水体中痕量挥发性有机物单体碳同位素组成分析

将固相微萃取(SPME)技术与冷阱富集系统相结合,对水体中痕量挥发性有机物进行了单体碳同位素分析,方法检测限较常规SPME提高了一个数量级。在优化的条件下,对20 μg/L的三氯乙烯/四氯乙烯和10 μg/L的苯/甲苯水溶液进行了单体碳同位素分析,相比于纯溶剂(液相)碳同位素值,顶空(气相)同位素分析误差不超过0.5‰,而样本标准偏差为0.3‰。对某受四氯乙烯污染的北京地下水进行了同位素测定,近污染源点(B408)与远污染源点(B230)四氯乙烯的碳同位素值(δ13C)分别为 -37.8‰和-34.45‰     

Simultaneous determination of catechins, rutin, and gallic acid in Cistus species extracts by HPLC with diode array detection

A simple high-performance liquid chromatography method using a diode array detector (DAD) is developed for the simultaneous analysis of five major catechins: (+)-catechin (C), (-)-epicatechin (EC), (-)-gallocatechin (GCT), (-)-epigallocatechin (EGC), (-)-epigallocatechin gallate (EGCG), and the phenolic plant metabolites gallic acid (GA) and rutin (RT) in lyophilized extracts of Cistus species. The optimal analytical conditions are investigated to obtain the best resolution and the highest UV sensitivity for the quantitative detection of catechins. The optimized conditions (acetonitrile-phosphate buffer 50mM, pH 2.5, gradient elution system on a C(18) reversed-phase column with a flow rate of 1 mL/min and UV absorbance at 210 nm) allowed a specific and repeatable separation of the studied analytes to be achieved. All compounds are successfully separated within 32 min. Calibration curves are linear in the 2-50 microg/mL range for GCT, C, and EGCG and in the 5-50 microg/mL range for GA, EGC, EC, and RT. The limit of detection values ranged from 0.24 to 0.74 microg/mL. The limit of quantitation limit values ranged from 0.77 to 1.94 microg/mL. The validated method is applied to the determination of the specific phytochemical markers GA, GCT, C, and RT in Cistus incanus and Cistus monspeliensis lyophilised extracts. The recovery values ranged between 78.7% and 98.2%. The described HPLC method appears suitable for the differentiation and determination of the most common catechins together with the glycoside rutin and the phenolic compound gallic acid and can be considered an effective and alternative procedure for the analyses of this important class of natural compounds.     

Simultaneous determination of phenytoin and dextromethorphan in urine by solid-phase extraction and HPLC-DAD

A rapid and simple high-performance liquid chromatographic method with photodiode array detection was developed for the separation and the simultaneous determination of phenytoin and dextromethorphan in human urine. Analysis was performed in less than 4.5 min in isocratic mode on a reversed-phase C18 column (5 microm; 150 x 4.6 mm) using a mobile phase composed of acetonitrile-buffer phosphate 0.01 M (60:40, v/v) adjusted to pH 6.0, at 1 mL/min flow rate and UV absorbance at 210 nm. The elution order of analytes was dextromethorphan (DXM), Internal Standard (IS), and phenytoin (PHT). Calibration curves were linear in the 7.5-25 microg/mL range for PHT and in the 10-30 microg/mL range for DXM. Spike recoveries for urine samples prepared at three spiking levels ranged from 97.8 to 102.3% for PHT and from 94.8 to 100.4% for DXM. The detection limit (LOD) values ranged from 0.08 microg/mL for PHT to 0.5 microg/mL for DXM. The quantitation limit (LOQ) values ranged from 0.3 microg/mL for PHT to 1.6 microg/mL for DXM. The sample preparation method involves a rapid and simple procedure based on solid-phase extraction using a C18 reversed-phase column. Validation of the optimised method was carried out according to the ICH guidelines. The method developed in this study allows the reliable simultaneous analysis of PHT and DXM, drugs that were never quantified together in previously reported analytical methods. The described method has the advantage of being rapid and easy and it could be applied in therapeutic monitoring of these drugs in human urine of epileptic patients.     

固相微萃取-气相色谱/同位素质谱法测定水中挥发性有机物单体碳同位素

建立了采用75μm碳分子筛/聚二甲基硅氧烷(CAR-PDMS)纤维的固相微萃取-气相色谱/同位素质谱联用方法测定水中挥发性有机污染物碳同位素。使用浸入式固相微萃取和顶空固相微萃取方法进行实验确定在低浓度条件下最佳δ13C测试方法。通过使用顶空固相微萃取前处理技术进行单体同位素分析分析灵敏度更高,应用CSIA技术对1,2-二氯乙烯,三氯乙烯,四氯化碳进行单体同位素分析,方法的检出限为70μg/L,与样本的标准偏差小于0.3‰。该法适用于水体中微量挥发性有机污染物的同位素组成测定。     

Simultaneous determination of four lignan compounds in Herpetospermum caudigerum by normal-phase high-performance liquid chromatography

A normal-phase high-performance liquid chromatographic method with diode array UV detection is developed for the simultaneous quantitation of four lignan compounds in Herpetospermum caudigerum. This analysis provides a good resolution and reproducibility. Chromatography is carried out with a mobile phase of N-hexane-dichlormethane-methanol (42.5:42.5:5, v/v) at a flow rate of 1.0 mL/min. UV detection is performed at 280 nm. The calibration curve for lignans concentration is linear over the range of 2.10 to 42.0 microg/mL, 15.26 to 305.2 microg/mL, 6.15 to 123.0 microg/mL, and 6.24 to 124.8 microg/mL, respectively. The limit of quantitation and detection for compounds 1, 2, 3, and 4 is 1.31, 2.74, 2.63, and 2.17 microg/mL and 0.28, 0.25, 0.27, and 0.31 microg/mL, respectively. The validation data show that the assay is sensitive, specific, accurate, and reproducible for the simultaneous quantitation of four compounds. This rapid method is therefore appropriate to quantitate these lignans in Herpetospermum caudigerum.     

A validated chromatographic method for the determination of flavonoids in Copaifera langsdorffii by HPLC

Hydroethanolic extracts of C. langsdorffii leaves have therapeutic potential. This work reports a validated chromatographic method for the quantification of polar compounds in the hydroethanolic extract of C. langsdorffii leaves. A reliable HPLC method was developed using two monolithic columns linked in series (100 x 4.6 mm - C18), with nonlinear gradient elution, and UV detection set at 257 nm. A procedure for the extraction of flavonols was also developed, which involved the use of 70% aqueous ethanol and the addition of benzophenone as the internal standard. The developed method led to a good detection response as the values for linearity were between 10.3 and 1000 microg/mL, and those for recovery between 84.2 and 111.1%. The detection limit ranged from 0.02 to 1.70 microg/mL and the quantitation limit from 0.07 to 5.1 microg/mL, with a maximum RSD of 5.24%. Five compounds, rutin, quercetin-3-O-alpha-L-rhamnopyranoside, kaempferol-3-O-alpha-L-rhamnopyranoside, quercetin and kaempferol, were quantified. This method could, therefore, be used for the quality control of hydroethanolic extracts of Copaifera leaves and their cosmetic and pharmaceutical products.     

Simultaneous determination of cyanogen chloride and cyanogen bromide in treated water at sub-microg/L levels by a new solid-phase microextraction-gas chromatographic-electron-capture detection method

A headspace solid-phase microextraction (HS-SPME) procedure has been developed and applied for the determination of cyanogen halides in treated water samples at microg/L concentrations. Several SPME coatings were tested, the divinylbenzene-Carboxen-polydimethylsiloxane fiber being the most appropriate coating. GC-electron-capture detection was used for separation and quantitation. Experimental parameters such as sample volume, addition of a salt, extraction time and desorption conditions were studied. The optimized method has an acceptable linearity, good precision, with RSD values <10% for both compounds, and it is sufficiently sensitive to detect ng/L levels. HS-SPME was compared with liquid-liquid microextraction (US Environmental Protection Agency Method 551.1) for the analysis of spiked ultrapure and granular activated carbon filtered water samples. There was good agreement between the results from both methods. Finally, the optimized procedure was applied to determine both compounds at the Barcelona water treatment plant (N.E. Spain). Cyanogen chloride in treated water was <1.0 microg/L and cyanogen bromide ranged from 3.2 to 6.4 microg/L.     

The extraction and analysis of 1,4-dioxane from water using solid-phase microextraction coupled with gas chromatography and gas chromatography-mass spectrometry

In this study, two methods are developed for the extraction of 1,4-dioxane (dioxane) from water using 80-microm carboxen-polydimethylsiloxane solid-phase microextraction fibers followed by either gas chromatography (GC)-flame ionization detection (FID) or GC-mass spectrometry (MS). With GC-FID, the lower limit of detection (LOD) for 1,4-dioxane is 2.5 microg/L (ppb) with a linear range of 5 to 10,000 microg/L, obtained by immersing the fiber in the sample for 20 min with agitation. Using GC-MS, the lower limit of quantitation is 0.5 microg/L, and the LOD is 0.25 microg/L. The upper linear range limit is 100 microg/L. Samples are extracted in 20 min using either heated headspace with agitation or direct immersion with agitation.     

An electrospray ionization tandem mass spectrometry based system with an online dual-loop cleanup device for simultaneous quantitation of urinary benzene exposure biomarkers trans,trans-muconic acid and S-phenylmercapturic acid

An electrospray ionization tandem mass spectrometry (ESI-MS/MS) system with an online dual-loop cleanup device was developed for simultaneous quantitation of the urinary benzene exposure biomarkers trans,trans-muconic acid (ttMA) and S-phenylmercapturic acid (SPMA). The cleanup device was constructed from an autosampler, two electrically operated two-position switching valves, a reversed-phase C18 trap cartridge, a 200-microL loop, and two solvent-delivery pumps. The device was interfaced directly with a triple-quadrupole mass spectrometer and fully controlled by computer software and hardware. Because isotope dilution by introducing 13C-labeled ttMA and SPMA as internal standards was employed, the precision of the analytical system was high (for ttMA, intra- and inter-day CV values ranged from 3.82-4.53%; for SPMA, 2.13-7.06%). The calibration curves obtained using human urine spiked with ttMA were linear from 15.6-4000 microg/L (R = 0.9998) and SPMA at concentrations from 0.78-200 microg/L (R = 0.9993). The method detection limit (MDL) for SPMA was 0.23 microg/L. The MDL of ttMA could not be determined accurately because of unavailability of an appropriate blank urine matrix, but was estimated to be lower than 7.43 microg/L. Without tedious manual sample cleanup procedures the analytical system is fully automated and is therefore useful for high-throughput simultaneous determination of urinary ttMA and SPMA. The sample throughput is roughly 100 samples per day. With the selectivity and the sensitivity provided by MS/MS detection, the analytical system can be used for large-scale monitoring of environmental or occupational exposure of humans to benzene.     

A method for determination of dimethyl benzoylphenyl urea (BPU) in human plasma by using LC/UV

Dimethyl benzoylphenyl urea (BPU) inhibited tubulin polymerization, caused microtubule depolymerization in vitro and demonstrated activity against solid tumors. BPU is being tested in phase I clinical trials. A rapid and specific method using LC/UV has been developed for quantitation of BPU in human heparin-containing plasma to perform pharmacokinetic and pharmacodynamic studies. BPU is extracted from plasma into acetonitrile:n-butyl-chloride using paclitaxel as the internal standard and separated on a Waters Symmetry C18 (3.9 x 150 mm, 5 microm) column with acetonitrile-water mobile phase (70:30, v/v) using isocratic flow at 1 mL/min for a run time of 5 min. Ultraviolet detection was utilized and performed at 225 nm for BPU and paclitaxel. The retention times were 1.9 min for paclitaxel and 4.1 min for BPU. Calibration curves were generated over the range of 0.01-10 microg/mL with coefficient of determination of > 0.99. The values for within-day and between-day precision were < or = 17.0% at the LLOQ and < or = 7.4% at the low, medium and high quality controls; accuracy was +/- 5.4%. Following administration of BPU 320 mg as a weekly oral dose to a patient with advanced solid tumor malignancies, the maximum plasma concentration was 2 micro g/mL and concentrations were quantifiable up to 168 h after administration. The lower limit of quantitation of 0.01 microg/mL allows for successful measurement of plasma concentrations in patients.     

A rapid and simple high-performance liquid chromatography method for the determination of human plasma levofloxacin concentration and its application to bioequivalence studies

A high-performance liquid chromatography method with fluorescence detection (HPLC-FLD) for the determination of levofloxacin in human plasma is described. Neutralized with phosphate buffer (pH 7.0), the sample (0.1 mL) was extracted with dichlormethane (1 mL). After voltex-mixing and centrifuged at 3000g for 6 min at 4 degrees C, the upper aqueous layer was aspirated using a micro vacuum pump and the organic layer was directly transferred to a clean test tube without pipetting. The organic solvent was evaporated and the residues were reconstituted with the mobile phase. Levofloxacin and terazosin (internal standard, IS) were chromatographically separated on a C(18) column with a mobile phase containing phosphate buffer (pH 3.0, 10 mm), acetonitrile and triethylamine (76:24:0.076, v/v/v) at a flow rate of 1 mL/min. The analytes were detected using fluorescence detection at an excitation and emission wavelength of 295 and 440 nm, respectively. The linear range of the calibration curves was 0.0521-5.213 microg/mL for levofloxacin with a lower limit of quantitation (0.0521 microg/mL). The retention times of levofloxacin and terazosin were 2.5 and 3.1 min, respectively. Within- and between-run precision was less than 12 and 11%, respectively. Accuracy ranged from -6.3 to 4.5%. The recovery ranged from 86 to 89% at the concentrations of 0.0521, 0.5213 and 5.213 microg/mL. The present HPLC-FLD method is sensitive, efficient and reliable. The method described herein has been successfully used for the pharmacokinetic and bioequivalence studies of a levofloxacin formulation product after oral administration to healthy Chinese volunteers.     

Determination of tilmicosin residues in cow and sheep milk by liquid chromatography

This method was developed and validated to detect and quantitate tilmicosin residues in cow milk over a range of 0.010-10 microg/mL, and in sheep milk over a range of 0.025-0.5 microg/mL. The procedure involves extracting the milk sample with acetonitrile and using a C18 cartridge to perform a solid-phase extraction cleanup of the extract. A reversed-phase gradient liquid chromatography method with detection at 280 nm is used to separate the tilmicosin from matrix components in a 30 min run time. The limit of quantitation of the method is 0.010 microg/mL for cow milk, and 0.025 microg/mL for sheep milk. Average percentage recoveries for milk samples ranged from 82 to 94%. Percentage relative standard deviation values ranged from 3.1 to 17.2%.     

Determination of dichloroanilines in human urine by gas chromatography/mass spectrometry: validation protocol and establishment of Reference Values in a population group living in central Italy

3,4- and 3,5-Dichloroanilines (DCAs) are common markers of some non-persistent pesticides, e.g. linuron, diuron, vinclozolin, and iprodione. The general population may be exposed to these DCAs and/or their precursors mainly through diet. Since adverse effects on human health, such as endocrine disruption, have been reported, biological monitoring is essential for exposure assessment both of occupationally exposed subjects and of the general population. A highly sensitive and selective gas chromatography/mass spectrometry (GC/MS) method has been developed for the determination of 3,4- and 3,5-DCAs in urine using 4-chloro-2-methylaniline as an internal standard. The selected ion monitoring (SIM) mode was employed for quantitation of the analytes. The sample treatment procedure is simple and fast and no derivatization is required. The overall method was validated including uncertainty measurement. The limit of detection (LOD) and the lower limit of quantitation (LLOQ) were determined to be 0.005 and 0.010 microg/L for both analytes. The method was then applied to the establishment of reference values for a population group living in a rural area of central Italy (Novafeltria, Marche). A total of 151 out of 153 samples were found to be positive for 3,5-DCA, and 81.7% were positive for 3,4-DCA. For this group, 3,4-DCA levels ranged from 0.01 to 6.19 microg/L, while 3,5-DCA urinary concentrations were between 0.02 and 6.71 microg/L.     

An improved high-performance liquid chromatographic method with a solid-phase extraction for the determination of piperacillin and tazobactam: application to pharmacokinetic study of different dosage in Chinese healthy volunteers

An improved HPLC method was developed for the determination of piperacillin and tazobactam in human plasma and pharmacokinetic study in Chinese healthy volunteers. Piperacillin and tazobactam in human plasma were extracted by solid-phase extraction and separated on a C(18) column and detected at 220 nm. The mobile phase for piepracillin consisted of 0.01 mol/L sodium dihydrogen phosphate (pH = 4.65) and acetonitrile (71:29, v/v), and that for tazobactam was 0.05 mol/L sodium dihydrogen phosphate (pH = 4.45) and methanol (90:10, v/v). The method was linear in the range 0.25-320.00 microg/mL for piperacillin (r(2) = 0.995) and 0.25-64.00 microg/mL for tazobactam (r(2) = 0.994). The lower limit of quantification of both compounds was 0.25 microg/mL. The intra- and inter-day precisions of piperacillin and tazobactam at three concentrations were all less than 9.2% and accuracies were within the range 97.0-108.0%. The method was used to investigate the pharmacokinetics of piperacillin and tazobactam in 12 volunteers who were intravenously given a dosage of 1.25, 2.50 and 3.75 g in three periods. The results showed that piperacillin sodium-tazobactom sodium (4:1) for injection in Chinese people fits linear dynamics, and the administred dosage can be adjusted with therapeutic effect.     

Determination of bisphenol A in water by isotope dilution headspace solid-phase microextraction and gas chromatography/mass spectrometry without derivatization

The original solid-phase microextraction (SPME) fibers use an epoxy resin adhesive that releases bisphenol A (BPA) during thermal desorption of the fiber. This adversely affects the method detection limit and accuracy when these products are used for the determination of BPA. In this work, 5 new metal alloy SPME fibers that do not use epoxy resins were compared for the extraction of BPA in water. The performance of the optimum SPME fiber with 60 microm carbowax-polyethylene glycol coating for the headspace SPME of BPA in water was investigated systematically under different extraction conditions. Salt was found to increase the partitioning of BPA from water into the headspace until saturation was reached. Partitioning of BPA from water into the headspace also increased at higher extraction temperatures, as did longer extraction times. However, extraction of BPA from water onto the SPME fiber was not improved for solutions adjusted to pH 2 compared to the unadjusted neutral solutions. The new BPA method showed good linearity over the concentration range of 2.5 to 40 microg/L [correlation coefficient (r2) = 0.995] .The method detection limit for BPA was 0.5 microg/L, while the instrument detection limit was as low as 0.05 microg/L. Good repeatability was observed for BPA at levels of 5 and 20 microg/L with relative standard deviation values < 10%. The automated headspace SPME method developed in this work was used to investigate migration of BPA from polycarbonate bottles into water, and levels of BPA in water ranged from 1.7 to 4.1 microg/L.     

Quantitative analysis of aglycone quercetin in mulberry leaves (Morus alba L.) by capillary zone electrophoresis.

A capillary zone electrophoresis method was established for analysis of aglycone quercetin in mulberry leaves (Morus alba L.). The influence of, e.g., background electrolyte concentrations and pH, surfactant concentrations, organic solvents, temperature, and voltage on the separation of aglycone quercetin, rutin, quercitrin, kaempferol, catechin, and gallic acid was systematically investigated. The optimum condition providing baseline separation of all compounds within 16.5 min was obtained in 150 mM boric acid (pH 10.0) using a fused-silica capillary with an effective length of 42.5 cm (50 microm inner diameter), temperature of 32 degrees C, and voltage of 15 kV. Method assessment was performed by standard addition method using rutin as an internal standard. Linearity of the method was excellent (r(2) > 0.999) over the concentration tested (40-160 microg/mL). The relative standard deviations (%RSDs) from injection, intraday, and interday precision were less than 2.5%. Recoveries were good (asymptotically equal to 100.0%,%RSD = 0.8%) with a limit of detection (LOD) and limit of quantitation (LOQ) of 0.86 and 3.16 microg/mL (%RSD = 1.8%), respectively. The aglycone quercetin found in the mulberry leaves was 0.452 g/100 g (%RSD = 0.6%) on dry weight.     

Determination of Ibuprofen in human plasma by high-performance liquid chromatography: validation and application in pharmacokinetic study

A specific method for the simultaneous determination of S-(+)Ibuprofen and R-(-)Ibuprofen enantiomers in human plasma is described. Adopting a high-performance liquid chromatographic (HPLC) system with spectrofluorometer detector, the compounds were extracted from plasma in alcohol medium and were separated on C18 column, using a solution of acetonitrile-water-acetic acid-triethylamine as mobile phase. The limit of quantitation was 0.1 microg/mL for both compounds. The method was validated by intra-day assays at three concentration levels and was used in a kinetic study in healthy volunteers. During the study we carried out inter-day assays to confirm the feasibility of the method.     

New liquid chromatographic method for determination of rabeprazole sodium in coated tablets

Rabeprazole sodium is a proton pump inhibitor that covalently binds and inactivates the gastric parietal cell proton pump (H+/K+ ATPase). Little has been published about the quantitative determination of this drug. The aim of this research was to develop a new liquid chromatographic method for quantitative determination of rabeprazole in coated tablets. The system consisted of a Hypersil Keystone Betabasic C8 column (250 x 4.6 mm, 5 microm particle size), an isocratic acetonitrile-water (35 + 65) mobile phase at a flow rate of 1.0 mL/min, and a diode array detector set at 282 nm. The following validation parameters were evaluated: linearity, precision, accuracy, specificity, detection and quantitation limits, and robustness. The method showed good linearity in the concentration range of 10-70 microg/mL. The quantitation limit was 2.43 microg/mL, and the detection limit was 0.80 microg/mL. The intra- and interday precision data showed that the method has good reproducibility (relative standard deviation = 1.03). Accuracy and robustness were also evaluated, and the results were satisfactory. The mean recovery was 101.61%. The analysis of a placebo mixture demonstrated the method is also specific.     

A simple determination of mizoribine in human plasma by liquid chromatography with UV detection

A simple liquid chromatography (LC) method was developed for determination of the therapeutic level of mizoribine in human plasma. After precipitation of plasma proteins with 6% perchloric acid, mizoribine was determined by LC with spectophotometric detection. The peak height for mizoribine was linearly related to its concentrations, which ranged from 0.09 to 3.13 microg/mL. Therefore, the limit of quantitation was considered to be 0.09 microg/mL. The accuracy was 104.96-107.37%. The intra- and interday relative standard deviation values were in the range of 1.10-3.25%. The detection limit was 0.025 microg/mL, defined as a signal-to-noise ratio of 3. The plasma concentrations of mizoribine were not related to the dosage. Because mizoribine was mainly excreted in the urine, the plasma concentrations of mizoribine might be affected by a change in renal function. Therefore, the mizoribine concentration in blood should be monitored and the dosage adjusted, depending on the condition of renal function. It was suggested that the present method may be applied well in the therapeutic drug monitoring for mizoribine.     

A new approach to determine method detection limits for compound-specific isotope analysis of volatile organic compounds

Compound-specific isotope analysis (CSIA) has been established as a useful tool in the field of environmental science, in particular in the assessment of contaminated sites. What limits the use of gas chromatography/isotope ratio mass spectrometry (GC/IRMS) is the low sensitivity of the method compared with GC/MS analysis; however, the development of suitable extraction and enrichment techniques for important groundwater contaminants will extend the fields of application for GC/IRMS. So far, purge and trap (P&T) is the most effective, known preconcentration technique for on-line CSIA with the lowest reported method detection limits (MDLs in the low microg/L range). With the goal of improving the sensitivity of a fully automated GC/IRMS analysis method, a commercially available P&T system was modified. The method was evaluated for ten monoaromatic compounds (benzene, toluene, para-xylene, ethylbenzene, propylbenzene, isopropylbenzene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, fluorobenzene) and ten halogenated volatile organic compounds (VOCs) (dichloromethane, cis-1,2-dichloroethene, trans-1,2-dichloroethene, carbon tetrachloride, chloroform, 1,2-dichloroethane, trichloroethene, tetrachlorethene, 1,2-dibromoethane, bromoform). The influence of method parameters, including purge gas flow rates and purge times, on delta13C values of target compounds was evaluated. The P&T method showed good reproducibility, high linearity and small isotopic fractionation. MDLs were determined by consecutive calculation of the delta13C mean values. The last concentration for which the delta13C value was within this iterative interval and for which the standard deviation was lower than +/-0.5 per thousand for triplicate measurements was defined as the MDL. MDLs for monoaromatic compounds between 0.07 and 0.35 microg/L are the lowest values reported so far for continuous-flow isotope ratio measurements using an automated system. MDLs for halogenated hydrocarbons were between 0.76 and 27 microg/L. The environmental applicability of the P&T-GC/IRMS method in the low-microg/L range was demonstrated in a case study on groundwater samples from a former military air field contaminated with VOCs.