3-叠氮-4-氨基呋咱的合成与晶体结构

以呋咱环为基本结构单元可以构建多系列性能优异的新型呋咱含能衍生物，它们一般具有能量密度高，标准生成焓大，氮含量高以及分子热力学稳定性较好等优点。3-叠氮-4-氨基呋咱（AAF）作为合成三唑联呋咱、多叠氮基呋咱、呋咱醚、腈基呋咱等多类含能化合物的重要中间体，而且本身也是一个高能量密度化合物，因此探讨其合成方法具有一定的意义。3-叠氮-4-氨基呋咱的合成路线如图1所示，合成分为3步：第一步是乙二醛与盐酸羟胺在氢氧化钠溶液中发生加成缩合反应得N-氨基乙二肟（DAG）。该反应具有强放热性，实验操作应小心。     

新型含能材料研究

1呋咱类化合物的合成含呋咱（氧化呋咱）环的含能化合物具有许多优异的炸药性能：标准生成焓高,富含氮氧,能量密度高,分子稳定性好,熔点较低。3,4-二（硝基呋咱基）氧化呋咱（DNTF）威力大,能量高,接近CL-20,安全性能较HMX和CL-20好,在熔铸炸药、推进剂及柔性导爆索等领域有着广阔的应用前景。DNTF属第四代高能炸药。     

用分子子图法计算硝基呋咱化合物的生成热

用新的分子子图法计算硝基呋咱类化合物的生成热 ,将呋咱基团视为母体 ,即基子图项 ;硝基、叠氮基、甲基、氰基拆分为一个个原子 ,从原子的角度来分分子子图 ,将碳、氢、氧、氮原子视为取代基 ,即亚子图项 .同时考虑呋咱基团的个数 ,考虑 1位、2位、3位、4位上碳、氢、氧、氮原子及双键、叁键对生成热的影响 ,还考虑不饱和度、总硝基个数、环的个数 (除呋咱环 )、氮氮及氮氧双键的个数对生成热的影响 .用这种新的分子子图编码方法 ,对硝基呋咱化合物的生成热进行了拟合和预估 ,取得了满意的结果 ,其回归方程的相关系数达到了 0 .995 4 .     

苯并氧化呋咱稳定性和异构化的DFT和ab initio研究

运用B3LYP/6-31G(d)密度泛函理论（DFT）方法对苯并氧化呋咱、邻二亚硝基苯及其间的异构化反应进行了计算研究。结果表明,苯并氧化呋咱的分子总能量比邻二亚硝基苯的低;由苯并氧化呋咱异构为邻二亚硝基苯的正向反应活化能（Ea+=51.0kJ/mol）,与文献实测值（58.6kJ/mol）较接近,而其逆向反应活化能（Ea-=4.6kJ/mol）很小,从而揭示了苯并氧化呋咱比邻二亚硝基苯更稳定·此外,进行了HF/3-21G、HF/6-31G(d)和MP2/6-31G(d)//6-31G(d)水平下相应的计算,发现B3LYP-DFT的结果较abinitio为优。谐振动频率的B3LYP/6-31G(d)计算还支持了邻二亚硝基苯为苯并氧化呋咱“自-自”互变重排反应的中间体。     

DNTF的合成与表征

3，4-二（硝基呋咱基）氧化呋咱（DNTF）是一新型高能量密度化合物，其感度较HMX的低，能量较HMX的高，与CL-20的相当。文中对DNTF及其中间体3-氨基-4-酰胺肟基呋咱（AAOF），3-氨基-4-酰氯肟基呋咱（ACOF），3，4-二（氨基呋咱基）氧化呋咱（DATF）及其异构体3，6-二（3＇-氨基呋咱基-4-基）-1，4-二氧杂-2，5-二氮杂环己-2，5-二烯（BADDD）的合成，表征和主要的物化和炸药性能进行了报道。     

(S)-1-苄基-3-羟基吡咯烷的合成及红外光谱研究

从L-苹果酸出发,经过与苄胺缩合反应得到(S)-1-苄基-3-羟基吡咯烷-2,5-二酮,再通过硼氢化钠-碘体系还原制得重要的医药中间体(S)-1-苄基-3-羟基吡咯烷。采用红外光谱法对原料、中间体及产物进行了测试并对硼氢化钠-碘体系还原酰亚胺的机理进行了研究。通过比较原料、中间体及产物相应特征吸收峰的消失或是出现,可知所得的产物为(S)-1-苄基-3-羟基吡咯烷;还原机理研究表明,硼氢化钠在碘催化下生成的硼烷与酰亚胺中的羰基形成四元环状过渡态,同时另外一分子硼烷与酰亚胺中的氮原子形成N-BH3复合物,然后羰基还原完全,得到(S)-1-苄基-3-羟基吡咯烷-硼烷复合物,最后在甲醇作用下脱去硼烷得到最终产物。     

新显色试剂1-(4-磺基苯)-3-(2-吡啶)-三氮烯的合成及其与镉(Ⅱ)的显色反应

合成了一种新三氮烯类显色剂1-(4-磺基苯)-3-(2-吡啶)-三氮烯(简称SPPT),并研究了在Triton X-100存在下,于pH为9.18的Na2B4O7-NaOH缓冲溶液中与镉的显色反应.结果表明,试剂与镉生成橙红色配合物.方法用于废水中微量镉的测定,结果令人满意.     

1-偶氮苯-3-(5-氯-2-吡啶)-三氮烯的合成及与锌的显色反应

合成了新显色剂1-偶氮苯-3-(5-氯-2-吡啶)-三氮烯.在表面活性剂OP存在下,pH为10.5-11.5的Na2B4O7-NaOH缓冲溶液中,新显色剂1-偶氮苯-3-(5-氯-2-吡啶)-三氮烯与锌发生显色反应,生成4∶1的红色配合物.配合物的最大吸收峰位于530nm,表观摩尔吸光系数为1.25×105L·mol-1·cm-1,Zn2 浓度在0-480μg/L范围内遵守比耳定律.测定废水中微量锌,结果令人满意.     

3，3’-二氨基-4，4’-偶氮呋咱及其氧化偶氮呋咱的合成

含有硝酰氧基和硝胺基团的含能化合物，对撞击、摩擦和静电火花的刺激相当敏感，而含有呋咱、偶氮、氧化偶氮和C-NO2等基团的杂环含能化合物的感度较低，以呋咱基团为基的含能衍生物由于具有能量密度高、标准生成焓大、氮含量高和耐热性能优良等优点，目前已成为重要的高能量密度材料。     

功能染料4,4′-双(4-羧基偶氮苯)二苯并-18-冠-6的制备及其吸收光谱

以二苯并-18-冠-6和对氨基苯甲酸为原料,经重氮化、偶合等多步反应,制备了一种功能染料——4,4’-双(4-羧基偶氮苯)二苯并-18-冠-6.产率68.5%,通过IR、~1H NMR和元素分析等方法对其结构进行表征。研究了不同金属离子对目标化合物紫外一可见吸收光谱的影响,用密度泛函理论对其作用机理进行探讨。结果表明,目标化合物的吸收光谱性能良好,对稀土元素和金属汞离子具有不同作用机理的选择性识别作用。     

ESR Studies of Nitroxides Produced from Secondary Amines Through Oxidation by Photoexcited N-Oxides

The photolysis of chloroform solutions containing 2-methyl-3-acetylquinoxalin N, N-dioxide (MAQO) and dialkyl amines leads to the observation of ESR spectra of the corresponding dialkyl nitroxides. Oxygen-transfer exciplex 5 which derived from the triplet state of MAQO is suggested as intermediate to give nitroxide through N-H bond cleavage in the secondary amine within 5.     

Dynamics of Exciplex Formations and Dissociation in Organic Molecule Vapors

The discovery and investigation of exciplex luminescence in the polyatomic molecule vapors^1-4 is of great importance for better understanding of the relaxation mechanisms in bimolecular complexes formed due to the charge transfer between photo-excited organic molecules and other type of molecules in the ground state. The study of the vapor-phase exciplex emission from 9, 10-dicyanoanthracene in the presence of N, N-dimethylaniline (9, 10-DCA + DMA) showed⁴ that the exciplex stabilities, their luminescence properties and the relative efficiency of monomer and exciplex luminescence essentially depend on the excess of the vibrational energy of excited 9, 10-DCA molecules.     

TADF激基复合物主体材料提升溶液法制备蓝色荧光有机发光二极管的效率

为了提升溶液法制备的蓝色荧光有机发光二极管(OLEDs)的效率,采用了基于热激活延迟发光(TADF)的激基复合物作为主体材料。TADF激基复合物主体可以利用反向系间窜跃上转换形成单线态激子并将能量传递到客体,从而可以同时利用发光层中的三线态激子和单线态激子,以提升蓝色荧光器件的效率。选择蓝色荧光材料1-4-Di-[4-(N,N-diphenyl)amino]styryl-benzene(DSA-ph)作为客体发光材料,4,4′,4″-T-ris(carbazol-9-yl)triphenylamine(TCTA)掺杂1,3,5-Tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)(TPBi)作为热激活延迟荧光激基复合物主体,通过溶液法制备了蓝色荧光OLEDs。通过测试TCTA,TPBi以及TCTA掺杂TPBi的光致发光光谱发现,与TCTA和TPBi相比,TCTA掺杂TPBi的光致发光谱(PL)发生了明显的红移(峰值波长变为437 nm),而且光谱变宽,证明了TCTA∶TPBi激基复合物的形成。通过对于DSA-ph掺杂激基复合物主体的薄膜与DSA-ph掺杂poly(methyl methacrylate)(PMMA)的薄膜进行PL测试发现,两者发光峰相同,都是来自DSA-ph的发光,说明激基复合物主体将能量传递到了DSA-ph;DSA-ph的吸收光谱与激基复合物主体的PL光谱存在很大重叠,说明激基复合物主体与DSA-ph的能量传递非常有效;通过对激基复合物主体掺杂不同浓度客体的薄膜进行瞬态PL衰减测试发现,与纯DSA-ph的寿命相比,DSA-ph掺杂激基复合物主体之后其寿命会延长,纯DSA-ph的寿命只有1.19 ns,DSA-ph掺杂激基复合物主体的荧光衰减曲线与激基复合物主体的荧光衰减曲线相似,这进一步证明了激基复合物主体将能量传递到了DSA-ph。研究了主体引入以及DSA-ph掺杂浓度对器件性能的影响。对于器件的亮度、电流密度、电压、电流效率、电致发光光谱等参数进行了测试,与不采用激基复合物主体的器件相比,采用激基复合物主体的器件性能明显改善,在DSA-ph掺杂浓度为10%时,器件亮度从2133.6 cd·m^-2提升到了3597.6 cd·m^-2,器件效率从1.44 cd·A-1提升到了3.15 cd·A-1,发光峰只有来自DSA-ph的发光。采用TADF激基复合物主体的方法有潜力实现溶液法制备的高效蓝色荧光OLEDs。     

Exciplex formation and electroluminescent absorption in ultraviolet organic light-emitting diodes

We investigated the formation of exciplex and electroluminescent absorption in ultraviolet organic light-emitting diodes(UV OLEDs) using different heterojunction structures.It is found that an energy barrier of over 0.3 eV between the emissive layer(EML) and adjacent transport layer facilitates exciplex formation.The electron blocking layer effectively confines electrons in the EML,which contributes to pure UV emission and enhances efficiency.The change in EML thickness generates tunable UV emission from 376 nm to 406 nm.In addition,the UV emission excites low-energy organic function layers and produces photoluminescent emission.In UV OLED,avoiding the exciplex formation and averting light absorption can effectively improve the purity and efficiency.A maximum external quantum efficiency of 1.2%with a UV emission peak of 376 nm is realized.     

混合发光层有机电致发光器件中的多重成分发射

以等摩尔空穴传输材料TPD和电子传输材料PBD组成结构为ITO/TPD/TPD∶PBD/PBD/Al的混合物发光层有机电致发光(EL)器件,观察到了相对于组成材料的荧光光谱红移的宽发射带。通过比较EL光谱,光致发光光谱及EL光谱分解,表明电致发光中同时包含单体发射、激基复合物和电荷对复合物的发射。激基复合物为TPD的激发态TPD*与PBD的基态相互作用形成TPD*PBD类型的复合物,电荷对复合物是带电荷的空穴传输分子(D+)的空穴和电子传输分子(A-)的电子交叉复合而形成的(D+-A-)*复合物。各激发态在电场作用下呈现不同的形成机理和复合过程,并且单体发射和激发态复合物的比例随电场而变化,导致发射光谱随电场增强而蓝移。该器件的最高亮度和最大外部量子效率分别为240 cd·(cm2)-1和0.49%。有机固态界面激基复合物或电荷对复合物的发射常出现宽的红移发射带,是调节发光颜色的有效手段。     

Exciplex liquid-phase thermometer using time-resolved laser-induced fluorescence

Pulsed photoexcitation of hydrocarbon fuels doped with organic molecules exhibits a temperature-dependent fluorescence spectrum that is used as the basis for a weakly intrusive optical thermometer. By use of pulsed excitation from a 308-nm 8-ns XeCl excimer laser with gated detection of the fluorescence emissions from doped n -heptane, we demonstrate that time-resolved measurement of the excited monomer and the redshifted excited-state complex (exciplex) fluorescence emissions can yield sub-1 degrees accuracy for temperatures ranging from 440 K to the vicinity of the critical temperature (540 K). The experiments also show that the exciplex fluorescence spectrum is pressure independent below and above supercritical pressure.     

Assessment of Nitrones as In Vivo Redox Sensors

Spin traps such as 5,5-dimethyl-1-pyrroline N-oxide, α-phenyl-tert-butyl nitrone, α-(4-pyridyl-1-oxide)-N-tert-butyl nitrone and newer generation 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline N-oxide analogs have been known for years. What are the desired properties of good probes for measuring in vivo redox reactions in biological systems? These are specificity, sensitivity, rapid, high yield kinetics, low toxicity, high stability and easy to administer and target. Unfortunately, the nitrones perform poorly in almost all of these categories. Typical in vivo concentrations of spin trap approach 100 mM (assuming solubility and toxicity are not an issue), frequently yield 1% nitroxide or less stoichiometry, are typically unstable with time and frequently lack specificity. In vivo electron paramagnetic resonance (EPR) experiments need to have strong signals that correlate with redox chemistry. The resultant signal should be stable and not rapidly interconvert to other diamagnetic species. Fortunately, some newer probes of in vivo redox reactions in biological systems have come upon the horizon. In fact some have been around for a long time, but their virtues are becoming increasingly appreciated. This paper summarizes the disadvantages of nitrones versus the clear advantages of other probes of free radicals, redox state and the like by EPR. It also expands on the properties of nitroxides and nitrones as therapeutics.     

Design of high-spin organic molecules: toward magnetic parts in molecular electronics

High-spin organic molecules are currently attracting great interest not only from the scientific viewpoint per se but also as the candidate for magnetic parts in molecular electronics. In this context, we have prepared interesting molecules, spiro-fused bis(diphenylamine)s, 10,10^′-spirobi[5,10-dihydrophenazasiline]s as the first step to obtain the novel di(nitroxide radical)s. These bis(diphenylamine)s showed two reversible one-electron redox couples by cyclic voltammetry, indicating that the two diphenylamine moieties are correlated each other through spiro-conjugation. Oxidation reaction of these amines resulted in mononitroxide species, the forbidden transitions in which were observed in the electron spin resonance spectra of its powder sample, showing S⩾3/2. This suggests that there exists a sort of intermolecular magnetic interaction in the solid state of the mononitroxide species.     

二甲氧基蒽－蒽醌体系分子内激发态复合物形成的结构条件与溶剂效应

本文报道了电子给体二甲氧基蒽(DMA)和电子受体蒽醌(AQ)以双酚A(BA)和对苯二酚(OP)连接起来的双发色团分子的合成和光谱性质研究,并根据光谱数据和荧光光谱,讨论了激发态复合物形成的结构因素和溶剂效应。     

Combinatorial fabrication and screening of organic light-emitting device arrays

The combinatorial fabrication and screening of 2-dimensional (2-d) small molecular UV-violet organic light-emitting device (OLED) arrays, 1-d blue-to-red arrays, 1-d intense white OLED libraries, 1-d arrays to study Förster energy transfer in guest-host OLEDs, and 2-d arrays to study exciplex emission from OLEDs is described. The results demonstrate the power of combinatorial approaches for screening OLED materials and configurations, and for studying their basic properties.