A comparison study of adsorptive transfer voltammetry and solution phase voltammetry for the determination of caffeic acid

This study reports a comparison of adsorptive transfer and solution phase voltammetric methods for the study of caffeic acid. For this purpose, a platform was prepared by the modification of glassy carbon electrodes (GCEs) with MWCNTs and samarium nanoparticles (SmNPs) by means of an ultrasonic bath. The surface morphology of the platform was characterized using SEM, EDX and XRD. The adsorptive transfer voltammetric method was based on the adsorption of caffeic acid (CFA) at the surface of the modified electrode by keeping it into a solution of CFA. Afterwards, the modified electrode was transferred with the adsorbed species in a cell containing only 0.1 mol L⁻¹ phosphate buffer solution (PBS) for the analysis. The current response of CFA was found to be linear over a concentration from 5.0 × 10⁻¹⁰ mol L⁻¹ to 1.0 × 10⁻⁷ mol L⁻¹. The values of the limit of detection (LOD) and limit of quantification (LOQ) were 2.0 × 10⁻¹⁰ mol L⁻¹ and 6.67 × 10⁻¹⁰ mol L⁻¹, respectively. The adsorptive transfer method using the modified electrode (SmNPs/MWCNTs/GCE) has successfully been applied to food samples for determining CFA. The solution phase voltammetry was carried out by dipping the electrode into a voltammetric cell containing CFA. The plot of peak currents was linear over the concentration range of 5.0 × 10⁻⁹ mol L⁻¹ –8.0 × 10⁻⁸ mol L⁻¹. The values of LOD and LOQ were 2.0 × 10⁻⁹ mol L⁻¹ and 6.67 × 10⁻⁹ mol L⁻¹ for CFA using a classical solution phase voltammetry at the proposed platform. It was shown that the LOD obtained at adsorptive transfer voltammetry was 10-fold lower when compared to classical solution phase voltammetry.     

Novel Potentiometric Solid-contact Electrode for the Determination of Fe2+ Ions via MWCNTs-Gemifloxacin Composite

A novel electrode was fabricated for the quantitation of Fe²⁺ ion. It was based on the covalent attachment of the gemifloxacin molecule (the recognition element) to the surface of MWCNTs to be incorporated as an electroactive material. Linear response of Fe²⁺ ions was found in the concentration range of 1×10⁻² mol L⁻¹ to 1×10⁻⁸ mol L⁻¹ with a Nernstian slope of 30.37 ±0.3 (mV/decade) and attained a stable response within 5 s. The sensor exhibited LOD value of 4.8×10⁻⁹ mol L⁻¹. It was applied in the monitoring of Fe²⁺ concentration in multi-vitamins tablets, tap water and milk samples with acceptable recovery ranged from 94.00 % to 102.00 %.     

Flow-Injection Chemiluminescent Determination of Piroxicam Using Tris (2,2′-bipyridyl) Ruthenium(II)—Potassium Permanganate System

Abstract

A rapid and sensitive chemiluminescence method using flow-injection has been developed for the determination of an analgesic agent drug, piroxicam. The method is based on the chemiluminescence reaction of piroxicam with an acidic potassium permanganate and Ru(bipy)₃ ²⁺. The chemiluminescence intensity is greatly enhanced when quinine sulfate is used as a sensitizer. After optimization of the different experimental parameters, a calibration graph was obtained over a concentration range of 3.0 × 0^?8–3.0 × 0^?5 mol L^?1 with the detection limit of 1.0 × 0^?8 mol L^?1. The relative standard deviation is 1.5% (n = 11) for the determination of 8.0 × 10^?7 mol L^?1 piroxicam. The proposed method was successfully applied to commercial tablets, spiked serum, and urine samples.     

Determination of Ethambutol in Aqueous Medium Using an Inexpensive Gold Microelectrode Array as Amperometric Sensor

In this paper, gold microelectrode array (Au‐MEA) were employed to determination of ethambutol in aqueous medium. Au‐MEA was constructed with an electronic microchip integrated circuit. The standard curve (analytical curve) was constructed for a single microelectrode (ME) in a concentration range of 5.0×10^?5 to 2.0×10^?3 mol L^?1, allowing estimation of both the limit of detection (LOD) (4.73×10^?5 mol L^?1) and the limit of quantification (LOQ) (1.57×10^?4 mol L^?1) for ethambutol. When the MEA was utilized, the LOD and LOQ were 1.55×10^?7 and 5.18×10^?7 mol L^?1, respectively. Our results indicated that Au‐MEA can be utilized as amperometric sensors for ethambutol determination in aqueous media.     

MDMA Electrochemical Determination and Behavior at Carbon Screen-printed Electrodes: Cheap Tools for Forensic Applications

This article describes a method that uses Carbon Screen-printed Electrodes (C-SPEs) to detect 3,4 – methylenedioxyamphetamine (MDMA) by Linear Sweep Voltammetry in aqueous medium. Major parameters of this technique were evaluated aiming improve the method sensibility. Amines interference were conducted in order to verify disturbs at the MDMA response. The method obtained a linear response from 1×10⁻⁵ mol L⁻¹ to 1×10⁻⁴ mol L⁻¹ with linear correlation coefficient of 0.996, Amperometric Sensitivity (AS) of 0.025 A×mol⁻¹ L, Limit of Detection (LOD) of 1,83×10⁻⁶ mol L⁻¹, and Limit of Quantification (LOQ) of 6,11×10⁻⁶ mol L⁻¹. The method applicability, reproducibility and reproducibility were carried over inter/intra days tests and its application on seized samples.     

Determination of Cr(VI) by Catalytic Adsorptive Stripping Voltammetry with Application of Nitrilotriacetic Acid as a Masking Agent

A selective and sensitive method for determination of traces of Cr(VI) in the presence of a large excess of Cr(III) by differential pulse catalytic adsorptive stripping voltammetry is presented. For minimization of Cr(III) interference nitrilotriacetic acid was used as a masking agent. The determinations were performed in a flow system. The calibration plot was linear from 1×10⁻¹⁰ to 1×10⁻⁸ mol L⁻¹ for accumulation time 60 s. The relative standard deviation for 3×10⁻⁹ mol L⁻¹ Cr(VI) was 4.1% (n=5). The detection limit for an accumulation time of 60 s was 4×10⁻¹¹ mol L⁻¹. The influence of common foreign ions is also presented. The performance of the method was verified by analysis of certified reference material for Cr(VI) and comparing the results of analyses of natural water samples with those obtained by another accepted electrochemical method.     

Comparative Study on Electroanalysis of Fenthion Using Silver Amalgam Film Electrode and Glassy Carbon Electrode Modified with Reduced Graphene Oxide

Oxidation and reduction processes of the insecticide fenthion was comparatively investigated at a reduced graphene oxide modified glassy carbon electrode (RGO‐GCE) and a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) using square wave stripping voltammetry (SWSV). The influence of pH and SW parameters was investigated. The linear concentration ranges were found to be 1 × 10⁻⁶ – 2 × 10⁻⁵ and 1 × 10⁻⁷ – 2 × 10⁻⁵ mol L⁻¹ for Hg(Ag)FE and RGO‐GCE, respectively. The detection and quantification limits were calculated as 1.3 × 10⁻⁷ and 4.5 × 10⁻⁷ mol L⁻¹ for Hg(Ag)FE and 7.6 × 10⁻⁹ and 2.5 × 10⁻⁸ mol L⁻¹ for RGO‐GCE. Both of the developed electroanalytical methods offer rapid and simple detection of fenthion and were used on spiked tap and river water and apple juice samples. Scanning electron microscopy was used for RGO‐GCE surface characterization.     

Square Wave‐Anodic Stripping Voltammetric Determination of Copper at a Bismuth Film/Glassy Carbon Electrode Using 3‐[(2‐Mercapto‐Vinyl)‐Hydrazono]‐ 1,3‐Dihydro‐Indol‐2‐One

This study reports a highly sensitive electrochemical sensor based on Bi film modified glassy carbon electrode (BiF/GCE) for total determination and speciation trace concentrations of copper(II) ions in environmental water samples. Square wave‐adsorptive anodic stripping voltammetric (SW‐ASV) experiment was performed for monitoring selective accumulation of copper(II) with reagent 3‐[(2‐mercapto‐vinyl)‐hydrazono]‐1,3‐dihydro‐indol‐2‐one (MHDI) at pH 9–10. The mechanism of the electrode reaction of Cu²⁺‐MHDI complex was safely assigned. The sensor exhibited a wide linear range (3.22×10⁻⁹–2.0×10⁻⁷ mol L⁻¹) with lower limits of detection (LOD) and quantitation (LOQ) of 9.6×1⁻¹⁰ and 3.22×10⁻⁹ mol L⁻¹, respectively (R²=0.9993). The proposed sensor exhibited interference from active metal ions e. g. Cd, Hg. The performance of the proposed method was compared successfully with most of the reported methods and comparable efficiencies were obtained. The analytical utility of the proposed SW‐ASV method has been successfully validated for trace analysis of copper(II) in environmental water samples. The method offers a precise, accurate approach with good reproducibility, robustness, ruggedness, and cost effectiveness.     

A New Approach for Decreasing the Detection Limit of Gentamicin Ion‐selective Electrodes by Incorporation of Multiwall Carbon Nanotubes (MWCNTs)/Lipophilic Anionic Additives

Two novel carbon paste electrodes based on gentamicin‐reineckate (GNS‐RN)/multiwall carbon nanotubes (MWCNTs)/sodium tetraphenyl borate (NaTPB) or potassium tetraphenylborate (KTPB) for potentiometric determination of gentamicin sulfate were constructed. Our endeavors of lowering the detection limit for gentamicin ion‐selective electrodes were described. The paper focused on gentamicin carbon paste electrodes based on GNS‐RN as electroactive material, o ‐nitrophenyloctyl ether (o ‐NPOE) as plasticizer and incorporation of MWCNTs and lipophilic anionic additives (NaTPB and KTPB) which lower the detection limit of the electrodes showing best results for determination of gentamicin ion. The characteristics of the electrodes, GNS‐RN+NaTPB+MWCNTs (sensor 1) and GNS‐RN+KTPB+ MWCNTs (sensor 2), were measured, showing favorable features as they provided measurements of the potential with near‐Nernstian slopes of 29.6±0.3 and 29.1±0.3 mV/decade over the concentration range of 1.0×10⁻⁶–1.0×10⁻² mol L⁻¹ and pH ranges 3.0–8.2 and 3.0–8.0 in short response times (6.5 sec). Importantly, the electrodes had low detection limits of 3.0×10⁻⁷and 3.4×10⁻⁷ mol L⁻¹ for the two sensors, respectively. The sensors showed high selectivity for gentamicin ion with respect to a large number of interfering species. The electrodes were successfully applied for the potentiometric determination of GNS ions in pure state, pharmaceutical preparations and human urine with high accuracy and precision. The results of this study were compared with some previously published data using other analytical methods.     

Voltammetric study and electroanalytical determination of contraceptive levonorgestrel using silver solid amalgam electrode fabricated with nanoparticles

Here we describe the investigation of the electrochemical behaviour and the electroanalytical quantification of hormonal contraceptive levonorgestrel using solid amalgam electrode fabricated with silver nanoparticles. Until now, to the best of our knowledge, this is the first report of the use of solid working electrodes for levonorgestrel determination. Over this electrodic surface, the substance showed one cathodic peak at E_p = ?1.41 V. Moreover, the electrochemical reduction of levonorgestrel was defined as an irreversible and mainly adsorption-controlled process involving two protons and two electrons. Square-wave adsorptive stripping voltammetry (SWAdSV) was used for the quantification of levonorgestrel. The instrumental and experimental parameters were studied and optimized. The best conditions of analysis were observed when using 0.04 mol L^?1 Britton–Robinson (BR) buffer at pH 6.0. The analytical signal of levonorgestrel showed a linear dependence on the concentration range from 5.03 × 10^?7 mol L^–1 to 1.01 × 10^?5 mol L^–1. The LOD and LOQ obtained were 9.09 × 10^?8 mol L^?1 and 3.03 × 10^?7 mol L^?1, respectively. The voltammetric method was employed for the quantification of levonorgestrel in real pharmaceutical formulations and urine samples. The results provided good concordance with the expected values. It makes the working electrode used here an interesting and less toxic option for the analysis of reducible substances in comparison with the HMDE.     

A Simple Approach to Simultaneous Electroanalytical Quantification of Acetaminophen and Tramadol Using a Boron‐doped Diamond Electrode in the Existence of Sodium Dodecyl Sulfate

The present work describes the individual, selective and simultaneous quantification of acetaminophen (ACP) and tramadol hydrochloride (TRA) using a modification‐free boron‐doped diamond (BDD) electrode. Cyclic voltammetric measurements revealed that the profile of the binary mixtures of ACP and TRA were manifested by two irreversible oxidation peaks at about +1.04 V (for ACP) and +1.61 V (for TRA) in Britton‐Robinson (BR) buffer pH 3.0. TRA oxidation peak was significantly improved in the presence of anionic surfactant, sodium dodecyl sulfate (SDS), while ACP signal did not change. By employing square‐wave stripping mode in BR buffer pH 3.0 containing 8×10^?4 mol L^?1 SDS after 30 s accumulation under open‐circuit voltage, the BDD electrode could be used for quantification of ACP and TRA simultaneously in the ranges 1.0–70 μg mL^?1 (6.6×10^?6–4.6×10^?4 mol L^?1) and 1.0–70 μg mL^?1 (3.3×10^?6–2.3×10^?4 mol L^?1), with detection limits of 0.11 μg mL^?1 (7.3×10^?7 mol L^?1) and 0.13 μg mL^?1 (4.3×10^?7 mol L^?1), respectively. The practical applicability of the proposed approach was tested for the individual and simultaneous quantification of ACP and/or TRA in the pharmaceutical dosage forms.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).     

Direct Electroanalytical Determination of Fluvastatin in a Pharmaceutical Dosage Form: Batch and Flow Analysis

Abstract

The reduction of luvastatin (FLV) at a hanging mercury-drop electrode (HMDE) was studied by square-wave adsorptive-stripping voltammetry (SWAdSV). FLV can be accumulated and reduced at the electrode, with a maximum peak current intensity at a potential of approximately ?1.26 V vs. AgCl/Ag, in an aqueous electrolyte solution of pH 5.25. The method shows linearity between peak current intensity and FLV concentration between 1.0 × 10^?8 and 2.7 × 10^?6 mol L^?1. Limits of detection (LOD) and quantification (LOQ) were found to be 9.9 × 10^?9 mol L^?1 and 3.3 × 10^?8 mol L^?1, respectively.

Furthermore, FLV oxidation at a glassy carbon electrode surface was used for its hydrodynamic monitoring by amperometric detection in a flow-injection system. The amperometric signal was linear with FLV concentration over the range 1.0 × 10^?6 to 1.0 × 10^?5 mol L^?1, with an LOD of 2.4 × 10^?7 mol L^?1 and an LOQ of 8.0 × 10^?7 mol L^?1. A sample rate of 50 injections per hour was achieved.

Both methods were validated and showed to be precise and accurate, being satisfactorily applied to the determination of FLV in a commercial pharmaceutical.     

3D‐printed Microfluidic Device Based on Cotton Threads for Amperometric Estimation of Antioxidants in Wine Samples

The present work describes the evaluation of microfluidic electroanalytical devices constructed by a 3D printer using ABS (acrylonitrile butadiene styrene) polymer combined with cotton threads as microchannels. Screen‐printed carbon electrodes (SPCEs) were used as electrochemical detector for amperometric determination of gallic and caffeic acid in wine samples. Using optimal experimental conditions (flow rate of 0.71 μL s⁻¹, applied potential of +0.30 V and volume of injection of 2.0 μL) the proposed method presented a linear response for a concentration range of 5.0×10⁻⁶ to 1.0×10⁻³ mol L⁻¹. The detection limits for gallic and caffeic acid were found to 1.5×10⁻⁶ mol L⁻¹ and 8.0×10⁻⁷ mol L⁻¹, respectively, with a sample throughput of 43 h⁻¹. The achieved results are in agreement with those found using the official Folin‐Ciocaulteu method.     

Determination of Picoxystrobin and Pyraclostrobin by MEKC with On-Line Analyte Concentration

Micellar electrokinetic capillary chromatography was used for the determination of picoxystrobin and pyraclostrobin. The background electrolyte consisted of borate buffer (40 mmol L⁻¹ pH 8.5), SDS (30 mmol L⁻¹) and acetonitrile (15% in volume). Runs were made at 25 °C with 25 kV applied potential. The developed method was applied to analyte fortified urine samples. On-line analyte concentration, combined with a capillary of a longer optical path length, allowed limits of quantification of 8.6 × 10⁻⁸ mol L⁻¹ for picoxystrobin and 1.8 × 10⁻⁷ mol L⁻¹ for pyraclostrobin.

     

Spectrophotometric Determination of Furosemide Based on Its Complexation with Fe(III) in Ethanolic Medium Using a Flow Injection Procedure

Abstract

A fast flow injection procedure with spectrophotometric detection based on the furosemide complexation with Fe(III) ions in ethanolic media is described. As carrier the flow single line system configuration used an ethanolic 10^?2 mol L^?1 Fe(III) solution flowing at 1.0 mL min^?1, a 50 cm sample loop (250 µL total sample injection), and a 50 cm long reactor coil, at room temperature. The detection at 513 nm presented a linear dynamic range from 1.00×10^?4 to 1.00×10^?2 mol L^?1, obeying the linear equation Abs=8.9×10^?3+22.3×[furosemide] (r=0.998, n=7). The limit of detection (3σ/slope) was 3.00×10^?5 mol L^?1. The proposed method was applied to four commercial samples from different suppliers, as tablets and ampoules, and a synthetic urine sample spiked with the analyte without an effect from the other substances present in the formulation. The proposed procedure presented an analytical frequency of 95 measurements per hour. The results agreed with those from both the label and those determined by a spectrophotometric comparative procedure. Recoveries close to 100% were found in the commercial formulations and synthetic urine matrixes.     

A Simple,sensitive, and selective electrochemical aptasensor for cortisol based on rGO-AuNPs

Cortisol is a steroid hormone naturally produced by the adrenal glands. It participates in and controls several processes in the body and is considered an important physiological biomarker. Due to its very low concentrations in body fluids, its detection requires high sensitivity and specificity. Here, we present a simple electrochemical biosensor based on reduced graphene oxide (rGO) modified with gold nanoparticles (AuNPs) for the immobilization of the cortisol-specific aptamer (Ap) (MCH-Ap-AurGO/GCE). Important analytical parameters for identifying the target analyte were optimized, such as conditions and amount of immobilized Ap, the influence of the concentration and nature of the supporting electrolyte, pH of the medium, and incubation time. The optimized conditions for the aptasensor were: concentration of Ap 1.0 × 10⁻⁶ mol L⁻¹, support electrolyte Tris/HCl 50 mmol L⁻¹, MgCl₂ 10 mmol L⁻¹, and NaCl 10 mmol L⁻¹, at pH 5.0 and incubation time of 15 min. A linear response range was obtained from 1 × 10⁻¹⁸ up to 1 × 10⁻¹¹ mol L⁻¹ of cortisol with a detection limit (LOD) of 1.0 × 10⁻¹⁸ mol L⁻¹. A curve adjusted for operational purposes in the saliva sample was fitted for the concentration range between 0.5 × 10⁻¹⁴ and 1 × 10⁻¹¹ mol L⁻¹, with a linear regression equation ΔRtc/Rtc₁ = 2.70 + 0.17 × log([Cortisol]). The aptasensor demonstrated a great potential for detecting cortisol in a simple, fast, and highly sensitive way, opening its path for application in real samples, which present levels below the concentration in which cortisol is commonly found in body fluids.     

Voltammetric Method for the Simultaneous Determination of Melatonin and Pyridoxine in Dietary Supplements Using a Cathodically Pretreated Boron‐doped Diamond Electrode

The simultaneous voltammetric determination of melatonin (MT) and pyridoxine (PY) has been carried out at a cathodically pretreated boron‐doped diamond electrode. By using cyclic voltammetry, a separation of the oxidation peak potentials of both compounds present in mixture was about 0.47 V in Britton‐Robinson buffer, pH 2. The results obtained by square‐wave voltammetry allowed a method to be developed for determination of MT and PY simultaneously in the ranges 1–100 μg mL⁻¹ (4.3×10⁻⁶–4.3×10⁻⁴ mol L⁻¹) and 10–175 μg mL⁻¹ (4.9×10⁻⁵–8.5×10⁻⁴ mol L⁻¹), with detection limits of 0.14 μg mL⁻¹ (6.0×10⁻⁷ mol L⁻¹) and 1.35 μg mL⁻¹ (6.6×10⁻⁶ mol L⁻¹), respectively. The proposed method was successfully to the dietary supplements samples containing these compounds for health‐caring purposes.     

Carbon Paste Electrode Modified with Biochar for Sensitive Electrochemical Determination of Paraquat

The present work reports for the first time the determination of paraquat (PQ²⁺) by Differential Pulse Adsorptive Stripping Voltammetry (DPAdSV) using a carbon paste electrode modified (CPME) with biochar obtained from castor oil cake at different temperatures (200–600 °C). The best voltammetric response was verified using biochar yielded at 400 °C (CPME‐BC400). Linear dynamic range (LDR) for PQ²⁺ concentrations between 3.0×10^?8 and 1.0×10^?6 mol L^?1 and a limit of detection (LOD) of 7.5×10^?9 mol L^?1 were verified. The method was successfully applied for PQ²⁺ quantification in spiked samples of natural water and coconut water.     

Voltammetric behavior and quantitative determination of ambazone concentrations in urine and in a pharmaceutical formulation

The use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) for the analytical determination of ambazone in urine samples and pharmaceutical formulations is described. A single reduction peak in Britton-Robinson buffer at pH 4.0 was detected at about ?1.4 V versus Ag/AgCl. Mechanistic studies have shown that the compound can act as an electrocatalyst. The method was validated. The analytical curve was linear in the concentration range from 1.0×10^?9 to 1.0×10^?7 mol L^?1. The detection and quantification limits were found to be 3.0×10^?10 mol L^?1 and 1.0×10^?9 mol L^?1, respectively. The proposed method was successfully applied to ambazone determination in real samples.