Synthetic and computational studies on intramolecular [2+2] sulfonyl isocyanate-olefin cycloadditions

Novel unsaturated sulfonyl isocyanates were prepared using a boron trichloride promoted thermal cleavage of the corresponding sulfonylcarbamates. Due to their moisture sensitivity, the isocyanates were directly converted into sulfonylureas in good yields. An intramolecular cycloaddition of the olefinic sulfonyl isocyanates to give β-lactam-sulfonamide hybrids was not observed experimentally. Investigation of this cycloaddition by DFT-calculations using the 6-31G* and 6-311+G** basis sets showed it to be endergonic.     

Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

Mechanically facilitated retro [4+2] cycloadditions

Poly(methyl acrylate)s (PMAs) of varying molecular weights were grown from a [4+2] cycloaddition adduct of maleimide with furan containing two polymerization initiators. Subjecting the corresponding PMA (>30 kDa) chains to ultrasound at 0 °C resulted in a retro [4+2] cycloaddition reaction, as observed by gel permeation chromatography (GPC) and UV-vis spectroscopy, as well as labeling of the liberated maleimide and furan moieties with appropriate chromophores featuring complementary functional groups. Similar results were obtained by sonicating analogous polymers that were grown from a thermally robust [4+2] cycloaddition adduct of maleimide with anthracene. The generation of anthracenyl species from these latter adducts allowed for the rate of the corresponding mechanically activated retro [4+2] cycloaddition reaction to be measured. No reduction in the number average molecular weight (M(n)) or liberation of the maleimide, furan, or anthracene moieties was observed (i) for polymers containing the cycloaddition adducts with M(n) < 20 kDa, (ii) for high molecular weight PMAs (M(n) > 60 kDa) featuring terminal cycloaddition adducts, or (iii) when the cycloaddition adducts were not covalently linked to a high molecular weight PMA. Collectively, these results support the notion that the aforementioned retro [4+2] cycloaddition processes were derived from a vectorially opposed mechanical force applied to adducts embedded within the polymer chains.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

The participation of alkynylboronates in inverse electron demand [4 + 2] cycloadditions: a mechanistic study

The participation of alkynylboronates in [4 + 2] cycloadditions has been investigated using both kinetic and DFT studies. Kinetic studies of the cycloaddition of tetrazine 1 with alkynylboronate 2 strongly suggest that a concerted cycloaddition mechanism is in operation. This mechanism has been confirmed by DFT calculations; moreover, a highly synchronous transition state appears to operate in this process. The experimentally observed poor reactivity of electron-rich dienes with alkynylboronates has also been confirmed by theoretical studies by analyzing the transition states of the cycloadditions with bis-2,5-trimethylsilyloxyfuran. The surprising conclusion has been made that alkynylboronates are relatively electron rich and have a cycloaddition reactivity that resembles that of acetylene. In contrast, the related dichloroalkynylborane cycloaddition reactivity resembles that of dimethylacetylene dicarboxylate.     

Rhodium-catalyzed intramolecular [4 + 2] cycloadditions of alkynyl halides

[reaction: see text] Cationic rhodium(I)-catalyzed intramolecular [4 + 2] cycloadditions of diene-tethered alkynyl halides were found to occur in good yields (70-87%). The halide moiety is compatible with the cycloaddition reactions, and no oxidative insertion to the alkynyl halide was observed. The halogen-containing cycloadducts could be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition.     

Synthesis and [2+4]cycloadditions of two 1-aza-1,3-butadiene-1-carbonitriles

3-Methyl- and 3-ethyl-1-aza-1,3-butadiene-1-carbonitriles were synthesized by reaction of the corresponding 3-alkylacroleins with bis(trimethylsilyl)-carbodiimide using titanium tetrachloride as catalyst. They were highly reactive and difficult to purify rigorously. Attempted anionic polymerizations gave only oligomers of molecular weight ∼500 Da. These 3-alkyl-azadienecarbonitriles cycloadded to the electron-rich olefins iso-butyl vinyl ether and p-methoxystyrene to give [2+4] cycloadducts with moderate yields.     

Transition metal-catalyzed intermolecular [5+2] and [5+2+1] cycloadditions of allenes and vinylcyclopropanes

Initial examples of the intermolecular Rh(I)-catalyzed [5+2] cycloaddition reaction of bifunctional allenes and vinylcyclopropanes are described. The reactions proceed with facility and in yields of up to 99% with a variety of alkyne-, ester-, styrene-, or cyano-substituents on the allene to afford the corresponding cycloadducts. In the presence of CO, the reaction proceeds to an eight-membered ring cycloadduct and its transannularly closed product, providing the first example of a three-component [5+2+1] cycloaddition with allenes.     

Mechanistic studies of UV assisted [4 + 2] cycloadditions in synthetic efforts toward vibsanin E

Quantum chemical DFT calculations at the B3LYP/6-31G(d) level have been used to study the stereochemical course of the photochemical cycloaddition of enone 9 with dienes. The observed products of this photochemically induced cycloaddition showed a stereoselectivity, which is opposite to what would be expected by FMO considerations. The quantum chemical calculations revealed that the unusual stereoselectivity of the reaction can be rationalized by assuming a stereospecific photochemical cis-trans isomerization of enone 9 to trans isomer 9a followed by a thermal Diels-Alder reaction of the diene onto the highly reactive trans enone. The photochemical reaction step involves the selective formation of a twisted triplet intermediate, which accounts for the selectivity of the reaction.     

Ruthenium-catalyzed [2 + 2] cycloadditions of ynamides

Ruthenium-catalyzed [2 + 2] cycloadditions between norbornene and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions, giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). [reaction: see text]     

2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

Tandem double intramolecular [4 + 2]/[3 + 2] cycloadditions of nitroalkenes

[reaction: see text]. A new class of tandem [4 + 2]/[3 + 2] cycloadditions of nitroalkenes is described in which both pericyclic processes are intramolecular. Two subclasses of intra [4 + 2]/intra [3 + 2] cycloadditions have been explored in which the dipolarophile is tethered at either C(5) or C(6) of the nitronate. For both families of precursors, the cycloadditions occur in good yield and are found to be highly regio- and stereoselective. This method converts linear polyenes to functionalized polycyclic systems bearing up to six stereogenic centers.     

Efficient nickel-catalyzed [2 + 2 + 2] cycloaddition of CO2 and diynes

A mild and general route for preparing 2-pyrones from CO2 and diynes is described. Under only 1 atm of CO2, excellent yields of pyrone are obtained using catalytic amounts of Ni(COD)2 and imidazolylidene ligand, IPr. In addition, stoichiometric reactions between the isolated complex Ni(IPr)2, diynes, and CO2 suggest that the pathway involves initial reaction with CO2 as the key step.     

Nickel-catalyzed intramolecular [4+4] cycloadditions: 2. Allylic stereoinduction and modelling studies in the preparation of bicyclo[6.4.0]dodecadienes

The extent of diastereoinduction observed in the nickel-catalyzed intramolecular [4+4] cycloaddition of tethered 1,3-dienes is shown to be highly dependent upon the steric nature of the substituents at the stereogenic center. A model for the prediction of the extent and sense of induction is presented.     

NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

Rhodium catalysed [2+2+2] cycloadditions of acetylenes

Wilkinson's catalyst RhCl(PPh₃)₃ is an effective catalyst (0.5 – 2 mole %) for the rapid intermolecular trimerisation of 1,6-heptadiynes with monoacetylenes under mild conditions.