Chemiluminescence of bis(2,4,6-trichlorophenyl) oxalate in aqueous micellar systems

The chemiluminescent reaction of bis(2,4,6-trichlorophenyl) oxalate (TCPO) in aqueous micellar systems is compared with the reaction in a mixture of acetonitrile and aqueous phosphate buffer. The chemiluminescence was studied in batch experiments with perylene as the fluorophore. The oxidation of TCPO produced the same intensity of chemiluminescence in the buffered acetonitrile as in Arkopal N-300 micelles, the best micellar system. The solubility of TCPO in an aqueous micellar system is greater than that in the acetonitrile/aqueous buffer (80:20, v/v), but TCPO is less stable in the former system.     

Minireview: A Caritical Review of the Transition Metal Ions Influence on Peroxyoxalate Chemiluminescence

ABSTRACT

A detailed study and evaluation of the presence of Cr(III), Zn(II) and Pb(II) and various parameters affecting the intensity of the chemiluminescent reaction of TCPO and 2-NPO with hydrogen peroxide in the presence of 3-aminofluoranthene, as the fluorophore, and imidazole (IMI) as catalyst, is presented. Depending on the unprotonated imidazole and fluorophore concentrations, these metal ions enhance the intensity of the fluorophore at pH's higher than 8.0. At pH = 7.0, in the presence of IMI/HIMI⁺ (IMI = 1×10^?2 mol.L^?1), tris(hydroxymethyl)aminomethane or HPO₄ ^2?/H₂PO₄ ^? buffers, no effect of these metal ions was observed. A critical comparison with the data reported in the literature is presented.     

Determination of gentamicin in pharmaceutical formulations using peroxyoxalate chemiluminescent detection in flow-injection analysis

A simple and sensitive procedure for the determination of gentamicin is presented, based on the use of the peroxyoxalate chemiluminescent (PO-CL) system in presence of imidazole as a catalyst. The gentamicin has to be previously derivatized with o-phthaladehyde (OPA) in order to obtain a fluorophore, which participates in the PO reaction, producing a CL emission proportional to the gentamicin concentration. The method is developed by using a particular flow-injection analysis (FIA) manifold, employing sodium dodecyl sulfate (SDS) micellar medium as a carrier in order to avoid the degradation of PO in water. The optimization of the instrumental and chemical variables affecting the CL reaction was rigorously carried out by using experimental design methodology. The method has been successfully applied to pharmaceutical formulations.     

Kinetics of two pathways in peroxyoxalate chemiluminescence

It has been shown that 1,1'-oxalyldiimidazole (ODI) is formed as an intermediate in the imidazole-catalyzed reaction of oxalate esters with hydrogen peroxide. Therefore, the kinetics of the chemiluminescence reaction of 1,1'-oxalyldiimidazole (ODI) with hydrogen peroxide in the presence of a fluorophore was investigated in order to further elucidate the mechanism of the peroxyoxalate chemiluminescence reaction. The effects of concentrations of ODI, hydrogen peroxide, imidazole (ImH), the general-base catalysts lutidine and collidine, and temperature on the chemiluminescence profile and relative quantum efficiency in the solvent acetonitrile were determined using the stopped-flow technique. Pseudo-first-order rate constant measurements were made for concentrations of either H2O2 or ODI in large excess. All of the reaction kinetics are consistent with a mechanism in which the reaction is initiated by a base-catalyzed substitution of hydrogen peroxide for imidazole in ODI to form an imidazoyl peracid (Im(CO)2OOH). In the presence of a large excess of H2O2, this intermediate rapidly decays with both a zero- and first-order dependence on the H2O2 concentration. It is proposed that the zero-order process reflects a cyclization of this intermediate to form a species capable of exciting a fluorophore via the "chemically initiated electron exchange mechanism" (CIEEL), while the first-order process results from the substitution of an additional molecule of hydrogen peroxide to the imidazoyl peracid to form dihydroperoxyoxalate, reducing the observed quantum yield. Under conditions of a large excess of ODI, the reaction is more than 1 order of magnitude more efficient at producing light, and the quantum yield increases linearly with increasing ODI concentration. Again, it is proposed that the slow initiating step of the reaction involves the substitution of H2O2 for imidazole to form the imidazoyl peracid. This intermediate may decay by either cyclization or by reaction with another ODI molecule to form a cyclic peroxide that is much more efficient at energy transfer with the fluorophore. The reaction kinetics clearly distinguishes two separate pathways for the chemiluminescent reaction.     

Activatable Near-Infrared Versatile Fluorescent and Chemiluminescent Dyes Based on the Dicyanomethylene-4H-pyran Scaffold: From Design to Imaging and Theranostics

Activatable fluorescent and chemiluminescent dyes with near-infrared emission have indispensable roles in the fields of bioimaging, molecular prodrugs, and phototheranostic agents. As one of the most popular fluorophore scaffolds, the dicyanomethylene-4H-pyran scaffold has been applied to fabricate a large number of versatile activatable optical dyes for analytes detection and diseases diagnosis and treatment by virtue of its high photostability, large Stokes shift, considerable two-photon absorption cross-section, and structural modifiability. This review discusses the molecular design strategies, recognition mechanisms, and both in vitro and in vivo bio-applications (especially for diagnosis and therapy of tumors) of activatable dicyanomethylene-4H-pyran dyes. The final section describes the current shortcomings and future development prospects of this topic.     

A study of the chemiluminescence of some acidic triphenylmethane dyes

Chemiluminescence was observed when some acidic triphenylmethane dyes were oxidized with hydrogen peroxide in alkaline solution. Trace amounts of Co(II) catalysed this chemiluminescent reaction strongly, especially in the presence of the cationic surfactant cetyltrimethylammonium bromide. The chemiluminescence spectra of some compounds and the absorption spectra of some products of the chemiluminescent reactions were investigated, and some acidic triphenylmethane dyes were studied by the Hückel molecular orbital method. On the basis of these investigations, a possible mechanism for this chemiluminescent reaction, and an initial explanation for the relationship between the structure of the reagents and their chemiluminescent behaviour were proposed. The optimum conditions for use of some of the chemiluminescent reaction systems were selected by means of the modified simplex method, and a chemiluminescent analytical method for determination of ultratrace amounts of cobalt was established, with a detection limit of 5 pg/ml. It was used for analysis of natural water samples, and good results were obtained.     

Chemiluminescence detection of five-membered heteroaromatic compounds using electrogenerated tris(2,2'-bipyridine)-ruthenium(III).

Heteroaromatic compounds, such as 2,5-dimethylthiophene, 2,5-dimethylpyrrole, and 2,5-dimethylfuran, were found to act as reducing agents for the tris(2,2'-bipyridine)ruthenium(III), Ru(bpy)3(3+), chemiluminescent reaction. In order to characterize the chemiluminescent reaction of Ru(bpy)3(3+) with heteroaromatic compounds, we have investigated various mono-, di-, and tri-heteroaromatic compounds. The pi-electron density and stability of aromatic rings influence the chemiluminescent efficiency of the reaction. Above all, 2,5-dimethylthiophene produced strong chemiluminescence under acidic conditions. In addition, we confirmed that the rate of the chemiluminescent reaction of Ru(bpy)3(3+) with 2,5-dimethylthiophene is very fast.     

金属离子Cu~(2+)，Co~(2+)，Ni~(2+)的微芯片电泳分离及化学发光检测

根据流动注射－化学发光的通用实验装置图，设计并通过标准光刻技术，湿化 学刻蚀及热键合技术制作了玻璃微芯片。在该芯片上将毛细管电泳分离与化学发光 检测相联用，鲁米诺和H_2O_2化学发光反应溶液通过实验室自制的微流泵输送。对 所用电压，缓冲溶液和发光试剂流速等实验条件进行了优化。在所选的最佳条件下 ，成功地实现了金属离子Cu~(2+)，Co~(2+)，Ni~(2+)的电泳分离－化学发光检测， 过渡金属离子。     

Prediction of the chemiluminescent behaviour of phenols and polyphenols

A paper from this laboratory 'J. Anal. Chem. 73 (2001) 4301' was recently published and dealing with the first attempt to apply molecular connectivity calculations to predict a chemical property with analytical usefulness; namely, the chemiluminescent behaviour of substances when react with common strong oxidants in liquid phase. In the present work, the usefulness of molecular topology on the search for new chemiluminescent compounds is clearly demonstrated. The proposed discriminant equation, represented a success of 92.7% in the prediction. The present paper is the further step from the cited paper; it is dealing on the application of molecular connectivity calculations (former discriminant equation 'J. Anal. Chem. 73 (2001) 4301') to predict the chemiluminescent behaviour of phenols and polyphenols when they react with common oxidants in liquid phase. A number of phenols and polyphenols (close to 100) were theoretically studied by means of the discriminant equation 'J. Anal. Chem. 73 (2001) 4301', being some of them predicted as chemiluminescent with a high probability. These theoretical predictions have been empirically checked through a continuous flow manifold. A number of 33 compounds, selected between those which chemiluminescent behaviour was predicted, were assayed. A success of 100% over the theoretical predictions was obtained.     

Immunolabeling for correlative light and electron microscopy on ultrathin cryosections.

Correlative labeling permits colocalization of molecular species for observation of the same sample in light (LM) and electron microscopy (EM). Myosin bands in ultrathin cryosections were labeled using both fluorophore conjugated to secondary antibody (IgG) and colloidal gold (cAu) particles conjugated to primary IgG as reporters for LM and transmission electron microscopy (TEM), respectively. This technique allows rapid evaluation of labeling via LM, prior to more time-consuming observations with TEM and also yields two complementary data sets in one labeling procedure. Quenching of the fluorescent signal was inversely related to the distance between fluorophore and cAu particles. The signal from fluorophore conjugated to secondary antibody was inversely proportional to the size of cAu conjugated to primary antibody. Where fluorophore and cAu were bound to the same antibody, the fluorescence signal was nearly completely quenched regardless of fluorophore excitation or emission wavelength and regardless of particle size, 3 nm and larger. Colloidal metal particles conjugated to primary antibody provide high spatial resolution for EM applications. Fluorophore conjugated to secondary antibody provides spatial resolution well within that of conventional fluorescence microscopy. Use of fluorescent secondary antibody moved the fluorophore a sufficient distance from the cAu particles on the primary antibody to limit quenching of fluorescence.     

Simultaneous determination of copper(II) and cobalt(II) by ion chromatography coupled with chemiluminescent detection.

In the absence of any special luminescent reagents, a weakly chemiluminescent emission was observed during the decomposition of hydrogen peroxide, catalyzed by transition-metal ions, such as Cu(II) and Co(II), in basic aqueous solution. The chemiluminescent intensity was significantly enhanced by the addition of ethyldimethylcetylammonium bromide and uranine. The signal-to-noise ratio (S/N) was proportional to the concentrations of Cu(II) and Co(II). Based on these phenomena, a flow-injection chemiluminescent method for the simultaneous separation and determination of Cu(II) and Co(II) was developed. The detection limits of the present chemiluminescent method for Cu(II) and Co(II) were 7.5 and 0.01 ng/ml, respectively. After ion chromatographic separation of Cu(II) and Co(II) by an IonPac CS5A column with oxalic acid and lithium hydroxide monohydrate as the eluent, the present chemiluminescent system was used as a post-column detector for these two transition metal ions in natural water samples.     

Chemiluminescence behavior based on oxidation reaction of rhodamine B with cerium(IV) in sulfuric acid medium

The chemiluminescence (CL) of the rhodamine B (RhB)-cerium(IV) system was investigated by flow-injection. Rhodamine B was suggested to be a suitable chemiluminescent reagent in acidic conditions. When the concentration of rhodamine B was 100 mg l⁻¹ and cerium sulfate was 1.6 mmol l⁻¹ in sulfuric acid, the chemiluminescent intensity was found to be highest by using 0.3 mol l⁻¹ sulfuric acid as a carrier solution. The particular chemiluminescent system could tolerate such distinct acidic environments that it was utilized for detecting many compounds that are stable in acidic solutions. Furthermore, by virtue of IR, UV-Vis and luminescence spectroscopic measurements, the chemiluminescent behavior of rhodamine B was studied and a possible mechanism for this chemiluminescent reaction was proposed. The emitter was affirmed to be a radical species due to one of the oxidation products of RhB; the chemiluminescent emissive wavelength was about 425 nm.     

Fluorescence-based nitric oxide detection by ruthenium porphyrin fluorophore complexes

The ruthenium(II) porphyrin fluorophore complexes [Ru(TPP)(CO)(Ds-R)] (TPP = tetraphenylporphinato dianion; Ds = dansyl; R = imidazole (im), 1, or thiomorpholine (tm), 2) were synthesized and investigated for their ability to detect nitric oxide (NO) based on fluorescence. The X-ray crystal structures of 1 and 2 were determined. The Ds-im or Ds-tm ligand coordinates to an axial site of the ruthenium(II) center through a nitrogen or sulfur atom, respectively. Both exhibit quenched fluorescence when excited at 368 or 345 nm. Displacement of the metal-coordinated fluorophore by NO restores fluorescence within minutes. These observations demonstrate fluorescence-based NO detection using ruthenium porphyrin fluorophore conjugates.     

Synthesis of fluorescent probes based on stilbenes and diphenylacetylenes targeting β-amyloid plaques

Three fluorescent probes were synthesized aiming for optical imaging to detect amyloid plaques present in the patients with Alzheimer’s disease (AD). These compounds were prepared via Sonogashira coupling of a well-defined fluorophore (4-bora-3a,4a-diaza-s-indacene, BODIPY) with the pharmacophore possessing either a stilbene or a diphenylacetylene moiety. Different polyethylene glycol chain lengths were used as linkers between the fluorophore and the pharmacophore to adjust the lipophilicity of these probes. These compounds exhibit strong fluorescence emission between 665 and 680 nm and have very high extinction coefficients comparable to the parent fluorophore, BODIPY dye.     

Chemiluminescent flow-through sensor for 1,10-phenanthroline based on the combination of molecular imprinting and chemiluminescence.

A functional polymer for the catalysis of the chemiluminescent reaction and molecular recognition ability of 1,10-phenanthroline was prepared based on the molecular imprinting method. The structural and catalytic roles of transition metal ion interactions were applied in the material design. A ternary complex, 4-vinylpyridine-Cu(II)-1,10-phenanthroline (2:1:1), was synthesized and used as a functional monomer. The ligand 1,10-phenanthroline in the ternary complex was the template used to form the molecularly imprinted polymer. Another monomer, styrene, and the cross-linking reagent divinylbenzene were copolymerized with the ternary complex. The polymer containing the ternary complex is an efficient catalyst for the decomposition of hydrogen peroxide. During the hydrogen peroxide decomposition, superoxide radical ion is formed, which reacts with 1,10-phenanthroline and gives a chemiluminescent emission. The 1,10-phenanthroline was destroyed during the chemiluminescent reaction, leaving a cavity and copper binding sites for another 1,10-phenanthroline molecule. The prepared polymer particles were packed into a glass tube and developed as a molecular recognition chemiluminescent flow-through sensor for 1,10-phenanthroline. The sensitivity and selectivity of the sensor were tested.     

Chemiluminescence from the oxidation of urea and ammonia with hypobromite and N-bromosuccinimide

The spectral distribution for the chemiluminescent oxidation of ammonia with hypobromite is significantly different to that for the oxidation of ammonia with N-bromosuccinimide. Therefore, in contrast to the assumptions of several authors, the action of N-bromosuccinimide is not solely derived from the in situ formation of hypobromite. Neither the oxidation of urea with hypobromite nor the oxidation of urea with N-bromosuccinimide involves an initial hydrolysis of urea to ammonia in the alkaline solution. However, these two reactions lead to a common emitter. The addition of xanthene dyes, such as dichlorofluorescein, enhance the chemiluminescence intensity by energy transfer to the efficient fluorophore, but reaction between the sensitiser and hypobromite can result in a significant increase in the background signal. A list of potential interferences has been compiled; particular attention was paid to guanidino compounds, as the chemiluminescence accompanying the oxidation of this functional group has not been previously discussed.     

人血清中cTnI的化学发光酶免疫分析研究——实验条件的优化

采用高效化学发光试剂3-(2'-螺旋金刚烷)-4-甲氧基-4-(3"-羟基)苯-1,2-二氧杂环丁烷磷酸(AMPPD)作为检测底物, 并将传统的ELISA两步双抗夹心法改为一步法, 得到了高灵敏测定人血清中心肌肌钙蛋白I(cTnI)的化学发光酶免疫分析优化条件. 采用单因素变化法和方阵滴定法得到的最佳实验条件为: 捕获抗体包被浓度为10.0 μg/mL, 以pH=7.0的PBS作为免疫反应缓冲底液, 以含质量分数为1.0%的BSA pH=9.6的碳酸盐溶液缓冲液, 于4 ℃封闭过夜, 生物素-检测抗体(Biotin-IgG2)以及碱性磷酸酶-亲和素(ALP-Avidin)结合物均采用1:2000稀释度, 免疫反应条件为37 ℃, 孵育时间60 min, 以去离子水作为洗涤剂, 以1:100稀释的AMPPD作为发光反应底物, 发光反应时间10 min(37 ℃). 检出限为0.02 ng/mL, 比现行ELISA法灵敏度提高一个数量级; 测定周期约75 min, 比两步法ELISA快得多; 线性范围(0.04~36.20 ng/mL)比ELISA法扩宽了两个数量级; 加标回收率97.5%~102.8%, 对标准样品的测定结果与用ELISA法的测定结果吻合; 重复性好, 3个样品批内变异系数均小于8.5%(n=12).     

Development of a sensitive, rapid, biotin-streptavidin based chemiluminescent enzyme immunoassay for human thyroid stimulating hormone

A highly sensitive "two-site" chemiluminescent immunoassay specific for human thyroid stimulating hormone (TSH) was developed. The signal amplification was achieved via a biotin-streptavidin system (BSAS). The HRP-luminol-H(2)O(2) chemiluminescent system with high sensitivity was chosen as the detection system. Biotinylated anti-TSH monoclonal antibody (MAb) and HRP-labeled streptavidin were first synthesized. Then the signal amplification was achieved through the interaction between the biotinylated anti-TSH MAb and the HRP-streptavidin conjugate. The light intensity developed was in proportion to the TSH present in the samples. The assay showed little cross-reactivity with three other glycoprotein hormones (human chorionic gonadotropin (HCG), luteinizing hormone (LH), follicle stimulating hormone (FSH)) due to the high specificity of the antibody. The working range for human thyroid stimulating hormone was 0.1-40 mU L(-1). Both the intra-assay and inter-assay coefficients of variation were less than 10% for the BSAS based chemiluminescent enzyme immunoassay (CLEIA). The proposed assay had a sensitivity of 0.01 mU L(-1) which was 10-fold higher than the HRP-MAb conjugate based TSH immunoassay. Thus the higher sensitivity facilitated the clinical testing for thyroid states. The effects of several reaction parameters, such as incubation time, temperature, and reaction volume of the method, were also studied. This method has been successfully applied to the evaluation of TSH in human serum. Compared with the commercial enzyme chemiluminescent immunoassay, the correlation was satisfied.     

A red emissive donor-acceptor fluorophore as protein sensor: Synthesis,characterization and binding study

The rational design of environmentally sensitive small molecule fluorophores with superior photophysical properties is critical for fluorimetry based biosensing. Herein, we have developed a new donor-acceptor fluorophore for quantitative detection of Human Serum Albumin (HSA) in aqueous samples. The fluorophore was easily prepared by Knoevenagel condensation, and showed excellent photophysical properties and positive solvatochromism. The design of the fluorophore was based on a nitrogen donor—π-conjugation—nitrile acceptors (D—π—A) to preserve efficient intramolecular charge transfer and long-wavelength emission. The fluorophore showed remarkable “turn-on” fluorescence in presence of HSA, which led to quantitative determination of the protein in aqueous buffer samples. Structure and electronic properties of the fluorophore played important roles on the superior HSA sensing ability. The findings indicate that minor changes in design strategy can be advantageous while developing long-wavelength (far red or near infrared) emitting fluorophores for biosensing and bioimaging.