矩形元上插值算子压缩性质及有限元迭代校正

本文研究了矩形上插值算子的性质,证明了一维及二维情形下插值算子具有压缩性,从而证明了矩形元上有限元迭代校正解收敛,并对几种不同类型的L型区域给出了数值例子,最后对三维及三维就以上情形作出了讨论。     

一个新十二参矩形元

本文用“双参数法”提出了一个新的十二参矩形元，并证明了其收敛性，同时分析了该元与著名的ＡＣＭ元及十二参广义协调元之间的关系。     

一个新的非常规各向异性元的收敛性分析

构造了一个新的非常规各向异性Hermite型矩形单元并据此对二阶椭圆问题提出了一个混合元格式,同时给出了该格式的收敛性分析.     

速度为双线性、压力为常数的矩形元的稳定度

1 众所周知,用混合有限元方法求解Stokes问题时,许多常用的单元都不能满足经典LBB条件.[1]与[2]提出替换条件:     

Reissner-Mindlin板的Weissman-Taylor有限元的误差分析

对Reissner-Mindlin板的Weissman-Taylor有限元逼近进行了误差分析.得到了与板的厚度一致无关的旋度、挠度和剪切应力的最优误差估计.揭示了Weissman-Taylor元与稳定化方法的关系.提出了另外两种与Weissman-Taylor元类似的元.     

关于Wilson矩形元L~∞-估计的一个注记

1.引言与预备知识 为方便起见,我们仅考虑如下的模型问题: -△u=f,在Ω中,u|Ω=0, (1.1)其中Ω R~2是边平行坐标轴的矩形域。 W~(m,p)(Ω),W_0~(m,p)(Ω)(m为整数,1≤p≤∞)表示通常定义的Sobolev空间,||·||_(m,p,Ω),|·|_(m,p,Ω)为通常定义的范数和半范数,定义W~(m,2)(Ω):=H~m(Ω),W_0~(m,2)(Ω):=H_0~m(Ω)。     

一个非协调矩形板元的L^∞—估计

利用正则Green函数法和“辅助元技巧”，得到了修正不完全双二次矩形板元的渐近最优的L^∞－误差估计。     

一组十二参高精度矩形板元

Abstract. Using the method of undetermined function, a set of 12 parameter rectangular p|atedement with doub[e set parameter and geometry symmetry is constructed. Their consistencyerror are O(h2) , one order higher than the usua[ 12 parameter rectangu|ar p[ate elements.     

基于台劳展式的矩形Reissner-Mindlin板元

1.引言 Rdissner-Mindlin板模型放弃了经典板模型的Kirchhoff假说,考虑了剪切变形,能应用于更广泛的板问题。Reissner-Mindlin板模型的挠度与转角是相互独立的,单元只需具有c~0连续性,这一点优于需要具有c~1连续性的Kirchhoff板元,但一个严重困难是普通c~0元,尤其是低阶c~0元,当板厚趋于零时不收敛,这就是所谓的自锁现象(locking)。近年来,研究避免自锁现象的Reissner-Mindlin模型板元吸引了不少的注     

求解Stokes方程的高阶矩形元

§1.引言[1—5]指出,用混合有限元方法求解Stokes过程时,要求速度子空间V_h和压力子 空间Q_h满足Babuska-Brezzi稳定条件,即存在与h 无关的正常数β_0,使     

NONCONFORMING QUADRILATERAL ROTATED ELEMENT FOR REISSNER-MINDLIN PLATE

In this paper, we extend two rectangular elements for Reissner-Mindlin plate [9] to the quadrilateral case. Optimal H and L error bounds independent of the plate hickness are derived under a mild assumption on the mesh partition.     

Reissner-Mindlin板问题带约束非协调旋转Q_1有限元方法

本文利用带约束非协调旋转Q_1元逼近Reissner-Mindlin板问题中旋度的两个分量.并分别选择Wilson元、双线性元和带约束非协调旋转Q_1元逼近挠度,相应地选取不连续的矢量值分片线性函数空间、最低阶旋转Raviart-Thomas元空间和矢量值分片常数函数空间为离散的剪应力空间,在矩形网格上构造了三个板元.通过证明一个离散的Korn不等式,并借助MITC4元的解构造了旋度、挠度和剪应力一个具有某种特殊且关键的可交换性的插值.再利用Helmholtz分解分析相容性误差.我们证明了这三个矩形元在能量范数意义下与板厚无关的一致最优收敛性.数值算例验证了我们的理论结果.     

STABILIZED FINITE ELEMENT METHODS FOR THE REISSNER-MINDLIN PLATE

A new stabilized finite element method which is different from Hughes and Franco's (1988) is presented for the Reissner-Mindlin plate model. The least square mesh-dependent residual form of the shear constitute equation is added to the Partial Projection scheme to enhance the stability. Using piecewise polynomials of order k≥1 for the rotations, of order k+1 for the displacement and of order k-1 for the shear, the kth order error-estimates are obtained. Besides, our computing scheme can be also applied to some lower order elements. All error-estimates are obtained independent of the plate thickness, and the stability parameter is an arbitrary positive constant.     

平面线弹性纯位移边值问题低阶非协调矩形元的Robust多重网格方法

1引 言 对于各向同性,均匀介质的平面线弹性问题,当Lamé常数λ→∞(泊松率v→0.5)时,即对于几乎不可压介质,通常的协调有限元格式的解往往不再收敛到原问题的解,或者达不到最优收敛阶,这就是所谓的闭锁现象(见[3],[7],[8]及[10]).究其原因,在通常的有限元分析中,其误差估计的系数与λ有关,当λ→∞时,该系数将趋于无穷大.因此为克服闭锁现象就需要构造特殊的有限元格式,使得当λ→∞时,有限元逼近解仍然收敛到原问题的解.     

THE NONCONFORMING FINITE ELEMENT METHOD FOR SIGNORINI PROBLEM

We present the Crouzeix-Raviart linear nonconforming finite element approximation of the variational inequality resulting from Signorini problem. We show if the displacement field is of H2 regularity, then the convergence rate can be improved from O（h3/4） to quasi-optimal O（h｜log h｜1/4） with respect to the energy norm as that of the continuous linear finite element approximation. If stronger but reasonable regularity is available, the convergence rate can be improved to the optimal O（h） as expected by the linear approximation.     

AN ANISOTROPIC NONCONFORMING FINITE ELEMENT WITH SOME SUPERCONVERGENCE RESULTS

The main aim of this paper is to study the error estimates of a nonconforming finite element with some superconvergence results under anisotropic meshes. The anisotropic interpolation error and consistency error estimates are obtained by using some novel approaches and techniques, respectively. Furthermore, the superclose and a superconvergence estimate on the central points of elements are also obtained without the regularity assumption and quasi-uniform assumption requirement on the meshes. Finally, a numerical test is carried out, which coincides with our theoretical analysis.     

LOW ORDER NONCONFORMING RECTANGULAR FINITE ELEMENT METHODS FOR DARCY-STOKES PROBLEMS

In this paper, we consider lower order rectangular finite element methods for the singularly perturbed Stokes problem. The model problem reduces to a linear Stokes problem when the perturbation parameter is large and degenerates to a mixed formulation of Poisson＇s equation as the perturbation parameter tends to zero. We propose two 2D and two 3D nonconforming rectangular finite elements, and derive robust discretization error estimates. Numerical experiments are carried out to verify the theoretical results.     

抛物型方程一个新的非协调混合元超收敛性分析及外推

本文研究了抛物型方程在新混合元格式下的非协调混合有限元方法. 在抛弃传统有限元分析的必要工具-Ritz 投影算子的前提下,直接利用单元的插值性质,运用高精度分析和对时间t的导数转移技巧,借助于插值后处理技术,分别导出了关于原始变量u的H¹-模和通量p=▽u在L²-模下的O（h²）阶超逼近性质和整体超收敛. 进一步,通过构造合适的辅助问题,运用Richardson 外推格式,得到了具有更高精度O（h³）阶的外推结果. 最后,给出了一些数值结果验证了理论分析的正确性.     

NONCONFORMING FINITE ELEMENT APPROXIMATIONS TOTHE UNILATERAL PROBLEM

1.IntroductionTherehavebeennumerousworkintheanalysisoffiniteelementmethodsfortheunilateralproblem(c.f.[4]andthereferencestherein).ItshouldbementionedthatinF.Scarpiniet.al.[6],I.Hlavaceket.al.[5]andF.Brezziet.al.[1],theconforminglinearelementapproximationtotheunilateralproblemhavebeenconsidered,andthevariouserrorboundshavebeenobtainedinthedifferentassumptionofregularityofsolutionoftheproblem.Inthispaper3weconsiderthreenonconformingfiniteelement(i.e.twoCrouzrixRaviartlinearelementsandWilsone…