Low-temperature one-step solid-phase synthesis of carbon-encapsulated TiO<Subscript>2</Subscript> nanocrystals as anode materials for lithium-ion batteries

A simple and highly efficient method is developed for in situ one-step preparation of carbon co-encapsulated anatase and rutile TiO₂ nanocrystals (TiO₂@C) with core-shell structure for lithium-ion battery anode. The synthesis is depending on the solid-phase reaction of titanocene dichloride with ammonium persulfate in an autoclave at 200 °C for 30 min. The other three titanocene complexes including bis(cyclopentadienyl)dicarbonyl titanium, cyclopentadienyltitanium trichloride, and cyclopentadienyl(cycloheptatrienyl)titanium are used instead to comprehensively investigate the formation mechanism and to improve the microstructure of the product. The huge heat generated during the explosive reaction cleaves the cyclopentadiene ligands into small carbon fragments, which form carbon shell after oxidative dehydrogenation coating on the TiO₂ nanocrystals, resulting in the formation of core-shell structure. The TiO₂ nanocrystals prepared by titanocene dichloride have an equiaxed morphology with a small diameter of 10–55 nm and the median size is 30.3 nm. Hundreds of TiO₂ nanocrystals are encapsulated together by the worm-like carbon shell, which is amorphous and about 20–30 nm in thickness. The content of TiO₂ nanocrystals in the nanocomposite is about 31.1 wt.%. This TiO₂@C anode shows stable cyclability and retains a good reversible capacity of 400 mAh g^?1 after 100 cycles at a current density of about 100 mA g^?1, owing to the enhanced conductivity and protection of carbon shell.     

Effect of ambient pressure on the crystalline phase of nano TiO2 particles synthesized by a dc thermal plasma reactor

The synthesis of nanoparticles of titanium dioxide (TiO₂) with varying percentages of anatase and rutile phases is reported. This was achieved by controlling the operating pressure in a transferred-arc, direct current thermal plasma reactor in which titanium vapors are evaporated, and then exposed to ambient oxygen. The average particle size remained around 15 nm in each case. The crystalline structure of the as-synthesized nanoparticles of TiO₂ was studied with X-ray diffraction analysis; whereas the particle morphology was investigated with the help of transmission electron microscopy. The precursor species responsible for the growth of these nanoparticles was studied with the help of optical emission spectroscopy. As inferred from the X-ray diffraction analysis, the relative abundance of anatase TiO₂ was found to be dominant when synthesized at 760 Torr, and the same showed a decreasing trend with decreasing chamber pressure. The study also reveals that anatase TiO₂ is a more effective photocatalytic agent in degrading methylene blue by comparison to its rutile phase.     

Synthesis of efficient TiO2-based photocatalysts by phosphate surface modification and the activity-enhanced mechanisms

A simple strategy to greatly increase the thermal stability of nanocrystalline anatase has been put forward to fabricate efficient TiO₂-based photocatalysts under ultraviolet irradiation, via the surface modification with phosphate anions. The results show that the increased anatase thermal stability is attributed to the roles of the phosphate modification effectively inhibiting the contacts among anatase nanocrystals. Compared to un-modified TiO₂, the modified TiO₂ calcined at high temperature (over 700 °C) exhibits much high photocatalytic activity for degrading Rhodamine B (or phenol) solution, even superior to the commercial P25 TiO₂. The activity enhancement is mainly attributed to the increased separation rate of photogenerated charge carriers on the basis of the measurements of steady state- and transient state-surface photovoltage spectroscopy. This work would provide a practical route to reasonably design and synthesize high-performance TiO₂-based nanostructured photocatalysts with high anatase thermal stability.     

Photoluminescence from TiO2/PMMA Nanocomposite Prepared by γ Radiation

The surface of anatase TiO₂ nanocrystals with an average size of ~20 nm was modified by PMMA through γ radiation. The modified nanocrystals were investigated with photoluminescence (PL) and Fourier transform infrared (FTIR) spectra. A stable blue luminescence peak (~420 nm) can be observed for the modified anatase TiO₂ nanocrystal.     

Aerosol characterization and lung deposition of synthesized TiO2 nanoparticles for murine inhalation studies

This study presents a novel exposure protocol for synthesized nanoparticles (NPs). NPs were synthesized in gas phase by thermal decomposition of metal alkoxide vapors in a laminar flow reactor. The exposure protocol was used to estimate the deposition fraction of titanium dioxide (TiO₂) NPs to mice lung. The experiments were conducted at aerosol mass concentrations of 0.8, 7.2, 10.0, and 28.5 mg m^?3. The means of aerosol geometric mobility diameter and aerodynamic diameter were 80 and 124 nm, and the geometric standard deviations were 1.8 and 1.7, respectively. The effective density of the particles was approximately from 1.5 to 1.7 g cm^?3. Particle concentration varied from 4 × 10⁵ cm^?3 at mass concentrations of 0.8 mg m^?3 to 12 × 10⁶ cm^?3 at 28.5 mg m^?3. Particle phase structures were 74% of anatase and 26% of brookite with respective crystallite sized of 41 and 6 nm. The brookite crystallites were approximately 100 times the size of the anatase crystallites. The TiO₂ particles were porous and highly agglomerated, with a mean primary particle size of 21 nm. The specific surface area of TiO₂ powder was 61 m² g^?1. We defined mice respiratory minute volume (RMV) value during exposure to TiO₂ aerosol. Both TiO₂ particulate matter and gaseous by-products affected respiratory parameters. The RMV values were used to quantify the deposition fraction of TiO₂ matter by using two different methods. According to individual samples, the deposition fraction was 8% on an average, and when defined from aerosol mass concentration series, it was 7%. These results show that the exposure protocol can be used to study toxicological effects of synthesized NPs.     

Femtosecond Diffuse-Reflectance Spectroscopy of Various Commercially Available TiO2 Powders

The transient absorption properties of several commercially available TiO₂ photocatalysts were investigated by femtosecond diffuse-reflectance spectroscopy. Using femtosecond diffuse-reflectance spectroscopy, the quantities and rates of the initial trapping processes of holes and electrons generated by the photoexcitation of TiO₂ photocatalysts were investigated. It was found that the total amounts of trapped electrons for the pure-anatase and pure-rutile TiO₂ became smaller with increasing particle size, but increased again when the particles’ diameters were larger than 50 nm. The anatase–rutile mixed TiO₂ photocatalysts were found to have smaller amounts of trapped electrons compared with pure-anatase and pure-rutile TiO₂ photocatalysts. The lifetimes of trapped holes of various TiO₂ photocatalysts were also investigated, and it was found that the lifetimes were proportional to the anatase–rutile mixed ratios.     

Preparation of TiO2–MWCNT core/shell heterostructures containing a single MWCNT and their electromagnetic properties

TiO₂–MWCNT core/shell heterostructures containing a single MWCNT have been successfully prepared via solvothermal method. TiO₂–MWCNT heterostructures with different morphologies and electromagnetic (EM) properties have obtained by adjusting the weight ratio of titanium dioxide (TiO₂₎ and multi-walled carbon nanotubes (MWCNT) (weight ratio: 1:1, 5:1 and 10:1). EDS spectrum and X-ray diffraction analysis reveal that the product is composed of Ti, O, and C elements, and the crystal structure of TiO₂ is tetragonal anatase phase. SEM and TEM images show that the MWCNTs are coated by a thin layer of TiO₂ crystals, and the average diameters of the needle-like TiO₂ nanocrystals are less than 100 nm. EM properties of the as-prepared TiO₂–MWCNT heterostructures are investigated in the 0.5–18.0 GHz range. The permittivity and permeability of the TiO₂–MWCNT heterostructures change obviously as the weight ratio of TiO₂ and MWCNT increases. Moreover, the typical resonance–antiresonance phenomenon can be observed in the permittivity and permeability curves.     

Anatase TiO<Subscript>2</Subscript> nanoparticles for lithium-ion batteries

Anatase TiO₂ nanoparticles were prepared by a simple sol-gel method at moderate temperature. X-ray powder diffraction (XRD) and Raman spectroscopy revealed the exclusive presence of anatase TiO₂ without impurities such as rutile or brookite TiO₂. Thermogravimetric analysis confirmed the formation of TiO₂ at about 400 °C. Particle size of about 20 nm observed by transmission electron microscopy matches well with the dimension of crystallites calculated from XRD. The electrochemical tests of the sol-gel-prepared anatase TiO₂ show promising results as electrode for lithium-ion batteries with a stable specific capacity of 174 mAh g^?1 after 30 cycles at C/10 rate. The results show that improvement of the electrochemical properties of TiO₂ to reach the performance required for use as an electrode for lithium-ion batteries requires not only nanosized porous particles but also a morphology that prevents the self-aggregation of the particles during cycling.     

Photoluminescence in anatase titanium dioxide nanocrystals

Titanium dioxide (TiO₂) nanocrystals were prepared by a hydrolysis process of tetrabutyl titanate. X-ray diffraction and Raman scattering showed that the as-prepared TiO₂ nanocrystals have anatase structure of TiO₂, and that the monophase anatase nanocrystals can be achieved through a series of annealing treatments below 650 °C. We measured photoluminescence (PL) spectra of the TiO₂ nanocrystals. Under 2.41–2.71 eV laser irradiation, the TiO₂ nanocrystals displayed strong visible light emission with maxima of 2.15–2.29 eV even at excitation power as low as 0.06 W/cm². To identify the PL mechanism in the TiO₂ nanocrystals, the dependences of the PL intensity on excitation power and irradiation time were investigated. The experimental results indicated that the radiative recombination is mediated by localized levels related to surface defects residing in TiO₂ nanocrystallites. Received: 7 April 1999 / Revised version: 23 August 1999 / Published online: 30 November 1999     

Preparation and characterization of hollow TiO2 nanospheres: The effect of Fe3+ doping on their microstructure and electronic structure

Hollow Fe-doped TiO₂ spheres with various Fe dopant concentrations, 0.25, 0.50 and 1.0 wt%, were synthesized via a hydrothermal method using carbon spheres as templates. The prepared samples were calcined in air at temperatures of 500 and 550 °C for 3 h and characterized using XRD, SEM, TEM, SAED, EDX, XPS and UV–vis spectroscopy. The analytical results showed that the presence of a very low concentration of Fe³⁺ incorporated into hollow nanoporous TiO₂ spheres inhibited the growth of nanocrystals as well as the anatase to rutile phase transformation inside the anatase TiO₂ lattice. Doping with 1.0 wt% Fe³⁺ resulted in a reduction of the TiO₂ sphere diameter from 205.71 ± 25.29 nm to 68.70 ± 7.07 nm. The optical energy gap of the samples was determined from UV–Vis absorption spectra. The results showed that the absorption edge of TiO₂@Fe was shifted toward the visible light region with increased Fe content.     

Immobilized TiO<Subscript>2</Subscript> nanoparticles produced by flame spray for photocatalytic water remediation

Anatase/rutile mixed-phase titanium dioxide (TiO₂) photocatalysts in the form of nanostructured powders with different primary particle size, specific surface area, and rutile content were produced from the gas-phase by flame spray pyrolysis (FSP) starting from an organic solution containing titanium (IV) isopropoxide as Ti precursor. Flame spray-produced TiO₂ powders were characterized by means of X-ray diffraction, Raman spectroscopy, and BET measurements. As-prepared powders were mainly composed of anatase crystallites with size ranging from 7 to 15 nm according to the synthesis conditions. TiO₂ powders were embedded in a multilayered fluoropolymeric matrix to immobilize the nanoparticles into freestanding photocatalytic membranes. The photocatalytic activity of the TiO₂-embedded membranes toward the abatement of hydrosoluble organic pollutants was evaluated employing the photodegradation of rhodamine B in aqueous solution as test reaction. The photoabatement rate of best performing membranes significantly overcomes that of membranes produced by the same method and incorporating commercial P25-TiO₂.     

Generation and characterization of stable, highly concentrated titanium dioxide nanoparticle aerosols for rodent inhalation studies

The intensive use of nano-sized titanium dioxide (TiO₂) particles in many different applications necessitates studies on their risk assessment as there are still open questions on their safe handling and utilization. For reliable risk assessment, the interaction of TiO₂ nanoparticles (NP) with biological systems ideally needs to be investigated using physico-chemically uniform and well-characterized NP. In this article, we describe the reproducible production of TiO₂ NP aerosols using spark ignition technology. Because currently no data are available on inhaled NP in the 10?C50 nm diameter range, the emphasis was to generate NP as small as 20 nm for inhalation studies in rodents. For anticipated in vivo dosimetry analyses, TiO₂ NP were radiolabeled with ⁴⁸V by proton irradiation of the titanium electrodes of the spark generator. The dissolution rate of the ⁴⁸V label was about 1% within the first day. The highly concentrated, polydisperse TiO₂ NP aerosol (3?C6 × 10⁶ cm^?3) proved to be constant over several hours in terms of its count median mobility diameter, its geometric standard deviation, and number concentration. Extensive characterization of NP chemical composition, physical structure, morphology, and specific surface area was performed. The originally generated amorphous TiO₂ NP were converted into crystalline anatase TiO₂ NP by thermal annealing at 950 °C. Both crystalline and amorphous 20-nm TiO₂ NP were chain agglomerated/aggregated, consisting of primary particles in the range of 5 nm. Disintegration of the deposited TiO₂ NP in lung tissue was not detectable within 24 h.     

Template growth of vertically aligned carbon nanotubes using self-assembled monolayers of SiO2 particles by Langmuir–Blodgett technique

The thermal stability of nanocrystalline 3R-CuCrO₂ obtaining by hydrothermal method was investigated by annealing treatment, XRD, FT-IR, XPS and TG. The three temperature domains corresponding to thermal stability of 3R-CuCrO₂ nanocrystals (25–400 °C), destabilization of nanocrystalline 3R-CuCrO₂ phase (400–800 °C) and recrystallization of 3R-CuCrO₂ in microcrystalline state over 800 °C, were determined by the specific hydrothermal synthesis conditions. This study has indicated that nanocrystals with delafossite structure synthesized by hydrothermal method exhibit nanocrystalline state up to a reasonably high temperature, about 390 °C, which could be interesting for technical applications and the classical theory of the grain growth.     

Photoluminescence and Raman spectroscopy studies of Eu3+-doped rutile TiO2 nanocrystals at high pressures

Nanocrystal samples (particle size about 90 nm) of Eu³⁺-doped rutile titanium dioxide (TiO₂) nanocrystals (rutile Eu³⁺/TiO₂ nanocrystals) were synthesized by the sol–gel method with hydrothermal treatment. The pressure effect on photoluminescence (PL) and Raman spectra of the rutile Eu³⁺/TiO₂ nanocrystals was investigated with a diamond anvil cell under hydrostatic pressure condition. Raman spectra of the samples at high pressures indicated that the critical pressure for the transition from the rutile phase to a new baddeleyite-type phase was between 10 and 14.2 GPa. The position of Raman bands shifted to high wavenumbers and the PL intensity of ⁵D ₀→⁷F ₂ transition of Eu³⁺ decreased down to zero with the increase of pressure before the phase transition occurred. After releasing the pressure, the rutile phase was not recovered and a α-PbO₂-type phase was observed at ambient pressure.     

Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies

Characterizing the state of nanoparticles (such as size, surface charge, and degree of agglomeration) in aqueous suspensions and understanding the parameters that affect this state are imperative for toxicity investigations. In this study, the role of important factors such as solution ionic strength, pH, and particle surface chemistry that control nanoparticle dispersion was examined. The size and zeta potential of four TiO₂ and three quantum dot samples dispersed in different solutions (including one physiological medium) were characterized. For 15 nm TiO₂ dispersions, the increase of ionic strength from 0.001 M to 0.1 M led to a 50-fold increase in the hydrodynamic diameter, and the variation of pH resulted in significant change of particle surface charge and the hydrodynamic size. It was shown that both adsorbing multiply charged ions (e.g., pyrophosphate ions) onto the TiO₂ nanoparticle surface and coating quantum dot nanocrystals with polymers (e.g., polyethylene glycol) suppressed agglomeration and stabilized the dispersions. DLVO theory was used to qualitatively understand nanoparticle dispersion stability. A methodology using different ultrasonication techniques (bath and probe) was developed to distinguish agglomerates from aggregates (strong bonds), and to estimate the extent of particle agglomeration. Probe ultrasonication performed better than bath ultrasonication in dispersing TiO₂ agglomerates when the stabilizing agent sodium pyrophosphate was used. Commercially available Degussa P25 and in-house synthesized TiO₂ nanoparticles were used to demonstrate identification of aggregated and agglomerated samples.     

Synthesis of nanoporous TiO2 materials using a doubly surfactant system and applying them as useful adsorbents

Hydrothermal and non-hydrothermal nanoporous TiO₂ materials were synthesized via a doubly surfactant route by using cationic cetyltrimethylammonium bromide and anionic sodium dodecyl sulfate surfactants as the molecular template/structure directing agent. Hydrothermal treatment was performed for comparison. The bulk chemical and phase compositions, crystalline structures, particle morphologies, thermal stabilities and surface texturing were determined by means of X-ray powder analysis, SEM and N₂ sorptiometry. The nanoporous TiO₂ materials were found to have a spherical morphology with a diameter range of 50–200 nm and a high surface area (390 m² g^?1). Hydrothermal and non-hydrothermal nanoporous TiO₂ materials were applied for adsorption of heavy metal cations and the toxic organic compound, copper phthalocyanine, from water for evaluation of their adsorption properties. Both nanoporous TiO₂ materials were found to have similar adsorption capacities toward heavy metal cations and CuPc. Both hydrothermal and non-hydrothermal TiO₂ nanoporous materials were found to have very good potential for application as a new adsorbent especially for adsorbing heavy metal cations from wastewaters.     

Synthesis of photocatalytic active fibrous titania by the solvothermal reactions

Abstract

Fibrous titania was synthesized by the solvothermal reactions of H₁Ti₄O₉ nH₂in different media. H₂Ti₄O₉·nH₂O transformed in steps to H₂Ti₈O₁₇, monoclinic TiO_z, anatase and rutile. The phase transformation temperature and microstructure of the products changed significantly depending on the heating environment. The critical temperature at which anatase appeared in liquid media was much lower than that in air. The titania fibers consisted of nanocrystals of TiO₂. The crystallite size and crystallinity of titania decreased with decreasing the dielectric constant of the reaction medium. Consequently, the photocatalytic activity of titania changed with heat treatment media in the following sequence: ethanol, methanol > water > air, i.e., fibrous titania possessing excellent photocatalytic activity could be obtained by the solvothermal reactions using alcohol such as methanol and ethanol. Titania powders crystallized by the solvothermal reaction in methanol also possessed excellent thermal stability.     

Room‐Temperature Synthesis of High Surface Area Anatase TiO2 Exhibiting a Complete Lithium Insertion Solid Solution

The synthesis of highly divided anatase TiO₂ nanoparticles displaying 300 m² g^?1 surface area is achieved by following a two‐step synthetic process at room temperature. The particles exhibit a needle‐like morphology composed of self‐assembled 4 nm nanoparticles. The crystallization process from amorphous TiO₂.1.6H₂O to oriented aggregation of anatase TiO₂ proceeds according to a slow solid dehydration process taking place in a large range of pH in deionized water (1 < pH < 12) or alternatively when including a low amount of NH₄F_(aq) in solution. Driven by their high surface area enhancing the chemical/electrochemical reactivity, it is reported in the case of the anatase TiO₂ that a modification in the lithium insertion mechanism is no longer attributable to a two‐phase reaction between the two‐end members Li_εTiO₂ and Li_0.5±αTiO₂ when downsizing the particle size, but instead through a complete solid solution all along the composition range.     

Improved visible light photocatalytic activity of TiO<Subscript>2</Subscript> nano powders with metal ions doping for glazed ceramic tiles

Self-cleaning and anti-bacterial activities of the photo-catalyst titanium dioxide make it a superior compound for use in the ceramics and glass industry. In order to achieve high self-cleaning efficiency for building products, it is important that Titania is present as anatase phase. Moreover, it is desirable that the particle sizes are in Nano-range, so that a large enough surface area is available for enhanced catalytic performance. In the present paper, Cobalt and Nickel co-doped (4%mol Ni and 4%mol Co doped TiO₂) and un-doped TiO₂ Nano powders have been prepared by sol–gel technique. They were calcined at the temperatures in the range of 475–1075 °C. Ni/Co co-doped TiO₂ postponed the anatase to rutile transformation of TiO₂ by about 200–300°C, such that before calcination at 775°C, no rutile was detected for 4 mol% Ni/Co co-doped TiO₂. A systematic decreasing on crystallite size and increasing on specific surface area of Ni/Co co-doped TiO₂ were observed. Photo-catalytic activity of anatase polymorph was measured by the decomposition rate of methylene blue under visible light. The results showed enhanced catalysis under visible light for Ni/Co co-doped TiO₂ as compared to pure TiO₂. The enhanced performance was attributed to surface chemistry change associated with a slight shift in the band gap. Depending on the temperatures ranging from 475 to 1075 °C, band gap energy of Ni and Co doped TiO₂ crystals decreased. For all samples there is a general reduction of the band gap energy from 3.00 to 2.96 eV.     

Structural transformation study of TiO2 nanoparticles annealing at different temperatures and the photodegradation process of eosin-Y

Hydrothermal method was used to prepare TiO₂ nanoparticles with annealing temperature at 500 °C–700 °C. The mixture of anatase-rutile phase was investigated by powerful tool of X-ray diffraction (XRD). The structural parameters of anatase and rutile mixture phaseTiO₂ nanoparticles were calculated from the Rietveld refinement. The transformation rate of rutile was increased linearly with an annealing temperature of 500 °C–700 °C. The spherical morphology of the anatase and rutile mixed phase were obtained by scanning electron microscope and transmission electron microscope. The spherical particle of the anatase and rutile TiO₂ shows with great aggregation with different size and within the range of few tens nm. The EDAX study revealed the presence of titanium and oxygen. The best photocatalytic activity was identified as the 87.04% of anatase and 12.96% of rutile mixer phase of TiO₂. Various factors could be involved for a better photocatalytic activity.