Superheated water as chromatographic eluent for parabens separation on octadecyl coated zirconia stationary phase

In this study, the use of pure water at superheated temperatures, between 100 and 200 degrees C, as a mobile phase for RP separation is explored. Instrumental parameters, such as temperature, flow rate, preheating and cooling, have shown significant effects on the quality of the chromatographic peaks. The properties of superheated water as an eluent were investigated by observing the chromatographic behaviour of four parabens on a carbon-clad zirconia (ZR) phase with covalently bonded octadecyl groups. Results were compared with those obtained at 30 degrees C on a silica-based phase with octadecyl groups, using water and ACN as mobile phase. The optimized method was finally applied to analyse parabens in a commercial body cream.     

Silicalite as a stationary phase for HPLC

A molecular sieve known as Silicalite was used as the column packing for HPLC. Silicalite contains channels (or cavities) approximately 6 Å in diameter but, unlike most other molecular sieves, Silicalite is hydrophobic. The retention times of methyl ketones and substituted phenols containing n-alkyl groups increase with increasing chain length of the substituent. However, phenols with very bulky substituents appear to be excluded from the Silicalite channels and elute very quickly. Excellent separations were obtained for a number of compounds with only slight differences in chemical structure. These include phenol isomers with a primary- or secondary alkyl group, position isomers of substituted phenols, and aliphatic cis-trans isomers.     

Thermally-treated clay as a stationary phase in liquid chromatography

Spray-dried, spherical synthetic hectorite particles have been thermally-treated at 500 degrees C for 16 h and used as adsorbent materials in reversed-phase liquid chromatography. The retention of a 22 mono and disubstituted aromatic compounds was evaluated to study the retention mechanisms on the clay mineral. The retention of solutes on the thermally-treated clays was markedly different than that measured on octadecylsilica (ODS) columns under identical conditions, but remarkably similar to retention characteristics of the same solutes on porous graphitic carbon columns. The clay columns exhibit an enhanced selectivity over the ODS column in separation of nitroaromatic positional isomers. Under identical mobile phase compositions, a selectivity, alpha, of 7.15 between ortho- and para-dinitrobenzene isomers was measured on the clay column compared to a alpha of 1.04 on the ODS column.     

Calcium complex grease as a low-polarity stationary phase

Considerable and unexpected thermal stability has been found with a calcium complex hydrocarbon grease proposed as a non-polar stationary phase. Although the polarity is unsatisfactory, improved stability has been achieved by the addition of an antioxidant. The use of an antioxidant increased significantly the thermal stability of low-polarity hydrogenated Apiezon M, which has been reported as an acceptable non-polar basic stationary phase for use of high temperatures.     

HPLC separation of positional isomers on a dodecylamine-N, N-dimethylenephosphonic acid modified zirconia stationary phase

The chromatographic performance of a new zirconia stationary phase (DPZ) modified with dodecylamine-N,N-dimethylenephosphonic acid (DDPA) is studied by using positional isomers as probes. The DDPA modified zirconia via one phosphonic group has a polar inner-layer and a non-polar outer-layer on its surface. The alkyl chain of outer-layer provides the hydrophobic interaction, while the polar inner-layer that consists of an amine group and a free phosphonic group provided dipolar and ion-exchange/columbic repellent interaction sites. The effects of methanol content, ionic strength and pH of mobile phase on capacity factors of the solutes are studied in detail, and baseline separations of toluidine, nitroaniline, aminophenol, dihydroxybenzene, and nitrophenol isomers were achieved on the new zirconia stationary phase. In addition, retention mechanism of the isomers on the DDPA-modified zirconia stationary phase is also proposed.     

1-萘甲膦酸改性氧化锆固定相的反相色谱性能研究

采用Lewis酸碱吸附改性方法制备了1-萘甲膦酸改性氧化锆色谱固定相,通过元素分析、漫反射红外光谱等对该固定相的表面性质进行了表征;以中性含π电子化合物作探针,考察了以甲醇/水为流动相、在13±3℃的柱温下固定相的色谱性能和分离机理;考察了该新型固定相的稳定性。结果表明,1-萘甲膦酸改性氧化锆固定相呈现出明显的反相色谱特征,对苯同系物、稠环芳烃和芳香族硝基化合物具有较好的分离选择性。     

Modified Diatomaceous earth as a principal stationary phase component in TLC

Modified natural diatomaceous earth (DE) is a principal component of the stationary phase in normal thin-layer chromatography (TLC) applications and is mixed with commercial silica gel 60GF254 (Si-60GF254). Modification is carried out by flux calcination and refluxing with acid. Natural DE, modified DEs [flux calcinated (FC)DE and FCDE-I), and Si-60GF254 are characterized by scanning electron microscopy and Fourier-transform-IR spectroscopy. Particle size, specific surface area, pore distribution, pore volume, and surface hydroxyl group density parameters of materials are determined by various techniques. FCDE-I and Si-60GF254 are investigated for their usefulness in the stationary phase of TLC both individually and in composition. Commercially available red and blue ink samples are run on layers of Si-60GF254 and FCDE-I individually, and on various FCDE-I and Si-60GF254 mixtures. Butanol-ethanol-2M ammonia (3:1:1, v/v) and butanol-acetic acid-water (12:3:5, v/v) mixtures are used as mobile phases. The polarities of stationary phases decrease, and the retention factor (Rf) values of ink components increase when the FCDE-I content of the stationary phase increases. The properties of the stationary phase can be optimized by adding FCDE-I to Si-60GF254. This study may be useful in understanding both the systematic effects of stationary phase properties [e.g., specific surface area and surface hydroxyl group density, aOH(s)] and those of the mobile phase (e.g., polarity and acidity) on Rf values and the separability of components.     

Aqueous solution ofN-methylmorpholineN-oxide as a stationary liquid phase in steam chromatography

The retention of more than 70 voltatile organic compounds of different classes was studied by steam chromatography using aqueous solutions ofN-methylmorpholineN-oxide as the stationary liquid phase (SLP). The effects of temperature and composition of the mobile phase on the retention factors (k) for polar and nonpolar sorbates were elucidated. An unusual order of elution of aliphatic alcohols was noted, namely,tert-butyl alcohol <sec-butyl alcohol < isopentyl alcohol <isobutyl alcohol<isopropyl alcohol <n-pentyl alcohol <n-butyl alcohol <n-propyl alcohol <ethanol <methanol. The retention of cyclohexanol was longer than those of benzyl alcohol andn-hexyl alcohol. Nitrogen-containing compounds were selectively separated on the water-organic SLP studied. For example, the retention of aniline was much longer than those of its derivatives,N,N-dimethylaniline andN,N-diethylaniline, having higher boiling points. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1077–1084, June, 2000.     

Polyoxyethylene as the stationary phase in ion chromatography

The present article reviews the use of polyethylene glycol (PEG) or polyoxyethylene (POE) as the stationary phase for the separation of inorganic anions in ion chromatography and discusses about the retention mechanisms involved in the separation of anions on the novel stationary phases. PEG permanently coated on a hydrophobic stationary phase retained anions in the partition mode and allowed us to use high-concentration eluents because the retention of anions increased with increasing eluent concentration for most of the eluents. This situation was convenient to determine trace anions contained in seawater samples without any disturbance due to matrices. Chemically bonded POE stationary phases retained not only anions but also cations. Anions were retained in the ion-exchange mode, although POE chains possess no ion exchange sites. The retention behavior suggested that eluent cations could be trapped among multiple POE chains via ion-dipole interaction, and that the trapped cations worked as the anion-exchange sites. Anions could be separated using crown ether, i.e., cyclic POE, as the eluent additive with a hydrophobic stationary phase, where analyte anions were retained via electrostatic interaction with the eluent cation trapped on the crown ether.     

高分子手性固定相的研究进展

手性药物的应用对人类健康产生了深远影响。随着化学、材料、生命等学科的发展,人们对手性药物分离分析的研究日趋深入。色谱法在手性药物分离分析中得到了广泛应用,手性固定相的选择是实现手性色谱拆分的关键。以高分子材料作为手性固定相并对其进行衍生以优化手性分离性能是近些年的研究热点。本文介绍了近几年高分子手性固定相在手性分离中的研究进展,并对其发展前景进行了展望。     

Cellulose acetate as stationary phase in microcolumn LC

The retention characteristics of alkylbenzenes and polycyclic aromatic hydrocarbons (PAHs) have been examined in liquid chromatography on a microcapillary column packed with cellulose acetate. Particulate and fibrous cellulose acetate were used as the stationary phase. Fibrous cellulose diacetate was found to be of use as an alternative stationary phase for liquid chromatography, although the separation efficiency was low. The retention characteristics for planar PAHs were linearly correlated with the size of the molecules, but the retention behavior for alkylbenzenes and nonplanar PAHs was affected by exclusion. The retention order was strongly influenced by the addition of dimethylformamide or water to methanol in the mobile phase. The results suggested that the retention behavior is influenced by a slight change in the polymer matrix of cellulose acetate.     

Bile acids as stationary phase in liquid chromatography

Summary Bile acids chemically bonded onto aminopropylsilica have been employed as stationary phases in liquid chromatography. Bile acid aggregates were dynamically formed around molecules chemically anchored on the supports when the eluent contained bile salts. The bile salt aggregates achieved the separation of 1,1′-binaphthyl-2,2′-diyl-hydrogenphosphate enantiomers and dansyl amino acids.     

Linear free energy relationship as a tool for characterization of three teicoplanin-based chiral stationary phases under various mobile phase compositions

Teicoplanin, teicoplanin aglycon, and methylated teicoplanin aglycon chiral stationary phases (CSPs) have been compared on the basis of the regression coefficients calculated from the linear free energy relationship (LFER) equation. The parameters have been obtained from the measurements of a set of 34 structurally diverse solutes. Influence of mobile phase composition - variation of methanol (MeOH) content - on the participation of different interactions types in the retention mechanism has been evaluated. Retention of the various interaction forces in analytes differs with both the CSP and the mobile phase composition. Hydrophobic interactions play a major role in mobile phases for high buffer contents. The more hydrophobic the CSP, the more important are they in the retention mechanism. With increase of MeOH contents in the mobile phase the major role in the interaction mechanism is shifted to more polar forces in which basicity and dipolarity/polarizability dominate. Although the LFER model does not address chiral aspects, we have attempted to explore the importance of the individual interactions in chiral discrimination of amino acids and their N-tert-butyloxycarbonyl derivatives.     

Surface confined ionic liquid as a stationary phase for HPLC

Trimethoxysilane "ionosilane" derivatives of room temperature ionic liquids based on alkylimidazolium bromides were synthesized for attachment to silica support material. The derivatives 1-methyl-3-(trimethoxysilylpropyl)imidazolium bromide and 1-butyl-3-(trimethoxysilylpropyl)imidazolium bromide were used to modify the surface of 3 microm diameter silica particles to act as the stationary phase for HPLC. The modified particles were characterized by thermogravimetric analysis (TGA) and (13)C and (29)Si NMR spectroscopies. The surface modification procedure rendered particles with a surface coverage of 0.84 micromol m(-2) for the alkylimidazolium bromide. The ionic liquid moiety was predominantly attached to the silica surface through two siloxane bonds of the ionosilane derivative (63%). Columns packed with the modified silica material were tested under HPLC conditions. Preliminary evaluation of the stationary phase for HPLC was performed using aromatic carboxylic acids as model compounds. The separation mechanism appears to involve multiple interactions including ion exchange, hydrophobic interaction, and other electrostatic interactions.     

Polypyrrole-coated silica as a new stationary phase for liquid chromatography

Summary Polypyrrole chloride and polypyrrole dodecylsulfate coated-silica packing materials have been synthesized. Reverse-phase chromtographuy was employed to characterise both packings. A series of test compounds with known properties was used as molecular probes. They included benzene and derivatives, basic drugs, and polyaromatic hydrocarbons. A commericial C₁₈ column was also used for the purpose of comparison in some cases.     

Liquid-crystalline polypropyleneimine dendrimer as a stationary phase for gas chromatography

The adsorption properties of a stationary phase for gas chromatography based on a Chromaton N-AW diatomite support modified with a 2K2S16 mesomorphic polypropyleneimine dendrimer are studied. Using the Rohrschneider constants, the studied stationary phase is classified as low polar. It is shown that the new stationary phase is suitable for the separation of both isomers and mixtures of organic substances bearing various functional groups up to a temperature of 150°C.     

Synthesis of a propyldimethylphenylsilane stationary phase using the allyl bonded phase as an intermediate

Summary A propyldimethylphenylsilane stationary phase was prepared by a hydrosilylation reaction on the double bond of an allyl bonded phase intermediate. The carbon load on the silica was between 8.8–9.0%. Evaluation of the material by FTIR indicated high conversion of the double bond by the hydrosilylation reaction. The bonded material displayed reversedphase properties as determined by the retention behavior of alkylarylketones but it was less hydrophobic than either C-8 or C-18. The stability at both low and high pH was excellent. Separations of pharmaceutical compounds, a mixture of anilines, and a mixture of dopamine and epinephrine were satisfactory.     

Solid phase extraction of petroleum carboxylic acids using a functionalized alumina as stationary phase

Petroleum essentially consists of a mixture of organic compounds, mainly containing carbon and hydrogen, and, in minor quantities, compounds with nitrogen, sulphur, and oxygen. Some of these compounds, such as naphthenic acids, can cause corrosion in pipes and equipment used in processing plants. Considering that the methods of separation or clean up the target compounds in low concentrations and in complex matrix use large amounts of solvents or stationary phases, is necessary to study new methodologies that consume smaller amounts of solvent and stationary phases to identify the acid components present in complex matrix, such as crude oil samples. The proposed study aimed to recover acid compounds using the solid phase extraction method, employing different types of commercial stationary ion exchange phases (SAX and NH(2)) and new phase alumina functionalized with 1,4-bis(n-propyl)diazoniabicyclo[2.2.2]octane chloride silsesquioxane (Dab-Al(2)O(3)), synthesized in this work. Carboxylic acids were used as standard mixture in the solid phase extraction for further calculation of recovery yield. Then, the real sample (petroleum) was fractionated into saturates, aromatics, resins, and asphaltenes, and the resin fraction of petroleum (B1) was eluted through stationary ion exchange phases. The stationary phase synthesized in this work showed an efficiency of ion exchange comparable to that of the commercial stationary phases.