Asymmetric ring-opening of cyclohexene oxide with trimethylsilyl azide in the presence of titanium isopropoxide/chiral ligand

trans-2-Azidocyclohexanol of enantiomeric excess up to 24% is obtained in the ring opening of cyclohexene oxide by use of trimethylsilyl azide in the presence of stoechiometric amount of titanium tetraisopropoxide and chiral diols or aminoalcohols.     

A new chiral lithium amide based on (S)-2-[1-(3,3-dimethyl)pyrrolidinylmethyl]pyrrolidine—synthesis,NMR studies and use in the enantioselective deprotonation of cyclohexene oxide

A new chiral lithium amide has been designed starting from (S)-proline. This new chiral lithium amide has been used for asymmetric deprotonation/ring opening of cyclohexene oxide to give (S)-2-cyclohexen-1-ol in 88% yield and 78% enantiomeric excess. NMR studies of the lithium amide and the ligand–substrate complex are also presented.     

Enantioselective ring opening of meso-epoxides by aromatic amines catalyzed by lanthanide iodo binaphtholates

[reaction: see text] Lanthanide iodo binaphtholates are efficient enantioselective catalysts for the ring opening of meso-epoxides by various aromatic amines. The study of the influence of temperature on the ring opening of cyclohexene oxide by o-anisidine catalyzed by the samarium complex shows an isoinversion effect with the maximum enantiomeric excess at -40 degrees C. Reactions of aniline, o-anisidine, or p-anisidine with five- or six-membered ring epoxides at this temperature allow the preparation of beta-amino alcohols with enantiomeric excesses up to 93%.     

Composition of the activated complex in the stereoselective deprotonation of cyclohexene oxide by a chiral lithium amide

Chiral lithium amides are being developed for stereoselective synthesis of chiral allylic alcohols in high yields and with high enantiomeric excess. However, rational design of the amides for improved stereoselectivity by computational methods, for example, has not been possible due to lack of knowledge of the activated complexes involved in the reactions. Kinetic results are presented for the stereoselective deprotonation by lithium (S)-1-(2-pyrrolidinylmethyl)pyrrolidide (1-Li) of cyclohexene oxide 2, in diethyl ether (DEE), to form (S)-2-cyclohexen-1-ol (S)-3 in high enantiomeric excess. The results show that the rate limiting activated complex is composed of one lithium amide monomer and one molecule of 2 and presumably a solvent molecule. The diamine 1 is found to catalyze the deprotonation.     

Homo- and heterocomplexes of sodium and lithium amides--structures in solution

Addition of the chiral amine (S)-methyl(1-phenyl-2-pyrrolidinoethyl)[15N]amine (1) to a large excess of nBuNa resulted in the formation of a mixed sodium amide/nBuNa complex. This is the first observation of such a complex. Addition of nBuLi to the chiral sodium amide dimer 3 gave a new mixed lithium/sodium amide 5. The use of 15N,6Li coupling constants showed that the lithium in 5 occupied the tetracoordinated site. The use of chiral sodium amide 3 in the desymmetrization of cyclohexene oxide gave a modest enantiomeric excess (ee) of 37%. The corresponding lithium amide gave an ee of 70% of the same enantiomer. This is the first example of the comparison of asymmetric induction by sodium as cation with that of lithium.     

Highly Enantioselective Catalytic System for Asymmetric Copolymerization of Carbon Dioxide and Cyclohexene Oxide

A new ligand can be easily prepared, and its intramolecular dinuclear zinc complexes act as a high performance catalyst for the asymmetric alternating copolymerization of cyclohexene oxide and CO₂ under very mild conditions (1 atm CO₂, room temperature), affording completely alternating polycarbonates with up to 93.8 % enantiomeric excess (ee) and 98 % yield. A high M_n value of 28 600 and a relatively narrow polydispersity (M_w/M_n ratio) of 1.43 were also achieved.     

Catalytic asymmetric chiral lithium amide-promoted epoxide rearrangement: a NMR spectroscopic and kinetic investigation

The lithium amide derived from the chiral diamine (1R,3S,4S)-3-(1-pyrrolidinyl)methyl-2-azabicyclo[2.2.1]heptane, has been reported to catalytically deprotonate cyclohexene oxide and other epoxides, yielding chiral allylic alcohols in excellent enantiomeric excess. In this work, ⁶Li, ¹H and ¹³C NMR spectroscopy have been used to study the aggregation of the chiral lithium amide in THF and the influence on the aggregation by the addition of additives, such as 1,8-diazabicyclo-[5.4.0]undec-7-ene (DBU). The activated complex under catalytic deprotonation of cyclohexene oxide, that is, with excess Li-DBU and free DBU, is built from one monomer of the chiral lithium amide, one molecule of epoxide and one additional molecule of DBU. The reaction order (?0.97) obtained for the bulk base Li-DBU shows an inverse dependence on the concentration, suggesting a deaggregation of the initial mixed dimer to a monomer-based transition state containing a monomer of the lithium amide.     

Enantioselective copper-catalyzed allylic acetoxylation of cyclohexene

Heating cyclohexene at 70 °C in the presence of AcOH, t-BuOOH and catalytic amounts of both copper- acetate or -oxide and inexpensive commercial L-amino acids led to preferential formation of (S)-acetylcyclohexene. Up to ca. 30% enantiomeric excess has been attained by this procedure, which directly introduces an optically active center in an allylic position.     

BINOL catalyzed enantioselective addition of titanium phenylacetylide to aromatic ketones

An enantioselective addition of titanium phenylacetylide to ketones, promoted by BINOL, is described; this new enantioselective protocol gives high enantiomeric excess (up to 90% ee) with aromatic ketones using a simple procedure without pyrophoric or expensive reagents.     

Catalytic asymmetric ring opening of epoxides to chlorohydrins with mild chloride donors and enantiopure titanium complexes

The ring opening of symmetric and racemic epoxides with dilithium tetrachlorocuprate or trimethylsilyl chloride in the presence of titanium (R,R)-(+)-TADDOLates or a titanium (R)-(+)-BINOL complex gave vicinal chlorohydrins or their TMS ethers with maximum 36% enantiomeric excess.     

Bifunctional Schiff base/Ti(IV) catalysts for enantioselective cyanoformylation of aldehydes with ethyl cyanoformate

A new bifunctional titanium/Schiff base catalyst was developed for the enantioselective cyanoformylation of aldehydes with ethyl cyanoformate. The reaction proceeded smoothly with a mild reaction condition to afford the cyanohydrin ethyl carbonates in high yields (up to 96%) and good enantioselectivities (up to 85% enantiomeric excess). Copyright © 2013 John Wiley & Sons, Ltd.     

Catalytic asymmetric synthesis of O-acetyl cyanohydrins from KCN,Ac2O and aldehydes

A (salen)titanium catalyst has been found to induce the asymmetric addition of potassium cyanide and acetic anhydride to aldehydes, giving enantiomerically enriched cyanohydrin esters with up to 92% enantiomeric excess using just 1 mol% of the catalyst. This is the first report of the asymmetric synthesis of cyanohydrin derivatives using a cyanide source which is non-volatile and inexpensive.     

Straightforward and Facile Synthesis of a Bioactive Component from Zingiber cassumunar Roxb.

Straightforward and facile synthesis of a bioactive component A from Zingiber cassumunarRoxb. is described. The phenylbutenoid dimer A was reported to possess anti-inflammatory and cytotoxic activities. The optically active cyclohexene ring fragment was obtained via the highly diastereo- and enantioselective Diels–Alder reaction of chiral acryloyloxazolidinones (1a and 1b) and 1-(4-hydroxy-3-methoxyphenyl)butadiene (2). The enantiomeric excess of Diels–Alder adducts 3a and 3bwere determined via high-performance liquid chromatotography of the corresponding bis-acetate (6). The greatest enantiomeric excess (99.9% ee) was obtained when the 4-phenyloxazolidin-2-one (1a) chiral auxiliary was used in combination with TiCl4. The optically pure bioactive compound A was prepared from the optically active Diels–Alder adduct (3a) in two additional steps.     

Synthesis of quinazoline based chiral ligands and application in the enantioselective addition of phenylacetylene to aldehydes

Five novel 4-phenylquinazolinols were synthesised in three steps. Their application as ligands in the titanium tetraisopropoxide promoted catalytic enantioselective addition of phenylacetylene to a variety of aldehydes gave propargylic alcohols. Under the optimised reaction conditions, the best enantioselectivity was obtained using l-lactic acid derived 4-phenylquinazolinol and apart from the cyclohexylcarbaldehyde derivative, 16 propargylic alcohols were then synthesised in moderate to excellent enantiomeric excess from 53% to 97%.     

Diastereoisomerically selective enantiomerically pure titanium complexes of Salan ligands: synthesis, structure, and preliminary activity studies

The degree of diastereoselectivity in the wrapping of four new chiral Salan ligands to form chiral-at-metal titanium complexes ranged from mild to perfect as a function of the ligands' N substituents; the enantiomerically pure complexes catalyzed the addition of diethyl zinc to benzaldehyde in 73-76% enantiomeric excess.     

Asymmetric Addition of Diethylzinc to Ketones promoted by Tartaric Acid Derivatives

The preparation of new sulfonamide ligands derived from L-tartaric acid and camphor sulfonyl chloride are described. The employment in the titanium tetraisopropoxide-promoted enantioselective addition of diethylzinc to ketones has been studied. The best enantiomeric excess is up to 99% with 7 mol% catalyst loading at room temperature.     

Enantioselective aminolytic kinetic resolution (AKR) of epoxides catalyzed by recyclable polymeric Cr(III) salen complexes

Polymeric chiral Cr(III) salen complexes catalyzed regio-, diastereo-, and enantioselective aminolytic kinetic resolution (AKR) of trans-stilbene oxide, trans-β-methyl styrene oxide, and 6-CN-chromene oxide proceeded smoothly at room temperature, providing the desired anti-β-amino alcohols in high yields and enantiomeric excess (up to 100%).     

An Overview of Heterogeneous Transition Metal-Based Catalysts for Cyclohexene Epoxidation Reaction

Cyclohexane epoxide, which contains highly active epoxy groups, plays a crucial role as an intermediate in the preparation of fine chemicals. However, controlling the epoxidation pathway of cyclohexene is challenging due to issues such as the allylic oxidation of cyclohexene and the ring opening of cyclohexane epoxide during the cyclohexene epoxidation process to form cyclohexane oxide. This review focuses on the structure-activity relationships and synthesis processes of various heterogeneous transition metal-based catalysts used in cyclohexene epoxidation reactions, including molybdenum(Mo)-based, tungsten(W)-based, vanadium(V)-based, titanium(Ti)-based, cobalt(Co)-based, and other catalysts. Initially, the mechanism of cyclohexene epoxidation by transition metal-based catalysts is examined from the perspective of catalytic active centers. Subsequently, the current research of cyclohexene epoxidation catalysts is summarized based on the perspective of catalyst support. Additionally, the differences between alkyl hydroperoxide, hydrogen peroxide (H₂O₂), and oxygen (O₂) as oxidants are analyzed. Finally, the main factors influencing catalytic performance are summarized, and reasonable suggestions for catalyst design are proposed. This work provides scientific support for the advancement of the olefin epoxidation industry.     

高聚物负载双金属催化剂催化二氧化碳-氧化环己烯的共聚反应

由CO2 氧化环己烯 (CHO)配位催化共聚制得高Tg 的脂肪族聚碳酸亚环己基酯 ,并用IR、NMR和DSC等进行了表征 ,用TG对聚合物的热稳定性进行分析 .加入环氧丙烷 (PO)三元共聚并分析PO/CHO摩尔比对Tg 的影响 .加入异氰酸苯酯有提高产物特性粘数的作用     

Titanium-promoted enantioselective diethylzinc addition to benzaldehyde in the presence of C2-symmetrical bis(camphorsulfonamide) ligands

The synthesis of several C₂-symmetric bissulfonamides is described, starting from camphorsulfonyl chloride and various aromatic as well as aliphatic diamines. These compounds have been used as ligands for titanium tetraisopropoxide promoted diethylzinc addition to benzaldehyde. The best enantiomeric excess obtained in this study was 67%. The stereochemical outcome of the reaction is highly influenced both by the structure of ligand and the reaction parameters.