragments are clustered based on a practical metric distance. In the second phase, ARO algorithm as a fast convergence bio-inspired method is used to improve the initial bi-partitioning of the fragments in the previous step. AROHap is implemented with several benchmark datasets. The experimental results demonstrate that satisfactory results were obtained, proving that AROHap can be used for SIH reconstruction problem.     

Novel software for the assignment of peaks from tandem mass spectrometry spectra of synthetic polymers

Novel software has been developed to aid the interpretation of tandem mass spectrometry (MS/MS) data from synthetic polymers. The software is particularly focused toward aiding the end-group determination of these materials by significantly speeding up the interpretation process. This allows information on the initiator and/or chain transfer agents, used to generate the polymer, and the mechanism of termination to be inferred from the data much more rapidly. The software allows the validity of hypothesized structures to be rapidly tested by automatically annotating the data file using previously proposed fragmentation rules for synthetic polymers. Low-energy collision-induced dissociation (CID) data from methacrylate, styrene, and polyether oligomers are used as example data for the software. Exact-mass CID information was used to aid the understanding of the dissociation mechanism of the polymers. The software can use exact-mass data to provide more confidence in the results. The MS/MS results indicate that the fragmentation pathways are those previously proposed for these polymers.     

Use of multi‐InDels as novel markers to analyze 13 X‐chromosome haplotype loci for forensic purposes

Many studies have been proposed to identify insertion/deletion (InDel) polymorphisms in humans for forensic genetic studies. However, the discriminatory power of InDels is limited by the poor polymorphisms of diallelic markers. To improve their discriminatory power, we developed multi‐InDel, a novel autosomal marker comprising more than two InDel loci that are tightly linked by their physical position and combined into a specific marker by a pair of PCR primers. This strategy gives at least three haplotypes for each multi‐InDel marker. Such markers can be potentially very useful in forensic applications. In this study, we focused on multi‐InDel markers located on X chromosome (ChrX). A multiplex system with 13 multi‐InDel markers, including 28 InDel loci in ChrX, was developed. To validate the multi‐InDel panel, the haplotype distribution in a population sample and in a set of pedigrees was investigated. This study demonstrates usefulness of these markers for individual identification and relationship studies. We highlight the fact that the multi‐InDel markers located on ChrX can provide new supporting information for complex kinship testing.     

Clinical quality vs analytical performance: what are the right targets and target values?

For optimal performance of laboratory tests, testing processes should be designed to provide clinically useful quality and QC procedures should be selected to assure that the necessary clinical quality is achieved in routine production. One important issue is how to define clinical quality. Today’s practice guidelines, quality regulations, and quality standards provide some targets for analytical quality, but they fail to adequately address clinical quality. Target values for precision and accuracy are not the same as clinical quality, though analytical performance certainly contributes to the clinical quality of test results. How can we proceed in our quest to improve quality when there are inconsistencies and inadequacies in the specifications found in practice guidelines, regulations, and standards? Today target values are often being set for the wrong targets. A better approach is possible if we focus on test interpretation guidelines to define clinical quality, then derive specifications for the accuracy and precision that are appropriate for the method, as well the QC rules and numbers of control measurements that are necessary to guarantee the desired quality will be achieved in routine operation of the testing process.     

Analysis of 17 Y‐STR loci haplotype and Y‐chromosome haplogroup distribution in five Chinese ethnic groups

To investigate genetic diversity in Chinese populations, 706 unrelated male individuals from five ethnic groups (Han, Korean, Hui, Mongolian, and Tibetan, respectively) were analyzed with 17 Y‐chromosomal STRs. The haplotype diversity was 0.99985 in the combined data. A total of 675 distinct haplotypes were observed, of which 649 were unique. Y‐chromosome haplogroups in the five groups were also predicted with Y‐STR haplotypes. Genetic distance between the five studied ethnic groups and other published groups was analyzed by analysis of molecular variance and visualized in a multidimensional scaling plot. In conclusion, the 17 Y‐STR loci are highly polymorphic markers in the five groups and hence are very useful in forensic application, population genetics, and human evolution studies.     

Haplotype assembly from aligned weighted SNP fragments

Given an assembled genome of a diploid organism the haplotype assembly problem can be formulated as retrieval of a pair of haplotypes from a set of aligned weighted SNP fragments. Known computational formulations (models) of this problem are minimum letter flips (MLF) and the weighted minimum letter flips (WMLF; Greenberg et al. (INFORMS J. Comput. 2004, 14, 211-213)). In this paper we show that the general WMLF model is NP-hard even for the gapless case. However the algorithmic solutions for selected variants of WMFL can exist and we propose a heuristic algorithm based on a dynamic clustering technique. We also introduce a new formulation of the haplotype assembly problem that we call COMPLETE WMLF (CWMLF). This model and algorithms for its implementation take into account a simultaneous presence of multiple kinds of data errors. Extensive computational experiments indicate that the algorithmic implementations of the CWMLF model achieve higher accuracy of haplotype reconstruction than the WMLF-based algorithms, which in turn appear to be more accurate than those based on MLF.     

Approximate Population Balance Equations for Aggregation-Breakage Processes

A number of approximate methods for modeling aggregation of particulate suspensions have been extended to simulate breakup as well and have been tested by comparison with rigorous solutions for conditions representative of most aggregation-fragmentation processes. The simplest methods, based on a geometric discretization with size ratio equal to two, can calculate satisfactorily the average values of the population for particularly well-conditioned situations only and, even in those cases, are not capable of predicting the shape of the particle size distribution. Therefore more complex methods are usually required, capable of using denser size discretization. The characteristics of these models and the guidelines for their choice are discussed in the paper, by considering their accuracy, ability to produce error estimates, ease of implementation and speed. Copyright 2000 Academic Press.     

The errors of our ways: taking account of error in computer-aided drug design to build confidence intervals for our next 25 years

The future of the advancement as well as the reputation of computer-aided drug design will be guided by a more thorough understanding of the domain of applicability of our methods and the errors and confidence intervals of their results. The implications of error in current force fields applied to drug design are given are given as an example. Even as our science advances and our hardware become increasingly more capable, our software will be perhaps the most important aspect in this realization. Some recommendations for the future are provided. Education of users is essential for proper use and interpretation of computational results in the future.     

Epitope prediction based on random peptide library screening: benchmark dataset and prediction tools evaluation

Epitope prediction based on random peptide library screening has become a focus as a promising method in immunoinformatics research. Some novel software and web-based servers have been proposed in recent years and have succeeded in given test cases. However, since the number of available mimotopes with the relevant structure of template-target complex is limited, a systematic evaluation of these methods is still absent. In this study, a new benchmark dataset was defined. Using this benchmark dataset and a representative dataset, five examples of the most popular epitope prediction software products which are based on random peptide library screening have been evaluated. Using the benchmark dataset, in no method did performance exceed a 0.42 precision and 0.37 sensitivity, and the MCC scores suggest that the epitope prediction results of these software programs are greater than random prediction about 0.09-0.13; while using the representative dataset, most of the values of these performance measures are slightly improved, but the overall performance is still not satisfactory. Many test cases in the benchmark dataset cannot be applied to these pieces of software due to software limitations. Moreover chances are that these software products are overfitted to the small dataset and will fail in other cases. Therefore finding the correlation between mimotopes and genuine epitope residues is still far from resolved and much larger dataset for mimotope-based epitope prediction is desirable.