Thermal behaviour of a modified encapsulation agent

Thermal behaviour of heptakis-6-iodo-6-deoxy-beta-cyclodextrin (HIDBCD) under inert and oxidative conditions was investigated by TG/DTG/DTA, FTIR, and using the hyphenate technique TG–FTIR. Due to the fact that thermal behaviour of HIDBCD was not studied before, we set our goal in the investigation of thermal degradation process in a dynamic air atmosphere vs. nitrogen atmosphere at a heating rate of 10 °C min^?1, up to 500 °C, respectively, 600 °C. It was found that the degradation process in air occurs in a single step, with a total mass loss of 99.9 %. The results of TG/DTG/DTA–FTIR indicated that the thermal behaviour of this cyclodextrin can be divided into three stages and more information was provided about the reaction sequences and the relevant products of reaction.     

A novel high efficiency benzophenone based polymeric photoinitiator from ring-opening polymerization of benzoxazine

A novel polymeric photoinitiator based on benzoxazine was synthesized by introducing 4-hydroxy benzophenone, diglycolamine and paraformaldehyde into the macromolecular chain. Its molecular structure was characterized by ¹H NMR, FTIR, and UV-Vis spectroscopy. Photopolymerization of tripropylene glycol diacrylate and trimethylolpropane triacrylate initiated by polybenzoxazine, benzoxazine, and benzophenone was studied by real time FTIR spectroscopy. The results obtained are discussed.     

Thermal decomposition study of HAuCl4·3H2O and AgNO3 as precursors for plasmonic metal nanoparticles

Thermal decomposition of HAuCl₄·3H₂O and AgNO₃, as precursors for Au and Ag nanoparticles, respectively, was monitored by coupled TG–DTA with TG/EGA–FTIR and EGA–MS techniques in a flowing 80 %Ar + 20 %O₂ and Ar atmospheres in the temperature range of 30–600 °C. The intermediate and final products of thermal decomposition were analysed by ex situ XRD and FTIR techniques. The thermal degradation of HAuCl₄·3H₂O starts immediately after melting at 75 °C and takes place in three steps in the temperature range of 75–320 °C with total mass loss of 49.4 and 49.7 % in artificial air and Ar atmospheres, respectively. EGA by MS and FTIR revealed a simultaneous release of H₂O and HCl in the temperature range of 75–235 °C. EGA by MS revealed a release of Cl₂ at around 225 °C and in the interval of 250–320 °C. According to the XRD analysis, the main solid product in the end of the first decomposition step at 190 °C is AuCl₃; in the end of the second decomposition step at 240 °C is AuCl and the final product at 320 °C is Au. The thermal decomposition of AgNO₃ takes place in a single step in the temperature range of 360–515 °C with a total mass loss of 39.0 and 37.8 % in flowing artificial air and Ar atmospheres, respectively. According to EGA–MS and EGA–FTIR the main evolved gases are NO₂, NO and O₂. The final product of the thermal decomposition at 600 °C is Ag irrespective of the atmosphere.     

Structural characterization and electrical conductivity studies of BaMoO4 nanofibers prepared by sol–gel and electrospinning techniques

Scheelite type BaMoO₄ nanofibers were prepared by using acrylamide assisted sol–gel process and electrospinning technique. The prepared Scheelite BaMoO₄ nanofibers were characterized by using TG/DTA, XRD, FTIR, FT-Raman and SEM–EDX techniques. Thermal behavior, crystalline phase and structure of the prepared BaMoO₄ nanofibers samples were confirmed from the analysis of the obtained results of TG/DTA, XRD, FTIR and FT-Raman respectively. SEM micrographs along with EDX showed the formation of one dimensional (1D) nanofibers 100–350 nm diameters and existence of Ba, Mo and O elements in the BaMoO₄ nanofibers sample. The electrical conductivity of BaMoO₄ nanofibers as a function of temperature 200–400 °C under air was evaluated by analyzing the measured impedance data using the winfit software. The newly prepared Scheelite type BaMoO₄ nanofibers showed electrical conductivity of 0.92 × 10^?3 S/cm at 400 °C.     

Crystallization behavior,tensile behavior and hydrophilicity of poly(vinylidene fluoride)/poly(vinyl pyrrolidone) blends

Binary polymer blends of hydrophobic poly(vinylidene fluoride) (PVDF) and hydrophilic poly(vinylpyrrolidone) (PVP) were prepared by melt blending. The crystallization behavior, mechanical properties and hydrophilicity of the binary blends were investigated using Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffractometry (WAXD), differential scanning calorimeter (DSC) scanning, non-isothermal crystallization kinetics, successive self-nucleation and annealing (SSA) fractionation, tensile tests and contact angle tests. The analysis of FTIR, WAXD, DSC scanning, non-isothermal crystallization kinetics and SSA fractionation showed that the addition of PVP greatly influenced the crystallization behavior of the sample. As the PVP content increased, the crystallization temperature, crystallization rate, degree of crystallinity, and the amount of thick lamellaes decreased gradually. Meanwhile, PVP favored the formation of β-phase of PVDF. The results of tensile test revealed that the addition of PVP increased the elongation at break of the sample, and lowered the yield stress. Besides, the result of contact angle test indicated that the hydrophilicity of PVDF was remarkably improved in the presence PVP. The relationship between crystallization behavior and the tensile behavior, hydrophilicity were discussed.     

Characterization of chitosan microparticles reinforced cellulose biocomposite sponges regenerated from ionic liquid

The chitosan-microparticles reinforced cellulose biocomposite sponges regenerated from ionic liquid were prepared and characterized. Fourier transform infrared (FTIR) spectroscopy confirmed that the cellulose dissolved in 1-allyl-3-methylimidazolium chloride without derivatization. Chitosan particles as reinforcement were incorporated into the cellulose matrix. FTIR spectra indicated hydrogen bonding between hydroxyl groups of cellulose and chitosan. The biocomposite sponges showed uniform three-dimensional interconnected porous structures. The breaking strength of the sponges increased significantly, from 0.09 to 0.32 MPa with the addition of 1.0 wt% chitosan. The sponges also demonstrated excellent antibacterial activity against S. aureus and E. coli with the average inhibition zone diameters >2 mm and the inhibition rate higher than 80 %. Furthermore, the biocomposite sponges exhibited good moisture penetrability and high porosity. The water uptake ability of the sponge was >25 times of its weight in water with a fast swelling. The chitosan/cellulose composite sponge is expected to be a promising material for potential applications as wound dressing.     

Functionalization of cellulose with epoxy groups via γ-initiated RAFT-mediated grafting of glycidyl methacrylate

Glycidyl methacrylate (GMA), was grafted from cellulose by the combination of radiation-induced initiation and the reversible addition-fragmentation chain transfer (RAFT) polymerization technique, leading to epoxy functionalized surfaces that enable further modifications. Cumyl dithiobenzoate and 2-cyanoprop-2-yl dithiobenzoate were employed as the RAFT agents. The effects of absorbed dose, monomer and RAFT agent concentrations and solvent choice on grafting yield were investigated. Characterization of the synthesized copolymers by ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, thermal analysis and contact angle measurements revealed the grafting of poly(glycidyl methacrylate) (PGMA) from cellulose. Size-exclusion chromatography analysis indicated the difficulty of controlling the polymerization of GMA due to branching and/or crosslinking reactions that might occur in PGMA structure under γ-radiation.     

Facile formation of stimuli-responsive,fluorescent and magnetic nanoparticles based on cellulose stearoyl ester via nanoprecipitation

In comparison to stimuli-responsive, multi-functional nanoparticles (NPs) from synthetic polymers, such NPs based on sustainable, naturally occurring polysaccharides are still scarce. In the present study, stable stimuli-responsive, fluorescent and magnetic NPs were fabricated using cellulose stearoyl esters (CSEs) consisting of cellulose and stearoyl groups. The multifunctional NPs with the average diameters between 80 and 250 nm were obtained after facile nanoprecipitation using CSE solutions containing Fe₃O₄-NPs. Using the aqueous solution of fluorescent rhodamine B as precipitant, NPs with rhodamine B on NP surface were obtained. Rhodamine B could be released depending on the temperature. In comparison, stearoylaminoethyl rhodamine B can be encapsulated in CSE-NPs, which renders obtained NPs reversible fluorescence in response to UV illumination and heat treatment.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

Preparation of Cu (II)/PEI–QPEI/SiO2 nanopowder as antibacterial material

The silica nanoparticles were prepared by the sol–gel process, and then twice modified and grafted by polyethylenimine (PEI) on their surface. After quaternary ammonium reaction and chelated copper reaction, the PEI/SiO₂, QPEI/SiO₂, PEI–QPEI/SiO₂ and Cu (II)/PEI–QPEI/SiO₂ nanopowders were obtained in turn. The morphology and structure of the products were characterized through SEM, EDX, HRTEM, FTIR and element analysis. At the same time, the antibacterial activity of the products to E. coli and Candida were evaluated through quantification and qualitative ways, e.g. microcalorimetric method and culture dish method. The results suggested that the Cu (II)/PEI–QPEI/SiO₂, a novel three-component functional nanopowder, presented the best antibacterial activity to both E. coli and Candida duo to the synergistic sterilization capability of the ammonium salt and copper ions, compared with other products. It indicated that the Cu (II)/PEI–QPEI/SiO₂ nanopowder could be a novel antibacterial nanomaterial to widely application in preventing and minimizing bacteria of the organism and environment in future.     

Thermal decomposition of polymethylmethacrylate synthesized with anionic catalysts

TG and DTA data are used to show that the thermal decomposition of polymethylmethacrylate (PMMA) synthesized with anionic catalysts depends on the nature of the catalyst. It is found that the thermal stability of PMMA obtained by using anionic amide catalysts is higher than that of radical PMMA and of PMMA obtained with other anionic catalysts, and depends on the temperature of polymerization and on the molecular weight of the polymer.     

Isolation and Immobilization of Influenza Virus-Specific N-SA-α-2,3-Gal Receptors Using Magnetic Nanoparticles Coated with Chitosan and Maackia amurensis Lectin

Avian influenza viruses preferentially bind to sialic acid alpha-2,3-galactose (N-SA-α-2,3-Gal) receptors on epithelial cells. Herein, we describe a procedure we have developed for isolation of N-SA-α-2,3-Gal receptors from porcine trachea using magnetic nanoparticles (NPs) coated with chitosan (NP-Ch) and functionalized with Maackia amurensis lectin (NP-lectin). Magnetic nanoparticles were coated with chitosan in a one-step co-precipitation, and then M. amurensis lectin was immobilized covalently using glutaraldehyde. Lectin coated nanoparticles were incubated with sialic acid enriched fraction of tracheal homogenate, and N-SA-α-2,3-Gal receptor was extracted under magnetic field in two cycles. The presence of 66.4 kDa protein was determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The interaction of immobilized receptor (NP-Ch-R) with M. amurensis lectin (NP-Ch-R-L) was demonstrated by Fourier transform infrared spectrometry (FTIR) and thermogravimetric analysis (TGA).     

Synthesis of nanosized BaZrO3 from oxalate precursor

Nanosized barium zirconate (BaZrO₃) is prepared from its oxalate precursor, barium zirconyl oxalate (BZO). The decomposition of BZO precursor was studied by thermogravimetry, differential thermal analysis, fourier transform infra red spectroscopy (FTIR), and X-ray diffraction (XRD) techniques. FTIR and XRD study reveals that BZO precursor calcined at 1173 K for 2 h gives nanosized perovskite type cubic BaZrO₃ powder. The transmission electron microscope study shows that BaZrO₃ particles prepared at 1173 K is nearly spherical in shape with diameter of 40–75 nm. Particle size study was carried out to investigate particle size distribution of BaZrO₃ particles. Band gap of BaZrO₃ was estimated from UV–visible spectroscopy data. Impedance measurement study shows that dielectric constant of BaZrO₃ prepared in this work is 31.69 at 10 kHz.     

A new method for preparation of magnetic polymer particles

Synthesis of magnetic polymer particles (MPP) was carried out through two steps. Firstly, the iron oxide particles carrying vinyl groups were synthesized, and in the second step, styrene (ST), divinyl benzene (DVB), and 2-hydroxyethyl methacrylate (HEMA) were polymerized on the surface of modified iron oxide through an emulsifier-free emulsion polymerization technique. The final particles were characterized by a Fourier transform infrared spectroscopy (FTIR), Fourier transform infrared attenuated total reflectance spectroscopy (FTIR-ATR), X-ray diffractometer (XRD), thermal gravimetry analysis (TGA), Fritsch particle sizer, scanning electron microscope (SEM), and vibrating sample magnetometer (VSM). Experimental analysis confirmed that all the iron oxide particles were embedded in a polymer phase and the final particles have more than 67 % iron oxide content. According to magnetometry data, the shape of the hysteresis loops evidences the ferromagnetic character of the particles.     

Polyoxotungstate nanoclusters supported on silica as an efficient solid-phase microextraction fiber of polycyclic aromatic hydrocarbons

A highly porous silica-supported tungstophosphoric acid (PW) nanocluster was prepared for use in solid-phase microextraction (SPME) of polycyclic aromatic hydrocarbons (PAHs). The PWs represent a class of discrete transition metal-oxide nanoclusters and their structures resemble discrete fragments of metal-oxide structures of definite size and shape. Transition metal-oxide nanoclusters display large structural diversity, and their monodisperse sizes can be tuned from several Ångstroms up to 10 nm. The highly porous silica-supported tungstophosphoric acid nanocluster material is found to be capable of efficiently extracting PAHs from aqueous sample solutions. The nanomaterial was immobilized on a stainless steel wire for fabrication of the SPME fiber. Following thermal desorption, the PAHs were quantified by GC-MS. Analytical merits include limits of detection that range from 0.02 to 0.1 pg mL^?1 and a dynamic range as wide as from 0.001 to 100 ng mL^?1. Under optimum conditions, the repeatability for one fiber (n?=?3), expressed as the relative standard deviation, is between 4.3 % and 8.6 %. The method is simple, rapid, and inexpensive. The thermal stability of the fiber and the high relative recovery make this method superior to conventional methods of extraction.

The highly porous silica-supported tungstophosphoric acid nanocluster material is found to be capable of efficiently extracting PAHs from aqueous sample solutions. The prepared nanomaterial was immobilized onto a stainless steel wire for fabrication of the SPME fiber. Following thermal desorption, the PAHs were quantified by GC-MS.     

The Effect of O6+ and Si7+ ion beam irradiations on poly(lactide-co-glycolide) (50: 50) copolymer

Sterilization by ion beam radiations unfortunately also has a significant effect on the degradation of many polymers. The aim of present study is to examine the effect of heavy ion beam irradiation on poly(lactide-co-glycolide) (PLGA) (50: 50). The radiation effect is manifested through its degradation behavior and changes in the morphological, optical and structural properties. PLGA films are prepared by solvent casting method and subsequently irradiated with swift heavy ions O⁶⁺ and Si⁷⁺ ion with fluence in the range of 5 × 10¹⁰?1 × 10¹² ions/cm². The dominant effect on PLGA films is chain scission as evidenced by change in surface modification. Changes in optical and structural properties were analyzed by UV-Vis, XRD and FTIR spectrometric techniques. XRD technique is not responsive to degradation occurring in samples. Surface modifications caused by ion irradiations have been observed with SEM.     

Quantitative characterization by asymmetrical flow field-flow fractionation of IgG thermal aggregation with and without polymer protective agents

Complexes formed between poly(acrylates) and polyclonal immunoglobulin G (IgG) in its native conformation and after heat stress were characterized using asymmetric flow field-flow fractionation (AF4) coupled with on-line UV-Vis spectroscopy and multi-angle light-scattering detection (MALS). Mixtures of IgG and poly(acrylates) of increasing structural complexity, sodium poly(acrylate) (PAA), a sodium poly(acrylate) bearing at random 3 mol % n-octadecyl groups, and a random copolymer of sodium acrylate (35 mol %), N-n-octylacrylamide (25 mol %) and N-isopropylacrylamide (40 mol %), were fractionated in a sodium phosphate buffer (0.02 M, pH 6.8) in the presence, or not, of 0.1 M NaCl. The AF4 protocol developed allowed the fractionation of solutions containing free poly(acrylates), native IgG monomer and dimer, poly(acrylates)/IgG complexes made up of one IgG molecule and a few polymer chains, and/or larger poly(acrylates)/IgG aggregates. The molar mass and recovery of the soluble analytes were obtained for mixed solutions of poly(acrylates) and native IgG and for the same solutions incubated at 65 °C for 10 min. From the combined AF4 results, we concluded that in solutions of low ionic strength, the presence of PAA increased the recovery ratio of IgG after thermal stress because of the formation of electrostatically-driven PAA/IgG complexes, but PAA had no protective effect in the presence of 0.1 M NaCl. Poly(acrylates) bearing hydrophobic groups significantly increased IgG recovery after stress, independently of NaCl concentration, because of the synergistic effect of hydrophobic and electrostatic interactions. The AF4 results corroborate conclusions drawn from a previous study combining four analytical techniques. This study demonstrates that AF4 is an efficient tool for the analysis of protein formulations subjected to stress, an important achievement given the anticipated important role of proteins in near-future human therapies. ?      

Heat of reaction and curing of epoxy resin

The heat of reaction and kinetics of curing of diglycidyl ether of bisphenol-A (DGEBA) type of epoxy resin with catalytic amounts of ethylmethylimidazole (EMI) have been studied by differential power-compensated calorimetry as a part of the program for the study of process monitoring for composite materials. The results were compared with those from 1∶1 and 1∶2 molar mixtures of DGEBA and EMI. A method of determination of heat of reaction from dynamic thermoanalytical instruments was given according to basic thermodynamic principles. The complicated mechanism, possibly involving initial ionic formation, has also been observed in other measurements, such as by time-domain dielectric spectroscopy. The behavior of commercially available DGEBA resin versus purified monomeric DGEBA were compared. The melting point of purified monomeric DGEBA crystals is 41.4 °C with a heat of fusion of 81 J/g. The melt of DGEBA is difficult to crystallize upon cooling. The glass transition of purified DGEBA monomer occurs around ?22 °C with aΔC _p of 0.60 J/K/g.