Comparative evaluation on the thermal properties and stability of MWCNT nanofluid with conventional surfactants and ionic liquid

Journal of Thermal Analysis and Calorimetry - Conventional surfactants such as CTAB (cetrimonium bromide), SDS (sodium dodecyl sulphate), SDBS (sodium dodecyl sulphonate) are combined with...     

Heat transfer and friction factor analysis of MWCNT nanofluids in double helically coiled tube heat exchanger

Journal of Thermal Analysis and Calorimetry - The convective heat transfer rate and friction factor analysis are determined with the help of a double helically coiled tube heat exchanger by...     

Heat transfer analysis of micropolar hybrid nanofluid over an oscillating vertical plate and Newtonian heating

Journal of Thermal Analysis and Calorimetry - The unsteady flow of micropolar hybrid nanofluids through an oscillating vertical plate having infinite length has been analyzed in this study. This...     

Heat transfer of viscous fluid in a vertical channel sandwiched between nanofluid porous zones

Journal of Thermal Analysis and Calorimetry - Mixed convection in vertical parallel channels is analyzed with the viscous fluid sandwiched between nanofluids within porous material filled in a...     

Heat transfer analysis of tangent hyperbolic nanofluid in a ciliated tube with entropy generation

In this paper, we analyze the effect of heat transfer on the flow of tangent hyperbolic nanofluid in a ciliated tube (fallopian tube where embryo in blood make the development). This study will be beneficial for the researchers and medical experts in the field of embryology. The nanoparticles are beneficial to remove the cysts from the fallopian tube where development of embryo takes place. To resolves the ciliary flow problems, medical doctors use nanoparticles (drug delivery) that may create a temperature gradient. The heat transfer helps to optimize the energy for which the entropy generation is reduced. Therefore, in this research we discuss the heat transfer effect on tangent hyperbolic nanofluid and entropy generation due to ciliary movement. The governing partial differential equations are solved by HPM and software MATHEMATICA?. Effect of viscoelastic parameter, nanoparticles, cilia length and Brinkman number on the velocity, temperature and entropy generation has been illustrated with the help of graphs. Graphical results show that thermal conductivity of fluid increases by adding nanoparticles. The entropy generation due to nanoparticles will decrease the viscosity near the tube wall and blood through tube will flow with normal pressure.

     

Rheological and electrical properties of polypropylene/MWCNT composites prepared with MWCNT masterbatch chips

Melt compounded PP/MWCNT (polypropylene/multi-walled carbon nanotube) composites were prepared by diluting highly concentrated masterbatch chips. Maleic anhydride grafted polypropylene (PP-g-MAH) was used as a compatibilizer to promote dispersion and interaction of MWCNTs. Rheological properties were investigated with respect to the MWCNT and compatibilizer loadings, and related to morphological and electrical properties. As the MWCNT loading was increased, shear viscosity and yield stress were increased at low shear rate region because of increased interaction between MWCNT particles. When the MWCNT loading was low, MWCNT dispersion was improved by the PP-g-MAH compatibilizer because MWCNTs were wetted sufficiently due to the presence of the compatibilizer. However, rheological and electrical properties of highly concentrated MWCNT composites with the compatibilizer were not improved compared with PP/MWCNT composites without the compatibilizer because the compatibilizer did not provide sufficient wrapping of MWCNT particles. Electrical and morphological properties of PP/MWCNT composites were correlated with the rheological properties in steady and dynamic oscillatory shear flows.     

Combination of nanofluid and inserts for heat transfer enhancement

Improving heat transfer is a critical subject for energy conservation systems which directly affects economic efficiency of these systems. There are active and passive methods which can be employed to enhance the rate of heat transfer without reducing the general efficiency of the energy conservation systems. Among these methods, passive techniques are more cost-effective and reliable in comparison with active ones as they have no moving parts. To achieve further improvements in heat transfer performances, some researchers combined passive techniques. This article performs a review of the literature on the area of heat transfer improvement employing a combination of nanofluid and inserts. Inserts are baffles, twisted tape, vortex generators, and wire coil inserts. The progress made and the current challenges for each combined system are discussed, and some conclusions and suggestions are made for future research.

     

Heat transfer exaggeration and entropy analysis in magneto-hybrid nanofluid flow over a vertical cone: a numerical study

Journal of Thermal Analysis and Calorimetry - Entropy analysis is closely scrutinized for unsteady mixed convection in magneto-hybrid nanofluid (Cu–Fe $$_3$$ O $$_4$$ –water) flow over...     

Heat Transfer Performance of Milk Pasteurization Plate Heat Exchangers Using MWCNT/Water Nanofluid

Increasing efficacy of plate heat exchanger (PHE) is a method of reducing energy consumption of milk pasteurization and sterilization in dairy industries. In order to enhance heat transfer capability of water as a hot stream in PHEs, multiwalled carbon nanotubes (MWCNT) were added to water. An experimental setup was designed and manufactured to measure heat transfer coefficient and Nusselt number (Nu) as two key parameters for convective heat transfer. This system had two individual loops for hot and cold fluids. The experimental results clearly indicated that heat transfer coefficient and Nu number of pure water increased by adding MWCNT with weight concentration of less than 1 wt%. With increasing weight concentration of the nanoparticles, heat transfer coefficient and Nu number increased. This augmentation was intensified at higher Peclet numbers which showed more effective presence of them at high flow rates of nanofluids. Moreover, at constant weight concentration, both heat transfer coefficient and Nu number increased. Augmentation of heat transfer capability resulted in more heat exchange with milk fluid in a short time; thus, before occurrence of fouling in plates of exchanger, pasteurization of milk and production of the products would be easier.      

Electrical and rheological percolation of PMMA/MWCNT nanocomposites as a function of CNT geometry and functionality

Composites of poly(methyl methacrylate) (PMMA) with multi-walled carbon nanotubes (MWCNT) of varying aspect ratio and carboxylic acid functionality were prepared using melt mixing. The extent of dispersion and distribution of the MWCNTs in the PMMA matrix was investigated using a combination of high-resolution transmission electron microscopy (HRTEM), wide-angle X-ray diffraction (XRD) and Raman spectroscopy. The electrical resistivity and oscillatory shear rheological properties of the composites were measured as a function of MWCNT geometry, functionality, and concentration. The fundamental ballistic conductance of the pristine free-standing MWCNTs was investigated using a mechanically controlled break-junction method. The electrical conductivity of PMMA was enhanced by up to 11 orders of magnitude for MWCNT concentrations below 0.5 wt.%. MWCNTs having higher aspect ratio, above 500, or functionalized with carboxylic acid groups readily formed rheological percolated networks with thresholds, determined from a power law relationship, of 1.52 and 2.06 wt.%, respectively. The onset of pseudo-solid-like behaviour and network formation is observed as G′, η∗, and tan δ⁻¹ are independent of frequency as MWCNT loading increased. Sufficiently long and/or functionalized tubes are required to physically bridge or provide interfacial interactions with PMMA to alter polymer chain dynamics. Carboxylic acid functionalization disrupts the crystalline order of MWCNTs due to a loss of π-conjugation and electron de-localisation of sp² C-C bonds resulting in non-ballistic electron transport in these tubes, irrespective of how highly dispersed they are in the PMMA matrix.     

Microstructure and rheological properties of polybutadienes

The viscosities, rubbery deformations, densities, and their dependence on temperature have been measured for several series of polybutadienes with molecular weights ranging from 5,000 to 400,000 and differing in proportions of cis and trans structures (cis content from 40 to 95%). On the basis of the viscosity measurements the critical molecular weight M_c has been determined, corresponding to a sharp change in the nature of the viscosity versus molecular weight dependence. Rubbery deformations are displayed pronouncedly in specimens with M > M_c and are closely related to the appearance of non-Newtonian flow. The value of M_c depends on the relative content of cis and trans forms. When M > M_c, the initial viscosity is a parameter sensitive to the microstructure of polybutadienes, so that with at a single molecular weight, depending on the ratio of cis and trans units, the viscosity may vary over a more than tenfold range. The glass transition temperature and activation energy of viscous flow rise regularly with increasing trans content in the polymer chain, these parameters becoming independent of the molecular weight for specimens with M > M_c within a series of polybutadienes of equal microtacticity. Thermomechanical investigations of polybutadienes also made it possible to define more accurately the boundaries of the crystallization region and the dependence of the melting point on the microtacticity. The results obtained are discussed on the basis of modern ideas of polymer structure.     

Heat transfer and fluid flow of pseudo-plastic nanofluid over a moving permeable plate with viscous dissipation and heat absorption/generation

Journal of Thermal Analysis and Calorimetry - The purpose of the present study is investigating the heat transfer of non-Newtonian pseudo-plastic nanofluid flow on a moving permeable flat plate...     

Structure and rheological properties of PVC melts

The Theological properties of PVC compounds reflect the state of the flow units. The steady state structure which may be found in PVC melts is predicted to depend on the interaction of stresses in simple flow and temperatures for transition from rubberlike solid to liquid state and transition from a liquid state containing crystallite aggregates to a liquid state without crystallite aggregates, called the gel destruction temperature T_d and the dynamic melting temperature T^dyn_m, respectively. The model predictions for T_d and T^dyn_m are compared with experimental data.     

Thermal and rheological properties of gelatin-dextran hydrogels

Hydrogels prepared by crosslinkage of gelatin with dextran dialdehyde have been characterized by dynamic shear oscillation measurements at small strain. Isothermal as well as temperature scan measurements were performed. The results obtained demonstrated that the final polymer network is a result of a chemical gelatin-dextran dialdehyde interaction as well as a gelatin-gelatin (physical association) and a polymer-solvent interaction. This balance is strongly dependent on the composition of the system, the polymer concentration, the storage temperature and the storage time.We found that a short cryogenic treatment at –20°C of physically structured gels, significantly increases the chemical crosslinkage. DSC measurements at low cooling rate confirm these results and demonstrate a chemical reaction enthalpy contribution.This work was supported by the Flemish Institute for Science and Technology (IWT) and the Belgian Government (PAI-III-40).The authors also express their gratitude to Systèmes Bio Industries Benelux for providing free samples of well characterized gelatin.     

Experimental analysis of heat transfer behavior of silver,MWCNT and hybrid (silver +MWCNT) nanofluids in a laminar tubular flow

Journal of Thermal Analysis and Calorimetry - Experimental investigations were carried out in order to study the heat transfer performance of silver (Ag), multiwalled carbon nanotubes (MWCNT) and...     

Investigation of MHD effect on nanofluid heat transfer in microchannels

Journal of Thermal Analysis and Calorimetry - An incompressible preconditioned lattice Boltzmann method (IPLBM) is proposed to investigate the fluid flow and heat transfer characteristics of...     

Influence of MWCNT morphology on dispersion and thermal properties of polyethylene nanocomposites

In this study a series of multi-walled carbon nanotube (MWCNT)/Polyethylene (PE) composites with different kinds and several concentrations of carbon nanotubes (CNTs) were investigated. The morphology and degree of dispersion of the fillers in the polymer matrix at different length scales was investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Both individual and agglomerated MWCNTs were evident but a good dispersion was observed for some of them. TGA measurements were performed on nanocomposites in order to understand if CNTs affect the stabilization mechanism during thermal and oxidative degradation. The analysis demonstrates that MWCNTs presence slightly delays thermal volatilisation (15-20 °C) without modification of thermal degradation mechanism. In contrast, thermal oxidative degradation in air is delayed up to about 100 °C dependently from MWCNTs concentration, in the range used here (0.1-2.0 wt%), and degree of dispersion. The stabilization is due to the formation of a thin protective layer of entangled MWCNTs kept together by carbon char generated on the surface of the nanocomposites as shown by SEM images taken on degradation residues.     

On rheological properties of polydisperse polymers

An investigation has been carried out into the effect of the fractional composition on the rheological (flow and elastic) properties of a system, using mixtures of polybutadienes with narrow molecularweight distribution (MWD). For mixtures of high-molecular-weight components, the initial Newtonian viscosity is determined by the weight-average molecular weight: $\text{η}{}_0\text{～}\text{M}{}^{\mathrm{\alpha }}{}_{\mathrm{<mtext>w</mtext>}}$; when low-molecular weight components are introduced, it is also determined by the MWD moment ratio. The characteristic relaxation time of a system is determined by the z-average molecular weight: , and in the general case α₁ ≠ α. A new model has been proposed to explain the non-Newtonian phenomenon as a consequence of the existence of a molecular-weight distribution. According to this model, as the shear rate increases the high-molecular-weight components gradually (at their critical rates) pass over to the high-elastic state. Therefore, at high shear rates, their contribution to viscous losses of a polydisperse polymer is associated with their behaviour as a viscoelastic filler in a viscous liquid.     

Some rheological properties of molten polypropylene

The following measurements were carried out on the melts of two samples of polypropylene, one with a narrow and one with a broad molecular weight distribution: viscosity in steady shear flow, dynamic storage and loss moduli, total normal thrust in cone-and-plate apparatus, and flow birefringence. The validity of various theoretical interrelations between the measured quantities is checked. The influence of molecular weight distribution is qualitatively discussed.     

Viscoelastic and rheological properties of syndiotactic 1,2-polybutadiene

The physicomechanical, viscoelastic, and rheological characteristics of syndiotactic 1,2-polybutadiene were studied and compared with those of the analogs produced in other countries.