Metabolic footprinting of tumorigenic and nontumorigenic uroepithelial cells using two-dimensional gas chromatography time-of-flight mass spectrometry

In this study, gas chromatography mass spectrometry (GC-MS) and two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS) were employed for the metabolic footprinting of a pair of immortalized human uroepithelial cells namely HUC-1 (nontumorigenic) and HUC T-2 (tumorigenic). Both HUC-1 and HUC T-2 cell lines were cultivated in 1 mL of Ham’s F-12 media. Subsequent to 48 h of incubation, 200 μL of cell culture supernatant was protein-precipitated using 1.7 mL of methanol and an aliquot of 1.5 mL of the mixture was separated, dried, trimethylsilyl-derivatized, and analyzed using GC-MS and GC×GC-TOFMS. Metabolic profiles were analyzed using multivariate data analysis techniques to evaluate the changes of the metabolomes. Both GC-MS and GC×GC-TOFMS analyses showed distinct differences in metabolic phenotypes of the normal and tumorigenic human bladder cells (partial least squares-discriminant analysis (PLS-DA) of GC×GC-TOFMS data; two latent variables, R ² X = 0.418, R ² Y = 0.977 and Q ² (cumulative) = 0.852). Twenty metabolites were identified as being statistically different between the two cell types. These metabolites revealed that several key metabolic pathways were perturbed in tumorigenic urothelial cells as compared to the normal cells. Application of GC×GC-TOFMS offered several advantages compared to classical one-dimensional GC-MS which include enhanced chromatographic resolution (without increase in analytical run time), increase in sensitivity, improved identification of metabolites, and also separation of reagent artifacts from the metabolite peaks. Our results reinforced the advantages of GC×GC-TOFMS and the role of metabolomics in characterizing bladder cancer biology using in vitro cell culture models.     

Could be radiolabeled flavonoid used to evaluate infection?

The aim of this study was to determine whether [¹³¹I]apigenin is a powerful and discrimination infection from inflammation for scintigraphic imaging. The study was carried out in inflamed rats with Staphylococcus aureus (S. aureus) and sterile inflamed rats with turpentine oil. Biodistribution study of [¹³¹I]apigenin was performed in the rats. Apigenin was labeled with ¹³¹I by iodogen method. Obtained [¹³¹I]apigenin with high yield (98%) was injected i.v. to both group rats. The results were expressed as the percent uptake of injected dose per gram of organ (%ID/g), the bacterial infected and sterile inflamed muscles. Binding of [¹³¹I]apigenin to the infected thigh muscle (target muscle = T) and normal thigh muscle (non-target muscle = NT) ratio (T/NT = 4.51 at 15 min) was higher than binding to bacterial inflamed muscle (T/NT = 2.25 at 15 min) of rats. [¹³¹I]apigenin showed good localization in both inflamed tissues. This uptake in the sterile inflamed tissue is higher than bacterial infected tissue. [¹³¹I]apigenin might be useful for imaging of inflamed tissues. However, it is not discriminate sterile inflamed tissue from bacterial infected tissue.     

Preparation and biodistribution of [<Superscript>131</Superscript>I]linezolid in animal model infection and inflammation

Linezolid is the first of new class of antibiotics, the oxazolidinones, and exhibits activity against many gram-positive organisms, including vancomycin-resistant Enterococcus faecium, methicillin-resistant Staphylococcus aureus, and penicillin-resistant Streptococcus pneumoniae. Aim of the study: Linezolid was to label with I-131 and potential of the radiolabeled antibiotic was to investigate in inflamed rats with S. aureus (S. aureus) and sterile inflamed rats with turpentine oil. Linezolid was labeled with I-131 by iodogen method. Biodistribution of [¹³¹I]linezolid was carried out in bacterial inflamed and sterile inflamed rats. Radiolabeling yield of [¹³¹I]linezolid was determined as 85 ± 1% at pH 2. After injecting of [¹³¹I]linezolid into bacterial inflamed and sterile inflamed rats, radiolabeled linezolid was rapidly removed from the circulation via the kidneys. Binding of [¹³¹I]linezolid to bacterial inflamed muscle (T/NT = 77.48 at 30 min) was five times higher than binding to sterile inflamed muscle (T/NT = 14.87 at 30 min) of rats. [¹³¹I]linezolid showed good localization in bacterial inflamed tissue. It was demonstrated that [¹³¹I]linezolid can be used to detect S. aureus inflammation in rats.     

Poly(vinylferrocenium) perchlorate–polyaniline composite film-coated electrode for amperometric determination of hydroquinone

Poly(vinylferrocenium) perchlorate–polyaniline (PVF⁺–PANI) composite film was synthesized electrochemically on Pt electrode in a methylene chloride solution containing a mixture of poly(vinylferrocene) (PVF) polymer and aniline monomer. PVF⁺ polymer in the composite film was used as an electron transfer mediator. The composite coating showed significant electrochemical activity towards hydroquinone (HQ) at pH 4, with high sensitivity and a wide linearity range. The interaction of HQ with PVF⁺ and PANI homopolymer films was investigated electrochemically and spectroscopically. HQ molecules are accumulated on the electrode surface due to trapping by both polymers in the composite film and then oxidized catalytically by PANI. The most significant contribution of PVF⁺ polymer is that it facilitates electron transfer in the composite film. The linear response range was found to be between 1.60 × 10⁻⁴ mM and 115 mM (R ² = 0.999) at 0.45 V vs saturated calomel electrode. The limit of detection (LOD) was 4.94 × 10⁻⁵ mM.     

Effects of 660‐nm and 780‐nm Laser Therapy on ST88‐14 Schwann Cells

The aim of the present study was to evaluate the comparative effects of red (660‐nm) and near‐infrared (780‐nm) low‐level laser therapy (LLLT) on viability, mitochondrial activity, morphology and gene expression of growth factors on Schwann cells (SC). ST88‐14 cells were grown in RPMI 1640 with 10 mM of HEPES, 2 mM of glutamine, 10% fetal bovine serum and 1% antibiotic‐antimycotic solution at 37°C in humidified atmosphere of 5% CO₂. Cells were detached with trypsin and centrifugated at 231 g for 5 min at 10°C, and the pellet (8 × 10⁴ cells/tube) was irradiated at the bottom of 50 ml polypropylene tube with a Twin‐Laser system (660 and 780 nm, 40 mW, 1 mW cm^?2, 3.2 and 6.4 J, 80 and 160 J cm^?2 with 80 and 160 s). After 1, 3 and 7 days, the analysis was performed. After irradiation, the SC increase mitochondrial activity, gene expression of the neural growth factors NGF and BDNF, and cell migration and increase the G2/M cells. SC showed neuronal morphology, normal F‐actin cytoskeleton organization and positive labeling for S100. PBM increased metabolic activity, mitosis and gene expression when irradiated with red and infrared LLLT. An increase in cell migration was obtained when irradiated with infrared LLLT.     

A self-assembled monolayer based electrochemical immunosensor for detection of leukemia K562A cells

A novel strategy to quantify the cell number of leukemia K562A cells using electrochemical immunosensor was developed by effective surface immunoreaction between P-glycoprotein (P-gp) on cell membrane and P-gp mouse monoclonal antibody bound on an epoxysilane monolayer modified glassy carbon electrode. The surface morphologies of the epoxysilane monolayer and the bound antibodies were studied with atomic force microscopy. The binding of target K562A cells onto the immobilized antibodies increased the electron-transfer impedance of electrochemical probe, which depended linearly on the cell concentration in the range of 5.0 × 10⁴–1.0 × 10⁷ cells mL⁻¹. The detection limit of the immunosensor was 7.1 × 10³ cells mL⁻¹. The proposed strategy showed acceptable reproducibility with an RSD of 3.4% for the linear slope and good precision with the RSD of 3.7% and 3.0% examined at the cell concentrations of 2.0 × 10⁶ and 1.0 × 10⁷ cells mL⁻¹.     

A Nano-Chip-LC/MS<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript> Based Strategy for Characterization of Modified Nucleosides Using Reduced Porous Graphitic Carbon as a Stationary Phase

LC/MS analysis of ribonucleosides is traditionally performed by reverse phase chromatography on silica based C18 type stationary phases using MS compatible buffers and methanol or acetonitrile gradients. Due to the hydrophilic and polar nature of nucleosides, down-scaling C18 analytical methods to a two-column nano-flow setup is inherently difficult. We present a nano-chip LC/MS ion-trap strategy for routine characterization of RNA nucleosides in the fmol range. Nucleosides were analyzed in positive ion mode by reverse phase chromatography using a 75 μ × 150 mm, 5 μ particle porous graphitic carbon (PGC) chip with an integrated 9 mm, 160 nL trapping column. Nucleosides were separated using a formic acid/acetonitrile gradient. The method was able to separate isobaric nucleosides as well as nucleosides with isotopic overlap to allow unambiguous MS ⁿ identification on a low resolution ion-trap. Synthesis of 5-hydroxycytidine (oh⁵C) was achieved from 5-hydroxyuracil in a novel three-step enzymatic process. When operated in its native state using formic acid/acetonitrile, PGC oxidized oh⁵C to its corresponding glycols and formic acid conjugates. Reduction of the PGC stationary phase was achieved by flushing the chip with 2.5 mM oxalic acid and adding 1 mM oxalic acid to the online solvents. Analyzed under reduced chromatographic conditions oh⁵C was readily identified by its MH⁺ m/z 260 and MSⁿ fragmentation pattern. This investigation is, to our knowledge, the first instance where oxalic acid has been used as an online reducing agent for LC/MS. The method was subsequently used for complete characterization of nucleosides found in tRNAs using both PGC and C18 chips.     

Multi-target bioactive compound screening from the infructescence of Platycarya strobilacea Sieb. et Zucc. by affinity chromatography using immobilized β2-adrenoceptor and muscarinic-3 acetylcholine receptor as the stationary phase

As a main source for the recognition and identification of lead compounds, traditional Chinese medicine plays a pivotal role in preventing diseases for years. However, screening bioactive compounds from traditional Chinese medicine remains challenging because of the complexity of the systems and the occurrence of the synergic effect of the compounds. The infructescence of Platycarya strobilacea Sieb. et Zucc is prescribed for allergic rhinitis treatment with unknown bioactive compounds and unclear mechanisms. Herein, we immobilized the β₂-adrenoceptor and muscarine-3 acetylcholine receptor onto the silica gel surface to prepare the stationary phase in a covalent bond through one step. The feasibility of the columns was investigated by the chromatographic method. Ellagic acid and catechin were identified as the bioactive compounds targeting the receptors. The binding constants of ellagic acid were calculated to be (1.56 ± 0.23)×10⁷ M⁻¹ for muscarine-3 acetylcholine receptor and (2.93 ± 0.15)×10⁷ M⁻¹ for β₂-adrenoceptor by frontal analysis. While catechin can bind with muscarine-3 acetylcholine receptor with an affinity of (3.21 ± 0.05)×10⁵ M⁻¹. Hydrogen bonds and van der Waals’ force were the main driving forces for the two compounds with the receptors. The established method provides an alternative for multi-target bioactive compound screening in complex matrices.     

Amperometric enzyme electrode for glucose determination based on poly(pyrrole-2-aminobenzoic acid)

Polymerization of pyrrole and 2-aminobenzoic acid has been investigated, and a functionalized stable film of poly(pyrrole-2-aminobenzoic acid) (PP2ABA) has been obtained electrochemically onto platinum electrode. Different cyclic voltammetric behavior is obtained for polypyrrole and PP2ABA during electrosynthesis. Fourier-transformed infrared spectrometry and surface-enhanced Raman spectrometry measurements on the two films have confirmed the presence of carboxylate group in the films. The enzyme, glucose oxidase, was covalently immobilized on a conducting PP2ABA film, and amperometric response was measured as a function of concentration of glucose at a potential of 0.7 V vs Ag/AgCl in 0.1 M phosphate buffer at pH 6.2. The effect of polymeric film thickness, pH, and possible interferents were investigated. The linear range of the calibration curve is from 3 to 40 mM with a sensitivity of 0.058 μA mM⁻¹ cm⁻² and a limit of detection of 0.5 mM. The apperent Mishaelis–Menten constant K _M is calculated to be 1 × 10⁻² mM, and the response time is 5 s.     

Selective determination of drug resistant cancer cells on indium tin oxide electrode modified with nano titanium dioxide

A new electrochemical cell sensor, with low cost, simple fabrication, high selectivity and sensitivity was developed in this study. Titanium dioxide nanoparticles (nano-TiO₂) were assembled on the disposable indium tin oxide (ITO) electrodes for the immobilization of the drug sensitive leukemia K562/B.W. cells and drug resistant leukemia K562/ADM cells to fabricate the relative cell sensors. The different electrochemical behaviors of the probe allowed us to differentiate one type of leukemia cells from another. Furthermore, the results of electrochemical impedance spectroscopy indicated that the detection limit of the new cell sensor is 1.3 × 10³ cells ml^?1 with a linear range of 1.6 × 10⁴ to 1.0 × 10⁷ cells ml^?1. These results suggested the promising application of this nano-TiO₂ interface to construct the non-labeling potential-discriminative cell biosensors for clinical uses.     

Quenched phosphorescence as alternative detection mode in the chiral separation of methotrexate by electrokinetic chromatography

Quenched phosphorescence was used, for the first time, as detection mode in the chiral separation of methotrexate (MTX) enantiomers by electrokinetic chromatography. The detection is based on dynamic quenching of the strong emission of the phosphorophore 1-bromo-4-naphthalene sulfonic acid (BrNS) by MTX under deoxygenated conditions. The use of a background electrolyte with 3 mg/mL 2-hydroxypropyl-β-cyclodextrin and 20% MeOH in 25 mM phosphate buffer (pH 7.0) and an applied voltage of 30 kV allowed the separation of l-MTX and its enantiomeric impurity d-MTX with sufficient resolution. In the presence of 1 mM BrNS, a detection limit of 3.2 × 10⁻⁷ M was achieved, about an order of magnitude better than published techniques based on UV absorption. The potential of the method was demonstrated with a degradation study and an enantiomeric purity assessment of l-MTX. Furthermore, l-MTX was determined in a cell culture extract as a proof-of-principle experiment to show the applicability of the method to biological samples.     

A micellar electrokinetic chromatography approach using diastereomeric derivatization and a volatile surfactant for the enantioselective separation of selenomethionine

A MEKC methodology with UV detection was developed for the enantioselective separation of selenomethionine (SeMet). The use of (+)‐1‐(9‐fluorenyl)ethyl chloroformate (FLEC) as chiral derivatization reagent to form SeMet diastereomers enabled their subsequent separation using ammonium perfluorooctanoate (APFO) as a volatile pseudostationary phase. The effect of APFO concentration and pH, temperature, injection volume, and derivatization conditions (time and FLEC/SeMet ratio) were evaluated in order to select the best separation conditions. A chiral resolution of 4.4 for DL‐SeMet was achieved in less than 6 min using 100 mM APFO at pH 8.5 as electrophoretic buffer. Satisfactory results were obtained in terms of linearity, precision (RSD from 3.4 to 5.1% for migration times and from 1.8 to 4.6% for corrected peak areas), accuracy, and LODs (3.1 × 10^?6 M and 3.7 × 10^?6 M for d and l enantiomers, respectively). The method was successfully applied to the determination of l ‐SeMet in food supplements.     

Non-aqueous vanadium acetylacetonate electrolyte for redox flow batteries

The electrochemistry of a single-component redox flow battery employing vanadium(III) acetylacetonate in acetonitrile and tetraethylammonium tetrafluoroborate has been investigated. The electrode kinetics of the anodic and cathodic reactions were studied using cyclic voltammetry. The V(II)/V(III) and V(III)/V(IV) couples were quasi-reversible and together yielded a cell potential of 2.2 V. The diffusion coefficient for vanadium acetylacetonate was estimated to be in the range of 1.8–2.9 × 10^?6 cm² s^?1 at room temperature. The charge–discharge characteristics of this system were evaluated in an H-type glass cell, and coulombic efficiencies near 50% were achieved.     

Brompheniramine as a novel probe for indirect UV detection and its application for the capillary electrophoresis of adamantane drugs

Brompheniramine, an antihistamine drug, was employed as a novel UV probe for capillary electrophoresis with indirect UV detection of adamantane drugs (memantine, amantadine, and rimantadine). The probe possesses high molar absorptivity of 24 × 10³ L/mol cm at 6 mM, which enables the measurement of these nonchromophore analytes without derivatization. The simple background electrolyte (10 mM sodium dihydrogen phosphate (pH 5.0) containing 5 mM brompheniramine and 6 mM β‐cyclodextrin) provided the separation of the analytes in a short time (7.5 min). Under these conditions, brompheniramine had similar mobility to that of the analyte ions resulting in symmetric peaks with minimal electrodispersion. The analytes displace the probe at a one‐to‐one ratio with transfer values close to unity. β‐Cyclodextrin played a role in the resolution of the structurally similar adamantane derivatives. Method validation showed good linearity (r ² > 0.98), precision (%RSD ≤ 3.30), and accuracy (recoveries ranging from 98 to 109%). The proposed method was successfully applied to determine the adamantane content in pharmaceutical products.     

Characteristics of Light Emission and Radicals Formed by Contact Glow Discharge Electrolysis of an Aqueous Solution

In this work, light emissions and radicals formed by plasma of contact glow discharge electrolysis were investigated. The plasma was generated by glow discharges at the tip of a Pt anode in contact with a sulfuric acid solution. Emissions of H atoms and OH radicals were observed when the applied voltage was above 430 V. When the applied voltage increased to 450 V, emissions of O atoms were additionally detected. The emission intensities of these radicals and atoms increased with the increasing applied voltage. When the applied voltage exceeded 460 V, thermal radiation from the Pt anode was apparent in the visible and near infrared region. Electron temperature of the plasma increased with the applied voltage from 1.0 × 10⁴ to 1.5 × 10⁴ K by comparison of the intensities of H_α and H_β lines. The mean electron density was estimated to be 7.4 × 10¹⁷ cm⁻³ by the method of Stark broadening.     

Influence of biomass and gold salt concentration on nanoparticle synthesis by the tropical marine yeast Yarrowia lipolytica NCIM 3589

Cell-associated gold nanoparticles and nanoplates were produced when varying number of Yarrowia lipolytica cells were incubated with different concentrations of chloroauric acid (HAuCl₄) at pH 4.5. With 10⁹ cells ml⁻¹ and 0.5 or 1.0 mM of the gold salt, the reaction mixtures developed a purple or golden red colour, respectively, and gold nanoparticles were synthesized. Nanoparticles of varying sizes were produced when 10¹⁰ cells ml⁻¹ were incubated with 0.5, 1.0 or 2.0 mM chloroauric acid salt. With 3.0, 4.0 or 5.0 mM HAuCl₄, nanoplates were also observed. With 10¹¹ cells ml⁻¹ nanoparticles were synthesized with almost all the gold salt concentrations. The cell-associated particles were released outside when nanoparticle-loaded cells were incubated at low temperature (20 °C) for 48 h. With increasing salt concentrations and a fixed number of cells, the size of the nanoparticles progressively increased. On the other hand, with increasing cell numbers and a constant gold salt concentration, the size of nanoparticles decreased. These results indicate that by varying the number of cells and the gold salt concentration, a variety of nanoparticles and nanoplates can be synthesized. Fourier transform infrared (FTIR) spectroscopy revealed the possible involvement of carboxyl, hydroxyl and amide groups on the cell surfaces in nanoparticle synthesis.     

An enzymatic glucose/O2 biofuel cell: Preparation,characterization and performance in serum

This study demonstrates a new kind of single-walled carbon nanotubes (SWNT)-based compartment-less glucose/O₂ biofuel cell (BFC) with glucose dehydrogenase (GDH) and bilirubin oxidase (BOD) as the anodic and cathodic biocatalysts, respectively, and with poly(brilliant creysl blue) (BCB) adsorbed onto SWNT nanocomposite as the electrocatalyst for the oxidation of NADH. The prepared GDH-polyBCB-SWNT bioanode exhibits an excellent electrocatalytic activity toward the oxidation of glucose biofuel; in 0.10 M phosphate buffer containing 20 mM NAD⁺ and 100 mM glucose, the oxidation of glucose commences at −0.25 V and the current reaches its maximum of 310 μA/cm² at −0.05 V vs. Ag/AgCl. At the BOD-SWNT biocathode, a high potential output is achieved for the reduction of O₂ due to the direct electron transfer property of BOD at the SWNTs. In 0.10 M phosphate buffer, the electrocatalytic reduction of O₂ is observed at a high potential of 0.53 V vs. Ag/AgCl with an electrocatalytic current plateau of ca. 28 μA/cm² at 0.45 V under ambient air and ca. 102 μA/cm² under O₂-saturated atmosphere. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 40 mM glucose under O₂-saturated atmosphere, the power density of the assembled SWNT-based glucose/O₂ BFC reaches 53.9 μW/cm² at 0.50 V. The performance and the stability of the glucose/O₂ BFC are also evaluated in serum. This study could offer a new route to the development of new kinds of enzymatic BFCs with a high performance and provide useful information on future studies on the enzymatic BFCs as in vivo power sources.     

Electrochemical properties of liquid electrolyte added quasi-solid state TiO2 dye-sensitized solar cells

In this study a process has been introduced to replace traditional liquid or solid electrolyte coatings on dye-sensitized photoelectrode in solar cells. This process has more efficient diffusion of electrolyte, hence higher sensitivity. Better interfacial contact between polymer electrolyte and TiO₂ photoelectrode had improved electrochemical response and ionic conductivity of cell. Conductivity of this electrode was 9.33 × 10⁻³ S cm⁻¹ (at room temperature), which is much higher than the using traditional process for addition of electrolytes. It has 0.68 V open-circuit voltage and 3.19 mA cm⁻² short-circuit current density. Energy conversion efficiency of this cell was about 37% higher than the cell developed with traditional processes under constant light intensity (45 mW cm⁻²).     

Simple sensor for simultaneous determination of dihydroxybenzene isomers

A simple sensor based on bare carbon ionic liquid electrode was fabricated for simultaneous determination of dihydroxybenzene isomers in 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0). The oxidation peak potential of hydroquinone was about 0.136 V, catechol was about 0.240 V, and resorcinol 0.632 V by differential pulse voltammetric measurements, which indicated that the dihydroxybenzene isomers could be separated absolutely. The sensor showed wide linear behaviors in the range of 5.0 × 10⁻⁷–2.0 × 10⁻⁴ mol L⁻¹ for hydroquinone and catechol, 3.5 × 10⁻⁶–1.535 × 10⁻⁴ mol L⁻¹ for resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 5.0 × 10⁻⁸, 2.0 × 10⁻⁷, 5.0 × 10⁻⁷ mol L⁻¹, respectively (S/N = 3). The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater and the recovery was from 93.9% to 104.6%.     

N-functionalized cyclam based trinuclear copper(II) complexes: electrochemical,magnetic, catalytic and antimicrobial studies

A series of trinuclear Cu(II) complexes have been prepared by Schiff base condensation of 1,8-[bis(3-formyl-2-hydroxy-5-methyl)benzyl]-l,4,8,11-tetraazacyclotetradecane and 1,8-[bis(3-formyl-2-hydroxy-5-bromo)benzyl]-l,4,8,11-tetraazacyclotetradecane with aromatic and aliphatic diamines, Cu(II) perchlorate and triethylamine. The complexes were characterized by elemental and spectroscopic analysis. Electrochemical studies of the complexes in DMF solution show three irreversible one-electron reduction processes around E_pc ¹ = −0.73 to −0.98 V, E_pc ² = −0.91 to −1.20 V and E_pc ³ = −1.21 to −1.33 V. ESR spectra and magnetic moments of the trinuclear Cu(II) complexes show the presence of antiferromagnetic coupling. The rate constants for hydrolysis of 4-nitrophenylphosphate by the Cu(II) complexes are in the range of 3.33 × 10⁻² to 7.58 × 10⁻² min⁻¹. The rate constants for the catecholase activity of the complexes fall in the range of 2.67 × 10⁻² to 7.56 × 10⁻² min⁻¹. All the complexes were screened for antifungal and antibacterial activity.