Synthesis and characterization of surface-aminated polypyrrole–silica nanocomposites

 Two synthetic routes to surface-aminated polypyrrole–silica nanocomposite particles have been investigated. Route 1 involved the initial synthesis of homopolypyrrole – silica particles as described previously, followed by surface amination using 3-aminopropyltriethoxy-silane. In Route 2 aminated polypyrrole–silica particles were synthesized directly by copolymerising an N-substituted aminopyrrole comonomer with pyrrole in the presence of an ultrafine silica sol. Both types of aminated particles were characterized in terms of their particle size and morphology, long-term colloid stability and degree of amination using transmission electron microscopy, disc centrifuge photosedimentometry and zeta potential measurements, respectively. Received: 19 May 1998 Accepted: 15 June 1998     

Synthesis and characterization of poly（methyl methacrylate-co-polyhedral oligomeric silsesquioxane） hybrid nanocomposites

A novel poly(methyl methacrylate-co-polyhedral oligomeric silsesquioxane) hybrid nanocomposite was synthesized by free radical polymerization and characterized by ~1H NMR,~(29)Si NMR,and TGA technologies.Compared with PMMA homopolymer, the nanocomposite has better thermal stability.     

Synthesis and characterization of functionalized carbon black/poly(vinyl alcohol) high refractive index nanocomposites

Carbon black(CB)/polymer composites with high refractive index(RI) were fabricated from poly(vinyl alcohol) (PVA) and covalently functionalized nano-CB(PVA-es-CB) by simple esterification reaction.Transmission electron microscopy showed that uniform aggregates of PVA-es-CB nanoparticles with a size smaller than 100 nm formed in the nanocomposite films.EUipsometric measurements indicated that the PVA-es-CB/PVA composite films had a RI in the range 1.520-1.598 linearly increased with the PVA-es-CB volume content.Theoretical equation based on Lorentz-Lorenz theory provided reasonably close estimation of the refractive indices to the experimentally observed values.The hybrid films also revealed relatively good surface planarity,thermal stability and optical transparency.     

In situ polymerized poly(butylene succinate)/silica nanocomposites: Physical properties and biodegradation

A series of poly(butylene succinate)/silica (PBS/silica) nanocomposites were prepared by in situ polymerization. Solid-state ²⁹Si NMR and FTIR analysis indicated that silanol-bonded carbonyl groups are established within PBS/silica nanocomposite materials. Rheological effects inherent to the silica filler were evaluated by melt rheological analysis as a function of shear force in the molten state. Despite high shear force, PBS/silica nanocomposites maintained a relatively high melt viscosity, attributable to a network structure resulting from covalent bonding between silica and the polymer chain. Nanocomposite material containing 3.5 wt% silica exhibited greatly improved mechanical properties. The tensile strength at break and elongation were ca. 38.6 MPa and 515%, while those of the parent PBS were 26.3 MPa and 96%, respectively. PBS/silica nanocomposites showed composition dependency on biodegradation ascribable to reduced crystallinity and preferential microbial attack.     

CoAPO-11分子筛的合成、表征和催化性能： 1-己烯异构化反应

水热法合成了钴取代磷铝酸盐分子筛CoAPO-11，并采用了X射线衍射、扫描电子显微镜、红外光谱、紫外可见光谱以及氮气吸脱附等表征手段对合成的样品进行表征，并在合成的分子筛上进行1-己烯异构化反应评价，并考查了温度和空速对反应的影响。结果表明，在反应温度300℃及空速为2.4h－1CoAPO-11分子筛对1-己烯异构化反应具有较好的催化性能。     

Structure and mechanical properties of poly(l-lactide)/layered silicate nanocomposites

Poly(ε-caprolactone) (PCL) masterbatches with the intercalated and the exfoliated morphology were prepared by ring opening polymerization of ε-caprolactone in the presence of organomodified montmorillonite (MMT) Cloisite 30B. Poly(l-lactide) (PLLA) nanocomposites with Cloisite 30B or PCL masterbatches were prepared by melt blending. The effects of the silicate type, MMT content and the nanocomposite morphology on thermal and mechanical properties of PLLA nanocomposites were examined. The montmorillonite particles in PLLA/Cloisite 30B and PLLA/intercalated masterbatch nanocomposites were intercalated. In contrary to expectations, the exfoliated silicate layers of exfoliated masterbatch were not transferred into the PLLA matrix. Due to a low miscibility of PCL and PLLA, MMT remained in the phase-separated masterbatch domains. The stress-strain characteristics of PLLA nanocomposites, Young modulus E, yield stress σ_y and yield strain ε_y, decreased with increasing MMT concentration, which is associated with the increase in PCL content. The expected stiffening effect of MMT was low due to a low aspect ratio of its particles and was obscured by both plastifying effects of PCL and low PLLA crystallinity. Interestingly, in contrast to the neat PLLA, ductility was enhanced in all PLLA/Cloisite 30B materials and in PLLA/masterbatch nanocomposites with low MMT concentrations.     

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Five new block copoly(imide siloxane)s have been prepared by reacting two different diamines, 4,4″-bis(p-aminophenoxy)-3,3″-trifluoromethyl terphenyl (APTTFT) and amino-propyl terminated polydimethylsiloxane (APPS), separately with 4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride); BPADA. The reactions were conducted by a two pot solution imidization technique. The diamine APTTFT and the dianhydride BPADA composed the hard block segment while APPS and BPADA composed the soft block segment. The soft and hard blocks of different block lengths were generated by different stoichiometric imbalance in two different flasks and the final polymers were obtained by reacting both the blocks together. Different block copoly(imide siloxane)s were prepared on increasing the hard block lengths (DP) from 7 to 12, 18, 23 and 28 and the soft block lengths (DP) from 4 to 6, 8, 10 and 12, respectively. The resulting polymers have been well characterized by NMR, DSC and DMA techniques. The properties of the block copolymers were compared with the analogous random copolymers and homopolyimide prepared without APPS.     

Biodegradable poly(lactic acid)/chitosan-modified montmorillonite nanocomposites: Preparation and characterization

In this study, the biodegradable poly(lactic acid) (PLA)/montmorillonite (MMT) nanocomposites were successfully prepared by the solution mixing process of PLA polymer with organically-modified montmorillonite (m-MMT), which was first treated by n-hexadecyl trimethyl-ammonium bromide (CTAB) cations and then modified by biocompatible/biodegradable chitosan to improve the chemical similarity between the PLA and m-MMT. Both X-ray diffraction data and transmission electron microscopy images of PLA/m-MMT nanocomposites indicate that most of the swellable silicate layers were disorderedly intercalated into the PLA matrix. Mechanical properties and thermal stability of the PLA/m-MMT nanocomposites performed by dynamic mechanical analysis and thermogravimetric analysis have significant improvements in the storage modulus and 50% loss in temperature when compared to that of neat PLA matrix. The degradation rates of PLA/m-MMT nanocomposites are also discussed in this study.     

Organically modified rectorite toughened poly(lactic acid): Nanostructures, crystallization and mechanical properties

To improve the toughness of PLA, poly(lactic acid) (PLA)/organically modified rectorite (OREC) nanocomposites were prepared via the melt-extrusion method. A partially exfoliated and partially intercalated structure was confirmed by WAXD and TEM. The crystallization behaviors of neat PLA and nanocomposite were studied by POM and DSC, and it was found that OREC had a great effect on the overall crystallization rate and spherulitic texture of PLA. The presence of OREC could toughen PLA greatly. For example, when 1 wt.% OREC was added, the elongation at break of the nanocomposite was increased to 210%. The toughening mechanism was analyzed through the observation of the inner structure of the tensile test bar using SEM.     

Morphology and properties of waterborne polyurethane/clay nanocomposites

Aqueous emulsion of polyurethane ionomers, based on poly(tetramethylene glycol) or poly(butylene adipate) as soft segment, isophorone diisocyanate as diisocyanate, 1,4-butandiol as chain extender, dimethyl propionic acid as potential ionic center, triethylene tetramine as crosslinker, and triethyl amine as neutralizer, were reinforced with organoclay to give nanocomposites. The particle size of emulsion was measured and the morphology of these nanocomposites was observed by transmission electron microscope, where the effectively intercalated or exfoliated organoclay was observed. The reinforcing effects of organoclay in mechanical properties of these nanocomposites were examined by dynamic mechanical and tensile tests, and the Shore A hardness was measured. Enhanced thermal and water resistance and marginal reduction in transparency of these nanocomposites were observed compared with pristine polymer.     

Homolytic addition of benzylidene bromide to trimethylvinylsilane and 1-hexene

Benzylidene bromide reacts with unsaturated compounds CH₂=CHR (R = Bu, SiMe₃) in the presence of benzoyl peroxide to give PhCHBrCH₂CHRBr adducts.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1337–1338, July, 1994.     

Studies of Intermolecular Heterogeneity Distribution in Ethylene/1-hexene Copolymers Using DSC Method

The investigation of the intermolecular composition distribution of an ethylene/1-hexene copolymers using DSC method has been carried out. The known methods: step crystallization (SC) and successive self-nucleation/annealing (SSA) have been adapted for this purpose, and particularly, the optimal condition of the process have been chosen to enable the best fractional crystallization of the copolymer. The method has been applied for fractionation of two ethylene/1-hexenecopolymers synthesized with supported vanadium and zirconocene catalysts and having similar concentrations of 1-hexene. Although metallocene catalysts are known from their more homogeneous structure of active sites in comparison to multi-site Ziegler–Natta catalysts, the copolymers obtained over both catalytic systems gave DSC curves resolved into several peaks but with different melting points. Using the Thomson–Gibbs equation, comparable average lamellar thickness of the separated peaks has been calculated. The amounts of copolymer fraction with defined lamellar thickness have been determined. It was obtained that the copolymer produced from the metallocene system contains a thinner and more homogeneous lamella thickness than that obtained with Ziegler–Natta vanadium catalyst supported on the same carrier. This revised version was published online in August 2006 with corrections to the Cover Date.     

Accelerated ageing and degradation in poly-l-lactide/hydroxyapatite nanocomposites

Dry, compression molded films of medical grade poly-l-lactide (PLLA) showed a marked reduction in tensile strength and strain after accelerated ageing in aqueous NaOH at 50 °C, accompanied by mass loss, surface erosion, increased hydrophilicity and, in the case of the initially amorphous films, cold crystallization owing to the plasticizing effect of the ageing medium. Addition of well dispersed nanosized hydroxyapatite (nHA) particles resulted in increases in the rate of mass loss during ageing, identified with accelerated degradation at the matrix/particle interfaces. However, the associated decreases in tensile strength and strain to fail with ageing time were far less marked in the presence of the nHA than in the unmodified films. This implied that nHA acts as an effective toughener of the bulk material, consistent with TEM observations of the deformed films, which indicated failure of the particle-matrix interfaces to promote plastic deformation of the PLLA.     

Hydroxycarbonylation of 1-hexene catalyzed by [Rh(COD)(amine)2](PF6) complexes immobilized on poly(4-vinylpyridine)

Summary Rhodium(I) complexes, [Rh(COD)(amine)₂](PF₆) (COD = 1,5-cyclooctadiene, amine = 4-picoline, 3-picoline, 2-picoline, pyridine, 3,5-lutidine or 2,6-lutidine) immobilized on poly(4-vinylpyridine) in contact with water catalyzed both the hydroxycarbonylation of 1-hexene to propionic acid and the water-gas shift reaction (WGSR). The role of the coordinated amine on the catalytic activity was examined.     

铱基催化1-已烯氢甲酰化反应的研究

自1938年Otto Roelen从事Fisher-Ttopsch发现氢甲酰化反应以来,这类反应一直是有机合成和金属催化领域热点之一。目前合成醛及其衍生物的氢甲酰化反应已成为金属均相催化体系中使用可溶性催化剂最大的工业应用范例。而自20世纪90年代出现的Cativa(铱基催化剂),因具有原料价格低,稳定性好,易溶解,     

茂－茚锆金属络合物催化乙烯/1－己烯共聚和丙稀均聚研究

Complexes （R^1Cp）（R^2Ind）ZrCl2, the catalysts previously reported active for ethylene polymerization showed high activity in ethylene/1-hexene copolymerization and propylene polymerization in the presence of MAO. The content of 1-hexene in copolymers ranged from 1.2% to 3.2%. In propylene polymerization the complex 1 showed the highest activity, up to 1.2×10^6 g of polypropylene per mol of catalyst per hour. Based on the analysis of NMR spectral data, the relationships between complex structures and polymerization results were explored.     

Synthesis and characterization of poly(vinylpyrrolidone-co-vinylphosphonic acid) copolymers

Radical copolymerizations of 1-vinyl-2-pyrrolidone (VP) with vinylphosphonic acid (VPA) at different feed ratios were investigated. The copolymers were characterized by ¹H-NMR, ¹³C-NMR and FT-IR. The copolymer composition was determined from the elemental analysis. Thermogravimetric analysis (TG) illustrates that the copolymers are stable up to 200 °C. Temperature dependence of the alternating current (AC) conductivities were investigated by means of impedance spectroscopy. The direct current (DC) conductivities of the samples are derived from the AC conductivity data.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

Catalytic oxidation of 1-hexene with molecular oxygen by iridium nitro complexes

The oxidation of 1-hexene by molecular oxygen catalyzed by iridium(III) complexes, [Ir(CH₃CN)_5−xCl_x(NO₂)]^2−x (x=0, 1, or 2) has been studied in acetonitrile under P(O₂)=1.5 atm and T=100°C. [Ir(CH₃CN)₅(NO₂)](PF₆)₂ oxidizes 1-hexene to 1,2-epoxyhexane. Complex [Ir(CH₃CN)₄Cl(NO₂)]PF₆ oxidizes 1-hexene to 2,3-epoxyhexane only in the presence of [Pd(PhCN)₂(Cl)₂] (an olefin activator). In contrast to the cationic complexes, the neutral complex [Ir(CH₃CN)₄Cl₂(NO₂)] oxidizes 1-hexene to 2-hexanone only in the presence of [Pd(PhCN)₂(Cl)₂].     

Ethylene/1-hexene copolymerizations by syndioselective metallocenes: Direct comparison of Me2C(Cp)(Flu)ZrMe2 with Et(Cp)(Flu)ZrMe2

Copolymerizations of ethylene with 1-hexene have been carried out by using two metallocenes: highly syndiospecific isopropylidene(1-η⁵-cyclopentadienyl)(1-η⁵-fluorenyl)-dimethylzirconium (Me₂C(Flu)(Cp)ZrMe₂, 1) and less syndiospecific (1-fluorenyl-2-cyclopentadienylethane)-dimethylzirconium (Et(Flu)(Cp)ZrMe₂, 2), in the presence of [Ph₃C][B(C₆F₅)₄] as a cocatalyst. The effect of different types of bridges on the catalytic activity and comonomer reactivity was reported. The ethano bridged 2 compound of a smaller dihedral angle showed much higher activity than the 1 compound in the ethylene homo- and copolymerizations. The catalytic activities of the two compounds were enhanced about twice when a suitable amount of 1-hexene comonomer is present in the feed. The copolymerization of ethylene with 1-hexene revealed a noticeable influence of the type of bridge on the relative reactivity of the 1-hexene. ¹³C-NMR analysis of copolymers showed that compound 1 is characterized by lower r_E, taken as an index of ethylene reactivity, and higher reactivity of 1-hexene. The bridge also affects the distribution of the 1-hexene along the copolymer chain, investigated through their product of reactivity ratios, r_Er_H. The thermal properties and the density of copolymers were not affected by the type of bridge of the metallocenes, but mainly depended on 1-hexene content in the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2763–2772, 1999