A novel C2-symmetric bisphosphane ligand with a chiral cyclopropane backbone: synthesis and application in the Rh(I)-catalyzed asymmetric 1,4-addition of arylboronic acids

The synthesis of a novel C₂-symmetric bisphosphane ligand was accomplished starting from trans-(2R,3R)-bis(3′,5′-diphenylphenyl)cyclopropane-1,1-dimethanol as a key intermediate. This ligand was tested in the asymmetric rhodium(I)-catalyzed 1,4-addition to cyclic enones. We also compared the new ligand with a similar phosphane ligand with a less bulky cyclopropane backbone. Good yields (up to 99%) and enantioselectivities (up to 89% ee) were observed. We demonstrated that the presence of a more bulky cyclopropane backbone resulted in a less effective ligand.     

Synthesis of ortho-phenyl substituted MeO-BIPHEP ligand and its application in Rh-catalyzed asymmetric hydrogenation

A new BIPHEP-type ligand with phenyl groups at the 3,3′-positions, o-Ph-MeO-BIPHEP 3 was prepared. This ligand afforded excellent enantioselectivities when used in the Rh-catalyzed asymmetric hydrogenation of α-dehydroamino acid derivatives. The strong influence of o-phenyl groups of the ligand on the enantioselectivities of the reaction has been demonstrated by a comparison with its parent ligand MeO-BIPHEP.     

Ligand field splitting for a diffuse charge model

The simple electrostatic point charge model of the ligand field theory is extended by representing each ligand by N fractional point charges. The special cases N=6,18, and 62 are considered. A spherical charge distribution gives results similar to those of the point charge model. The splittings for non-spherical charge distributions are found to depend strongly on the orientation of the ligand charge.     

Molecular orbital calculations on transition metal complexes : XIX. π-cyclopentadienyl-π-cyclopropenylnickel

INDO SCF molecular orbital calculations for π-cyclopentadienyl-π-cyclopropenylnickel indicate a formally d¹⁰ configuration for the metal. Calculations of the ionisation energies show that electron loss should take place first from the occupied closely grouped set of dominantly d-orbitals, and then from a mainly π-cyclopentadienyl e orbital, this being the highest occupied ligand level. This latter level shows however only a slight mixing with the metal d-orbitals, resulting in a small ligand→metal electron donation; the dominant interaction is that between the higher lying π-cyclopropenyl e level and the metal 3d_xz and 3d_yz orbitals which leads to a substantial metal→ligand charge donation. The behaviour of the π-cyclopropenyl ligand is discussed using the calculated charge distributions.     

2,2′-Isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand for asymmetric cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols

The oxidative cyclization-carbonylation of meso-2-alkyl-2-propargylcyclohexane-1,3-diols mediated by Pd(II) with chiral bisoxazoline (box ligand) afforded bicyclic-β-alkoxyacrylates. Based on a ligand screening, 2,2′-isopropylidenebis[(4S,5R)-4,5-di(2-naphthyl)-2-oxazoline] ligand has been developed. The products with a chiral quaternary carbon were obtained in 71-100% yields with 85-95% ee.     

Synthesis and analysis of electrospray ionization-generated five-coordinate diastereomeric Ni–N-glycoside complexes using a quadrupole ion trap mass spectrometer

Five-coordinate Ni N-glycoside complexes, consisting of a single tridentate N-glycoside ligand and a bidentate dap ligand coordinated to a central Ni(II) ion, were synthesized for a series of diastereomeric monosaccharides. Following excitation of the precursor ions in a quadrupole ion trap, reproducibly distinct product ion spectra were obtained for each diastereomeric complex. Neutral losses resulted from cross-ring cleavages of the monosaccharide ring and/or losses of a bidentate dap ligand. Isotopic labeling studies confirmed which particular carbon centers were lost from the precursor ion as a result of the cross-ring cleavages. Synthesis of the Ni–N glycoside complex was achieved using as little as 21 μg of monosaccharide. Production of the representative five-coordinate precursor ion was obtained over a wide range of metal–ligand:monosaccharide molar ratios and product ion spectra remained reproducible over this range.     

The influence of N-heterocyclic carbene steric and electronic properties in Ru-catalysed cross metathesis reactions

The present study examines the influence of N-heterocyclic carbene (NHC) ligand electronic and steric parameters on the activity of ruthenium indenylidene complexes in cross metathesis. The NHC ligands tested lead to varied E/Z selectivities with the pre-catalyst bearing an IMes ligand exhibiting high activity.     

Xantphos as cis- and trans-chelating ligand in square-planar platinum(II) complexes. Hydroformylation of styrene with platinum-xantphos-tin(II)chloride system

Platinum(II) complexes of a diphosphine ligand xantphos (4,5-bis(diphenylphosphino)-9,9-dimethyl-xanthene) have been synthesised and characterised by NMR, conductivity and catalytic investigations. In addition to the parent complex cis-PtCl₂(xantphos), trans-platinum(II) complexes of square-planar geometry containing xantphos as a trans-chelating ligand can be obtained due to the large bite angle of the ligand. The platinum-xantphos-tin(II)chloride system acts as active hydroformylation catalyst in the hydroformylation of styrene resulting in high chemo- and regio-selectivities of up to 99.8% and 88%, respectively.     

Structural controlled pure metallo-triangular assembly through bisterpyridinyl Dibenzo[b,d]thiophene,Dibenzo[b,d]furan and Dibenzo[b,d]carbazole

A novel family of metallocycles was constructed by a one-pot self-assembly of three analogous bis(terpyridine) ligand monomers L1-L3, having different bent angles, with metal ions (Zn²⁺ or Cd²⁺). The dibenzo[b,d]thiophene-containing ligand L3 assembled with the metal ions to form a single trimer, whereas the dibenzo[b,d]furan-containing ligand L2 and dibenzo[b,d]carbazole-containing ligand L1 formed a mixture of trimers and tetramers. Heteroatoms (N, O, S) significantly contributed to the molecular size of the assemblies, owing to the bent angle of the bis-terpyridines ligands.     

Synthesis,characterization and antioxidant,antibacterial activity Zn2+, Cu2+, Ni2+ and Co2+, complexes of ligand [2-(thiophen-2-yl)-1-(thiophen-2-ylmethyl)-1H-benzo[d]imidazole]

New metal complexes of (Zn(II), Co(II), Ni(II) and Cu(II)) based on the ligand 2-(thiophen-2-yl)-1-(thiophen-2-ylmethyl)-1H-benzo[d]imidazole] were synthesized, whose structures were determined with the different spectroscopic techniques ¹H NMR,¹³C NMR, FT-IR, UV–Visible and by mass spectrometry. The thermal analysis was performed by TG-DTA. The antioxidant activity of the ligand and its complexes was evaluated by DPPH (2,2-diphenyl-1-picrylhydrazyl) method, in comparison with the synthetic antioxidant, ascorbic acid. The results obtained showed that the antioxidant activity of the ligand and its complexes is moderate and that the copper complex has a high activity that exceeds that of ascorbic acid. Antimicrobial activity of the ligand and its metal complexes was studied against two Gram-positive bacteria: Bacillus subtilis ILP1428B, Staphylococcus aureus CIP543154 and two Gram-negative bacteria: Pseudomonas aeruginosa ATCC27653, Escherichia coli CIP5412 (American Type Culture Collection)the activity data show that the metal complexes are more potent than the free ligand.     

Synthesis and cytotoxicity studies of new 1,2,4-thiadiazole derivatives and their zinc complexes

A new polyfunctional ligand of the thiadiazole family was synthesized. Cytotoxic properties with respect to leukemic cell lines, radiation stability, predicted permeability through the blood–brain barrier and cardiotoxicity of the new ligand and its precursor were determined. New zinc complexes with N-{2-[5-(3-chloro-4-methylphenylamino)-1,2,4-thiadiazol-3-yl]-1-methylethyl}-N-(2,2,6,6-tetramethylpiperidin-4-yl)-amine as the ligand have been obtained.     

Synthesis,spectral characterization,and luminescence properties of a cup-like ligand and its magnesium(II) complex

A new tripodal ligand, N,N′,N″-tri(salicylaldehyde)triaminotriethylamine (1) has been synthesized and characterized by elemental analysis, IR and UV spectroscopy, MS, and X-ray crystallography. X-ray diffraction analysis reveals that the three chains of the ligand form a cup-like structure. The ligand’s magnesium(II) complex has been synthesized and characterized by elemental analysis, conductivity, and IR and UV spectroscopy. The luminescence properties of the ligand and its magnesium(II) complex were investigated in DMF, CH₃OH, and CH₃CH₂OH solution and in the solid state at room temperature.     

On the interaction of two different types of ligands binding to the same molecule part I: basics and the transfer of the decoupled sites representation to systems with n and one binding sites

The decoupled sites representation (DSR) for one type of ligand allows to regard complex overall titration curves as sum of classical Henderson-Hasselbalch (HH) titration curves. In this work we transfer this theoretical approach to molecules with different types of interacting ligands (e.g. protons and electrons), prove the existence of decoupled systems for n ₁ and one binding sites for two different ligands, and point out some difficulties and limits of this transfer. A major difference to the DSR for one type of ligand is the loss of uniqueness of the decoupled system. However, all decoupled systems share a unique set of microstate probabilities and each decoupled system corresponds to a certain permutation of these microstate probabilities. Moreover, we show that the titration curve of a certain binding site in the original system can be regarded as linear combination of the titration curves of the individual sites of the decoupled system if the weights of the linear combination are substituted by functions in the activity of the second ligand. In the underlying model with only pairwise interaction, an important observation of our theoretical investigation is the following: Even though the binding sites of ligand L ₁ may not interact directly, they can show secondary interaction due to the interaction with the second type of ligand. This means, if the activity of the second ligand is fixed and we regard the 1-dimensional titration curve of an individual binding site for ligand L ₁ depending on its activity, we may observe a strong deviation from the classical HH shape in spite of non-interacting sites for ligand L ₁.     

A new chiral iminophosphine ligand derived from (1S,4S)-fenchone in palladium-catalyzed asymmetric allylic alkylations

A new chiral iminophosphine ligand derived from (1S,4S)-fenchone has been developed, and its usefulness as a chiral ligand in asymmetric synthesis was demonstrated in palladium-catalyzed allylic alkylations.     

Synthesis of the new chiral tridentate ligand bis(pyrid-2-ylethyl) menthylphosphine and its use in the palladium-catalyzed allylic alkylations

We describe the synthesis of a new asymmetric P,N,N′-tridentate ligand (bis(pyrid-2-ylethyl) menthylphosphine, BPEMP), containing two pyridyl rings and (1S,2R,5S)-menthylphosphino group. The ligand is obtained in five steps from natural abundant l-menthol. The coordination behavior of the ligand toward cationic (allylic)Pd(II) moiety and its first application in palladium-catalyzed asymmetric allylic alkylation are presented. Crystallographic and spectroscopic analyses reveal that [(η³-allylic)Pd(BPEMP)]⁺ complex forms only one isomer in the solid state as well as in solution.     

Structural characterization of dinuclear Ti(IV) complexes of rigid tetradentate dianionic diamine bis(phenolato) ligands; effect of steric bulk on coordination features

A small difference in diamine bis(phenolato) ligands, namely an additional single methylene unit, directs formation of dinuclear Ti(IV) complexes rather than mononuclear ones as characterized by X-ray crystallography. Varying steric bulk of the ligand affects the coordination number in the dinuclear complexes and the ligand to metal ratio. A ligand with reduced steric bulk leads to a L₂Ti₂(OiPr)₄ type complex featuring two octahedral metal centers bridged only by the two phenolato ligands, whereas a bulky ligand leads to a Ti₂(μ-L¹)(μ-OiPr)₂(OiPr)₄ type complex with a single chelating ligand, two bridging isopropoxo ligands, and two terminal isopropoxo groups on each of the two metal centers, which are of trigonal bi-pyramidal geometry.     

Synthesis of ferrocene-based phosphine ligands via Cu-catalyzed reductive coupling of ferrocenyl ketone-derived tosylhydrazones and H-phosphorus oxides

Ferrocene-based phosphine oxides with various substituents at phosphorous atoms were synthesized by Cu-catalyzed reductive coupling of ferrocenyl ketone-derived tosylhydrazones and H-phosphorus oxides. Followed by the reduction of ferrocene-based phosphine oxides, 1-substituted ferrocene-based phosphine ligand 7 and 1,1′-disubstituted ferrocene-based phosphine ligand 9 were obtained. Josiphos type ligand 8 were produced after ortho-lithiation of 7 and trapping with chlorodiphenyl phosphine or chlorodicyclohexylphosphine.     

Interpretation of the parameters of the EPR spectra of complexes containing ns 1 ions

The parameters of the EPR spectra of complexes containing paramagnetic ions with an unpaired ns electron (ns ¹ ions) were interpreted. The effect of the ligand spin-orbital coupling on the parameter of the Zeeman splitting was discussed. The effect of spin polarization on the parameters of hyperfine and ligand hyperfine couplings was considered. The reasons for the anomalous behavior of the EPR parameters were noted. The character of the covalent bonding was analyzed from the EPR spectra. The anomalous behavior of the parameters of ligand hyperfine couplings in tetragonal complexes with ns ¹ ions was discussed.     

Pentacarbonyltungsten complexes of cis- and trans-Azoiscopropane. Azo ligand geometry effects on the formation and properties of organometallic complexes

A pair of azo ligand complexes W(CO)₅L (L = cis- or trans-azoisopropane) are reported in which ligand geometry is the only structural difference. The properties and particularly the difference in dynamical behavior of the complexes is disccused.     

A picolinate-N2 complex of rhenium, the first dinitrogen complex bearing a carboxylate or a N,O-ligand

A new dinitrogen rhenium(I) complex with a picolinate ligand has been prepared and fully characterized, providing the first example of a genuine NN complex bearing a carboxylate or a N,O-coligand. The Lever electrochemical E_L ligand parameter was estimated for the first time for the picolinate ligand and shows that its carboxylate arm has a net electron-donor character similar to that of chloride, thus stabilizing the trans Re-N₂ bond.