吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒的制备及其性质研究

以蛋白质或多肽修饰的吲哚类菁染料Cy3为内核, 采用实验条件简单的油包水反相微乳液方法成核, 通过正硅酸乙酯水解形成的网状二氧化硅包壳的方法制备吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒. 考察了以不同等电点的蛋白质和多肽修饰的Cy3为内核材料对吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒制备的影响. 结果表明, 分别采用人免疫球蛋白(IgG)或多聚赖氨酸修饰的Cy3为内核材料, 都能制备荧光强度高、荧光稳定性强和染料泄漏极少的Cy3嵌入的核壳荧光纳米颗粒. 进一步对Cy3嵌入的核壳荧光纳米颗粒进行了表征, 并将基于这一新型的荧光纳米颗粒建立起来的生物标记方法初步应用于流感病毒DNA的检测, 其检测线性范围为3.18×10-10～1.27×10-9 mol/L, 检测下限为3.51×10-10 mol/L, 相关系数r为0.986 5.     

Organically modified silica nanoparticles co-encapsulating photosensitizing drug and aggregation-enhanced two-photon absorbing fluorescent dye aggregates for two-photon photodynamic therapy

We report energy-transferring organically modified silica nanoparticles for two-photon photodynamic therapy. These nanoparticles co-encapsulate two-photon fluorescent dye nanoaggregates as an energy up-converting donor and a photosensitizing PDT drug as an acceptor. They combine two features: (i) aggregation-enhanced two-photon absorption and emission properties of a novel two-photon dye and (ii) nanoscopic fluorescence resonance energy transfer between this nanoaggregate and a photosensitizer, 2-devinyl-2-(1-hexyloxyethyl)pyropheophorbide. Stable aqueous dispersions of the co-encapsulating nanoparticles (diameter < or = 30 nm) have been prepared in the nonpolar interior of micelles by coprecipitating an organically modified silica sol with the photosensitizer and an excess amount of the two-photon dye which forms fluorescent aggregates by phase separation from the particle matrix. Using a multidisciplinary nanophotonic approach, we show: (i) indirect excitation of the photosensitizer through efficient two-photon excited intraparticle energy transfer from the dye aggregates in the intracellular environment of tumor cells and (ii) generation of singlet oxygen and in vitro cytotoxic effect in tumor cells by photosensitization under two-photon irradiation.     

新型有机荧光染料嵌合的核壳荧光纳米材料的研制

采用油包水的反相微乳液方法,首次以羊抗人免疫球蛋白(IgG)标记的异硫氰酸荧光素(FITC)为核材料,成功地制备了FITC的核壳荧光纳米颗粒,克服了采用传统方法制备核壳荧光纳米颗粒中存在的荧光染料泄露的问题.制备的这种核壳荧光纳米颗粒比细胞小很多,且具有生物亲和性,可为纳米生物传感器件提供新型材料.基于该核壳荧光纳米颗粒的标记方法也为生物医学提供了一种新型的非同位素分析方法.     

Iron Oxide Nanoparticles Labeled with an Excited‐State Intramolecular Proton Transfer Dye

Excited‐state intramolecular proton transfer (ESIPT) is a particularly well known reaction that has been very little studied in magnetic environments. In this work, we report on the photophysical behavior of a known ESIPT dye of the benzothiazole class, when in solution with uncoated superparamagnetic iron oxide nanoparticles, and when grafted to silica‐coated iron oxide nanoparticles. Uncoated iron oxide nanoparticles promoted the fluorescence quenching of the ESIPT dye, resulting from collisions during the lifetime of the excited state. The assembly of iron oxide nanoparticles with a shell of silica provided recovery of the ESIPT emission, due to the isolation promoted by the silica shell. The silica network gives protection against the fluorescence quenching of the dye, allowing the nanoparticles to act as a bimodal (optical and magnetic) imaging contrast agent with a large Stokes shift.     

Fluorescence anisotropy in studies of solute interactions with covalently modified colloidal silica nanoparticles

Time-resolved anisotropy decays of a fluorescent cationic solute, rhodamine 6G (R6G), in Ludox sols were measured to characterize the extent of the ionic binding of the probe to silica particles after modification of the surface with neutral or cationic silane coupling agents. The anisotropy decays provided direct evidence for distribution of the dye between the aqueous solution (picosecond decay component) and silica particles (nanosecond decay component and residual anisotropy component, which were attributed to the wobbling motion of dye on the silica surface and to the ionically bound probe, respectively). The dye was strongly adsorbed to unmodified silica nanoparticles, to the extent that less than 1% of the dye was present in the surrounding aqueous solution. Significant decreases in the degree of probe adsorption were obtained upon covalent modification of the silica with neutral or cationic silanes, with up to 80% of the probe being present in the aqueous solution in cases where the surface was coated with (3-aminopropyl)triethoxysilane. The addition of such agents also altered the fractional distribution between the nanosecond decay component and the residual anisotropy component in favor of the nanosecond component, indicative of weaker interactions between the dye and the modified surface (i.e., more wobbling motion). The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the modification of silica surfaces and should prove useful in characterization of new chromatographic stationary phases.     

Siloxane-functionalized calix[4]pyrrole: synthesis, characterization and modification of silica-based solid supports

A siloxane-functionalized calix[4]pyrrole derivative was synthesized starting from the corresponding alcohol-functionalized calix[4]pyrrole. Structural elucidation was carried out by using NMR spectroscopy, mass spectrometry and X-ray diffraction analysis. The use of this siloxane-functionalized calix[4]pyrrole for modification of various silica solid supports (silica gel 60, fume silica, and SiO₂ nanopowder) was studied. Characterization of the modified silica solid supports was achieved by FTIR, TGA, and elemental analysis. It was also shown that the production of silica nanoparticles is possible via a sol-gel reaction of siloxane-functionalized calix[4]pyrrole and tetraethoxysilane (TEOS). Calix[4]pyrrole modified silica solid supports were found to sense chloride anions of Azure A dye.     

A fluorescence ratiometric nano-pH sensor based on dual-fluorophore-doped silica nanoparticles

We have synthesized dual-fluorophore-doped core-shell silica nanoparticles used as ratiometric pH sensor. The nanoparticles were prepared with a reverse microemulsion technique by simultaneously encapsulating two different fluorophores, the pH-sensitive dye fluorescein as a pH indicator and the pH-insensitive dye phenosafranine as an internal reference for fluorescence ratiometric measurement, into silica shell. The nanoparticles prevent the fluorescence dyes leaching from the silica matrix when immersed inside water. The hydrophilic silica shells were made by hydrolysing and polymerizing tetraethoxysilane (TEOS) in water-in-oil microemulsion. The fluorescence intensity ratio of the two dyes varied linearly as a function of pH in the range from 4.0 to 8.0. The sensor was also applied to measure pH of real water samples. The results are in good agreements with that using the conventional glass electrode method. The as-prepared fluorescent nanoparticles showed rapid response, excellent stability and high reproducibility as pH sensors.     

Effects of surfactant/water ratio and dye amount on the fluorescent silica nanoparticles

Effects of surfactant/water volume ratios and dye amounts on the properties of micelles and fluorescence silica nanoparticles were studied in microemulsions containing nonionic surfactant Triton X-100, hexanol as co-surfactant, cyclohexane as organic solvent, and metal organic dye (tris(2,2′-bipyridyl)dichlororuthenium) via fluorescence probe technique, TEM, and XPS. Fluorescence probe measurements show that the micelle microenvironment becomes stable at the surfactant/water volume ratio higher than 3.5 and the incubation time longer than 10 h. The data suggest that the silica shell, which is formed at the surfactant/water ratio of 3.5, yields an efficient protection of dye molecules against the e-beam irradiation and result in high photostability of fluorescent silica. We pioneered the localization of dye molecules on the surface of dye-doped silica and found that an increase of dye amounts, beyond a threshold, in the microemulsion cannot enhance the fluorescence intensity of dye-doped nanoparticles. These results are of significant importance for optimizing the synthesis of fluorescent nanoparticles with high photostability and low cost.     

Stöber synthesis of monodispersed luminescent silica nanoparticles for bioanalytical assays

We have developed a simple method to prepare bright and photostable luminescent silica nanoparticles of different sizes and narrow size distribution in high yield. The method is based on the use of St?ber synthesis in the presence of a fluorophore to form bright silica nanoparticles. Unlike micro-emulsion-based methods often used to prepare luminescent silica particles, the St?ber method is a one-pot synthesis that is carried out at room temperature under alkaline conditions in ethanol:water mixtures and avoids the use of potentially toxic organic solvents and surfactants. Our luminescent particles contained the transition metal complex tris(1,10-phenanthroline) ruthenium(II) chloride, [Ru(phen)3]Cl2. They showed higher photostability and a longer fluorescence lifetime compared to free Ru(phen)3 solutions. Leakage of dye molecules from the silica particles was negligible, which was attributed to strong electrostatic attractions between the positively charged ruthenium complex and the negatively charged silica. To demonstrate the utility of the highly luminescent silica nanoparticles in bioassays, we further modified their surface with streptavidin and demonstrated their binding to biotinylated glass slides. The study showed that digital counting of the luminescent nanoparticles could be used as an attractive alternative to detection techniques involving analogue luminescence detection in bioanalytical assays.     

功能化荧光素掺杂二氧化硅纳米粒子用于免疫层析试验

A simple but effective approach was developed to synthesize amino functionalized fluorescein isothiocyanate-doped silica nanoparticles based upon polycondensation of tetraethoxysilane. Organic dye molecule (fluorescein isothiocyanate) coupled with a silane coupling agent, 3-aminopropyltriethoxysilane, was incorporated into silica sphere through controlled hydrolysis and polymerization of tetraethoxysilane. The dye was connected with silica sphere through 3-aminopropyltriethoxysilane, which avoided the leakage of the dye. The cohydrolysis and polymerization of tetraethoxysilane and 3-aminopropyltriethoxysilane outside the surface of the silica sphere formed another thin silica shell with the functionalized amino groups on the surface. With amino groups on the surface, the nanoparticle surface was affluent in positive charges. The amino-functionalized nanoparticles were linked with mouse monoclonal antibody against hepatitis B virus surface antigen through electrostatic interaction to form fluorescence probes, which were tested by immunochromatographic assay using immunochromatography test strip. It was indicated that the fluorescence probe was suitable for immunoassay.     

有序介孔硅片粒子表面的修饰及其表征

采用溶胶-凝胶的方法制备了粒径在50~300nm,具有正六边形的介孔二氧化硅片,用1,6-己二异氰酸酯(hexamethylene diisocyanate,HDI)对有序介孔硅片粒子表面进行有机化修饰,使其表面接枝能够参与反应的N=C=O活性基团。用FTIR、热重分析、TEM等分析方法对修饰后的有序介孔硅片粒子进行了表征,以确定HDI接在了有序介孔硅片粒子的表面。     

Surface-functionalized fluorescent silica nanoparticles for the detection of ATP

The design of two-dyed fluorescent silica nanoparticles for ATP detection is presented. The indicator dye possesses a dipicolyl-amine (DPA) unit complexed with Zn(II) as a receptor function for ATP while a rhodamine derivative is used as the reference dye. The nanoparticles were fully characterized regarding analytical performance, morphology and cytocompatibility.     

不同功能化基团修饰的硅壳纳米颗粒分散性研究

采用反相微乳液体系中功能化基团同步修饰(油相修饰)以及反相微乳液制备纳米颗粒后再通过功能化基团后续修饰(水相修饰)的方法分别制备了纯硅壳纳米颗粒(SiNP)、氨基化硅壳纳米颗粒(NSiNP)、羧基化硅壳纳米颗粒(CSiNP)和聚乙二醇硅壳纳米颗粒(PSiNP). 通过沉降时间和离心速度观察了不同方法获得的不同功能化基团修饰的硅壳纳米颗粒在水中的分散及稳定性, 并采用激光粒度仪、透射电子显微镜对分散效果进行了分析. 结果表明, 采用同一修饰方法分别制备的纳米颗粒在水中的分散及稳定性顺序是CSiNP≥PSiNP>SiNP>NSiNP; 油相修饰法获得的CSiNP和PSiNP的分散性要优于水相修饰法获得的. PSiNP和CSiNP在Hela细胞表面的非特异性吸附非常小, 而NSiNP却显示了强烈的细胞非特异性吸附.     

Bacterial adhesion inhibition of the quaternary ammonium functionalized silica nanoparticles

Quaternary ammonium compounds have been considered as excellent antibacterial agents due to their effective biocidal activity, long term durability and environmentally friendly performance. In this work, 3-(trimethoxysilyl)-propyldimethyloctadecylammonium chloride as a quaternary ammonium silane was applied for the surface modification of silica nanoparticles. The quaternary ammonium silane provided silica surface with hydrophobicity and antibacterial properties. In addition, the glass surface which was coated with the surface modified silica nanoparticles presented bacterial growth inhibition activity. For comparison of bacterial growth resistance, hydrophobic silane (alkyl functionalized silane) modified silica nanoparticles and pristine silica nanoparticles were prepared. As a result of bacterial adhesion test, the quaternary ammonium functionalized silica nanoparticles exhibited the enhanced inhibition performance against growth of Gram-negative Escherichia coli (96.6%), Gram-positive Staphylococcus aureus (98.5%) and Deinococcus geothermalis (99.6%) compared to pristine silica nanoparticles. These bacteria resistances also were stronger than that of hydrophobically modified silica nanoparticles. It could be explained that the improved bacteria inhibition performance originated from the synergistic effect of hydrophobicity and antibacterial property of quaternary ammonium silane. Additionally, the antimicrobial efficacy of the fabricated nanoparticles increased with decreasing size of the nanoparticles.     

pH响应的介孔二氧化硅纳米颗粒的制备及可控释放

选择带负电荷且溶解度和分子结构对pH值非常敏感的聚丙烯酸作为封堵分子, 采用静电吸附的修饰方法, 制备了pH响应的MCM-41型介孔二氧化硅纳米颗粒. 利用高倍透射电子显微镜(TEM)、 X射线衍射(XRD)、 傅里叶变换红外光谱(FTIR)及比表面积分析等手段表征了介孔二氧化硅纳米颗粒的物理化学性质. 以联钌吡啶染料分子作为模式客体分子, 研究了pH调控下的模式客体分子在介孔二氧化硅纳米颗粒中的包裹及释放行为. 结果表明, 该介孔二氧化硅纳米颗粒对pH具有很好的响应性; 在近中性条件下, 带正电的二氧化硅纳米颗粒通过静电吸附作用吸附带负电的聚丙烯酸, 导致介孔封堵, 使包载的染料分子几乎无释放; 客体分子的释放率随着pH值的降低而升高, 当pH≤5时, 染料分子显著释放, pH=1时客体分子的释放率高达98％, 可以实现对包载客体分子的控制释放. 该pH响应的介孔二氧化硅纳米颗粒载体具有制备简便、 价格低廉和包载量大等优点, 有望应用于药物的控制释放.     

Dextran-coated silica nanoparticles for calcium-sensing

This article describes the synthesis and characterisation of fluorescent composite nanoparticles consisting of a silica core and a dextran shell. The silica core contains a rhodamine-based reference dye, which allows ratiometric measurements and the dextran shell is labelled with the Ca(2+)-sensitive dye Fluo-4. The nanoparticles have an average hydrodynamic diameter of 95 nm, good colloidal stability and show a 2.9-fold increase in fluorescence intensity upon binding to Ca(2+) ions. The apparent dissociation constant of K'(d) ≈ 520 nM is well suited for measurements in the physiological range.     

双重对象同时检测的新型荧光纳米粒子传感器的制备

报道了一种基于荧光共振能量转移理论合成的新型纳米粒子. 新型纳米粒子A中掺杂了由亲和素-生物素桥联并可发生荧光共振能量转移(FRET)的供体染料和受体染料; 新型纳米粒子B中只掺杂了供体染料. 在使用供体染料的特征激发波长同时激发纳米粒子A和B时, 纳米粒子A由于荧光共振能量转移而发射出受体染料的特征波长, 而纳米粒子B则只发射供体染料的特征波长. 这样, 在单一波长激发下, 可很容易地实现双重对象同时检测.     

Uniform silica nanoparticles encapsulating two-photon absorbing fluorescent dye

We have prepared uniform silica nanoparticles (NPs) doped with a two-photon absorbing zwitterionic hemicyanine dye by reverse microemulsion method. Obvious solvatochromism on the absorption spectra of dye-doped NPs indicates that solvents can partly penetrate into the silica matrix and then affect the ground and excited state of dye molecules. For dye-doped NP suspensions, both one-photon and two-photon excited fluorescence are much stronger and recorded at shorter wavelength compared to those of free dye solutions with comparative overall dye concentration. This behavior is possibly attributed to the restricted twisted intramolecular charge transfer (TICT), which reduces fluorescence quenching when dye molecules are trapped in the silica matrix. Images from two-photon laser scanning fluorescence microscopy demonstrate that the dye-doped silica NPs can be actively uptaken by Hela cells with low cytotoxicity.     

Rationally designed SERS active silica coated silver nanoparticles

A reproducible method for the successful silica coating of silver nanoparticles is reported. A selection of tri-functional reporter molecules were designed to allow controlled synthesis of silica shelled, dye coded, SERS active silver nanoparticles.     

Role of silica nanoparticles on network formation and properties in thermoset polycarbonate based nanocomposites

Nanocomposites based on thermoset polycarbonate and fumed silica nanoparticles were prepared by radical in situ polymerization. To avoid nanoparticle agglomeration, silica nanoparticles modified with a vinyl end capped silane agent were also used. The effect of silica particles and silica surface modification on the extent of polymerization and network density was evaluated. Silica nanoparticles reduced the amount of soluble oligomeric species forming during the diallyl carbonate polymerization and this was particularly pronounced in the case of modified silica. Nevertheless, the participation of surface modifier reactive groups to polymerization also caused a lower polycarbonate network density. SEM analysis showed that the proposed interfacial strategy was effective to control nanoparticle dispersion; no agglomeration phenomena were observed using modified silica. Nanocomposites preserved the polycarbonate stiffness while a toughness increase was recorded with the addition of neat silica. Particularly interesting was the effect of nanoparticles on the improvement of the abrasion resistance of the polycarbonate thus overcoming one of the drawback of this material.