水相胶束体系中底物微环境对辣根过氧化物酶催化反应的影响

利用荧光测活法比较了HRP在有机相与水相胶束体系中催化不同芳香胺类的动力学常数,发现在水相胶束体系中,HRP是在一个较严格的亲、疏水界面进行催化反应。同时对界面酶学性质进行了初步研究,讨论了在胶束中不同增溶位置对反应动力学常数的影响。     

固定化辣根过氧化物酶和硫堇的过氧化物传感器

利用卡拉胶水凝胶将辣根过氧化物酶和硫堇同时固定在玻碳电极表面,制备以硫堇为媒介体的过氧化物电化学传感器.包埋在卡拉胶水凝胶中的硫堇在pH=7.0的磷酸缓冲溶液中出现了1对氧化还原峰,氧化峰电位和还原峰电位分别在-0.176和-0.264 V,电位差为88 mV,电流比近似为1,说明硫堇在电极表面发生准可逆的电化学反应.硫堇能作为辣根过氧化物酶催化还原过氧化物中的电子媒介体,加速催化还原过程中的电子传递,减少了催化还原过程中的其它氧化物的干扰.传感器检测过氧化物(过氧化氢、异丙苯基过氧化氢、过氧化丁酮、叔丁基过氧化氢)具有较快的响应时间和良好的灵敏度、重现性、稳定性及较长的使用寿命.     

固定化辣根过氧化物酶在有机/水混合溶液中的电化学

用魔芋多糖(KGM)将辣根过氧化物酶(HRP)固定在玻碳电极(GCE)表面, 制备了HRP-KGM膜修饰电极. 在乙醇等亲水性有机溶剂与水的混合溶液中, 包埋在KGM中的HRP 可以与电极发生直接电子传递, 且能催化还原过氧化氢、氢过氧化异丙基苯、氢过氧化叔丁基、过氧化丁酮等过氧化物. HRP-KGM膜修饰电极具有较好的稳定性和重现性, 可用于这些物质的定量检测.     

邻苯二甲酸酐化学修饰对辣根过氧化物酶催化活性的影响

通过采用邻苯二甲酸酐(PA)对辣根过氧化物酶(HRP)的蛋白链进行修饰, 研究了PA化学修饰对HRP的稳定性、催化活性、活性中心结构、酶对底物的亲合性和专一性等催化性质的影响. 结果显示: 酸性条件下(pH=3), 4小时后PA-HRP的催化活性比天然HRP提高了7.5%;碱性条件下(pH=10), 4小时后PA-HRP的催化活性比天然HRP提高了27%. PA-HRP的K_m值为8.16 (mmol/L), 小于天然HRP的K_m值12.99 (mmol/L), 而PA-HRP的k_(cat)/K_m值为7.86(10~4(L/ mmol· min)大于天然HRP的k_(cat)/K_m的6.70(10~4(L/ mmol· min). 这些催化活性和动力学数据表明了PA-HRP与天然HRP相比其稳定性、酶对底物的亲和性和专一性得到了提高. 紫外-可见光谱、拉曼光谱数据显示: 修饰剂PA 改变了天然HRP血红素周围的微环境, 对酶蛋白分子的活性中心结构并没有影响. 差示光谱显示PA修饰剂可以提高酶对底物的亲和力.     

催化荧光光度法测定辣根过氧化物酶及甲胎蛋白

建立了催化动力学荧光光度法测定辣根过氧化物酶（ＨＲＰ）及人甲胎蛋白（ＡＦＰ）的新方法。在含ＴｒｉｔｏｒＸ－１００的磷酸盐缓冲溶液中,辣根过氧化氢氧化邻苯二胺的产物２,３－二氨基吩嗪的荧光强度有明显的增强。在一定的实验条件下,该产物的荧光强度与ＨＲＰ的量成正比,方法对ＨＲＰ的线性范围为１０～２００pg,线性相关系数为０．９９５６,最低检出下限可达８pg,其相对标准偏差为３．２％（n＝１０）。应用此测定体     

胶囊固定化辣根过氧化物酶酶促体系引发丙烯酰胺聚合研究

研究了以海藻酸钠／壳聚糖／海藻酸钠为囊壁材料的胶囊固定化辣根过氧化物酶的制备及其影响因素,并将肢囊固定化辣根过氧化物酶／乙酰丙酮／H2O2酶促体系用于引发丙稀酰胺的聚合。结果表明,作为囊壁材料之一的壳聚糖的平均分子量以1万左右为宜,以柠檬三酸钠溶液为溶芯荆的溶芯时间控制在2～4min时,固定化率可达60％,相对于游离酶,其相对活力约为60％。胶囊固定化辣根过氧化物酶／乙酰丙酮／H2O2酶促体系可引发丙稀酰胺的聚合。     

超顺磁性氧化石墨烯复合材料固定辣根过氧化物酶催化去除氯酚

采用超声辅助共沉淀法成功地将磁性Fe3O4纳米颗粒沉积在氧化石墨烯表面,利用透射电镜、磁滞回归曲线和X射线光电子能谱对材料进行了表征。将该材料作为载体固定辣根过氧化物酶,考察了固定化酶催化2-氯酚、4-氯酚和2,4-二氯酚降解反应,研究了溶液pH值、反应温度、反应时间、H2O2和氯酚浓度以及固定化酶用量对酚类物质去除率的影响。基于取代基数量和位置不同,去除率排序为2-氯酚<4-氯酚<2,4-二氯酚。另外,采用GC-MS研究了降解过程中的氧化产物。固定化酶的生化性质研究表明,固定化酶比游离酶具有更好的储存稳定性、pH稳定性和热稳定性。经过4次循环利用,固定化酶仍保留66%的活性,说明磁性纳米材料可以分离回收并重复利用,在污水处理领域具有应用前景。     

利用对辣根过氧化物酶催化体系的干扰测定左旋多巴

提出辣根过氧化物酶法分析左旋多巴，方法基于一定条件下左旋多巴对辣根过氧化物酶催化对氯苯酚－４－ＡＡＰ偶联发色体系有干扰，干扰程度与左旋多巴的有浓度有相关性。     

水相中辣根过氧化物酶的反应动力学和机理研究

利用分光光度法 ,对水相中辣根过氧化物酶与底物反应的最适反应条件进行了研究 .同时 ,用停流法探讨了 2 5℃时辣根过氧化物酶反应过程中各种中间化合物的形成和消失速度 ;并用停流光谱法对稳态动力学的研究结果进行了验证     

有序介孔碳的微波快速合成和表面修饰及其负载性能

以低聚合度酚醛树脂为碳源、三嵌段共聚物F127(Mw=12600,PEO106PPO70PEO106)为模板导向剂,以微波辐照替代传统的烘箱热聚合,在常见功率下(400～800W)快速(15～60min)聚合,并高温碳化获得介孔碳。XRD、TEM、低温N2吸脱附等测试表明所得样品具有高度有序的介孔结构,比表面积和孔容分别可达614m2·g-1和0.47cm3·g-1。合成的介孔碳经NaBH4和胶体钯溶液两步修饰处理,表面被活化并沉积了Pd颗粒,导电性和亲水性均得到改善,载Pt的量和分散性明显提高,Pt/C催化剂的电化学活性面积由4m2·g-1增加到29m2·g-1。     

Hollow Mesoporous Carbon Spheres with Magnetic Cores and Their Performance as Separable Bilirubin Adsorbents

Hollow mesoporous carbon spheres with magnetic cores are directly replicated from hollow mesoporous aluminosilicate spheres with hematite cores by a simple incipient‐wetness impregnation technique. The amount of magnetic cores and the saturation magnetization value can be easily tuned by changing the concentration of iron nitrate solution used in the synthesis procedure. As‐prepared hollow mesoporous carbon spheres with magnetic cores are used as separable bilirubin adsorbents and show very good adsorptive properties. The characteristics of as‐prepared composites are examined by XRD, N₂ sorption, TEM, vibrating‐sample magnetometry, and UV/Vis spectroscopy.     

有序介孔炭的合成及液相有机大分子吸附性能研究

分别采用有序介孔氧化硅SBA-15和NaY分子筛为硬模板合成了系列有序介孔炭OMC和微孔炭CFY. N₂静态吸附测试表明, 所合成的介孔炭具有丰富的介孔结构和集中的介孔分布. 以亚甲基蓝为探针分子, 研究其在有序介孔炭OMC和微孔炭CFY上的吸附行为. 研究结果表明, 有序介孔炭中大于3.5 nm的大介孔孔容是决定亚甲基蓝吸附容量和吸附速率的关键因素. 吸附动力学理论研究表明, 准二级动力学方程可以很好地描述亚甲基蓝分子在介孔炭上吸附动力学行为.     

有序介孔碳的合成及其相转变机理的研究

采用十六烷基三甲基溴化铵(CTAB)作为模板剂, 正硅酸乙酯(TEOS)为硅源, 在碱性条件下, 用低温合成方法合成了有序介孔硅, 并以此为硬模板, 蔗糖为碳前驱体, 采用液相浸渍方法填充碳源, 制备出有序介孔碳. 通过XRD、TEM、N₂吸附-脱附等测试方法对其表征, 结果表明合成的介孔材料高度有序, 均具有很高的比表面积(介孔硅, 992～1096 m²/g; 介孔碳, 930～1208 m²/g), 较大的孔容和较窄的孔径分布. 还发现随着反应温度的升高, 介孔硅的结构从二维六方相(p6mm)转变为三维立方相(Ia3d); 介孔碳在复制介孔硅后, 其结构也从三维立方相(Ia3d)转变为四方相(I4₁/a), 并对相转变机理做了初步探讨.     

Mechanochemical Synthesis of Ruthenium Cluster@Ordered Mesoporous Carbon Catalysts by Synergetic Dual Templates

Ruthenium (Ru)@Ordered mesoporous carbon (OMC) is a key catalyst in fine-chemical production. In general, the OMC support is prepared by a wet self-assembly requiring excessive solvent, toxic phenol–aldehyde precursors and a long reaction time, followed by post-immobilization to load Ru species. Herein, we wish to report a solid-state, rapid, and green strategy for the synthesis of Ru@OMC with biomass tannin as the precursor. The chemistry essence of this strategy lies in the mechanical-force-driven assembly, during which tannin-metal (Zn²⁺ and Ru³⁺) coordination polymerization and hydrogen-bonding interactions between tannin-block copolymer (PEO-PPO-PEO, F127) simultaneously occur. After thermal treatment, Ru@OMC catalysts with mesoporous channels, narrow pore-size distribution (≈7 nm), and high surface area (up to 779 m² g⁻¹) were directed by F127 micelles. Meanwhile, the Zn²⁺ ions dilute Ru³⁺ and avoid the sintering of Ru species, resulting in Ru clusters around 1.4–1.7 nm during carbonization (800 °C). Moreover, the Ru@OMC catalyst afforded a good activity (TOF: up to 4170 h⁻¹) in the selective oxidation of benzyl alcohol to benzaldehyde by molecular oxygen.     

介孔SiO2的改性及对诺维信漆酶的交联固定化

采用十六烷基三甲基溴化铵(CTAB)为模板剂,四乙氧基硅烷(正硅酸乙酯,TEOS)为硅源,硝酸为催化剂来制备介孔SiO2,并采用后嫁接法对介孔SiO2进行氨基化改性。利用红外光谱(IR),X射线粉末衍射(XRD),差热-热重分析(DTA-TG),扫描电镜(SEM),元素分析,微电泳法及N2吸附-脱附方法对改性前后的产物进行表征。结果表明氨基已成功嫁接到介孔SiO2孔道中,改性后的介孔SiO2有序度有所下降,但仍为介孔材料;改性之后介孔材料的孔径、比表面积、孔体积均变小。等电点由原来的2.74变为4.75。本文还以氨基修饰的介孔SiO2为载体,通过交联剂戊二醛固定诺维信(Novozymes)工业级漆酶,并采用正交设计法对固定化条件进行了优化。研究表明漆酶经固定化后,其操作稳定性比游离酶高。     

Three‐Dimensional Ultralarge‐Pore Ia3d Mesoporous Silica with Various Pore Diameters and Their Application in Biomolecule Immobilization

Highly ordered mesoporous three‐dimensional Ia3d silica (KIT‐6) with different pore diameters has been synthesized by using pluronic P123 as surfactant template and n‐butanol as cosolvent at different synthesis temperatures in a highly acidic medium. The materials were characterized by XRD and N₂ adsorption. The synthesis temperature plays a significant role in controlling the pore diameter, surface area, and pore volume of the materials. The material prepared at 150 °C, KIT‐6‐150, has a large pore diameter (11.3 nm) and a high specific pore volume (1.53 cm³ g^?1). We also demonstrate immobilization of lysozyme, which is a stable and hard protein, on KIT‐6 materials with different pore diameters. The amount of lysozyme adsorbed on large‐pore KIT‐6 is extremely large (57.2 μmol g^?1) and is much higher than that observed for mesoporous silicas MCM‐41, SBA‐15, and KIT‐5, mesoporous carbons, and carbon nanocages. The effect of various parameters such as buffer concentration, adsorption temperature, concentration of the lysozyme, and the textural parameter of the adsorbent on the lysozyme adsorption capacity of KIT‐6 was studied. The amount adsorbed mainly depends on solution pH, ionic strength, adsorption temperature, and pore volume and pore diameter of the adsorbent. The mechanism of adsorption on KIT‐6 under different adsorption conditions is discussed. In addition, the structural stability of lysozyme molecules and the KIT‐6 adsorbent before and after adsorption were investigated by XRD, nitrogen adsorption, and FTIR spectroscopy.     

乳液分散法制备高分散纳米锡/介孔碳复合材料及其电化学性能

以间苯二酚和糠醛聚合而成的可溶性树脂为碳源,SnCl2为锡源,表面活性剂F127为模板剂,通过乳液分散法将锡源原位复合嵌入于介孔碳材料中,制备了纳米锡基材料高度分散于介孔碳中的复合材料。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、N2吸脱附(BET)、循环伏安(CV)等对材料的微观结构和电化学性能进行了表征。结果显示锡基材料在介孔碳中较为密集,分布均匀,粒径小于5 nm。介孔碳丰富的孔道结构有效限制和缓解了锡基材料的生长、团聚和体积膨胀,同时高比表面积增加了电解液与锡基活性材料的接触,提供了更多的反应活性点,从而获得了更高的电化学活性。充放电测试结果显示,700℃热处理后,锡/介孔碳纳米复合材料经过50次循环后实际放电比容量达203.4 mAh.g-1,表现出良好的电化学性能。     

Step‐Up Synthesis of Periodic Mesoporous Organosilicas with a Tyrosine Framework and Performance in Horseradish Peroxidase Immobilization

New amino‐acid‐bridged periodic mesoporous organosilicas (PMOs) were constructed by hydrolysis and condensation reactions under acid conditions in the presence of a template. The tyrosine bissilylated organic precursor (TBOS) was first prepared through a multistep reaction by using tyrosine (a natural amino acid) as the starting material. PMOs with the tyrosine framework (Tyr‐PMOs) were constructed by simultaneously using TBOS and tetraethoxysilane as complex silicon sources in the condensation process. All the Tyr‐PMOs materials were characterized by XRD, FTIR spectroscopy, N₂ adsorption–desorption, TEM, SEM, and solid‐state ²⁹Si NMR spectroscopy to confirm the structure. The horseradish peroxidase (HRP) enzyme was first immobilized on these new Tyr‐PMOs materials. Optimal conditions for enzyme adsorption included a temperature of 40 °C, a time of 8 h, and a pH value of 7. Furthermore, the novel Tyr‐PMOs materials could store HRP for approximately 40 days and maintained the enzymatic activity, and the Tyr‐PMOs–10 % HRP with the best immobilization effect could be reused at least eight times.     

介孔碳纳米材料的制备与改性

介孔碳纳米材料因具有快速传输通道、优异的导电性、极高的比表面积和出色的化学稳定性在众多领域受到广泛关注.实现介孔碳纳米材料的可控制备和精准改性是当前的研究热点和重点.基于此,本文分析总结了这类材料的制备和改性方法,并讨论了存在的问题和未来研究方向.