A simplified compression test for the estimation of the Poisson's ratio of viscoelastic foams

This paper describes a simplified procedure for determining the Poisson's ratio of homogeneous and isotropic viscoelastic materials. A cylindrical shaped material is axially excited by an electromagnetic shaker and consequent displacement waves are investigated. Using a frequency sweep as an excitation signal, the frequency domain displacement response is measured upstream and sideways of the sample itself. A plane cross-section analytical model of the experimental setup is used to estimate Poisson's ratio through a minimisation-based procedure, applied to radial displacement once the complex modulus has been directly determined under the assumption of spring-like behaviour of the axial displacement. The results are presented and discussed for different materials and compared to well-established quasi-static and finite element simulations.     

Role of PTFE paste fibrillation on Poisson's ratio

Polytetrafluoroethylene (PTFE) flat profiles were extruded using slit dies, which promoted orientation of fibrils in two directions (2-D). Uniaxial tensile experiments were performed on the collected extrudates using the Sentmanat Extensional Rheometer (SER) at different temperatures and Hencky strain rates to determine the mechanical properties of the material. A nonlinear viscoelastic model developed by Matsuoka was found to describe well the transient tensile results using Poisson's ratio as a parameter. Polarized Raman Spectroscopy was also used to gain additional information on the degree of fibril orientation at different locations both along and across the width and length of the extrudates. Results of the Raman spectra were found to be in agreement with the fibril structure/morphology obtained from SEM micrographs. The compressibility of the extrudates upon stretching was studied by measuring the relative density. The results are modeled using a simple equation including the elastic strain recovery coefficient (κ) and Poisson's ratio.     

Determination of creep compliance,recovery and Poisson's ratio of elastomers by means of digital image correlation (DIC)

This work aims to determine the creep compliance, creep recovery and Poisson's ratio of three common sealing elastomers by means of the digital image correlation (DIC). The tests were conducted by stressing specimens under three different constant stresses during short duration experiments (3 h) to see the prospective of DIC for this application. The strains were measured in x and y axes with time. Thus, the behavior of creep compliance, creep recovery, and the Poisson's ratio of each elastomer were obtained. The creep results exhibited repeatability, as well as, the mean Poisson's ratios estimated were close to reported values for elastomers. Finally, despite of some limitations from the DIC equipment, it was found that this procedure can be implemented as a suitable alternative for the characterization of creep compliance, creep recovery and Poisson's ratio of elastomers. Also, it may be enhanced by following some recommendations given.     

An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

Metamaterials are specifically designed materials that possess unique properties that cannot be found in naturally occurring substances. These remarkable materials have the capability to bring about a significant transformation across a wide range of industries. Auxetic structures are a recent area of research possess a distinctive characteristic known as a negative Poisson's ratio. Unlike conventional materials that contract when stretched, auxetic structures actually expand in two dimensions. In this study, a new auxetic structure was introduced, and thermoplastic polyurethane samples were 3D printed using a fused filament fabrication method. The samples are then subjected to strains ranging from 5% to 50% and Poisson's ratios are measured both experimentally and numerically using finite element method in Ansys software. By comparing the results of the experimental research and simulation, it is evident that applying strains within this range causes the Poisson's ratio of the samples to change from −0.81 to −0.14 and it showed that the newly introduced structure is auxetic. According to the analysis of root mean square error, the hexagonal mesh with a size of 0.7 mm consistently produced the most accurate results, aligning closely with the experimental sample. Given that this is an entirely novel auxetic structure within the category of arrow-head auxetic structures, there is potential for future research to be conducted in order to further develop and enhance this model.     

A metabolomic study of the urine of rats with Alzheimer's disease and the efficacy of Ding‐Zhi‐Xiao‐Wan on the afflicted rats

As a well‐known traditional Chinese medicine formula, Ding‐Zhi‐Xiao‐Wan has long been used for the routine treatment of Alzheimer's disease. However, the mechanism of Ding‐Zhi‐Xiao‐Wan in treating Alzheimer's disease is unclear. Therefore, a nontargeted metabolomics method based on ultrahigh performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry has been established to explore the metabolic variations in the urine of Alzheimer's disease rats and investigate the therapeutic mechanism of Ding‐Zhi‐Xiao‐Wan on Alzheimer's disease. To develop a better rat model of Alzheimer's disease, amyloid β25‐35 was injected into the bilateral hippocampus of Sprague–Dawley rats. Multivariate analysis approaches were applied to differentiate the urine components between the four groups. Thereafter, a targeted metabolomics method was used to verify the identified endogenous metabolites and determine the mechanism of action of Ding‐Zhi‐Xiao‐Wan. Altogether, 26 potential biomarkers were found, of which 15 biomarkers (10 of which are potential biomarkers found in nontargeted metabolomics) were identified. The results show that Ding‐Zhi‐Xiao‐Wan mainly affects the pathways of taurine and hypotaurine metabolism, tryptophan metabolism, and phenylalanine metabolism. Ding‐Zhi‐Xiao‐Wan might play a role in the treatment of Alzheimer's disease by mediating antioxidative stress, regulation of energy metabolism, improvement of intestinal microbes, and protection of nerve cells.     

A comparative study on volatile metabolites profile of Dracaena cochinchinensis (Lour.) S.C. Chen xylem with and without resin using GC‐MS

Dragon's blood is a famous traditional Chinese medicine produced from source plants under bio‐ or abio‐stress. Dracaena cochinchinensis (Lour.) S.C. Chen xylem (DX) is one of the most important sources of the medicine. In this work, a GC‐MS method was developed for analysis of the n‐hexane extracts of DX with resin (DXR) and without resin (DXW). The repeatability of the method was also investigated for a metabolite comparative study of the different xylems. About 80 components were detected, 26 of which were identified in both DXR and DXN. Three sesquiterpenes (τ‐cadinol, τ‐muurolon and α‐cadinol) were first discovered in Dracaena cochinchinensis (Lour.) S.C. Chen. The chromatographs of the two plant materials were compared and differences of compounds were found. It showed that phytosterols showed a dramatic rise in content, and sesquiterpenes were found to be synthesized in DXR. Copyright © 2015 John Wiley & Sons, Ltd.