随机指数系的完备性和极小性

得到了随机指数系在加权Banach空间Cα中完备和极小的充要条件,其中Cα是实直线R上的复连续函数在权α的一致范数下组成的Banach空间.这些结果可以看作是Malliavin经典结果的概率推广.     

一类二阶非线性摄动微分方程的振动性与渐近性

研究了一类二阶非线性摄动微分方程解的振动性质和渐近性质,建立了两个新的振动性与渐近性定理,推广和改进了已有的一些结果.     

随机指数系的完备性和极小性

得到了随机指数系在加权Banach空间C_α中完备和极小的充要条件,其中C_α是实直线R上的复连续函数在权α的一致范数下组成的Banach空间.这些结果可以看作是Malliavin经典结果的概率推广.     

Sturm-Liouville边值问题解的非存在性、存在性和多重性结果

本文研究下述Sturm-Liouville边值问题利用Schauder不动点定理、上下解方法和Leray-Schauder映射度理论,获得了解的非存在性、存在性和多重性结果.其中一些是全新的结果,另一些则扩展、改进和完善了由Erbe,Wang,Hai,Lee和Lin所获得的结果.     

经验似然的冗余性

提出经验似然的冗余性和偏冗余性的概念,讨论了相应的冗余性等价条件,将GMM的冗余性结果推广到经验似然估计,同时模拟实验结果也证实了经验似然的冗余性和偏冗余性对估计的影响.     

中立型抛物方程解的振动性与渐近性

本文研究了,具有分布滞量的非线性中立型抛物方程（E）解的振动性与渐近性,我们的结果推广了Bainov和Petrov[1]对方程的一些结果。     

一类二阶非线性差分方程的振动性与渐近性

研究了一类二阶非线性差分方程解的振动性与渐近性,建立了三个新的振动性与渐近性定理,推广和改进了已知的一些结果.     

带阻尼项的三阶强迫泛函微分方程的振动性和渐近性

建立了偏差变元依赖于状态的三阶强迫泛函微分方程解的若干振动性和渐近性.所得结果是新的,同时推广了文献中的有关结果.     

二阶非线性摄动微分方程解的振动性与渐近性

研究了一类二阶非线性摄动微分方程解的振动性与渐近性,建立了四个新的振动性与渐近性定理,推广和改进了已知的一些结果.     

半群的拟紧性和不可约性

利用算子半群生成元的边界扰动方法,给出了Banach格上C0半群的拟紧性和不可约性的充分条件.并利用该结果对一串联可修复系统的拟紧性和不可约性进行了研究.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

乡村绿色生态旅游适宜等级VIKOR评估方法

针对乡村绿色生态旅游特征,并考虑旅游者个体感受与群体效益,本文从乡村绿色生态旅游开发与适宜评级概念出发,提出乡村绿色生态旅游适宜等级VIKOR评估模型与方法。首先,从等级评估的概念与内涵出发,刻画乡村绿色生态旅游适宜评级问题,避免混淆旅游适宜评级和排序两个本质不同的问题。然后,构建乡村绿色生态旅游适宜等级评估指标及隶属函数,提出评估指标的熵权确定方法。其次,提出乡村绿色生态旅游适宜等级VIKOR评估模型与二元语义等级评估方法。最后,通过案例研究和比较分析,说明本文所提模型与方法的合理性、可行性与实用性。     

On the use of history of mathematics: an introduction to Galileo's study of free fall motion

In this paper, we report on an experimental activity for discussing the concepts of speed, instantaneous speed and acceleration, generally introduced in first year university courses of calculus or physics. Rather than developing the ideas of calculus and using them to explain these basic concepts for the study of motion, we led 82 first year university students through Galileo's experiments designed to investigate the motion of falling bodies, and his geometrical explanation of his results, via simple dynamic geometric applets designed with GeoGebra. Our goal was to enhance the students’ development of mathematical thinking. Through a scholarship of teaching and learning study design, we captured data from students before, during and after the activity. Findings suggest that the historical development presented to the students helped to show the growth and evolution of the ideas and made visible authentic ways of thinking mathematically. Importantly, the activity prompted students to question and rethink what they knew about speed and acceleration, and also to appreciate the novel concepts of instantaneous speed and acceleration at which Galileo arrived.     

不确定环境下再制造生产调度研究

针对再制造过程中存在的再制造件质量状况和加工时间不确定性调度问题,分别采用随机数和三角模糊数表示质量状况和加工时间的不确定性。在满足工序顺序、机器等限制下,将各自带有权重系数的最大完工时间和总成本之和最小值当做目标函数,构造不确定环境下再制造生产调度模糊模型且转换成确定的单目标非线性规划模型。应用多层编码遗传算法求解某个再制造子系统算例得到,决策者对于最大完工时间和总成本的重视程度不同,调度方案不同,其需要根据自身关注的重点做出决策,选择合适的调度方案。并且调度结果会受到决策者消极或积极态度的影响,态度越积极,结果越好,反之,态度越消极,结果越差,从而检验了再制造生产调度模型的正确性。希望为再制造实现产业化,规模化提供相关参考意见。     

Interpreting linear systems of equalities and inequalities. Application to the water supply problem

This paper shows how the mathematical and the engineering points of view are complementary and help to model real problems that can be stated as systems of linear equations and inequalities. The paper is devoted to point out these relations and making them explicit for the readers to realize about the new possibilities that arise when contemplating the compatibility conditions or the set of general solutions from the dual perspective. After reviewing an orthogonally based powerful algorithm to analyse the compatibility of linear systems of equations and solving them, a water supply problem is used to illustrate its mathematical and engineering multiple aspects, including the optimal statement of the problem in terms of an adequate selection and numbering of equations and unknowns, an analysis of the compatibility conditions and a physical interpretation of the general solution, together with that of each individual generators of the affine space. The possibilities of removing unknowns without altering the compatibility of the problem is also analysed. Next, the Γ‐algorithm to analyse the compatibility of linear systems of inequalities and solving them is described and then, the water supply problem is revisited adding some constraints, such as capacity limits for the pipes and retention valves, and discussed as to how they affect the resulting general solution and other aspects. Finally, some conclusions are derived. Copyright © 2005 John Wiley & Sons, Ltd.     

复杂装备研制协调超网络均衡与实现路径

复杂装备研制主体间呈现社会关系、合作关系、协调关系等网络关系,并且相互影响相互作用,其影响复杂装备研制的重要参数。为有效描述在资源环境约束下制造商和供应商的关系,探讨复杂装备研制协调机理与实现路径,本文利用超网络方法,设计了相互影响、相互作用的社会关系网络、协调网络和合作网络的复杂装备研制协调超网络,并将社会关系水平、协调度和合作水平作为超网络的3个决策变量,建立基于关系价值最大、协调成本最低、协调风险最小、合作收益最大、合作风险最小和成本最小等不同偏好下的多目标最优决策模型,构建了复杂装备研制超网络均衡模型,并利用其探讨超网络均衡和实现路径。     

Staircase transportation problems with superadditive rewards and cumulative capacities

A cumulative-capacitated transportation problem is studied. The supply nodes and demand nodes are each chains. Shipments from a supply node to a demand node are possible only if the pair lies in a sublattice, or equivalently, in a staircase disjoint union of rectangles, of the product of the two chains. There are (lattice) superadditive upper bounds on the cumulative flows in all leading subrectangles of each rectangle. It is shown that there is a greatest cumulative flow formed by the natural generalization of the South-West Corner Rule that respects cumulative-flow capacities; it has maximum reward when the rewards are (lattice) superadditive; it is integer if the supplies, demands and capacities are integer; and it can be calculated myopically in linear time. The result is specialized to earlier work of Hoeffding (1940), Fréchet (1951), Lorentz (1953), Hoffman (1963) and Barnes and Hoffman (1985). Applications are given to extreme constrained bivariate distributions, optimal distribution with limited one-way product substitution and, generalizing results of Derman and Klein (1958), optimal sales with age-dependent rewards and capacities.To our friend, Philip Wolfe, with admiration and affection, on the occasion of his 65th birthday.Research was supported respectively by the IBM T.J. Watson and IBM Almaden Research Centers and is a minor revision of the IBM Research Report [6].     

网络团购环境下基于电子中介的商品交易优化模型

在网络团购环境下,如何考虑顾客、商家和电子中介三方主体的利益并实现商品交易最优化,这是一个值得关注的研究问题。本文针对基于电子中介的网络团购商品交易问题,依据商家与电子中介事先商定的团购商品的交易数量区间、交易数量折扣以及顾客和商家分别提交的商品的报价和保留价,在考虑顾客、商家和电子中介三方利益最大化的前提下,构建了多目标商品交易优化模型;进一步地,将多目标优化模型转化为单目标优化模型,并给出了求解优化模型的遗传算法。最后,通过一个算例说明了本文构建的模型及其求解算法的可行性和有效性。     

激光辐照下圆薄板的动态屈曲研究

对强激光辐照下薄板（铜片）的动态热失稳过程进行了分析，得出了简支圆薄板在热冲击下发生的屈曲及后屈曲过程，并给出了临界激光功率密度与薄板厚径比的关系曲线，方法计入了温度分布、惯性项和缺陷大小对于失稳过程的影响。这一工作有利于人们对强激光引起的硬目标破坏机理的认识。     

Magneto-Compound Reaction of Convective Flow via a Porous Inclined Plate with Heat Energy Absorption

The current study is concerned with the unsteady heat and mass transfer of MHD free convection flow via a porous inclined plate that accelerates exponentially with temperature and concentration. Heat emission, source/sink, radiation absorption, and reaction are taken into account in the energy and species equations. The innovative part of the work is the analysis of the flow phenomenon with a heat source or sink and radiation absorption along the chemical reaction. The governing PDEs are reduced into ODEs via the non-dimensional variables and afterward solved analytically utilizing the perturbation strategy. Graphical representations of liquid temperature, speed, and concentration as well as the Sherwood \& Nusselt quantities and the skin friction factor are displayed in tabular form for different combinations of appropriate stream quantities. The analysis of a resistance quantum grows with the size of the magnetic, whereas the rates of mass and heat transfer decline with increasing radiation, reaction, and Schmidt number. Thermal-velocity and concentration-velocity profiles interact reciprocally with the accelerating radiation, heat source, and compound reaction. The growth of speed and thermal profiles is clearly visible due to the absorption and Prandtl values. The present results are in strongly consistent with the earlier published results. There are numerous applications for this research in many sectors and material processing for understanding drag in seepage flows on heated/cooled and inclined surfaces.