Dialkoxyphosphinyl-substituted enols of carboxamides

Reactions of isocyanates XNCO (e.g., X = p-An, Ph, i-Pr) with (MeO)2P(=O)CH2CO2R [R = Me, CF3CH2, (CF3)2CH] gave 15 formal "amides" (MeO)2P(=O)CH(CO2R)CONHX (6/7), and with (CF3CH2O)2P(=O)CH2CO2R [R = Me, CF3CH2] they gave eight analogous amide/enols 17/18. X-ray crystallography of two 6/7, R = (CF3)2CH systems revealed Z-enols of amides structures (MeO)2P(=O)C(CO2CH(CF3)2)=C(OH)NHX 7 where the OH is cis and hydrogen bonded to the O=P(OMe)2 group. The solid phosphonates with R = Me, CF3CH2 have the amide 6 structure. The structures in solution were investigated by 1H, 13C, 19F, and 31P NMR spectra. They depend strongly on the substituent R and the solvent and slightly on the N-substituent X. All systems displayed signals for the amide and the E- and Z-isomers. The low-field two delta(OH) and two delta(NH) values served as a probe for the stereochemistry of the enols. The lower field delta(OH) is not always that for the more abundant enol. The % enol, presented as K(enol), was determined by 1H, 19F, and 31P NMR spectra, increases according to the order for R, Me < CF3CH2 < (CF3)2CH, and decreases according to the order of solvents, CCl4 > CDCl3 approximately THF-d8 > CD3CN >DMSO-d6. In DMSO-d6, the product is mostly only the amide, but a few enols with fluorinated ester groups were observed. The Z-isomers are more stable for all the enols 7 with E/Z ratios of 0.31-0.75, 0.15-0.33, and 0.047-0.16 when R = Me, CF3CH2, and (CF3)2CH, respectively, and for compounds 18, R = Me, whereas the E-isomers are more stable than the Z-isomers. Comparison with systems where the O=P(OMe)2 is replaced by a CO2R shows mostly higher K(enol) values for the O=P(OMe)2-substituted systems. A linear correlation exists between delta(OH)[Z-enols] activated by two ester groups and delta(OH)[E-enols] activated by phosphonate and ester groups. Compounds (MeO)2P(=O)CH(CN)CONHX show 相似文献   

Enols of amides. The effect of fluorine substituents in the ester groups of dicarboalkoxyanilidomethanes on the enol/amide and E-enol/Z-enol ratios. A multinuclei NMR study.

Condensation of phenyl isocyanate substituted by 4-MeO, 4-Me, 4-H, 4-Br, and 2,4-(MeO)(2) with esters CH(2)(CO(2)R)CO(2)R', R = CH(2)CF(3), R' = CH(3), CH(2)CF(3), CH(CF(3))(2), or R = CH(3), R' = CH(CF(3))(2) gave 17 "amides" ArNHCOCH(CO(2)R)CO(2)R' containing three, six, or nine fluorines in the ester groups. X-ray crystallography of six of them revealed that compounds with > or =6 fluorine atoms exist in the solid state as the enols of amides ArNHC(OH)=C(CO(2)R)CO(2)R' whereas the ester with R = R' = CH(3) was shown previously to have the amide structure. In the solid enols, the OH is cis and hydrogen bonded to the better electron-donating (i.e., with fewer fluorine atoms) ester group. X-ray diffraction could not be obtained for compounds with only three fluorine atoms, i.e., R = CH(2)CF(3), R' = CH(3) but the (13)C CP-MAS spectra indicate that they have the amide structure in the solid state, whereas esters with six and nine fluorine atoms display spectra assigned to the enols. The solid enols show unsymmetrical hydrogen bonds and the expected features of push-pull alkenes, e.g., long C(alpha)=C(beta) bonds. The structure in solution depends on the number of fluorine atoms and the solvent, but only slightly on the substituents. The symmetrical systems (R = R' = CH(2)CF(3)) show signals for the amide and the enol, but all systems with R not equal R' displayed signals for the amide and for two enols, presumably the E- and Z-isomers. The [Enol I]/[Enol II] ratio is 1.6-2.9 when R = CH(2)CF(3), R' = CH(3), CH(CF(3))(2) and 4.5-5.3 when R = CH(3), R' = CH(CF(3))(2). The most abundant enol display a lower field delta(OH) and a higher field delta(NH) and assigned the E-structure with a stronger O-H.O=C(OR) hydrogen bond than in the Z-isomer. delta(OH) and delta(NH) values are nearly the same for all systems with the same cis CO(2)R group. The [Enols]/[Amide] ratio in various solvents follows the order CCl(4) > CDCl(3) > CD(3)CN > DMSO-d(6). The enols always predominate in CCl(4) and the amide is the exclusive isomer in DMSO-d(6) and the major one in CD(3)CN. In CDCl(3) the major tautomer depends on the number of fluorines. For example, in CDCl(3,) for Ar = Ph, the % enol (K(Enol)) is 35% (0.54) for R = CH(2)CF(3,) R' = CH(3), 87% (6.7) for R = R' = CH(2)CF(3), 79% (3.8) for R = CH(3), R' = CH(CF(3))(2) and 100% (> or =50) for R = CH(2)CF(3), R' = CH(CF(3))(2). (17)O and (15)N NMR spectra measured for nine of the enols are consistent with the suggested assignments. The data indicate the importance of electron withdrawal at C(beta), of intramolecular hydrogen bonding, and of low polarity solvents in stabilizing the enols. The enols of amides should no longer be regarded as esoteric species.     

Gas-phase acidities of disubstituted methanes and of enols of carboxamides substituted by electron-withdrawing groups

The gas-phase acidities DeltaG degrees (acid) of some 20 amides/enols of amides RNHCOCHYY'/RNHC(OH)=CYY' [R = Ph, i-Pr; Y, Y' = CO(2)R', CO(2)R' ', or CN, CO(2)R', R', R' ' = Me, CH(2)CF(3), CH(CF(3))(2)], the N-Ph and N-Pr-i amides of Meldrum's acid, 1,3-cyclopentanedione, dimedone, and 1,3-indanedione, and some N-p-BrC(6)H(4) derivatives and of nine CH(2)YY' (Y, Y' = CN, CO(2)R', CO(2)R' '), including the cyclic carbon acids listed above, were determined by ICR. The acidities were calculated at the B3LYP/6-31+G//B3LYP/6-31+G level for both the enol and the amide species or for the carbon acid and the enol on the CO in the CH(2)YY' series. For 12 of the compounds, calculations were also conducted with the larger base sets 6-311+G and G-311+G. The DeltaG degrees (acid) values changed from 341.3 kcal/mol for CH(2)(CO(2)Me)(2) to 301.0 kcal/mol for PhNHC(OH)=C(CN)CH(CF(3))(2). The acidities increased for combinations of Y and Y' based on the order CO(2)Me < CO(2)CH(2)CF(3) < CN, CO(2)CH(CF(3))(2) for a single group and reflect the increased electron-withdrawal ability of Y,Y' coupled with the ability to achieve planarity of the crowded anion. The acidities of corresponding YY'-substituted systems follow the order N-Ph enols > N-Pr-i enols > CH(2)YY'. Better linear relationships between DeltaG degrees (acid) values calculated for the enols and the observed values than those for the values calculated for the amides suggest that the ionization site is the enolic O-H of most of the noncyclic trisubstituted methanes. The experimental DeltaG degrees (acid) value for Meldrum's acid matches the recently reported calculated value. The calculated structures and natural charges of all species are given, and the changes occurring in them on ionization are discussed. Correlations between the DeltaG degrees (acid) values and the pK(enol) values, which are linear for the trisubstituted methanes, excluding YY' = (CN)(2) and nonlinear for the CH(2)YY' systems, are discussed.     

Enols of amides activated by the 2,2,2-trichloroethoxycarbonyl group

Reaction of isocyanates XNCO (X = Ar, i-Pr, t-Bu) with CH(2)(Y)CO(2)CH(2)CCl(3) (Y = CO(2)Me, CO(2)CH(2)CCl(3), CN) gave 15 amides XNHCOCH(Y)CO(2)CH(2)CCl(3) (6) or enols of amides XNHC(OH)=C(Y)CO(2)CH(2)CCl(3) (5) systems. The amide/enol ratios in solution depend strongly on the substituent Y and the solvent and mildly on the substituent X. The percentage of enol for group Y increases according to Y = CN > CO(2)CH(2)CCl(3) > CO(2)Me and decreases with the solvent according to CCl(4) > C(6)D(6) > CDCl(3) > THF-d(8) > CD(3)CN > DMSO-d(6). With the most acidic systems (Y = CN) amide/enol exchange is observed in moderately polar solvents and ionization to the conjugate base is observed in DMSO-d(6). The solid-state structure of the compound with Y = CN, X = i-Pr was found to be that of the enol. The reasons for the stability of the enols were discussed in terms of polar and resonance effects. Intramolecular hydrogen bonds result in a very low delta(OH) and contribute to the stability of the enols and are responsible for the higher percentage of the E-isomers when Y = CO(2)Me and the Z-isomers when Y = CN. The differences in delta(OH), delta(NH), K(enol), and E/Z enol ratios from the analogues with CF(3) instead of CCl(3) are discussed.     

Reactions of enols of amides with diazomethane

The reaction of 10 carboxamides activated by two beta-electron-withdrawing groups, which mostly exist completely or partially in their enol forms, with diazomethane was investigated. The main outcome is the diversity of reactions observed. With the most acidic enols 3-7, activated by at least one trifluoroethoxycarbonyl group or a cyano group, O-methylation or O,N-dimethylation takes place. With beta-dimethoxycarbonyl-activated systems 5 and 8, the C-methylation product of the amide form was one of the products. With a Meldrum's acid anilide enol 2, a cleavage took place leading to the C-alkylated imine having a CH(CO(2)Me)(2) group. Exchange of one 2,2,2-trifluoroethoxycarbonyl by a methoxycarbonyl in the C,N-dimethylation product of Me(2)CHNHC(OH)[double bond]C(CO(2)CH(2)CF(3))(2) 4 took place. The 2-anilido-1,3-cyclopentanedione 10 was methylated on a ring carbonyl while the enol of the 1,3-indanedione analogue 11 reacted with three diazomethane molecules and underwent a ring expansion and O-methylation to the 3-anilido-1,4-dimethoxynaphthalene. It is suggested that the reaction initiates by protonation of the diazomethane by the enol and an approximate qualitative relationship exists between the acidity of the enol and K(enol) and the regioselectivity of the reaction.     

Syntheses of highly unsaturated isocyanides via organometallic pathways

The carbon carbon coupling reaction by nucleophilic attack of (CO)(5)Cr(CN-CF=CF(2)) 1 by lithium or Grignard compounds 2a-i yields the isocyanide complexes (CO)(5)Cr(CN-CF=CF-R) 3a-i (a R = CH=CH(2), b R = CH=CF(2), c R = C≡CH, d R = C≡C-SiMe(3), e R = C≡C-Ph, f R = C≡C-C(6)F(4)OMe, g R = C≡C-C(6)H(3)(CF(3))(2), h R = C(6)F(5), i R = C(6)H(3)(CF(3))(2)) as mixtures of E and Z isomers. The dinuclear complexes 5a-c are obtained from the reaction of 1 with the dilithio or dimagnesium compound 4a-c as the Z,Z-, E,Z- and E,E-isomers, respectively. (CO)(5)Cr(CN-CF=CF-C≡C-C≡C-CF=CF-NC)Cr(CO)(5)7 is obtained as a mixture of Z,Z-, Z,E- and E,E-isomers from (CO)(5)Cr(CN-CF=CF-C≡C-H 3d by Eglington-Glaser coupling. (CO)(5)Cr(CN-CF=CF-C≡C-CF=CF-NC)Cr(CO)(5)6 and (CO)(5)Cr(CN-CF=CF-C=C-C≡C-CF=CF-NC)Cr(CO)(5)7 react with octacarbonyldicobalt forming the cluster compounds Z,Z-[{η(2)-μ(2)-(CO)(5)Cr(CN-CF=CF-C≡C-CF=CF-NC)Cr(CO)(5)}Co(2)(CO)(6)] Z,Z-8, E,Z-[{η(2)-μ(2)-(CO)(5)Cr(CN-CF=CF-C≡C-CF=CF-NC)Cr(CO)(5)}Co(2)(CO)(6)] E,Z-8 and E,E-[{η(2)-μ(2)-(CO)(5)Cr(CN-CF=CF-C≡C-CF=CF-NC)Cr(CO)(5)}Co(2)(CO)(6)] E,E-8 and Z,Z-[{η(2)-μ(2)-(CO)(5)Cr(CN-CF=CF-C≡C-C≡C-CF=CF-NC)Cr(CO)(5)}{Co(2)(CO)(6)}(2)] Z,Z-9, E,Z-[{η(2)-μ(2)-(CO)(5)Cr(CN-CF=CF-C≡C-C≡C-CF=CF-NC)Cr(CO)(5)}{Co(2)(CO)(6)}(2)] E,Z-9 and E,E-[{η(2)-μ(2)-(CO)(5)Cr(CN-CF=CF-C≡C-C≡C-CF=CF-NC)Cr(CO)(5)}{Co(2)(CO)(6)}(2)] Z,Z-9, respectively. The crystal and molecular structures of E-3d, Z-3h, Z,Z-8, E,Z-8 and Z,Z-9 were elucidated by single-crystal X-ray crystallography.     

Cyano-, nitro-, and alkoxycarbonyl-activated observable stable enols of carboxylic acid amides

A search for the enol structures of several amides YY'CHCONHPh with Y,Y' = electron-withdrawing groups (EWGs) was conducted. When Y = CN, Y' = CO(2)Me the solid structure is that of the enol (8b) MeO(2)CC(CN)=C(OH)NHPh, whereas in solution the NMR spectrum indicate the presence of both the amide MeO(2)CCH(CN)CONHPh (8a) and 8b. When Y = NO(2), Y' = CO(2)Et the main compound in CDCl(3) is the amide, but <10% of enol(s), presumably EtO(2)CC(NO(2))=C(OH)NHPh (9b), are also present. When Y = COEt, Y' = CO(2)Me or Y = COMe, Y' = CO(2)Et (10 and 11) enolization in solution and of 11 also in the solid state occurs at the carbonyl rather than at the ester site. With Y = Y' = CN a rapid exchange between the amide (NC)(2)CHCONHPh (12a) and a tautomer, presumably the enol, take place in several solvents on the NMR time scale. With YY' = barbituric acid moiety the species in DMSO-d(6) is an enol of an amide although which CONH group enolizes is unknown. B3LYP/6-31G calculations showed that the enol (NC)(2)C=C(OH)NH(2) (13b) is more stable by DeltaG of 0.4 kcal/mol than (NC)(2)CHCONH(2) (13a) due to a combination of stabilization of 13b and destabilization of 13a and both are much more stable than the hydroxyimine and ketene imine tautomers. The effect of Y,Y' and the solvent on the relative stabilization of enols of amides is discussed.     

Enols of substituted cyanomalonamides

Twenty open-chain mono-, di-, and trialkyl and aryl-N-substituted cyanomalonamides R2R1NCOCH(CN)CONHR3 were prepared. In solution, signals for both amide and a single enol are mostly observed, despite the potential for E and Z isomeric enols. The equilibrium (KEnol) values between the amides and the enols were determined in different solvents by NMR spectra. They decrease on increasing the polarity of the solvent in the order CDCl3 approximately C6D6>THF-d8>(CD3)2CO>CD3CN>DMF-d7>DMSO-d6. For the R1R2NCOCH(CN)CONHR3 system when R1=R2=H, Me or R1=H, R2=Me, KEnol for R3 follows the order: C6F5>Ph>or=An>or= i-Pr>or= t-Bu, and for R1, R2:H, H>Me, H>Me, Me in all solvents. A unique feature is the appreciable % enol in DMSO-d6 when R1=R2=H, in contrast with enol systems with other electron-withdrawing groups (EWGs). Calculations (B3LYP/6-31G**) corroborate the higher KEnol values for less alkyl-substituted systems, showing that in the most stable conformer when R1=H, R2=R3=Me the N-hydrogens are closer to the CN group. The order of promoting substituents for enol of amide formation is CONH2>CO2CH2CF3>CO2Me>CONHMe. The solid-state structures of the isolated species, determined by X-ray crystallography, were either amides or enols, and a higher KEnol(CDCl3) value does not ensure a solid enol structure. In no system were both solid species isolated. The X-ray structures of the enols were temperature-dependent. In most cases, the difference between the O-H and O...H bond lengths at low temperature were appreciable, but they become closer at the higher temperature. Similar tendency for either the C=C/C-C or the C-O/C=O bonds was observed. This is ascribed to a hydrogen shift between two regioisomeric enols in an asymmetric double-well potential, which becomes faster at a higher temperature. Calculations show that the enol structures are nonsymmetrical, resembling the lower temperature structures, even when they are chemically symmetrical, but the energy differences between the two regioisomers are <1 kcal. The hydrogen bonds in the enol moiety are strong, with O...O distances <2.45 A, and are resonance-assisted hydrogen bonds. IR spectra in solution and the solid state qualitatively corroborate the NMR and X-ray structure determination.     

Dehydration reaction of hydroxyl substituted alkenes and alkynes on the Ru(2)S(2) complex

A variety of inter- and intramolecular dehydration was found in the reactions of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1) with hydroxyl substituted alkenes and alkynes. Treatment of 1 with allyl alcohol gave a C(3)S(2) five-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CH(OCH(2)CH=CH(2))S]](CF(3)SO(3))(4) (2), via C-S bond formation after C-H bond activation and intermolecular dehydration. On the other hand, intramolecular dehydration was observed in the reaction of 1 with 3-buten-1-ol giving a C(4)S(2) six-membered ring complex, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2) [mu-SCH(2)CH=CHCH(2)S]](CF(3)SO(3))(4) (3). Complex 1 reacts with 2-propyn-1-ol or 2-butyn-1-ol to give homocoupling products, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCR=CHCH(OCH(2)C triple bond CR)S]](CF(3)SO(3))(4) (4: R = H, 5: R = CH(3)), via intermolecular dehydration. In the reaction with 2-propyn-1-ol, the intermediate complex having a hydroxyl group, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OH)S]](CF(3)SO(3))(4) (6), was isolated, which further reacted with 2-propyn-1-ol and 2-butyn-1-ol to give 4 and a cross-coupling product, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH=CHCH(OCH(2)C triple bond CCH(3))S]](CF(3)SO(3))(4) (7), respectively. The reaction of 1 with diols, (HO)CHRC triple bond CCHR(OH), gave furyl complexes, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SSC=CROCR=CH]](CF(3)SO(3))(3) (8: R = H, 9: R = CH(3)) via intramolecular elimination of a H(2)O molecule and a H(+). Even though (HO)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OH) does not have any propargylic C-H bond, it also reacts with 1 to give [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)C(=CH(2))C(=C=C(CH(3))(2))]S](CF(3)SO(3))(4) (10). In addition, the reaction of 1 with (CH(3)O)(H(3)C)(2)CC triple bond CC(CH(3))(2)(OCH(3)) gives [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(2)][mu-S=C(C(CH(3))(2)OCH(3))C=CC(CH(3))CH(2)S][Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)]](CF(3)SO(3))(4) (11), in which one molecule of CH(3)OH is eliminated, and the S-S bond is cleaved.     

Stable enols of carboxylic esters. The poly(methoxycarbonyl)cyclopentadiene systems

The structures of the poly(methoxycarbonyl)cyclopentadienes C(5)H(6)(-)(n)()(CO(2)Me)(n)(), n = 5 (Cp-5), n = 4 (Cp-4), n = 3 (1, 2,4-; Cp-3) and n = 2 (1,2-; 1,2-Cp-2-I) were investigated. The X-ray diffractions of Cp-5 (known), Cp-4, and Cp-3 showed an enol of ester structure in the solid state. The enolic hydrogen forms a symmetrical hydrogen bond to a neighboring ester carbonyl, so that the vicinal "enolic" CO(2)Me groups in the 1, 2-C(=CO(2)Me)-C(CO(2)Me)(4) moiety are identical. The relevant X-ray parameters for the three enols are similar. The CP-MAS spectra of Cp-3-Cp-5 generally resemble their (13)C NMR spectra in CDCl(3) except for some differences of mostly <1 ppm. The (1)H, (13)C, and (17)O NMR spectra of Cp-3-Cp-5 in CDCl(3) are consistent with those of the hydrogen bonded enols. Most characteristic are the (1)H and (17)O signals of the OH groups at 19.7-20.1 and 221-225 ppm, respectively. Proton addition to sodium 1, 2-bis(methoxycarbonyl)cyclopentadienide gave a mixture of four 1, 2-bis(methoxycarbonyl)cyclopentadienes. The isomer (1,2-Cp-2-I) formed in 10-20% displays delta(O(1)H) at 19.3 ppm and is the enol analogue of Cp-5 whereas its main isomer (30-55%) (1,2-Cp-2-IV) has the ester structure. In CD(3)CN and DMSO-d(6) only one signal was observed at room temperature for each type of H, C, or O of Cp-5, suggesting a complete ionization to the symmetrical anion of Cp-5. In contrast, Cp-4 and Cp-3 in CD(3)CN at room temperature display OH signals in both (1)H and (17)O NMR spectra, and Cp-5 shows a broad OH signal in the (1)H spectrum at 240 K. The enol of ester structure is the main species, although exchange with the corresponding anion is possible. On standing in DMF-d(7) at room temperature, new signals are observed for Cp-3 and Cp-4. On raising the temperature in Cl(2)CDCDCl(2), Cp-3-Cp-5 show line broadening and appearance of new signals. These were ascribed to rearrangment and decomposition processes.     

Facile allylic C-H bond activation on the bridging disulfide ligand in the Ru(III) dinuclear complex having a conjugated RuSSRu core

Treatment of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1), which is prepared by the reaction of [[RuCl(P(OCH(3))(3))(2)](2)(mu-S(2))(mu-Cl)(2)] (2) with 4 equiv of AgCF(3)SO(3), with terminal alkenes such as 1-pentene, allyl ethyl ether, allyl phenyl ether, 1,4-hexadiene, and 3-methyl-1-butene, resulted in the formation of complexes carrying a C(3)S(2) five-membered ring, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CR(1)R(2)S]](CF(3)SO(3))(4) (3, R(1) = CH(2)CH(3), R(2) = H, 40%; 4, R(1) = OCH(2)CH(3), R(2) = H, 60%; 5, R(1) = OC(6)H(5), R(2) = H, 73%; 6, R(1) = CH=CHCH(3), R(2) = H, 48%; 7, R(1) = R(2) = CH(3), 40%). Reaction of 1 with methylenecycloalkanes was found to give several different types of products, depending on the ring size of the substrates. A trace of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(CH(2)CH(2))CH(CH(3))S]](CF(3)SO(3))(4) (9) having a C(2)S(2) four-membered ring to bridge the two Ru atoms was obtained by the reaction of 1 with methylenecyclobutane, whereas the reaction with methylenecyclohexane gave [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-S(CH(2)(C=CHCH(2)CH(2)CH(2)CH(2))S)](CF(3)SO(3))(3) (10) in 69% yield via C-S bond formation and elimination of a proton. Throughout these reactions with alkenes giving a variety of products, the activation of the allylic C-H bond is always the essential and initial key step.     

P(RNCH(2)CH(2))(3)N-catalyzed 1,2-addition reactions of activated allylic synthons.

Activated allylic compounds of the type RCH:CHCH(2)Z (Z = CN, CO(2)Me) react efficiently with aromatic aldehydes in the presence of 20-40 mol % of P(R'NCH(2)CH(2))(3)N at -94 to -63 degrees C. Both R = H and R = Me lead exclusively to alpha-addition products. When R = H and Z = CN, an allylic transposition occurs to afford a Baylis-Hillman product as the only product.     

Preparation and characterization of the argentates: [Ag[P(CF(3))(2)](2)](-), [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-) (M = Cr, W), and [Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)](-): X-ray crystal structure of [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)

The first example of a mononuclear diphosphanidoargentate, bis[bis(trifluoromethyl)phosphanido]argentate, [Ag[P(CF(3))(2)](2)](-), is obtained via the reaction of HP(CF(3))(2) with [Ag(CN)(2)](-) and isolated as its [K(18-crown-6)] salt. When the cyclic phosphane (PCF(3))(4) is reacted with a slight excess of [K(18-crown-6)][Ag[P(CF(3))(2)](2)], selective insertion of one PCF(3) unit into each silver phosphorus bond is observed, which on the basis of NMR spectroscopic evidence suggests the [Ag[P(CF(3))P(CF(3))(2)](2)](-) ion. On treatment of the phosphane complexes [M(CO)(5)PH(CF(3))(2)] (M = Cr, W) with [K(18-crown-6)][Ag(CN)(2)], the analogous trinuclear argentates, [Ag[(micro-P(CF(3))(2))M(CO)(5)](2)](-), are formed. The chromium compound [K(18-crown-6)][Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)] crystallizes in a noncentrosymmetric space group Fdd2 (No. 43), a = 2970.2(6) pm, b = 1584.5(3) pm, c = 1787.0(4), V = 8.410(3) nm(3), Z = 8. The C(2) symmetric anion, [Ag[(micro-P(CF(3))(2))Cr(CO)(5)](2)](-), shows a nearly linear arrangement of the P-Ag-P unit. Although the bis(pentafluorophenyl)phosphanido compound [Ag[P(C(6)F(5))(2)](2)](-) has not been obtained so far, the synthesis of its trinuclear counterpart, [K(18-crown-6)][Ag[(micro-P(C(6)F(5))(2))W(CO)(5)](2)], was successful.     

Octahedral coordination of halide ions (I-, Br-, Cl-) sandwich bonded with tridentate mercuracarborand-3 receptors

The "anti-crown" B-hexamethyl 9-mercuracarborand-3 (1) was shown to complex halide ions (I-, Br-, Cl-) in an eta(3)-sandwich fashion. Symmetry-allowed interactions of the filled halide ion p-orbitals and the corresponding empty mercury p-orbitals result in three equivalent p(Hg)-p(halide)-p(Hg) three-center two-electron bonds and a sandwich structure. The molecular structures of [Li.(H(2)O)(4)][1(2).I].2CH(3)CN, MePPh(3)[1(2).Br].((CH(3))(2)CO)(2).(H(2)O)(2), and PPN[1(2).Cl] were determined by single-crystal X-ray diffraction studies. Compound [Li.(H(2)O)(4)][1(2).I].2CH(3)CN crystallized in the triclinic space group P-1, a = 13.312(8) A, b = 13.983(9) A, c = 13.996(9) A, alpha = 61.16(2) degrees, beta = 82.34(2) degrees, gamma = 86.58(2) degrees, V = 4365(2) A(3), Z = 1, R = 0.063, and R(w) = 0.171. Compound MePPh(3)[1(2).Br].((CH(3))(2)CO)(2).(H(2)O)(2) crystallized in the monoclinic space group C2/c, a = 24.671(8) A, b = 17.576(6) A, c = 26.079(8) A, beta = 106.424(6) degrees, V = 10847(6) A(3), Z = 8, R = 0.0607, and R(w) = 0.1506. Compound PPN[1(2).Cl] crystallized in the monoclinic space group C2/m, a = 37.27(2) A, b = 29.25(1) A, c = 10.990(4) A, beta = 100.659(7) degrees, V = 11774(8) A(3), Z = 4, R = 0.0911, and R(w) = 0.2369.     

Enols and thioenols of substituted cyanomonothiocarbonylmalonamides: structures, enolization vs. thioenolization, equilibria and conformations

Condensation of organic isothiocyanates with cyanoacetamides gave 24 N- and N'-substituted cyanomonothiocarbonylmalonamides in different tautomeric ratios i.e., amide-thioamides (TMA)R3NHCSCH(CN)CONR1R2 (12), thioamide-enols of amides (E) R3NHCSC(CN)=C(OH)NR1R2 (11)or amide-thioenols (TE) R3NHC(SH)=C(CN)CONR1R2 (13). The equilibrium constants (K(thioenol) =[TE]/[TMA] and K(enol) = [E]/[TMA]) in solution depend on R1, R2, R3 and the solvent. The %(E + TE)for NR1R2 increases in the order NMe2 < NHMe < NH2. The (K(thioenol) + K(enol)) in various solvents follows the order CCl4 > CDCl3 > C6D6 > THF-d8 > (CD3)2CO > CD3CN > DMF-d7 > DMSO-d6. The delta(OH) values are 16.46-17.43 and the delta(SH) values are 3.87-5.26 ppm in non polar solvents, e.g.,CDCl3 and 6.34-6.97 ppm in THF-d8 and CD3CN. An intramolecular O-H...O hydrogen bond leads to the preferred Z-configuration of the enols, and an N-H...O bond stabilizes the thioenols' preferred E-configuration with a non-bonded SH in solution. X-Ray crystallography revealed that systems with high %(E + TE) in solution mostly display the enols 11 in the solid state and systems with lower %(E +TE) in solution display structure 12. The differences in delta(OH), delta(NH), K(enol) and crystallographic data for analogous enol and thioenol systems are compared.     

Reactions of halofluorocarbons with group 6 complexes M(C(5)H(5))(2)L (M = Mo, W; L = C(2)H(4), CO). Fluoroalkylation at molybdenum and tungsten, and at cyclopentadienyl or ethylene ligands.

The molybdenum(II) and tungsten(II) complexes [MCp(2)L] (Cp = eta(5)-cyclopentadienyl; L = C(2)H(4), CO) react with perfluoroalkyl iodides to give a variety of products. The Mo(II) complex [MoCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide or perfluorobenzyl iodide with loss of ethylene to give the first examples of fluoroalkyl complexes of Mo(IV), MoCp(2)(CF(2)CF(2)CF(2)CF(3))I (8) and MoCp(2)(CF(2)C(6)F(5))I (9), one of which (8) has been crystallographically characterized. In contrast, the CO analogue [MoCp(2)(CO)] reacts with perfluorobenzyl iodide without loss of CO to give the crystallographically characterized salt, [MoCp(2)(CF(2)C(6)F(5))(CO)](+)I(-) (10), and the W(II) ethylene precursor [WCp(2)(C(2)H(4))] reacts with perfluorobenzyl iodide without loss of ethylene to afford the salt [WCp(2)(CF(2)C(6)F(5))(C(2)H(4))](+)I(-) (11). These observations demonstrate that the metal-carbon bond is formed first. In further contrast the tungsten precursor [WCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide, perfluoro-iso-propyl iodide, and pentafluorophenyl iodide to give fluoroalkyl- and fluorophenyl-substituted cyclopentadienyl complexes WCp(eta(5)-C(5)H(4)R(F))(H)I (12, R(F) = CF(2)CF(2)CF(2)CF(3); 15, R(F) = CF(CF(3))(2); 16, R(F) = C(6)F(5)); the Mo analogue MoCp(eta(5)-C(5)H(4)R(F))(H)I (14, R(F) = CF(CF(3))(2)) is obtained in similar fashion. The tungsten(IV) hydrido compounds react with iodoform to afford the corresponding diiodides WCp(eta(5)-C(5)H(4)R(F))I(2) (13, R(F) = CF(2)CF(2)CF(2)CF(3); 18, R(F) = CF(CF(3))(2); 19, R(F) = C(6)F(5)), two of which (13 and 19) have been crystallographically characterized. The carbonyl precursors [MCp(2)(CO)] each react with perfluoro-iso-propyl iodide without loss of CO, to afford the exo-fluoroalkylated cyclopentadiene M(II) complexes MCp(eta(4)-C(5)H(5)R(F))(CO)I (21, M = Mo; 22, M = W); the exo-stereochemistry for the fluoroalkyl group is confirmed by an X-ray structural study of 22. The ethylene analogues [MCp(2)(C(2)H(4))] react with perfluoro-tert-butyl iodide to yield the products MCp(2)[(CH(2)CH(2)C(CF(3))(3)]I (25, M = Mo; 26, M = W) resulting from fluoroalkylation at the ethylene ligand. Attempts to provide positive evidence for fluoroalkyl radicals as intermediates in reactions of primary and benzylic substrates were unsuccessful, but trapping experiments with CH(3)OD (to give R(F)D, not R(F)H) indicate that fluoroalkyl anions are the intermediates responsible for ring and ethylene fluoroalkylation in the reactions of secondary and tertiary fluoroalkyl substrates.     

The first solid enols of anhydrides. Structure, properties, and enol/anhydride equilibria(1)

Reaction of beta-methylglutaconic anhydride with NaOMe followed by reaction with methyl or phenyl chloroformate gave the corresponding O-methoxy (and O-phenoxy) carbonylation derivatives. Reaction of the anhydride with MgCl2/pyridine, followed by methyl chloroformate gave C-methoxycarbonylation at C3 of the anhydride. The product (4) was previously suggested by calculation to be the enol of the anhydride 5 and this is confirmed by X-ray crystallography (bond lengths: C-OH, 1.297 A; C1C2 1.388 A; HO...O=C(OMe) distance 2.479 A) making it the first solid enol of an anhydride. In CDCl3, CD3CN, or C6D6 solution it displays the OH as a broad signal at ca. 15 ppm, suggesting a hydrogen bond with the CO2Me group. NICS calculations indicate that 4 is nonaromatic. With D2O in CDCl3 both the OH and the C5H protons exchange rapidly the H for D. An isomeric anhydride 5a of 5 is formed in equilibrium with 4 in polar solvents. In solution, anhydride(s)/enol equilibria are rapidly established with Kenol of 6.40 (C6D6, 298 K), 0.52 (CD3CN, 298 K), 9.8 (CDCl3, 298 K), 22.8 (CDCl3, 240 K), and decreasing Kenol in CDCl3:CD3CN mixtures with the increase in percent of CD3CN. The percentage of the rearranged anhydride in CDCl3:(CD3)2CO increases with the increased percent of (CD3)2CO. In DMSO-d6 and DMF-d7 the observed species are mainly the conjugated base 4- and 5a. Deuterium effects on the delta(13C) values were determined. An analogous C2-OH enol of anhydride 15 substituted by 3-CO2Me and 4-OCO2Me groups was prepared. Its structure was confirmed by X-ray crystallography (CO bond length 1.298 A, O...O distance 2.513 A); delta(OH) = 12.04-13.22 ppm in CDCl3, THF-d8, and CD3CN, and Kenol = > or = 100, 7.7, and 3.4 respectively. In DMSO-d6 enol 15 ionizes to its conjugate base. Substantial upfield shifts of the apparent delta("OH") proton on diluting the enol solutions are ascribed to the interaction of the H+ formed with the traces of water in the solvent to give H3O+, which gives the alleged "OH proton" signal.     

Reaction of an osmium(VI) nitrido complex with cyanide: formation and reactivity of an osmium(III) hydrogen cyanamide complex

Reaction of [Os(VI)(N)(L(1))(Cl)(OH(2))] (1) with CN(-) under various conditions affords (PPh(4))[Os(VI)(N)(L(1))(CN)(Cl)] (2), (PPh(4))(2)[Os(VI)(N)(L(2))(CN)(2)] (3), and a novel hydrogen cyanamido complex, (PPh(4))(2)[Os(III){N(H)CN}(L(3))(CN)(3)] (4). Compound 4 reacts readily with both electrophiles and nucleophiles. Protonation and methylation of 4 produce (PPh(4))[Os(III)(NCNH(2))(L(3))(CN)(3)] (5) and (PPh(4))[Os(III)(NCNMe(2))(L(3))(CN)(3)] (6), respectively. Nucleophilic addition of NH(3), ethylamine, and diethylamine readily occur at the C atom of the hydrogen cyanamide ligand of 4 to produce osmium guanidine complexes with the general formula [Os(III){N(H)C(NH(2))NR(1)R(2)}(L(3))(CN)(3)](-) , which have been isolated as PPh(4) salts (R(1) = R(2) = H (7); R(1) = H, R(2) = CH(2)CH(3) (8); R(1) = R(2) = CH(2)CH(3) (9)). The molecular structures of 1-5 and 7 and 8 have been determined by X-ray crystallography.     

Direct Lanthanide-Transition Metal Interactions: Synthesis of (NH(3))(2)YbFe(CO)(4) and Crystal Structures of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity)

The heterometallic complex (NH(3))(2)YbFe(CO)(4) was prepared from the reduction of Fe(3)(CO)(12) by Yb in liquid ammonia. Ammonia was displaced from (NH(3))(2)YbFe(CO)(4) by acetonitrile in acetonitrile solution, and the crystalline compounds {[(CH(3)CN)(3)YbFe(CO)(4))](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity) were obtained. An earlier X-ray study of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) showed that it is a ladder polymer with direct Yb-Fe bonds. In the present study, an X-ray crystal structure analysis also showed that [(CH(3)CN)(3)YbFe(CO)(4)](infinity) is a sheetlike array with direct Yb-Fe bonds. Crystal data for {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity): monoclinic space group P2(1)/c, a = 21.515(8) ?, b = 7.838(2) ?, c = 19.866(6) ?, beta = 105.47(2) degrees, Z = 4. Crystal data for [(CH(3)CN)(3)YbFe(CO)(4)](infinity): monoclinic space group P2(1)/n, a = 8.364(3) ?, b = 9.605(5) ?, c = 17.240(6) ?, beta = 92.22(3) degrees, Z = 4. Electrical conductivity measurements in acetonitrile show that these acetonitrile complexes are partially dissociated into ionic species. IR and NMR spectra of the solutions reveal the presence of [HFe(CO)(4)](-). However, upon recrystallization, the acetonitrile complexes show no evidence for the presence of [HFe(CO)(4)](-) on the basis of their IR spectra. The solid state MAS (2)H NMR spectra of deuterated acetonitrile complexes give no evidence for [(2)HFe(CO)(4)](-). It appears that rupture of the Yb-Fe bond could occur in solution to generate the ion pair [L(n)Yb](2+)[Fe(CO)(4)](2-), but then the highly basic [Fe(CO)(4)](2-) anion could abstract a proton from a coordinated acetonitrile ligand to form [HFe(CO)(4)](-). However, upon crystallization, the proton could be transferred back to the ligand, which results in the neutral polymeric species.     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.