Field determination of rhenium in plants using catalytic test methods with dimethyldithiooxamide and Sulfonitrazo P

Methods for the field determination of rhenium in plants have been developed. The speciation of rhenium in solutions throughout the process of sample preparation has been investigated. It has been shown that, in the initial ethanol and water-salt extracts, rhenium occurs as perrhenate ions. Perrhenate ions have been established to be partially reduced in time to give Re(VI). Since test methods have been developed for determining rhenium as perrhenate-ions, their partial reduction in the process of sample preparation can lead to an low level of the results. The optimal conditions for preserving rhenium as perrhenate ions have been determined. Two procedures (in four versions) providing the determination of as low as 5 ng of rhenium in a 1-g sample with an error below 23% have been proposed. The developed procedures have been applied in the places of the collection of plant materials for the regional investigation of the occurrence of rhenium in the territories of different ore contents.     

Large N‐Heteroacenes: New Tricks for Very Old Dogs?

Azaacenes have been known for a very long time, either as N,N′‐dihydro compounds or in their oxidized form as 4 n+2π systems, but only recently have processable and charcterizable derivatives been sought. In the last three years synthetic routes to large N‐heteroacenes have been developed. In particular, the Pd‐catalyzed coupling of aromatic diamines with activated aromatic dihalogenides has enabled simple access to numerous new azaacenes. Since 2010, azapentacene and stabile oligoazahexacene have been synthesized, as well as a symmetrical tetraazapentacene, which acts as an excellent electron‐transport material for thin‐film transistors.     

Infrared and Raman spectra of 8-azaguanine and 8-azaadenine

The IR and Raman spectra of 8-azaguanine and 8-azaadenine have been studied. The spectra of 8AG have been critically examined and compared with those of guanine and 9-methylguanine. Similarly, the spectra of 8-azaadenine have been examined and compared with those of adenine and 9-methyladenine. It has been possible to refute or accept the assignments for certain frequencies proposed earlier in the parent molecules by other workers, and thus almost unambiguous assignments for several frequencies in guanine and adenine as well as in 8AG and 8AA have been obtained. Several frequencies have been explained as combinations involving a 130 cm⁻¹ vibration which has been assigned to the ring-folding mode. It is found that not as many combination bands involving this mode occur in 8AA as those in 8AG. These observations indicate that guanine and 8AG are geometrically more flexible than adenine and 8AA.     

Guanidine methacrylate and methacryloyl guanidine hydrochloride: Synthesis and polymerization

New methods for the preparation of guanidine methacrylate, methacryloyl guanidine, and its hydrochloride have been proposed, and the physicochemical characteristics of the products have been studied. A number of kinetic parameters of the radical polymerization of these monomers have been determined (the rate and the rate constant in the initial section as well as the order of the reaction rate with respect to the concentration of the initiator for methacryloyl guanidine hydrochloride). It has been found that the classical general rules are followed: The conversion increases with an increase in temperature, while the characteristic viscosity decreases. The main NMR spectroscopic parameters of polymethacryloyl guanidine hydrochloride have been determined. According to preliminary biological tests, polymers have sufficiently high bactericidal activity and can be used as stand-alone biocidal preparations or as functional additives in composite materials.     

Novel analytical methods for characterising binding media and protective coatings in artworks

Since the first reported analytical studies and technical examinations of art and archaeological objects conducted in the late 18th century, analytical techniques and methods applied to the study of artworks have constantly grown. Among the materials composing the art object, organic compounds used as binding media or protective coatings have attracted the attention of the conservation profession given their noticeable ability for undergoing morphological and chemical changes on ageing. Thus, the aim of this paper is to review the most recent advances in the identification and determination of organic compounds present in art and art conservation materials. Immunofluorescence techniques have been proposed in recent decades as an alternative to the classical and simpler microchemical tests. Besides, a variety of instrumental techniques have also been improved in an attempt to enhance the sensitivity, repeatability and accuracy of the analytical results. Spectroscopic techniques, such as UV-vis, FTIR and Raman spectroscopy, have been coupled with light microscopes for these purposes. Synchrotron radiation FTIR microspectroscopy has also been successfully applied to the analysis of artworks. Mass spectrometry has also been increasingly used as a detector system coupled with a chromatographic device. Chromatographic methods have also improved in recent years. Paper and thin layer chromatographic techniques have been progressively replaced with gas chromatography (GC), pyrolysis-GC, high performance liquid chromatography and capillary electrophoresis. More complex proteomics hyphenated techniques, such as nano-liquid chromatography-nano-electrospray ionisation/collision quadrupole time-of-flight tandem mass spectrometry, have been recently applied to the identification and determination of proteinaceous binders. Microbeam analytical techniques have also been incorporated into the list of advanced instrumental techniques for art conservation purposes. Finally, a number of new instrumental techniques have been proposed as a suitable alternative to the conventional microscopy techniques for morphological studies.     

Magnetism and microfluidics

Magnetic forces are now being utilised in an amazing variety of microfluidic applications. Magnetohydrodynamic flow has been applied to the pumping of fluids through microchannels. Magnetic materials such as ferrofluids or magnetically doped PDMS have been used as valves. Magnetic microparticles have been employed for mixing of fluid streams. Magnetic particles have also been used as solid supports for bioreactions in microchannels. Trapping and transport of single cells are being investigated and recently, advances have been made towards the detection of magnetic material on-chip. The aim of this review is to introduce and discuss the various developments within the field of magnetism and microfluidics.     

Competition between Bailar and Ray-Dutt paths in conformational interconversion of tris-chelated complexes: a DFT study

Tris-chelated complexes of aluminum with α-isopropenyltropolonate and α-isopropyltropolonate ligands can be considered prototypical complexes for the study of internal rearrangements through prismatic transient structures. Such isomerization paths, known as Bailar and Ray-Dutt twists, have been suggested for these compounds on the basis of dynamic NMR study, but modern computational methodologies have never been applied to corroborate this finding. In this paper, we report a computational investigation about the internal isomerization processes of the mentioned complexes. Both the Bailar and Ray-Dutt twists have been found as possible reaction paths. The prismatic structures along each reaction path have been described as transition structures rather than intermediate and have been computationally characterized. A comparison between experimental and computational kinetic data has been performed.     

(Re-)crystallization mechanism of highly oriented Si-microwire arrays by TEM analysis

Novel anodes for Li-ion batteries have been characterized by transmission electron microscopy (TEM). The anodes consist of arrays of ordered silicon microwires obtained from conventional silicon wafers by controlled etching processes. Suitable preparation methods for wires in the micrometer range have been tested, optimized, and subsequently applied. Ex situ TEM measurements have been performed for pristine as well as for electrochemically cycled wires that have been charged and discharged for several times. The influences of cycling rate, an electrolyte additive, as well as elevated temperatures on the anodes’ stability have been investigated.     

Short peptides as biosensor transducers

This review deals with short peptides (up to 50 amino acids) as biomimetic active recognition elements in sensing systems. Peptide-based sensors have been developed in recent years according to different strategies. Synthetic peptides have been designed on the basis of known interactions between single or a few amino acids and targets, with attention being paid to the presence of peptide motifs known to allow intermolecular self-organization of the sensing peptides over the sensor surface. Sensitive and sophisticated sensors have been obtained in this way, but the use of designed peptides is limited by severe difficulties in their in silico design. Short peptides from random phage display have been selected in a random way from large, unfocussed, and often preexisting and commercially available phage display libraries, with no design elements. Such peptides often perform better than antibodies, but they are difficult to select when the target is a small molecule because of the need to immobilize it with considerable modifications of its structure. Artificial, miniaturized receptors have been obtained from the reduction of the known sequence of a natural receptor down to a synthesizable and yet stable one. Alternatively, binding sites have been created over a designed, stable peptide scaffold. Short peptides have also been used as active elements for the detection of their own natural receptors: pathogenic bacteria have been detected with antimicrobial and cell-penetrating peptides, but key challenges such as detection of bacteria in real samples, improved sensitivity, and improved selectivity have to be faced. Peptide substrates have been conjugated to fluorescent quantum dots to obtain disposable sensors for protease activity with high sensitivity. Ferrocene–peptide conjugates have been used for electrochemical sensing of protease activity.     

Preparation and characterization of water-in-oil decane/AOT microemulsions containing silver and gold nanoparticles and large amounts of water

Stable microemulsions with water contents as high as 10 vol % have been obtained, including those additionally containing silver and gold nanoparticles. Especial attention has been focused on the influence of water and stabilizer contents on the structure of adsorption layers on nanoparticles. The properties of nanoparticles obtained via the traditional microemulsion synthesis have been compared with the properties of nanoparticles that have preliminarily been concentrated with the help of electrophoresis and dried. The electrophoretic concentration and drying of nanoparticles have been shown to improve the stability of their microemulsions. Microemulsions with the highest content of water have been studied to determine the occurrence of percolation and the influence of nanoparticles on their percolation temperature and electrical conductivity.     

Use of p-Cresotic acid and its various derivatives for the estimation of thorium and zirconium

Summary p-Cresotic acid and its nitro, bromo, sulfo, acetyl, benzoyl and hydrazine derivatives and 5-methyl salicylic-o-aeetic acid have been used for the estimation of thorium and zirconium. The precipitates obtained have in all cases been ignited and weighed as oxides. These reagents have been found under suitable experimental conditions to effect the separation of Th as well as Zr from cerite earths.     

Conformation-activity relationships in polyketide natural products. Towards the biologically active conformation of epothilone

The conformation-activity relationships for the biologically active polyketide, epothilone, have been determined. Computer-based molecular modeling and high field NMR techniques have provided the solution preferences for epothilones and. For the C1-C8 polypropionate region, two conformational families, conformers 1 and 2, have been identified as having significant populations in polar and non-polar solvents. In the C11-C15 region, additional flexibility was observed and two local conformations have been identified as important, conformers 3 and 4. Epothilone analogues with altered conformational profiles have been designed and synthesized. Conformational analysis and the results of biological assays have been correlated to provide increased understanding of the biologically active conformation for the epothilone class of natural product. Conformation-activity relationships have been shown to be an important complement to structure-activity data.     

New propranolol analogues: binding and chiral discrimination by cellobiohydrolase Cel7A

Novel propranolol analogues have been designed and synthesised and their enantioselective binding to the cellulose degrading enzyme, Cel7A, has been evaluated. Affinity and enantioselectivity have been determined by capillary electrophoresis experiments. Ligands with significantly improved affinity and selectivity have been obtained and an analysis of the results has led to insights concerning the relation between the changes in ligand structure and selectivity as well as affinity to the protein.     

Sulfonamide carbazole receptors for anion recognition

Carbazole-based receptors functionalized with two sulfonamide groups have been synthesized and their properties as anion receptors have been evaluated. The receptor with bis(trifluoromethyl)aniline groups has shown a very high affinity for halide ions, especially remarkable as only two hydrogen bonds are formed in the complexes. (1)H NMR and fluorescence titrations have been carried out and binding constants up to 7.9 × 10(6) M(-1) have been reached. X-ray structures have been obtained and a modelling study has shown the possible reasons for the large affinity of these compounds for halide anions.     

Characterization of in vitro metabolic profiles of cinitapride obtained with liver microsomes of humans and various mammal species using UHPLC and chemometric methods for data analysis

An ultra-high performance liquid chromatographic method has been utilized to obtain metabolic profiles of cinitapride with liver microsomes of humans and various mammal species such as rats, mice, mini pigs, dogs, and monkeys. Metabolites have been generated by incubation of cinitapride in the presence of microsomes using nicotinamide adenine dinucleotide phosphate as a cofactor. Incubation times from 15 to 60 min have been assayed. Cinitapride and its metabolites have been separated by reversed-phase C₁₈ mode using ammonium formate aqueous solution (pH 6.5) and acetonitrile as the components of the mobile phase. Concentrations of metabolites in the incubated samples have resulted in an excellent source of multivariate data to be used to extract metabolic information. Statistic parameters and principal component analysis have been used to compare the in vitro metabolism of humans with the other species.     

Precision in 14 MeV neutron activation analysis

The errors of analysis due to the different parameters involved in 14 MeV neutron activation analysis method are studied. Formulae to calculate these erros have been developed when possible. Otherwise they have been evaluated for special experimental situations. Special cases where some parameters become critical, as far as precision is concerned, have been mentioned.     

Frequency-modulated simultaneous multielement atomic absorption spectrometry using electrothermal atomizer and deuterium background correction

Characteristic data of the frequency-modulated simultaneous multielement atomic absorption spectrometry (FREMSAAS) using electrothermal atomizer with deuterium background correction, have been determined. The data obtained have been processed by using several statistical tests recommended for quality control purposes. The instrumentation has been presented as well as procedures of separating elements into measure groups and fixing of variable conditions. Detection limits, characteristic masses and working ranges have been given for the eleven elements examined. The data have been in good agreement to results obtained with conventional one-channel AAS instruments. The eleven elements have been simultaneously determined in a standard reference material (SRM) and all results are compatible with a 95% certainty with the certified values. FREMSAAS has been applied to a real sample.Dedicated to Professor Dr. Dieter-Klockow on the occasion of his 60th birthday     

Curing of an epoxy resin modified with poly(methylmethacrylate) monitored by simultaneous dielectric/near infrared spectroscopies

Simultaneous dielectric and near infrared measurements have been performed in “real-time” to follow polymerisation reactions on blends of a diglycidyl ether of bisphenol-A epoxy resin with 4,4^′-diaminodiphenylmethane hardener and different amounts of poly(methylmethacrylate) as modifier. The effect of the modifier amount on the polymerisation reactions has been studied, as well as that of the curing temperature. Epoxy and amine conversions have been followed by near infrared spectroscopy (NIR), while changes in molecular mobility in the reaction mixture have been analysed by dielectric relaxation spectroscopy (DRS). Evolutions of ionic conductivity and α-relaxation have been analysed and vitrification times have been obtained. The relaxational behaviour has been analysed through curing in the frequency domain, being the change of the main relaxation indicative of the cure reaction advancement. DRS data are also presented as complex impedance Z(ω). Vitrification times, obtained by dielectrometry have been compared with those obtained by rheological measurements and gelation times obtained by NIR have been compared with those obtained by solvent extraction.     

Pyrene‐fused Acenes and Azaacenes: Synthesis and Applications

In this account, the synthesis and applications of pyrene‐fused acenes, as well as pyrene‐fused azaacenes, have been carefully reviewed. Moreover, the synthetic methods involving two key synthons (different lengths of dienes and ynes) have been included. Furthermore, the “clean reaction” strategy has been introduced for the preparation of pyrene‐fused acenes with a single terminal‐pyrene unit from tetracene to octacene, as well as for the synthesis of pyrene‐fused octatwistacenes and nonatwistacenes with double terminal‐pyrene units. Similarly, the synthons and the synthetic methods for pyrene‐fused azaacenes have also been summarized. The applications of pyrene‐fused acenes and pyrene‐fused azaacenes have been included.