Growth, new growth, and amplification of carbon nanotubes as a function of catalyst composition

Carbon nanotubes (CNTs) have been grown using Fe, Co, Ni, and Co/Fe spin-on-catalyst (SOC) systems, involving the metal salt dispersed with a spin-on-glass precursor. During initial growth runs (CH4/H2/900 degrees C), the CNT yield followed the order Co-SOC > Fe-SOC > Ni-SOC. The Fe catalysts produced the longest nanotubes at the expense of a larger average CNT diameter and broader diameter distribution than the Co-SOC system. A series of Co/Fe-SOCs were prepared where as the atomic percentage of Co is increased nucleation of CNT increases but the CNT length decreases. The linear relationship between the diameter and length of CNTs grown from the Co/Fe-SOC suggests that slow growth is beneficial with respect to control over CNT diameter. After initial CNT growth, the original samples were subjected to additional growth runs. Four individual reactions were observed in the Fe-SOC and binary Co/Fe-SOC: regrowth (amplification), double growth (a second CNT growing from a previously active catalyst), CNT etching, and nucleation from initially inactive catalysts (new growth). CNT etching was observed for the mixed catalyst systems (Co/Fe-SOC) but not for either Fe-SOC or Co-SOC. During the regrowth experiments, CNTs were observed that were not present after the initial growth run (and were not as a result of amplification or double growth). Thus, catalysts, which were initially inactive toward nucleation of CNTs in the original growth run, are capable of becoming activated when placed back into the furnace and submitted to regrowth under identical conditions.     

Nanowelding of carbon nanotube-metal contacts: an effective way to control the Schottky barrier and performance of carbon nanotube based field effect transistors

Schottky barriers formed at carbon nanotube (CNT)-metal contacts have been well known to be crucial for the performance of CNT based field effect transistors (FETs). Through first principles calculations we show that a nanowelding process can drastically reduce the Schottky barriers at CNT-metal interfaces, resulting in significantly improved conductivity of CNT-based FETs. The proposed nanowelding can be realized by either laser local heating or a heating process via a controllable pulse current. Results presented in this paper may have great implications in future design and applications of CNT-based electronics.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

A direct route toward assembly of nanoparticle-carbon nanotube composite materials

The preparation of nanocomposite materials from carbon nanotubes (CNTs) and metal or metal oxide nanoparticles has important implications to the development of advanced catalytic and sensory materials. This paper reports findings of an investigation of the preparation of nanoparticle-coated carbon nanotube composite materials. Our approach involves molecularly mediated assembly of monolayer-capped nanoparticles on multiwalled CNTs via a combination of hydrophobic and hydrogen-bonding interactions between the capping/mediating shell and the CNT surface. The advantage of this route is that it does not require tedious surface modification of CNTs. We have demonstrated its simplicity and effectiveness for assembling alkanethiolate-capped gold nanoparticles of 2-5 nm core sizes onto CNTs with controllable coverage and spatially isolated character. The loading and distribution of the nanoparticles on CNTs depend on the relative concentrations of gold nanoparticles, CNTs, and mediating or linking agents. The composite nanomaterials can be dispersed in organic solvent, and the capping/linking shells can be removed by thermal treatment to produce controllable nanocrystals on the CNT surfaces. The nanocomposite materials are characterized using transmission electron microscopy and Fourier transform infrared spectroscopy techniques. The results will be discussed in terms of developing advanced catalytic and sensory nanomaterials.     

Tailoring wettability change on aligned and patterned carbon nanotube films for selective assembly

The effects of oxygen reactive ion etching (RIE) on the surface wettability of aligned carbon nanotube (CNT) films have been systematically investigated. It was found that 3 s of RIE treatment could change the surface of CNT films from hydrophobic to more hydrophilic. The degree of modification in the surface wettability of the film could be controlled by the flow rate of O2 gas during the RIE process. It is proposed that such a surface hydrophobicity change is related to the opened structure and functionalized tip of as-treated CNTs by oxygen reactive ions. More importantly, after the RIE treatment, focused laser pruning was utilized to trim the surface layer of treated CNTs and revert them back to a hydrophobic surface. Combined with the laser pruning technique and O2 RIE treatment, CNT templates with interlaced wettability surfaces in a stripe pattern have been fabricated. It has been demonstrated that this interlaced and structured wettability pattern can be used to selectively assemble microspheres or quantum dots on the aligned CNT films with desired patterns.     

Effects of charge distribution on water filling process in carbon nanotube

Using umbrella sampling technique with molecular dynamics simulation, we investigated the nanofluidic transport of water in carbon nanotube (CNT). The simulations showed that a positive charge modification to the carbon nanotube can slow down the water column growth process, while the negative charge modification to the carbon nanotube will, on the other hand, quicken the water column growth process. The free energy curves were obtained through the statistical process of water column growth under different charge distributions, and the results indicated that these free energy curves can be employed to explain the dynamical process of water column growth in the nanosized channels. Supported by the National Natural Science Foundation of China (Grant Nos. 10425420 and 20773145), the Ministry of Science and Technology of China (Grant Nos. 2006CB806200 and 2006CB932100), and the Chinese Academy of Sciences including its CNIC Supercomputer Center.     

Monitoring carbon nanotube growth by formation of nanotube stacks and investigation of the diffusion-controlled kinetics

A novel method is presented to monitor carbon nanotube (CNT) growth by formation of CNT stacks. By this process, CNT growth kinetics are investigated for densely packed CNT films in the gas-diffusion-controlled regime. CNT stacks are fabricated by water-assisted selective etching and the cyclic introduction of ethylene into the chemical vapor deposition (CVD) reactor. Formation of the CNT stacks allows monitoring of the CNT growth evolution, thereby providing insight into the growth kinetics. A parabolic increase of CNT length versus time is observed, indicating a gas-diffusion-controlled growth mode. The densely packed, well-aligned CNT films act as porous barrier layers to the diffusion of ethylene precursor to the catalyst nanoparticles, since these films form via a base-growth mode under the conditions invoked in our system. By adjustment of CNT growth time and temperature, a quantitative time-evolution analysis is performed to investigate the CNT growth model and extract the gas precursor mass transfer coefficient in the CNT films. The self-diffusion of gases in the densely packed CNT films is found to be Knudsen diffusion with a diffusion coefficient on the order of 10(-4) cm(2)/s.     

Direct growth of aligned multiwalled carbon nanotubes on treated stainless steel substrates

Growth of aligned carbon nanotubes (CNTs) on electrically conductive substrates is promising for many applications; however, the lack of complete understanding of the substrate effects on CNT growth poses a lot of technical challenges. Here, we report the direct growth of aligned multiwalled nanotubes (MWNTs) on chemically treated stainless steel (Type 304) using a chemical vapor deposition (CVD) process. A detailed X-ray photoelectron spectroscopy (XPS) analysis has been carried out for the various treated samples in order to better understand the correlation between the surface properties of the substrates and the MWNT growth. The XPS studies revealed that the CNTs prefer to grow on the enriched surface of iron oxides obtained by the chemical treatment rather than on the passive chromium oxide films present on the surface of the as-received stainless steel substrates. The density and alignment of the MWNTs could therefore be controlled by tuning the ratio of the iron oxides to chromium oxides through the chemical treatment on the stainless steel surfaces. On the basis of this method, selective growth of CNT patterns on stainless steel has also been demonstrated.     

In-flight kinetic measurements of the aerosol growth of carbon nanotubes by electrical mobility classification

We describe an on-the-fly kinetic study of gas-phase growth of multiwalled carbon nanotubes. The methodology employs electrical mobility classification of the CNT, which enables a direct measure of CNT length distribution in an aerosol reactor. The specific experiment employs two mobility classification steps. In the first step we mobility classify the catalyst particle, in this case Ni, created by pulsed laser ablation, to generate a stream of monodisperse particles. This then determined the diameter of the CNT, when a hydrocarbon/H2 mix is added in a heated aerosol reactor. A second electrical mobility classification step allows us to determine the length distribution of the CNTs. We found that CNT growth from ethylene required the addition of small amounts of water vapor, whereas growth from acetylene did not. We show that acetylene, which always has small amounts of acetone present when purchased, can provide the oxygen source to prevent catalyst coking. By varying the temperature of the growth, we were able to extract Arrhenius growth parameters. We found an activation energy for growth approximately 80 kJ mol(-1) from both acetylene and ethylene, which is considerably lower than previous works for substrate-grown CNTs (E(a) = 110-150 kJ mol(-1)). Furthermore, we observed that our aerosol CNT growth rates were about 2 orders of magnitude higher than those for substrate-grown CNTs. The dominant growth mechanism of CNT previously proposed is based upon bulk diffusion of carbon through nickel particles. However, on the basis of the lower activation energy found in this work, we proposed that the possible mechanism of gas-phase growth of CNT is correlated with both surface (E(a) = 29 kJ mol(-1)) and bulk diffusion (E(a) = 145 kJ mol(-1)) of carbon on nickel aerosol particles. Finally, the experimental approach described in this work should be amenable to other nanowire systems grown in the aerosol phase.     

Fluoride and lead adsorption on carbon nanotubes

The properties and applications of CNT have been studied extensively since Iijima discovered them in 1991[1,2]. They have exceptional mechanical properties and unique electrical property, highly chemical stability and large specific surface area. Thus far, they have widely potential applications in many fields. They can be used as reinforcing materials in composites[3], field emissions[4], hydrogen storage[5], nanoelectronic components[6], catalyst supports[7], adsorption material and so on.…     

Chiral-selective etching effects on carbon nanotube growth at edge carbon atoms

Chemical vapor deposition (CVD) utilizing metal cluster nanoparticle catalysts is commonly used to synthesize carbon nanotubes (CNT), with oxygen-containing species such as water or alcohol included in the feedstock for enhanced yield. However, the etching effect of these additives on the growth mechanism has rarely been investigated, despite evidence suggesting that etching potentially affects the chirality distribution of product CNTs. We used quantum chemical methods to study how water-based etchant radicals (OH and H) may enhance the chiral selectivity during CVD growth using CNT cap models. Chemical reactivities of the caps with the etchant radicals were evaluated using density functional theory (DFT). It was found that the reactivities on the cap edges correlate with the chirality of the caps. These results suggest that proper selection of etchant species can provide opportunities for selective chirality control of the product CNTs. © 2018 Wiley Periodicals, Inc.     

Recognition ability of DNA for carbon nanotubes correlates with their binding affinity

The ability to sort mixtures of carbon nanotubes (CNTs) based on chirality has recently been demonstrated using special short DNA sequences that recognize certain matching CNTs of specific chirality. In this work, we report on a study of the relationship between recognition sequences and the strength of their binding to the recognized CNT. We have chosen the (6,5) CNT and its corresponding DNA recognition sequences for investigation in this study. Binding strength is quantified by studying the kinetics of DNA replacement by a surfactant, which is monitored by following shifts in the absorption spectrum. We find that recognition ability correlates strongly with binding strength thus measured; addition or subtraction of just one base from the recognition sequence can enhance the kinetics of DNA displacement some 20-fold. The surfactant displaces DNA in two steps: a rapid first stage lasting less than a few seconds, followed by progressive removal lasting tens of minutes. The kinetics of the second stage is analyzed to extract activation energies. Fluorescence studies support the finding that the DNA sequence that recognizes the (6,5)-CNT forms a more stable hybrid than its close relatives.     

Fabrication of high-aspect-ratio polymer microstructures and hierarchical textures using carbon nanotube composite master molds

Scalable and cost effective patterning of polymer structures and their surface textures is essential to engineer material properties such as liquid wetting and dry adhesion, and to design artificial biological interfaces. Further, fabrication of high-aspect-ratio microstructures often requires controlled deep-etching methods or high-intensity exposure. We demonstrate that carbon nanotube (CNT) composites can be used as master molds for fabrication of high-aspect-ratio polymer microstructures having anisotropic nanoscale textures. The master molds are made by growth of vertically aligned CNT patterns, capillary densification of the CNTs using organic solvents, and capillary-driven infiltration of the CNT structures with SU-8. The composite master structures are then replicated in SU-8 using standard PDMS transfer molding methods. By this process, we fabricated a library of replicas including vertical micro-pillars, honeycomb lattices with sub-micron wall thickness and aspect ratios exceeding 50:1, and microwells with sloped sidewalls. This process enables batch manufacturing of polymer features that capture complex nanoscale shapes and textures, while requiring only optical lithography and conventional thermal processing.     

Optimized carbon nanotube fiber microelectrodes as potential analytical tools

The preparation and interesting electrochemical properties of carbon nanotube (CNT) fiber microelectrodes are reported. By combining the advantages of CNT with those of fiber electrodes, this type of microelectrode differs from CNT-modified or CNT-containing composite electrodes, because they are made solely of CNT without other components, for example additives or binders. The performance of these electrodes has been characterized with regard to, among others, the electrocatalytic oxidation of analytes via dehydrogenase-mediated reactions. In this context the reversible regeneration of the coenzyme NAD(+) using a mediator is a key step in the development of new amperometric sensor devices and we have successfully immobilized mediator molecules that are very efficient for this purpose on the surface of the CNT fiber electrode. The microelectrodes thus obtained have been compared with classic carbon microelectrodes and have promising behavior in biosensing applications, especially after specific pretreatments such as CNT alignment inside the fiber or expansion of the specific surface by chemically induced swelling.     

Theoretical study of binding of metal-doped graphene sheet and carbon nanotubes with dioxin

Using density functional theory, we have theoretically studied dioxin binding on a graphene sheet or carbon nanotubes (CNT), finding that they can be effective adsorbents for dioxin in the presence of calcium atoms. This is due to a cooperative formation of sandwich complexes of graphene sheet or (5,5) CNT through the interaction pi-Ca-pi with the total binding energy of more than 3 eV. This correlates with the band structure analysis, which indicates charge transfer from the carbon systems and calcium atoms to dioxin when the molecule binds to the metal-doped carbon systems. For CNT with small radii, the relative strength of CNT-dioxin interaction is dependent on their chiralities. Upon dioxin binding, a large increase in the electronic density of states near the Fermi level also suggests that they can be used for dioxin sensing. Fe-doped CNT is also found to bind dioxin strongly, revealing an important role played by remnants of metallic catalysts in the chemical properties of CNT.     

Electrocatalytic oxidation of DNA-wrapped carbon nanotubes

The electrical properties of single-walled carbon nanotubes (CNT) are of intense interest due to applications in nanoelectronics. Cyclic voltammetry and chronoamperometry have been used to explore the Ru(bpy)32+ electrocatalytic oxidation of DNA-solubilized carbon nanotubes. Dramatic current enhancements are observed with the addition of a CNT wrapped in an oligonucleotide sequence containing no oxidizable guanines. The current enhancement observed is solely due to the oxidation of the CNT by electrogenerated Ru(III) and subsequent recycling of the metal complex redox reaction. The chronoamperometric (CA) response is biphasic, and rate constants derived from the CA response were used to develop digital simulations of the cyclic voltammograms collected at the same CNT concentrations. Ten successive C' reactions were required to account for all of the observed signal. The oxidation of the CNT is a multielectron process, and this effect arises from the multiple electron donor sites in the carbon nanotube as well as the over oxidation of each site.     

Hierarchical structures of carbon nanotubes and arrays of chromium-capped silicon nanopillars: formation and electrical properties

The formation of stochastically oriented carbon-nanotube networks on top of an array of free-standing chromium-capped silicon nanopillars is reported. The combination of nanosphere lithography and chemical vapor deposition enables the construction of nanostructures that exhibit a hierarchical sequence of structural sizes. Metallic chromium serves as an etching mask for Si-pillar formation and as a nucleation site for the formation of carbon nanotubes through the chemical vapor deposition of ethene, ethanol, and methane, respectively, thereby bridging individual pillars from top to top. Iron and cobalt were applied onto the chromium caps as catalysts for CNT growth and the influence of different carbon sources and different gas-flow rates were investigated. The carbon nanotubes were structurally characterized and their DC electrical properties were studied by in situ local- and ex situ macroscopic measurements, both of which reveal their semiconductor properties. This process demonstrates how carbon nanotubes can be integrated into Si-based semiconductors and, thus, this process may be used to form high-surface-area sensors or new porous catalyst supports with enhanced gas-permeation properties.     

Growth and structure of carbon nanotube Y-junctions

The effect of a catalyst on the growth and structure of carbon nanotube Y-junctions (CNTYs) using chemical vapor deposition has been investigated. Cobalt-, magnesium-, and calcium-nitrates are utilized as precursors of catalysts Co, Mg, Ca, Co/Mg, Co/Ca, and Mg/Ca for CNTY synthesis. Experimental result shows that Co/Mg or Co/Ca can grow CNTYs with straight branches while Co, Mg, Ca, and Mg/Ca will not grow any CNTYs, indicating that only combinations of Co with Mg or Ca will facilitate the formation of CNTYs. In addition, the effect of the carbon source on the formation of CNTYs has also been studied. It is found that thiophene (C4H4S) can promote the formation of CNTYs, while other sources such as methane (CH4) and acetylene (C2H2) cannot. The result shows that both the catalyst and the carbon source substantially affect the formation of CNTYs.     

电位质子滴定与NEXAFS和XPS表征功能化多壁碳纳米管比较(英文)

Since the discovery of carbon nanotubes (CNT), this material has been recognized as an attractive catalyst support. CNT must be functionalized before use as a catalyst support and typically this involves oxidation. However, the functional group distribution on the CNT is very complex mixture of groups and varies with oxidation agent used. Here a simple acid-base titration is introduced to characterize the oxygen functionalized CNT. By comparing characterization with near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for both at the C and O K-edges, it can be demonstrated that potentiometric proton titration can be a fast and quantitative analysis for Brnsted acid functional groups on CNT.     

Adsorption of collagen onto single walled carbon nanotubes: a molecular dynamics investigation

Classical molecular dynamics (MD) simulation has been carried out to understand the adsorption of collagen like peptides onto single walled carbon nanotubes (CNT) in an aqueous environment. It is observed that the triple helical structure of all the model collagen like peptides (CPs) has been unaltered upon adsorption onto CNT. The model CPs do not wrap around the CNT, however, the axis of the triple helix subtends a cross angle with respect to the axis of the CNT. The interaction between the CPs and CNT as well as that between the CPs and water molecules was observed by MD simulation snapshots. The inherent nature of the interaction of CPs with CNT facilitates the penetration of CPs into the water/CNT interface. During this process, water molecules trapped between the CPs and CNT are appreciably displaced. Although, hydrophobic-hydrophobic interaction is crucial for the interaction, the role of πR (R = OH and NH(2)) interactions are also observed from the geometrical parameters. The sequence specific interaction of CPs with CNT is evident from the results. It is found that the length of the CNT, curvature of the CNT and length of the CPs do not significantly influence interaction between the two systems. Overall the findings provide important information for the development of nanocomposite materials from collagen and CNT.