一个多值映象的随机不动点定理

本文讨论Polish空间中一类多值映象的随机不动点定理。本文的结果改进和推广了最近Itoh的结果,在单值的情形,本文的结果也推广了Bharucha-Reid,paek,Hanr 的结果。     

分析结构非线性问题的杂交可变基Galerkin方法

基于渐近摄动理论和Galer-kin方法,本文提出分析结构非线性问题的杂交可变基Galer-kin方法。本文方法首次引入可变基函数的概念,可大幅度降低计算量,而且在有限元法等数值方法中易于推广应用,在解决非线性问题领域有广泛应用前景。最后本文分析圆板大挠度问题和扁球壳大挠度问题,以验证本文方法的有效性。     

拓扑有限交性质及极大极小定理*

本文研究了更一般的拓扑有限交的性质。作为应用,利用本文结果给出了更一般的极大极小定理。本文结果推广了[5,6,9]中的主要结果。     

异方差情形下平均处理效应的半参数估计

本文主要探讨在扰动项分布对称的假定下,平均处理效应的半参数估计。本文考虑了一种非常普遍形式的异方差,使得我们在估计平均处理效应时,大大扩展了对异方差的处理范围。本文给出了N~(1/2)收敛速度的一致估计量及其渐进正态性质。本文遵循参数框架下常见的两步估计方法,这种方法广泛地运用于半参数的研究中。一个简单的Monte Carlo模拟将用来对比说明本文中估计方法的实际意义。     

异常观测数据的逐点剔除法

本文通过引进一类特殊的统计量和对其统计性质的分析,得到了一种线性回归函数因变量异常观测数据的逐点剔除方法,该方法能很快地认识和剔除含粗大的误差的观测数据,具有低的误判概率。本文还给出了与本文方法配套的数值算法,说明本文方法的数值实例和仿真结果。     

关于半拓扑空间

文[2]、[3]引入了半拓扑空间的概念,本文继续[2]、[3]讨论半拓扑空间的性质。本文的主要目的,在于统一处理H-闭空间,近似紧空间、S-闭空间与U-闭空间。文[5]—[10]的一些结果,可以作为本文定理的特例得出,其中部分结果得到了改进。另外,本文还给出有关上述空间的一些新结果。本文未加定义而直接使用的概念与术语的意义,可参考文[1]—[3]。     

基于非参数控制图的数据质量监控方法改进研究

为监控多条多变量数据流的数据质量,本文提出了几种监控方法。本文首先介绍了统计过程控制领域的背景知识。之后本文采用闵式距离准则,基于3类常用的闵式距离,提出了3种EWMA类型的非参数控制图,此外,本文基于向量内积提出了第4种EWMA类型的非参数控制图。首先通过统计模拟,比较了4种控制图在不同的相关性水平下,对单条数据流过程均值漂移的监控效果。随后本文研究了平滑系数λ的取值对监控效果的影响。之后,本文将上述4种思路拓展到了大样本的情形,提出了5种可以监控多条数据流质量的方法。将这5种方法和现有的一种典型方法做了比较,比较了它们对不同幅度漂移的监控效果。最后使用山体滑坡的监控数据,比较了它们对实际数据的监控效果,显示了本文提出方法的优势。     

基于应急供应链的物流配送计划研究

本文研究了基于应急供应链的物流配送计划问题,针对节点失效采用了供应链扩容策略,建立了在有限资源约束下单目标成本优化数学模型,以实现供应链运行总成本最小。然后,本文用CPLEX软件求解模型得到供应链的扩容方案。数值仿真结果表明本文所提出的扩容方法的有效性和实用性。     

最优值函数的方向导数

本文详细介绍了参数非线性规划问题最优值函数的方向导数的存在性、表示形式和有关的发展历史,本文不仅讨论了这一问题的经典结论,还叙述了最近二十年来的新结果。本文最后指出进一步研究的方向。     

向量变分和向量拟变分不等式解的存在性定理及应用

本文利用纯量化方法及ＫＫＭ技巧,研究向量变分和向量拟变分不等式解的存在性问题,作为应用本文还研究了向量互补问题及最优化问题解的存在性及其等价性刻划。本文结果改进和推广了已有的结果。     

The generalized hierarchical product of graphs

A generalization of both the hierarchical product and the Cartesian product of graphs is introduced and some of its properties are studied. We call it the generalized hierarchical product. In fact, the obtained graphs turn out to be subgraphs of the Cartesian product of the corresponding factors. Thus, some well-known properties of this product, such as a good connectivity, reduced mean distance, radius and diameter, simple routing algorithms and some optimal communication protocols, are inherited by the generalized hierarchical product. Besides some of these properties, in this paper we study the spectrum, the existence of Hamiltonian cycles, the chromatic number and index, and the connectivity of the generalized hierarchical product.     

城市老旧居住小区交通环境评价指标与评价方法

定量的评判城市老旧居住小区整体交通环境质量并进而科学有效的提出老旧小区交通环境更新与改善措施,对城市老旧居住小区交通环境进行了调查,明确了老旧居住小区存在的突出交通问题,并提出了城市老旧居住小区交通环境评价的指标体系,包括行人跨路出行指数、无人行道路段长度占比、停车泊位供需比、路内非法停车占比、平均停车步行距离、泊位数量户数比、人均步行空间、无障碍通道、盲道设置比例、非机动车泊位供需比、地面停放车辆数小区面积比、外部穿行交通周转量小区面积比等。并给出了具体指标的计算方法与获得办法。以长沙市四个典型老旧居住小区为例,对评价方法进行了论证,并得到城市老旧居住小区存在的一般问题,包括人车混杂、人车交织现象严重,停车泊位短缺、车辆乱停乱放,交通设施、特别是弱势群体交通设施缺乏。给出的评价指标、评价方法与结论可为城市老旧小区改造更新,特别是其中很重要的交通环境更新提供决策依据。     

Rolling-ball method for estimating the boundary of the support of a point-process intensity

We suggest a generalisation of the convex-hull method, or ‘DEA’ approach, for estimating the boundary or frontier of the support of a point cloud. Figuratively, our method involves rolling a ball around the cloud, and using the equilibrium positions of the ball to define an estimator of the envelope of the point cloud. Constructively, we use these ideas to remove lines from a triangulation of the points, and thereby compute a generalised form of a convex hull. The radius of the ball acts as a smoothing parameter, with the convex-hull estimator being obtained by taking the radius to be infinite. Unlike the convex-hull approach, however, our method applies to quite general frontiers, which may be neither convex nor concave. It brings to these contexts the attractive features of the convex hull: simplicity of concept, rotation-invariance, and ready extension to higher dimensions. It admits bias corrections, which we describe and illustrate through implementation.     

Analysis of the Stress State of the Surface Layer of a Polymeric Mass upon Filling of Bulky Compression Molds

The stress state of the surface layer of a polymeric mass during filling of bulky compression molds is analyzed. It is shown that, at particular rheological characteristics of the mass, temperature, and filling rates, cracking of the surface layer occurs, which leads to defects in the finished products. A physical analysis of this process makes it possible to conclude that the cracks arise due to the normal stresses operating in the front region of the moving polymeric mass. It is found that, under certain flow conditions, areas with a pressure lower than the atmospheric one appear on the surface of the polymer. If the tensile stresses arising in these local regions are higher than the tensile strength of the mass, the continuity of the composition is broken in the direction determined by the greatest rate of the normal deformation. To confirm the reliability of the crack-formation mechanism proposed, the distribution of the pressure and normal stresses over the free surface is calculated based on a numerical method. These calculations show that, by comparing the stress level achieved in the front region with the tensile-strength characteristics of the polymeric composition, it is possible to predict, with a sufficient accuracy, the possibility of crack formation in the surface layer of such a mass under given flow conditions and thus to solve the question on flawless manufacturing of products.     

Gaussian Versus Optimal Integration of Analytic Functions

We consider error estimates for optimal and Gaussian quadrature formulas if the integrand is analytic and bounded in a certain complex region. First, a simple technique for the derivation of lower bounds for the optimal error constants is presented. This method is applied to Szeg?-type weight functions and ellipses as regions of analyticity. In this situation, the error constants for the Gaussian formulas are close to the obtained lower bounds, which proves the quality of the Gaussian formulas and also of the lower bounds. In the sequel, different regions of analyticity are investigated. It turns out that almost exclusively for ellipses, the Gaussian formulas are near-optimal. For classes of simply connected regions of analyticity, which are additionally symmetric to the real axis, the asymptotic of the worst ratio between the error constants of the Gaussian formulas and the optimal error constants is calculated. As a by-product, we prove explicit lower bounds for the Christoffel-function for the constant weight function and arguments outside the interval of integration. September 7, 1995. Date revised: October 25, 1996.     

Quality rating of a metal matrix-diamondcomposite from its thermal conductivity and electric resistance

The efficiency of hot-pressed diamond-containing composite materials (DCM) for various tool applications is greatly affected by microdefects, namely, the residual porosity of the metal matrix, damaged diamond grains, and imperfect diamond-matrix interfaces. An instrumental evaluation of these microdefects, predetermining the quality of a tool equipped with DCM, is rather difficult due to the small size, the nonstandard shape, and the strong heterogeneity of specimens. Proposed here is an alternative, nondestructive technique of DCM quality rating, which includes the measurement of electric resistance and thermal conductivity of diamond-containing composites and processing the obtained data by the methods of composite mechanics. It exploits the fact that diamond, being a dielectric, possesses an extremely high thermal conductivity, which allows estimating the residual porosity of a sintered metal matrix from the ratio of specific electric resistances, one being measured and another predicted by a theory. These data, in turn, are utilized to predict the thermal conductivity ofDCMwith an imperfect matrix. Matching with experiments, after solving the inverse problem gives the thermal resistance of diamond-matrix interface, which, within the frame work of the given model, simulates the damage of both the diamond grains and their bonds with the matrix. Thus, the numerical rating of quality is given in terms of two dimensionless parameters. The first one, 0 < K < 1, reflects the quality of the sintered metal matrix, whereas the second one, 0 < R <1, is an aggregate measure of the integrity of diamond grains and the perfection degree of composite interfaces. The quite satisfactory agreement observed between the theory and experiment confirms the efficiency of the technique and the reliability of the data obtained. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 361–374, May–June, 2006.     

Calculation of damage and of force relaxation in amorpho-crystalline polymers

The dynamics of damage and of the relaxing force in amorpho-crystalline polymers under constant strain are calculated using the formulas for the probability of rupture of a deformed polymer molecule and a model representation of amorphous interlayers. The main parameters of the model are the maximum and minimum possible deformations of molecular chains, the energy of rupture activation, the function of the chain length distribution, the temperature, the macroscopic strain, and the relative dimensions of the amorphous interlayer. The conformity of the theoretical model and the association of the relaxation spectrum with the internal molecular and structural characteristics of the material are established.Zhambyl Technical Institute of Light and Food Industry, Taraz, Kazakhstan. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 4, pp. 499–508, July–August, 1999.     

Development of the Tangent Modulus from the Euler-Problem to Nonsmooth Materials

History and development of the tangent modulus from the origins to the recent nonsmooth damaging versions are presented. Load history and stability analyses of structures of nonlinear reversible or irreversible materials are based on the concept of tangent modulus. Generally, instantaneously changing tangent modulus is needed and the solution yields iteration process. In the case of inelastic problems, the switch from loading to unloading of the material behaviour results in nonsmooth material functions. Nonsmooth, generally saw-tooth like behaviour happens in composite, laminated or rock type materials, or in the interaction of concrete and the reinforcement, too. Recently, damage and localization are in the focus of structural analyses, extending the tangent modulus to the negative cases, as well. Consequently, an overview of the history and development of the tangent modulus containing the recent modifications seems to be necessary. On the other hand, the more than a century long history of the tangent modulus is a marvellous study of the parallel development of mechanics and mathematics, by following the mutual inspiring effect of them through the activity of such pioneers like P.D. Panagiotopoulos in creating Nonsmooth Mechanics.     

The limiting state of a rigidly fixed nonlinearly elastic multilayer rod

The loss of the load-carrying capacity of a nonlinearly elastic multilayer rod is investigated. The rod, whose layers have various thickness and are made of different materials, is rigidly fixed at both its ends. Rigid contact conditions between the layers are assumed. The problem posed is solved by using the variational method of mixed type in combination with the Rayleigh-Ritz method. The initial analysis is reduced to the solution of the Cauchy problem for a nonlinear ordinary differential equation solved for the first derivative. As the initial condition, the maximum initial eccentricity of the rod is assumed. In the case of zero eccentricity, the Shanley critical force for an axially compressed rod is determined. For a three-layer rod whose outer layers have equal thickness and are made of the same material, numerically, for various degrees of nonlinearity, the effect of physicomechanical and geometric parameters on the critical load of buckling instability is determined. It is found that, by matching the heterogeneity of the rod, it is possible to raise its load-carrying capacity. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 347–360, May–June, 2006.     

Some curious properties and loci problems associated with cubics and other polynomials

The article begins with a well-known property regarding tangent lines to a cubic polynomial that has distinct, real zeros. We were then able to generalize this property to any polynomial with distinct, real zeros. We also considered a certain family of cubics with two fixed zeros and one variable zero, and explored the loci of centroids of triangles associated with the family. Some fascinating connections were observed between the original family of the cubics and the loci of the centroids of these triangles. For example, we were able to prove that the locus of the centroid of certain triangles associated with the family of cubics is another cubic whose zeros are in arithmetic progression. Motivated by this, in the last section of the article, we considered families of cubic polynomials whose zeros are in arithmetic progression, along with the loci of the special points of certain triangles arising from such families. Special points include the centroid, circumcentre, orthocentre, and nine-point centre of the triangles. Throughout the article, we used the computer algebra system, Mathematica®, to form conjectures and facilitate calculations. Mathematica® was also used to create various animations to explore and illustrate many of the results.