The thermodynamic properties of bis(η<Superscript>6</Superscript>-ethoxybenzene)chromium fulleride from <Emphasis Type="Italic">T</Emphasis> → 0 to 340 K

The temperature dependence of the heat capacity of crystalline bis-(η⁶-ethoxybenzene)chromium fulleride [(η⁶-(EtOPh))₂Cr]^·+[C₆₀]^·− was studied for the first time by adiabatic vacuum calorimetry over the temperature range 6–340 K with errors of ±0.2%. The temperature dependence of the EPR signal parameters of bis-(η⁶-ethoxybenzene)chromium fulleride was studied for the first time from 120 to 340 K. A reversible endothermic transformation was observed between 160 and 250 K during heating; it was caused by the dissociation of the [(C₆₀)₂]²⁻ dimer and the formation of the [(η⁶-(EtOPh))₂Cr]^·+[C₆₀]^·− fulleride; its standard thermodynamic characteristics were estimated and analyzed. The experimental data were used to calculate the standard thermodynamic functions, including the heat capacity, enthalpy, entropy, and Gibbs function of the fulleride dimer from T → 0 to 160 K and the [(η⁶-(EtOPh))₂Cr]^·+[C₆₀]^·− monomeric complex over the temperature range 250–340 K. The standard thermodynamic properties of the fulleride studied, fullerides studied earlier, and fullerite C₆₀ were compared.     

Generation of <Emphasis Type="Italic">tert</Emphasis>-Butyl-<Emphasis Type="Italic">λ</Emphasis><Superscript>5</Superscript>-phosphanedione and Its Chemical Properties

Flash vacuum thermolysis of trimethylsilyl tert-butylphosphonohalidates involved elimination of halo(trimethyl)silane with the formation of tert-butyl-λ⁵-phosphanedione whose structure was confirmed by chemical reactions. tert-Butyl-λ⁵-phosphanedione readily undergoes trimerization, reacts with 2-phenyloxirane to give cycloaddition product, and takes up alcohols.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

New “s<Emphasis Type="Italic">p</Emphasis><Superscript><Emphasis Type="Italic">2</Emphasis></Superscript>-bonded” carbanucleosides

By reaction of 2,3-dichloro-, 2,3,5-trichloro-, 2,5-dichloro-3-phenylsulfonyl-, 2-chloro-3-phenylsulfonyl-4,4-ethylenedioxycyclopent-2-en-1-ones with uracyl 3- and 2-uracyl derivatives were obtained of the corresponding chlorocyclopentenone.     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.     

X-ray and computational structural study of neutral <Emphasis Type="Italic">bis</Emphasis>(<Emphasis Type="Italic">N,N,N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-tetramethylthiophosphoramidoyl)-methylamine

The structure of bis(N,N,N′,N′-tetramethylthiophosphoramidoyl)-methylamine 1 has been determined by single-crystal X-ray diffraction. The compound 1 crystallizes in the monoclinic system, with a space group P2₁/c, a = 11.836(2) Å, b = 11.659(2) Å, c = 12.796(5) Å and β = 95.28(3)°, V = 1758.3(5) Å³ and Z = 4. The X-ray crystallographic data have been assessed by semi-empirical and ab-initio density functional theory and by Hartree–Fock molecular orbital methods. A comparative study of the results of the different methods is given.     

Kinetics of thermal reaction HOCl ⇄ H(<Superscript>2</Superscript><Emphasis Type="Italic">S</Emphasis>) + OCl(<Emphasis Type="Italic">X</Emphasis><Superscript>2</Superscript>Π<Subscript><Emphasis Type="Italic">i</Emphasis></Subscript>) in gas phase

The kinetics of gas reaction \(HOCl\underset{{k_r }}{\overset{{k_f }}{\longleftrightarrow}}H(^2 S) + OCl(X^2 \Pi _i )\) was analyzed by the MP4 method. In the temperature range of 100–373 K the rate constants k _f and k _r and equilibrium constant K were changed from 1.10 × 10^?220 to 1.17 × 10^?52 s^?1, from 2.89 × 10^?16 to 1.68 × 10^?5s^?1 and from 3.80 × 10^?205 to 6.96 × 10^?48 respectively. In the above temperature range, the activation energy of the forward reaction (E _f) is 105.05 kcal/mol. In the same temperature interval there are two kinetic domains for the reverse reaction with activation energies (E _r1 = 5.53 kcal/mol when T is 100–273 K and E _r2 = 14.50 kcal/mol when T is 273–373 K, respectively.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-nitro-<Emphasis Type="Italic">N</Emphasis>′-(trimethylsilyl)carbodiimide

Nitration of N,N′-bis(trimethylsilyl)carbodiimide with N₂O₅ or (NO₂)₂SiF₆ afforded N-nitro-N´-(trimethylsilyl)carbodiimide, the first representative of N-nitro carbodiimides. Its further nitration led to the release of CO₂, which is presumably formed in the course of N,N´-dinitrocarbodiimide decomposition. The reactions of N-nitro-N´-(trimethylsilyl)carbodiimide with nucleophiles take place both at the tri methylsilyl group (for example, with NH₃) to give nitrocyanamide salts and at the carbodiimide C atom (for example, with Et₂NH) to give the corresponding nitroguan idines.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

Synthesis of <Emphasis Type="Italic">α</Emphasis>-chloropyridine derivatives of <Emphasis Type="Italic">γ</Emphasis>-aminobutyric acid

The sodium salt of N-(6-chloronicotinoyl)-γ-aminobutyric acid, a structural analog of the known nootropic and vasidilating drug picamilon, was synthesized via Schotten–Baumann acylation of γ-aminobutyric acid with 6-chloronicotinoyl chloride and subsequent neutralization of the N-(6-chloronicotinoyl)-γ-aminobutyric acid that was obtained in >60% yield.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

Cu<Superscript>I</Superscript>-catalyzed <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’-diarylation of diamines of adamantane series

A copper(I) complex-catalyzed N,N’-diarylation of diamines based on 1,3-disubstituted adamantane, using aryl iodides bearing electron-donating and electron-withdrawing substituents, was studied. In the case of 2,2’-(adamantane-1,3-diyl)ethanediamine, the optimal catalyst system is CuI—2-(isobutyryl)cyclohexanone—Cs₂CO₃—DMF. The highest yield of diarylation product was reached in the case of 4-methoxyiodobenzene (79%). In the case of more spatially hindered adamantane-1,3-diyldimethanamine, 1,1’-binaphthalene-2,2’-diol (BINOL) should be used, with the highest yield of the target product (84%) being reached in the reaction with iodobenzene.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.     

An efficient synthesis of <Emphasis Type="Italic">β</Emphasis>-methoxycarbonyl-<Emphasis Type="Italic">γ</Emphasis>-butyrolactones

β-Methoxycarbonyl-γ-butyrolactones bearing a γ-aromatic substituent were prepared via copper-catalyzed reductive aldol addition/lactonization domino reactions of ketones with α,β-unsaturated dicarboxylate esters and a silane under ambient temperature. The reaction has advantage of using readily available reagents, mild conditions and high efficiency.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

First example of the synthesis of <Emphasis Type="Italic">S</Emphasis>,<Emphasis Type="Italic">O</Emphasis>-macroheterocycle based on 2(5<Emphasis Type="Italic">H</Emphasis>)-furanone and 2,2´-oxydiethanethiol

A base-catalyzed reaction of 3,4-dichloro-5-methoxy- and 3,4-dichloro-5-ethoxy-2(5H)-furanones with 2,2´-oxydiethanethiol gave thiols and bis-thioethers of 2(5H)-furanone series. A new S,O-macroheterocyclic compound containing a 18-membered oxathiamacrocycle and two 2(5H)-furanone fragments was synthesized based on the thiols in an aqueous solution of potassium hydroxide, which was characterized by X-ray diffraction.     

Pseudo-Polymorphs of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-Bis(4-nitrophenyl)-2,6-Pyridinedicarboxamide

Three pseudo-polymorphs of N, N′-bis(4-nitrophenyl)-2,6-pyridinedicarboxamide 1 were characterized by X-ray crystallography. The C–H ⋅s O hydrogen bond was found to contribute significantly to the assembly of this host. With the variation of the guest, the host changed the molecular conformation and the supramolecular synthons. In all three cases concerned, the solvent guests were bonded through direct host-guest interaction and accommodated in the voids formed by the assembly of the host.