Copolymers of tetrafluoroethene with chlorotrifluoroethene and with bromotrifluoroethene

Tetrafluoroethene (TFE)–chlorotrifluoroethene (CTFE) and TFE–bromotrifluoroethene (BTFE) copolymers have been synthesized by solution copolymerization over the entire range of comonomer composition. Crystallinity data are reported and first- and second-order transitions have been investigated by DSC. Glass transition temperatures of TFE-CTFE copolymers vary in a nonlinear fashion in the range defined by the homopolymers conforming best to the Johnston equation; the behavior in the TFE-BTFE system is more linear. Whereas TFE-BTFE copolymers show a steep decrease of melting temperature at higher BTFE content, due to the amorphous character of the polymers, more regular behavior was found for TFE-CTFE copolymers. Enthalpies of fusion are also reported. The results are discussed in relation to copolymer composition and structure and are compared with data on tetrafluoroethene–hexafluoropropene (FEP) fluorocarbon resins.     

Enthalphy of mixing of bromobenzene with n-alkanes,with cyclohexane,and with benzene

A dynamic flow microcalorimeter of the Picker design was used to measure enthalpies of mixing at 298.15 K and atmospheric pressure of the six binary systems bromobenzene + n-hexane, + n-heptane, + n-nonane, + n-tetradecane, + cyclohexane, and + benzene. Within the homologous series of n-alkane systems, the interaction parameter, h₁₂, calculated from rigid-lattice group contribution theory, decreases weakly with increasing chain length of the alkane. This behavior is quite analogous to that observed with chloro-derivatives of benzene + n-alkane.     

Reactions of amines with a dimer of hexafluoropropene and with a perfluorovinyl sulfide prepared with hexafluoropropene

Some reactions of amines with a perfluorovinylsulfide, (CF₃)₂CFSC(CF₃)CFCF(CF₃)₂, prepared from hexafluoropropene (HFP) and sulfur [1] are compared to reactions of the same amines with the thermodynamic dimer of HFP, (CF₃)₂CCFCF₂CF₃. Many new ketenimines, eneamines, amidines, nitriles, and quinoline derivatives are reported.     

Treatment of Wool with Laccase and Dyeing with Madder

This research has explored the effect of laccase (Denilite ІІ S) on the physical properties of the wool fabric and confirms the anti-felting of wool. In the experiment, laccase was applied to a wool fabric and different characteristics including weight loss, strength, alkali solubility, felting shrinkage, water drop absorption, and dye ability with madder were studied. The surface morphology of the wool fabrics was also observed by scanning electron microscope. The results indicated that the wool fabric treated with laccase has a higher water drop absorption, lower felting shrinkage, and lower values of a ^* and b ^*. Treatment of a wool fabric with 10% or lower percentage of laccase reduced the fabric weight but increased the tensile strength. However, using higher concentration of laccase reduced fabric weight and tensile strength. The dyeing of laccase pre-treated wool fabric with madder indicated a lower lightness.     

High-temperature reactions of trichloroethylene with toluene and with methanol

Conclusions The reactions of trichloroethylene with toluene and with methanol, conducted 560–570°, leads to the formation of a mixture of the isomers R-CH=CCl₂ and cis- and trans-R-CCl=CHCl (R=CH₂C₆H₅ and CH₂OH).Translated from Izvestiya Akademii Nauk SSSR. Seriya Khimicheskaya, No. 12, pp. 2777–2778, December, 1967.We thank E. D. Lubuzh and A. V. Kessenikh for determining and interpreting the IR and NMR spectra.     

Reactions of indole derivatives with cardioprotective activity with reactive oxygen species. Comparison with melatonin

We have previously reported on the synthesis of novel indole derivatives containing an amine-triazole moiety (1a-d, 2a-c), and their antioxidant activity on in vitro non-enzymatic rat hepatic microsomal lipid peroxidation. Some of the compounds showed protective activity against oxidative injury of ischemic myocardium. In the present paper we investigated the interactions of these derivatives with reactive oxygen species, in order to find a mechanism of their antioxidant capacity and to identify structural characteristics responsible for these properties. These interactions were compared with melatonin, which is also an indole derivative. The antioxidant profiles of the compounds were established by different in vitro protocols as follows: 1) by the interaction of the compounds with the 1,1-diphenyl-2-picrylhydrazyl (DPPH) stable free radical, 2) their scavenging effects on superoxide anions using an enzymic system of xanthine-xanthine oxidase, 3) their inhibitory effects on xanthine oxidase and 4) their ability to scavenge hydroxyl radicals by comparison with dimethyl sulfoxide (DMSO) for *OH. All compounds were found to interact with DPPH, most of them to be superoxide anion scavengers and to be strong hydroxyl radical scavengers. Derivatives 1a and 1d substituted on the nitrogen of the indolic nucleus were found to have better antioxidant properties than the reference compounds used and melatonin.     

Reaction of isatin with alkylating agents with acidic methylenes

The reaction of isatin (1) with different alkyl halides 2 and alkaline carbonates in aprotic polar solvents leads mainly to N-alkyl derivatives 3. The use of alkylating agents that have acidic methylenes leads to competitive formation of the corresponding epoxide 5. The formation of 5 is favored by low-polarity solvents at low temperatures and strong bases. Epoxides 5c, d obtained using NaEtOH/EtOH at 0–5 °C are transformed into the corresponding 4-quinolinones 6 at higher temperatures. The use of Ag₂CO₃ allows obtaining compounds 3 as major products, along with varying amounts of labile O-alkyl derivatives 4 and dimerization products.     

Reaction of 2-aminobenzoxazoles with compounds with activated multiple bonds

The reaction of 2-aminobenzoxazoles with activated alkenes of the acrylic acid type and its derivatives and methyl vinyl ketone proceeds in the presence of basic catalysts to give products of mono- and diaddition at the exocyclic nitrogen atom. The reaction of 5(6)-substituted 2-aminobenzoxazoles with esters of propyl and acetylenedicarboxylic acids in the absence of catalysts leads to the production of condensed 2-oxopyrimidines. The effect of substituents and the reaction conditions on the course of the process was investigated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1467–1471, November, 1984.     

Kinetic model of diepoxides with reactive diluents cured with amines

The systems of diepoxides cured with primary amine in presence of an monoepoxide, monofunctional reactive, under equal stoichiometric ratio has been analyzed by a generating function method. The average degree of polymerization, which changed with time or conversion, and gel point were calculated. The profiles of the degree of polymerization and critical conversion are dependent on the content of and relative reactivities of epoxy groups. For a system with the same ratio, the critical epoxy conversion increases with increasing reactivity. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2339–2348, 1998     

Reactions of p-Nitrophenyloxirane with Amines Containing Fragments with Bicyclic Skeleton

Reactions of p-nitrophenyloxirane with amines containing fragments with bicyclic skeleton of norbornene, norbornane, epoxynorbornane (stereoisomeric exo- and endo-5-aminomethylbicyclo[2.2.1]hept-2-enes, N-benzyl-endo-5-aminomethylbicyclo[2.2.1]hept-2-ene, endo-5-(2-aminoethyl)bicyclo[2.2.1]hept-2-ene, stereoisomeric exo- and endo-2-aminomethylbicyclo[2.2.1]heptanes, 2-(1-aminoethyl)bicyclo[2.2.1]heptane, exo-5-aminomethyl-exo-2,3-epoxybicyclo[2.2.1]heptane) were investigated. The aminolysis of p-nitrophenyloxirane occurred regioselectively according to Krasusky rule as was proved by ¹H and ¹³C NMR data. As shown by ¹H and ¹³C NMR spectroscopy the oxyalkylation product obtained from N-benzyl-endo-5-aminomethylbicyclo[2.2.1]hept-2-ene was composed of two diastereomers originating from the presence of a chiral nitrogen atom in the rear part of the rigid bicyclic skeleton. New products of amino groups transformation in the molecules of hydroxyamines were obtained by reaction with p-methylbenzoyl chloride and p-nitrophenylsulfonyl chloride. Regioselectivity of the attack of electrophilic reagents on the nitrogen in the hydroxyamines was confirmed by IR and ¹H NMR spectra of the products. The data on pharmacological activity tests of N-2-hydroxyethyl(p-nitrophenyl)-5-aminomethylbicyclo[2.2.1]hept-2-ene are reported.     

Determination of Ni with Electrodes Modified with Mordant Violet 5

Abstract

The utility of electrodes modified with the dye Mordant Violet 5 (MV-5) for the determination of Ni is demonstrated. The method is based on the coordination of Ni from solution by an immobilized layer (via ion exchange) of the dye. Upon coordination the redox response of the dye is shifted in the negative direction by about 250 mV (from ?0.74 to ?0.97 V). The height of this peak is used as the analytical signal which is related to the concentration of Ni in solution. Linear calibration curves were obtained for Ni concentrations ranging from about 10^?4 to 2×10^?3M. Although this reflects only moderate sensitivity, a basic concept is established; this method allows for the determination of the metal via the redox response of the dye. Thus, with appropriate choice of reagents, metal ions difficult to determine by direct reduction can be determined by this method. The use of other reagents may result in enhanced sensitivity.     

Phase behavior of blends of PCBM with amorphous polymers with different aromaticity

The phase behavior of [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) blends with amorphous polymers with different degrees of aromaticity has been investigated by differential scanning calorimetry (DSC) and small‐angle neutron scattering (SANS). The polymers investigated are the homologous series of polystyrene (PS), poly(2‐vinyl‐naphthalene) (P2VN), and poly(9‐vinyl‐phenanthrene) (P9VPh). The DSC results show that the miscibility of PCBM in these polymers increases nonlinearly from 16.5 wt % in PS, 57.0 wt % in P2VN, and 74.9 wt % in P9VPh. The SANS results show that at all concentrations of PCBM, the blends are composed of two mixed phases. Analysis shows that the phase dimensions remain largely independent of PCBM content, but there is a strong dependence of the PCBM concentration difference in the two phases with increasing PCBM content. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 994–1001     

Copolymerizations of 2-hydroxyethylmethacrylate with vinylpyridines and with N-substituted methacrylamides

Studies were made of the copolymerizations of 2-hydroxyethylmethacrylate with 2-, 3- and 4-vinylpyridine. N-(trans-4′-nitro-4-stilbenyl)methacrylamide and N-(trans-4-stilbenyl)methacrylamide. Methods of Fineman-Ross, Joshi-Joshi, Tidwell-Mortimer and Tosi were employed to determine monomer reactivity ratios; the results for 2- and 4-vinylpyridine were compared with those calculated from the Q-e scheme. The monomer reactivity ratios for 2-hydroxyethylmethacrylate with vinylpyridines calculated by different methods showed good agreement. The monomer reactivity is briefly discussed.     

Properties of rubber filled with montmorillonite with various surface modifications

Layered silicate/natural rubber composites were prepared by direct polymer melt intercalation. Na‐montmorillonite Kunipia‐F and its organic derivates (organo‐clays) prepared by ion exchange were used as clay fillers. Silica (SiO₂) Ultrasil VN3, a filler commonly used in the rubber industry, was used in combination with clay fillers. The effect of clay or organo‐clay loading from 1 up to 10 phr without (0 phr) or with silica (15 phr) showed significant improvement of the tensile properties (stress at break, strain at break and modulus M100). Modification of montmorillonite by three alkylammonium cations with the same length of alkylammonium chain (18 carbons) and different structure resulted in altered reinforcing and plasticizing effects of the filler in composites with rubber matrix. Copyright © 2011 John Wiley & Sons, Ltd.     

壳聚糖固定化葡萄糖氧化酶生物传感器测定葡萄糖的含量

应用壳聚糖将葡萄糖氧化酶固定于鸡蛋膜上,结合氧电极制得葡萄糖传感器.实验表明,壳聚糖比戊二醛能更好地固定葡萄糖氧化酶,最佳条件为壳聚糖浓度0.3%、固定化酶量0.8 mg、 pH 7.0、缓冲溶液浓度300 mmol/L和温度25 ℃.本葡萄糖传感器的线性范围为0.016～1.10 mmol/L;检出限为8.0 μmol/L(S/N=3), 响应时间<60 s,有很好的稳定性,寿命>3个月.同一个传感器重复使用以及同方法制作的不同传感器之间都有很好的重现性,RSD分别为2.5%(n=10)和4.7%(n=4).实际样品中可能存在的烟酰胺、 VB6、 VB12、 VE、Ca2+、 Mg2+、 K+和Zn2+等对葡萄糖的测定不产生干扰.本传感器已成功地应用于市售饮料中葡萄糖含量的测定.     

The Reaction of Japanese Reagent with Aminoacetamide with Alkyl Group

2,4-Bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide¹,commonly known as Lawesson's reagent (LR,1a),and Japanese Reagent (1b),are not only thiating agent for diverse carbonyl compounds^1-3, but also they undergoes ring-closure reactions with contain substrates containing two functional groups to give phosphorus heterocycles which contain phosphonothioyliene {C₆H₄-P(S)〈} moiety. These heterocyclic compounds are of potential interest as herbicides,insecticides,and fungicides^4,5. Glycinamides are known as biologically active materials, for example, herbicides, plant-growth regulator⁶. In order to look for potent herbicides⁷ and to extent the use of Japanese Reagent to other bifunctional substrates,its reactions with 3-alkyl-glycinamides 2 have been investigated and found to give new phosphorus heterocycles which possess Significant selective herbicidal activity against rape. Here are our results.     

对DNA具有识别和断裂功能的金属插入剂的研究

本文详尽介绍了国际上对金属配合物与DNA 以插入方式进行识别和反应的前瞻性的工作,为设计能够与特定序列的DNA 进行识别和反应的金属配合物提供了多种策略。     

Polarographic studies of mixed hydroxy-complexes of monoethanolamine with cadmium and with lead

The composition and stability of mixed complexes of cadmium or lead with hydroxide and monoethanolamine have been determined polarographically at 25° in aqueous and aqueous methanol solutions at ionic strength 0.1M. For the aqueous solutions the results agree with those of others. In the methanolic systems the previously unreported complexes Cd(MEA)₄(OH), Pb(MEA)(OH)₃, Pb(MEA)₂(OH) and Pb(MEA)₂(OH)₂ were detected.