Phosphorylation of Tetrahydric Phenols with Trivalent Phosphorus Compounds. Synthesis of Tetraphosphites

The reactions of 1,1'-spirobi(5,6-dihydroxy-3,3-dimethylindane) and 1,2,4,5-tetrahydroxybenzene with 2-chloro-1,2,3-dioxaphosphorinanes of various structure were used to obtain tetraphosphorylated systems. Investigation of the chemical properties of the products was initiated. Basing on 1,1'-spirobi(3,3-dimethylindane-5,6-diyl) tetra(2,2-dimethylpropanediyl phosphite), a Pt(II) chelate was synthesized.     

Application of the modified Shepard interpolation method to the determination of the potential energy surface for a molecule-surface reaction: H2 + Pt(111)

We have used a modified Shepard (MS) interpolation method, initially developed for gas phase reactions, to build a potential energy surface (PES) for studying the dissociative chemisorption of H2 on Pt(111). The aim was to study the efficiency and the accuracy of this interpolation method for an activated multidimensional molecule-surface reactive problem. The strategy used is based on previous applications of the MS method to gas phase reactions, but modified to take into account special features of molecule-surface reactions, like the presence of many similar reaction pathways which vary only slightly with surface site. The efficiency of the interpolation method was tested by using an already existing PES to provide the input data required for the construction of the new PES. The construction of the new PES required half as many ab initio data points as the construction of the old PES, and the comparison of the two PESs shows that the method is able to reproduce with good accuracy the most important features of the H2 + Pt(111) interaction potential. Finally, accuracy tests were done by comparing the results of dynamics simulations using the two different PESs. The good agreement obtained for reaction probabilities and probabilities for rotationally and diffractionally inelastic scattering shows clearly that the MS interpolation method can be used efficiently to yield accurate PESs for activated molecule-surface reactions.     

Surface characterization and barrier properties of plasma‐modified polyethersulfone/layered silicate nanocomposites

This study describes the preparation of polyethersulfone (PES)/layered silicate nanocomposites (PLSNs) by mixing PES polymer chain into organically‐modified layered silicate in 1‐methyl‐2‐pyrrolidinone (NMP) solution. Both X‐ray diffraction data and transmission electron microscopy images of PLSNs indicate that the silicate layers were almost exfoliated and randomly distributed into the PES matrix. The mechanical and barrier properties of PLSNs show remarkable enhancement in the storage modulus and water/oxygen permeability when compared with that of neat PES matrix. Surfaces modification of PES and PLSN films with various treated times, system pressures, and radio frequency (RF) powers were performed using a mixture of oxygen (O₂) and nitrogen (N₂) plasmas. The topographical and physical properties of plasma‐modified PES and PLSN surfaces were investigated using scanning probe microscopy (SPM), contact‐angle measurements, and X‐ray photoelectron spectroscopy (XPS). These results indicate that the surface roughness of PLSNs with the same condition of plasma modification is lower than that of neat PES matrix and is probably due to the increase of stiffness with the presence of inorganic layered silicates in PES matrix. The surface properties of the PES and PLSNs are also changed from hydrophobic to hydrophilic. The XPS spectra suggest that the exposure of the PES and PLSNs to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new oxygen‐ and nitrogen‐containing functional groups onto polymer surfaces to change their surface properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3185–3194, 2006     

Nucleophilic substitution at silicon (SN2@Si) via a central reaction barrier

It is textbook knowledge that nucleophilic substitution at carbon (SN2@C) proceeds via a central reaction barrier which disappears in the corresponding nucleophilic substitution reaction at silicon (SN2@Si). Here, we address the question why the central barrier disappears from SN2@C to SN2@Si despite the fact that these processes are isostructural and isoelectronic. To this end, we have explored and analyzed the potential energy surfaces (PES) of various Cl-+CR3Cl (R=H, CH3) and Cl-+SiR3Cl model reactions (R=H, CH3, C2H5, and OCH3). Our results show that the nature of the SN2 reaction barrier is in essence steric, but that it can be modulated by electronic factors. Thus, simply by increasing the steric demand of the substituents R around the silicon atom, the SN2@Si mechanism changes from its regular single-well PES (with a stable intermediate transition complex, TC), via a triple-well PES (with a pre- and a post-TS before and after the central TC), to a double-well PES (with a TS; R=OCH3), which is normally encountered for SN2@C reactions.     

化学反应的高精度从头算势能面

势能面是化学反应动力学研究的基础。近年来随着理论方法的发展与计算技术的进步,不但含三、四个原子反应体系的电子基态势能面的构建精度进一步提高,一些反应体系的多电子态耦合势能面的构建和含六个原子以上反应体系的高维从头算势能面的构建也取得了重要进展。本文结合若干典型体系势能面的构建工作,主要介绍了高精度电子基态势能面,包括Renner-Teller、旋轨耦合等非绝热效应的耦合势能面以及高维势能面方面的研究进展。     

Influence of blend miscibility on the proton conductivity and methanol permeability of polymer electrolyte blends

The influence of miscibility on the transport properties of polymer electrolyte blends composed of a proton conductor and an insulator was investigated. The proton‐conductive component in the blends was sulfonated poly(ether ketone ketone) (SPEKK), while the nonconductive component was either poly(ether imide) (PEI) or poly(ether sulfone) (PES). The phase behavior of PEI‐SPEKK blends was strongly influenced by the sulfonation level of the SPEKK. At low sulfonation levels (ion‐exchange capacity (IEC) = 0.8 meq/g), the blends were miscible, while at a slightly higher level (IEC = 1.1 meq/g), they were only partially miscible and for IEC ≥ 1.4 meq/g they were effectively immiscible over the entire composition range. The PES‐SPEKK blends were miscible over the entire range of SPEKK IEC considered in this study (0.8–2.2 meq/g). At high IEC (2.2 meq/g) and at low mass fractions of SPEKK (<0.5), the miscible blends (PES‐SPEKK) had higher proton conductivities and methanol permeabilities than the immiscible ones (PEI‐SPEKK). The opposite relationship was observed for high mass fractions of SPEKK (>0.5). This behavior was explained by the differences in morphology between these two blend systems. At low IEC of SPEKK (0.8 meq/g), where both PEI‐SPEKK and PES‐SPEKK blend systems exhibited miscibility, the transport properties were not significantly different. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2253–2266, 2006     

Can Enantioselectivity be Computed in Enthalpic Barrierless Reactions? The Case of CuI‐Catalyzed Cyclopropanation of Alkenes

An extensive computational study has been carried out on different catalytic systems for cyclopropanation reactions based on copper. Most DFT schemes used present drawbacks that preclude the calculation of accurate absolute kinetic properties (energy barriers) of such systems, excepting the M05 and M06 suites of density functionals. On the other hand, there is a wide range of DFT methods capable of reproducing relative energy values, which can be easily translated into selectivities. Most of the theoretical levels used tend to overestimate activation barriers, allowing the location of the transition state (TS) on the potential-energy surface (PES) of the most reactive systems, which are probably artifacts of the method. However, after a thorough analysis of the calculated PES, and the origin of the energy differences obtained for the different alkene approaches in chiral systems, it is found that energy differences are almost constant over a wide range of geometries covering the reaction channel zone in which the true TS on the Gibbs free-energy surface (GFES) lies. Therefore, many computational schemes can still be used confidently to explain and predict enantioselectivities in these systems.     

气相中Ir＋循环催化N2O与CO反应机理的理论研究

采用密度泛函UB3LYP方法和Stuttgart赝势基组, 计算研究了气相中循环催化N2O ＋CO →N2 ＋CO2 反应的微观机理. 通过对相关物种亲氧性的计算, 证明了Ir＋循环催化作用在热力学上是可行的. 不同自旋态反应势能面的计算结果表明, 循环催化的两步反应均为自旋禁阻反应, 各存在不同自旋态势能面的交叉, 并运用Yoshizawa的内禀坐标单点垂直激发计算的方法找出了势能面交叉点; 两步反应均为放热反应, 总放热量为358.9 kJ&#8226;mol－1.     

Pb(m)-Phenyl (m = 1-5) complexes: an anion photoelectron spectroscopy and density functional study

The phenyl-lead metal complexes ([Pb(m)C6H5]-) produced from the reactions between benzene and lead clusters formed by laser ablation on a lead solid sample are studied by photoelectron spectroscopy (PES) and density functional theory (DFT). The adiabatic electron affinities (EAs) of [Pb(m)C6H5]- are obtained from PES at 308 nm, and the differences between the PES of [Pb(m)C6H5]- and the PES of Pbm- are discussed in detail. The results reveal that the phenyl group binds perpendicularly on lead clusters through the Pb-C sigma bond and the complexes have a closed shell structure. Calculations with DFT are carried out on the structural and electronic properties of [Pb(m)C6H5]-, and the adiabatic detachment energy for the optimized structures of anion are in agreement with the experimental PES results. The density of states (DOS) calculated is compared with experimental PES and is discussed. The most possible structures for each species are concluded, and the bonding between Pb and phenyl is analyzed, which also proves that the phenyl group binds perpendicularly on lead clusters through the Pb-C sigma bond.     

Mechanical and morphological investigations of reactive polysulfone toughened epoxy networks

The diglycidyl ether of bisphenol-A (DGEBA) epoxy resin was toughened by aminophenyl functional reactive polyethersulfones (R-PES) or by t-butyl terminated non-reactive polyethersulfones (T-PES). The molecular weights of PES were controlled to afford 5,000 to 20,000 g/mole and loadings were also varied from 5 to 30 wt.%. Epoxy networks cured with 4, 4'-diaminodiphenylsulfone (DDS) were subjected to Tg determinations, plane strain fracture toughness (K_1C) measurements, chemical resistance tests and morphological studies by SEM. Very significantly improved K_1C fracture toughness was obtained with reactive PES toughening without loss of chemical resistance, while non-reactive PES blended epoxy resins exhibited only slightly improved fracture toughness but poor chemical resistance. It was possible to load up to 30 wt.% of PES without utilizing solvent and the maximum K_1C fracture toughness with R-PES was around 2.2 MPa-m 0.5, which was equivalent to the neat thermoplastic resin. Ductile fracture of the PES phase is suggested as a major toughening mechanism and this is highly dependent of the excellent adhesion developed between the PES and epoxy phases due to the chemical bonds. The systems demonstrated that chemical resistance of thermosets can be combined with the tough characteristics of thermoplastics.     

Synthesis,properties, and sulfonation of novel dendritic multiblock copoly(ether‐sulfone)

Multiblock copoly(ether‐sulfone)s ( PES s) bearing anchor units for the construction of dendritic blocks were synthesized by two‐step reactions: (1) synthesis of PES block with both phenoxide end‐groups; (2) chain extension and end‐capping of the block by use of excess novel hexafunctional agent, hexakis(4‐(4‐fluorophenylsulfonyl)phenyl)benzene. The optimum average block length (n) and amount (x) of the hexafunctional agent used for the synthesis of high‐molecular‐weight PES without crosslinking were n = 26 and x = 2.6 equiv, respectively. The dendritic blocks in the PES were constructed by the aromatic nucleophilic substitution reaction of the activated aromatic fluoride groups on the anchor units using 4‐tritylbenzenethiol. The clean substitution of the fluoride groups in the PES was confirmed by ¹H NMR and ¹⁹F NMR. Three sulfonic acid groups were introduced on the pendant phenyl rings of the trityl groups in the PES by the reaction with chlorosulfonic acid. This is the first example of a dendritic PES bearing clusters of sulfonic acid groups only on the dendritic blocks. Cast films of presulfonated dendritic PES were strong and flexible, however, the membranes of sulfonated dendritic PES were brittle so that the conductivity measurements were not performed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6365–6375, 2008     

Extended Hartree-Fock (EHF) theory in chemical reactions

The roles of orbital, spin and permutation symmetries in the extended Hartree-Fock (EHF) wavefunction are investigated in relation to the applications of group theory to chemical reactions. The utility of the magnetically ordered set for an extended HF calculation is pointed out. The relative stabilities among linear Hückel and Möbius three-center three-electron (3,3) systems are investigated by the generalized Hartree-Fock (GHF) and EHF methods in order to confirm the reliability of the valence-bond (VB) selection rule for free radical reactions.     

Correlation between macrovoid formation and the ternary phase diagram for polyethersulfone membranes prepared from two nearly similar solvents

The morphological structure of membranes prepared from two nearly similar systems consisting of water/N,N-dimethylacetamide (DMAc)/polyethersulfone (PES) and water/N-methyl-2-pyrrolidone (NMP)/polyethersulfone (PES) has been studied. The morphology of the prepared membranes showed that both systems exhibit an instantaneous liquid–liquid demixing that leads to the formation of macrovoids in the resulting structures. Nevertheless, the resulting macrovoid structures were contrary to the generally accepted concepts concerning macrovoid formation. The membranes morphologies showed that in spite of better miscibility between water and DMAc, which must promote the formation of channel- and finger-like structures, more sponge-like structures were observed in membranes prepared from the water/DMAc/PES system compared to those prepared from the water/NMP/PES system. To find the source of this unexpected phenomenon, the complete ternary phase diagrams consisting of theoretical binodal curves, vitrification boundaries, and gelation boundaries were constructed for both systems and it was shown that gelation process occurs earlier in the water/DMAc/PES system compared to the other system, which inhibits the growth of macrovoids in this system.     

Cyclopolycondensations. VII. Preparation of aromatic poly(ureido acids) by the low-temperature solution polymerization and cyclodehydration to fully aromatic polyquinazolinediones

Fully aromatic polyquinazolinediones (IV) of high molecular weight were obtained by thermal cyclodehydration of aromatic poly(uredio acids) (III) prepared by the polyaddition reaction of 4,4′-diaminobiphenyl-3,3′-dicarboxylic acid (I) with aromatic diisocyanates (II). From the kinetic study of reactions of model systems (anthranilic acid with phenyl isocyanate) in the presence of a variety of basic catalysts, it was established that tertiary amines had the highest catalytic activity for the formation of ureido linkage. The optimum polymerization conditions were determined by the study of reaction variables such as monomer concentration, polymerization temperature, monomer ratio, and catalyst concentration. The effect of polarity and purity of organic solvents and reactants was also studied.     

Enantioselective Synthesis of 3,3′‐Diaryl‐SPINOLs: Rhodium‐Catalyzed Asymmetric Arylation/BF3‐Promoted Spirocyclization Sequence

The enantioselective synthesis of a series of C₂‐symmetric 3,3′‐diarylated 1,1′‐spirobiindane‐7,7′‐diols (3,3′‐diaryl‐SPINOLs) was developed by sequential Rh‐catalyzed twofold asymmetric conjugate arylation/BF₃‐promoted diastereoselective spirocyclization (>20:1 d.r. and >99 % ee for all examples). Some phosphoramidite ligands were prepared from the 3,3′‐Ph‐SPINOL and applied to several catalytic asymmetric reactions, and the 3,3′‐diarylated ligands showed higher enantioselectivities than the privileged nonsubstituted ligands.     

Thermal studies on some reactions in the solid-state

The solid-state thermal reactions of 2,6-diamino-4-chloropyrimidine, 3,3-dimethoxybenzidine and of thiosemicarbazide with each of 2-hydroxy-1-naphthaldehyde and 2,4-dihydroxybenzaldehyde in a mole ratio of 1∶1 produced (1+1) condensation products (‘half units’). These solid state reactions have been studied by means of differential thermal analysis (DTA). The products of the reactions were identified using elemental analysis and IR spectroscopy. Some kinetic parameters such as orders and activation energies of the reactions were evaluated form the DTA curves.     

聚乙二醇对聚醚砜微孔膜致孔作用的研究

以聚醚砜聚乙二醇溶剂为铸膜液体系、采用干湿相转化法制备微孔滤膜,研究了各种制膜条件对膜孔径结构的影响.实验发现聚乙二醇在体系中起到分散稳定的作用,只有到浓度大于70%时,才会对铸膜液的粘度产生明显影响,聚合物在铸膜液中的溶解状态也随之改变,进而影响膜的结构.不同溶剂NMP、DMF、DMAc、DMSO等极性溶剂或固体溶剂己内酰胺均可制得开孔率较高的微孔膜,但对膜的结构和性能影响差别不大.在本研究体系中,膜的结构取决于聚乙二醇、溶剂的浓度比例关系.     

Transiting the molecular potential energy surface along low energy pathways: The TRREAT algorithm

The Transition Rapidly exploring Random Eigenvector Assisted Tree (TRREAT) algorithm is introduced to perform searches along low curvature pathways on a potential energy surface (PES). The method combines local curvature information about the PES with an iterative Rapidly exploring Random Tree algorithm (LaValle, Computer Science Department, Iowa State University, 1998, TR98–11) that quickly searches high‐dimensional spaces for feasible pathways between local minima. Herein, the method is applied to identifying conformational changes of molecular systems using Cartesian coordinates while avoiding a priori definition of collective variables. We analyze the pathway identification problem for alanine dipeptide, cyclohexane and glycine using nonreactive and reactive forcefields. We show how TRREAT‐identified pathways can be used as valuable input guesses for double‐ended methods such as the Nudged Elastic Band when ascertaining transition state energies. This method can be utilized to improve/extend the reaction databases that lie at the core of automatic chemical reaction mechanism generator software currently developed to build kinetic models of chemical reactions. © 2013 Wiley Periodicals, Inc.