用TiO2，ZnO及Fe2O3纳米粒子光催化氧化庚烷的反应

 制备了三种n－型半导体氧化物TiO2，ZnO和Fe2O3纳米粒子，用X射线衍射和N2吸附技术分别对它们的结构及比表面积进行了表征．考察了三种氧化物粒子对庚烷的气相光催化氧化反应的催化活性．研究表明，对于同种催化剂，随着焙烧温度的升高，催化剂的粒径增大，比表 面积减小，光催化活性下降．三种催化剂纳米粒子的光催化活性顺序为TiO2（锐钛矿）＞ZnO＞Fe2O3，金红石型TiO2粒子的催化活性低于ZnO粒子．结合能带理论探讨了三种催化剂光催化活性差异的原因．     

不同方法制备的Ni／ZrO2-CeO2-Al2O3催化剂对CH4-CO2重整反应的催化性能

 采用水热合成法、溶胶凝胶法和共沉淀－负载法制备了相同NiO含量的Ni／ZrO2－CeO2－Al2O3催化剂，考察了它们在CH4－CO2重整反应中的催化性能及稳定性，测定了积碳量．用CO2程序升温脱附方法测试了它们的CO2吸附性能，用H2程序升温脱附方法测试了表面Ni的分散度．结果表明，随温度升高，CH4和CO2转化率降低的顺序是：溶胶凝胶法≈共沉淀－负载法＞水热合成法，并且反应产物中n（CO）／n（H2）比随温度升高而降低．水热法和共沉淀－负载法制备的催化剂稳定性好，且前者的活性比后者高；溶胶凝胶法制得的催化剂活性较高，但易失活．积碳量大小顺序是：水热法＞溶胶凝胶法＞共沉淀－负载法．与其他方法制备的催化剂相比，水热法制备的催化剂对CO2的吸附量更大，\r\n而且积碳主要存在于载体上，从而保证了催化剂的稳定性．     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

介孔分子筛P-SBA-1催化合成柠檬酸三丁酯

采用后合成法制备了介孔分子筛催化剂P-SBA-1,并用XRD和SEM对催化剂进行分析,表征结果表明催化剂P-SBA-1具有立方结构(空间点群Pm3n)。选用液体酸H2SO4和微孔分子筛HY、ZSM-5与SBA-1进行对比,结果表明催化剂的活性高低顺序为:H2SO4SBA-1HYZSM-5。将改性后的介孔分子筛P-SBA-1作为固体酸催化剂合成柠檬酸三丁酯。重点考察了催化剂用量、酸醇摩尔比、反应温度、反应时间等因素以及催化剂的重复使用性能。结果表明P-SBA-1催化合成柠檬酸三丁酯的最佳条件为:反应温度140℃,酸醇摩尔比1∶6,催化剂用量为反应物总质量的1.5%,反应时间5h。催化剂P-SBA-1重复使用性能良好。     

浸渍顺序对Ag-Pd/Ce0.8Zr0.2O2催化剂活性及脱附性能的影响

 采用不同的浸渍顺序制备了Ag-Pd/Ce0.8Zr0.2O2双组分催化剂,考察了催化剂对乙醇和CO氧化反应的催化活性,并对催化剂进行了TPD表征. 结果表明,浸渍顺序对催化剂的活性有很大的影响. 共浸渍催化剂的活性最高,其次为先浸渍钯后浸渍银的催化剂,先浸渍银后浸渍钯催化剂的活性最低. 催化剂上CO氧化活性与CO-TPD过程中CO2脱附峰的温度及强度有对应关系. 同时,乙醇氧化活性与C2H5OH-TPD过程中CO2脱附峰的温度有一定的对应关系. 这表明共浸渍催化剂的表面氧物种最活泼,最容易与吸附在催化剂表面的乙醇或CO发生氧化反应. 不同的浸渍顺序影响Ag或Pd的存在状态,共浸渍时有利于氧化态的形成; 但Ag状态的变化与催化剂上乙醇或CO氧化反应的活性没有对应关系.     

亮点介绍

<正>手性双Salen-Ti络合物协同催化合成手性氰醇衍生物Angew.Chem.Int.Ed.2010,49,6746～6750手性氰醇在化学制药和农药合成中应用广泛,是合成α-氨基酸等生理活性化合物的重要中间体.氰化物对醛或酮的催化不对称加成是合成手性氰醇衍生物的有效方法,虽已报道了多种类型的生物催化剂和化学催化剂,但通常存在催化效率或选择性低、底物适用范围窄、催化剂昂     

Au/FeOx催化3-硝基苯乙烯加氢反应

采用沉积-沉降法制备了负载型Au/γ-Fe2O3、Au/α-Fe2O3和Au/Fe3-O4催化剂,并利用X射线粉末衍射技术对催化剂进行了表征。 在不同反应介质（水、乙醇和无溶剂）中,研究了Au/FeOx催化剂催化3-硝基苯乙烯加氢反应,考察了反应温度以及载体对催化剂活性的影响。 实验结果表明,在介质水中3-硝基苯乙烯的转化率要远高于乙醇中或无溶剂条件下的转化率,且随温度的升高而增大,而其加氢产物3-氨基苯乙烯的选择性无显著变化。 不同氧化铁载体负载的Au催化剂在水中的活性顺序为Au/γ-Fe2O3＞Au/α-Fe2O3＞Au/Fe3O4,其活性的差异被认为来自于不同氧化铁载体与Au之间的相互作用。     

分了筛催化合成MTBE的反应性能研究

在开发出催化性能良好的合成ＭＴＢＥ沸石分子筛催化的基础上,详细考察了反应条件：包括温度、压力、空速、醇烯比等操作条件对改性β沸石分子筛催化剂的合成ＭＴＢＥ反应性能的影响。结果表明：反应条件对催化剂活性、ＭＴＢＥ选择性及活性稳定性都有一定影响。在一定范围内反应温度升高,烯烃的转化率增加、ＭＴＢＥ的选择性不变,但反应温度过高,ＭＴＢＥ的选择性和催化剂的稳定性变差;反应压力必须大于系统完全液化压力;醇烯     

Ru/ZrO2·xH2O催化剂催化肉桂醛选择性加氢制肉桂醇

采用共沉淀法制备了7.5%Ru/ZrO2·xH2O催化剂,运用N2物理吸附-脱附法、X射线衍射、X射线光电子能谱和高分辨透射电子显微镜等技术对催化剂进行了表征,并用于催化肉桂醛选择加氢制肉桂醇反应中,考察了温度、H2压力和溶剂对肉桂醛转化率和肉桂醇选择性的影响.结果表明,肉桂醛转化率随着温度或H2压力的升高而升高,而肉桂醇选择性则随之下降.该催化剂在极性溶剂中比在非极性溶剂中表现出更高的活性和肉桂醇选择性.尤其在极性溶剂三乙胺(Et3N)中反应活性最高,且具有较高的肉桂醇选择性.在Et3N中加入水可进一步提高反应活性和选择性.以V(Et3N)/V(H2O)=4的混合物为溶剂,在4MPa和70℃的优化条件下,反应6h,肉桂醛转化率为97.9%,肉桂醇选择性达85.2%.     

载体对镍催化剂催化乙醇水蒸气重整制氢反应性能的影响

 采用等量浸渍法制备了不同载体负载的镍催化剂,考察了载体对催化剂催化乙醇水蒸气重整制氢反应性能的影响. 结果表明,在650 ℃和101.3 kPa下,不同载体负载的催化剂上乙醇的转化率都接近100%,但选择性相差很大,选择性大小顺序为: ZnO≈La2O3＞CeO2＞MgO＞γ-Al2O3＞TiO2＞ZrO2＞硅胶＞硅藻土. TPR和XRD结果表明,除TiO2外,各载体负载的催化剂的主要物相中都包括NiO相,其对催化剂的活性起重要作用,而Ni与载体的相互作用程度影响催化剂的选择性. 当相互作用较弱,活性组分基本以NiO相存在时,催化剂的选择性较低;当相互作用太强,不存在NiO相时,催化剂的活性和选择性都很低; 当相互作用较强,部分Ni与载体作用生成新物相且与NiO相共存时,催化剂的活性和选择性最高.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.