Stability analysis of the active control system with time delay using IHB method

In this paper, the incremental harmonic balance method is employed to solve the periodic solution that a vibration active control system with double time delays generates, and the stability analysis of which is achieved by the Poincare theorem. The system stability regions can be obtained in view of time delay and feedback gain, the variation of which is also studied. It turns out that along with the increase of time delay, the active control system is not always from stable to unstable, and the system can be from stable to unstable state, whereas the system can be from unstable to stable state. The extent that the two times delays impact on the system stability region is mainly related to the relative magnitude of the two feedback gains. The system can maintain the stable state under the condition of the well-matched feedback gains. The results can provide evidence to design the control strategy of time-delayed feedback.     

线性时滞系统的离散最优控制

介绍了对线性时滞系统进行最优控制的设计,将具有时滞控制的线性系统离散后引入增广状态向量。获得不显含时滞的差分方程,根据时滞量的两种分类情况采用连续和离散形式的性能指标函数导出了最优控制律。控制律包含当前状态和此前若干步状态向量的叠加,最优控制律直接从时滞方程中得到,可保证系统的稳定性,此方法亦适用于大时滞的情况。数值算例验证了控制策略的有效性。     

智能结构有限元动力模型的建立及主动振动控制和抑制

采用一种新的压电板单元，建立了含有分布压电传感元件和执行元件结构（智能结构）的有限元动力模型。利用两种反馈控制律，研究了智能结构振动控制与抑制的问题，并提出了智能结构主动振动控制和抑制的一种方法。最后，提供了数值示例，说明本文提出方法的应用。     

结构主动控制的LQG/LTR改进方法

提出一种改进的LQG／LTR(Linear Quadratic Gaussian synthesis with a Loop Transfer Recovery)结构主动控制方法,一种新的补偿器结构被用于回路传输恢复(LTR)。这个补偿器有以下优点：(1)它是开环稳定的;(2)它能保证整个闭环系统的稳定性;(3)更重要的是．对于相同的回路传输恢复度,它所需要的增益要小于传统LQG／LTR方法的基于观测器的控制器增益。还有,就是这个新的补偿器比传统的基于观测器要有较好的恢复性能。最后,数值算例验证了本文方法的有效性。     

Active vibration control and suppression for integrated structures

Spacesmictures,aircraftstrUctures,satellitesandsoonarerequiredtobelightinweightduetotherequirementofoperation.TheyarealsolightlydampedbecauseofthelowinternaldampingofthematerialsusedintheirconstrUction.Thus,theywillgeneraiClargeamplitudevibration,whichmayreducetheprecisionofoperationandaffectthePerformanceofoperation.Itisessentialtousesuitablecontrolsystemtocontrolthevibrationofsimctures.Sincethesesmicturesaredistributedparametersystemshavinganinfinitesetofvibrationmodes,thecontrolsystemwith…     

Active control of time-delay in cutting vibration

The system dynamics of turning processes can be described by a delay differential equation. How to improve the stability and suppress the vibration of cutting is of an interesting topic. In this paper, a multiple time-delay controller is developed based on discrete optimal control method for the turning vibrations control. Numerical simulations are carried out to verify the efficiency of the controller. Results indicate the designed controller can suppress the cutting vibration efficiently and improve the stability of the cutting processes. The influence of designed time-delay and sampling time on the control performance is also discussed.     

结构主动开闭环多重调谐质量阻尼器（AMTMD）新控制策略

提出了一种新控制策略——主动开闭环多重调谐质量阻尼器(AMTMD)。AMTMD控制系统频率呈线性分布。AMTMD中的MTMD保持相同的刚度和阻尼系数但质量变化。基于TMD的工作原理定义了AMTMD的主动控制力构成即保持相同的位移和速度反馈增益系数但变化结构和地震加速度反馈增益系数。基于结构的广义振型模型，导出了设置AMTMD时结构的动力放大系数(DMF)，于是优化准则可定义为：Min．Min．Max．DMF．通过最优搜寻，研究了反映AMTMD有效性和鲁棒性的参数。这些参数包括：频率间隔、平均阻尼比、调谐频率比、总数、质量比和标准化加速度反馈增益系数。为了比较，多重调谐质量阻尼器(MTMD)和主动开闭环调谐质量阻尼器(ATMD)也被考虑。     

The hybrid control of vibration of thin plate with active constrained damping layer

This paper concerns in the active and passive hybrid control of vibration of the thin plate with Local Active Constrained damping Layer (LACL). The governing equations of system are formulated based on the constitutive equations of elastic, viscoelastic, piezoelectric materials. Galerkin method and GHM method are employed to transform partial differential equations into ordinary ones with a lower dimension. LQR method of classical control theory is used in simulating calculation. Numeral results show that the active and passive hybrid control manner obtained in this paper is a better one for vibration control of the plate. Project supported by the National Science Foundation of China (19632001) and the Research Foundation of Xian Jiaotong University     

时滞线性系统振动主动控制的滑移模态方法

直接从时滞微分方程求解控制律，对时滞线性系统振动主动控制的滑移模态方法进行了研究，并给出了控制具体实现过程。推导出的切换面和控制律表达式中，除了包含有当前的状态反馈外，还包含有前若干步控制的线性组合。算例结果显示，所提控制方法能够较好地控制系统的峰值响应。且能够保证控制系统的稳定性；若按无时滞控制设计对地滞系统进行振动控制，系统响应有可能出现发散。     

介电弹性作动器主动隔振模糊控制试验研究

采用模糊控制策略,开展介电弹性作动器的主动隔振性能试验研究。基于介电弹性材料的Maxwell应力模型建立了作动器的力电耦合模型,分析了作动器的非线性特性;针对隔振系统设计了Mamdani型模糊控制器,建立了控制电压信号与振动响应之间的关系;在此基础上,开展了介电弹性作动器主动隔振试验研究,并与加速度反馈控制进行了对比。试验结果表明,在相同驱动电压的情况下,基于模糊控制策略的主动隔振性能要优于加速度反馈控制,且能够显著降低由于非线性驱动力导致的倍频响应幅值,有助于提高隔振系统的稳定性。     

Nonlinear dynamic response and active vibration control of the viscoelastic cable with small sag

IntroductionCablesareveryefficientstructuralmembersandhencehavebeenwidelyusedinmanylong_spanstructures,includingcable_supportbridges,guyedtowersandcable_supportroofs.Sincecablesarelight,veryflexibleandlightlydamped ,structuresutilizingcables,i.e .,cable_structuresystems,usuallyhavevariousdynamicproblems.Theirmodelsarethereforeverimportantinpredictingandcontrollingtheirresponses.Inthelastdecade,thenonlineardynamicvibrationandstabilitybehaviorofcablesandcable_structureshavedrawntheattentionofman…     

Parametric vibration stability and active control of nonlinear beams

The vibration stability and the active control of the parametrically excited nonlinear beam structures are studied by using the piezoelectric material. The velocity feedback control algorithm is used to obtain the active damping. The cubic nonlinear equation of motion with damping is established by employing Hamilton’s principle. The multiple-scale method is used to solve the equation of motion, and the stable region is obtained. The effects of the control gain and the amplitude of the external force on the stable region and the amplitude-frequency curve are analyzed numerically. From the numerical results, it is seen that, with the increase in the feedback control gain, the axial force, to which the structure can be subjected, is increased, and in a certain scope, the structural active damping ratio is also increased. With the increase in the control gain, the response amplitude decreases gradually, but the required control voltage exists a peak value.     

微重力下Stewart平台的主动减振系统研究分析

Stewart平台是一种并联减振机构,因其具有承载能力强、刚度大、结构稳定、精度高等优点,广泛应用于航天航空和精密仪器领域。采用Cubic构型Stewart平台并对压电陶瓷的力一位移关系线性化后,可简化成单自由度的线性主动控制系统,对六自由度的Stewart平台分散控制,在随机平稳白噪声的激励下考虑时滞影响,并对其解耦后的Stewart平台进行LQR数值分析,用Adams预测公式进行时滞补偿。分析结果表明：Stewart平台具有较好的减振性能,能有效减小平台在微重力干扰下引起的位移反应;时滞因素会降低LOR的控制作用;可通过Adams预测公式对时滞影响进行较好地补偿。     

线性系统模态控制及其时滞补偿

对线性系统模态控制及其时滞补偿进行研究。模态控制分控制全部模态和控制有限模态两种情况 ,时滞补偿采用移相补偿。最后结合算例对两种控制模态下的控制效果和控制有限模态时的时滞补偿进行了数值计算和结果对比     

A hybrid multi-degree-of-freedom vibration isolation platform for spacecrafts by the linear active disturbance rejection control

The hybrid vibration isolation, which takes advantages of both the passive and active approaches, has been an important solution for space missions. The objective of this paper is to design a vibration isolation platform for payloads on spacecrafts with the robust, wide bandwidth, and multi-degree-of-freedom(MDOF). The proposed solution is based on a parallel mechanism with six voice-coil motors(VCMs) as the actuators. The linear active disturbance resistance control(LADRC) algorithm is used for the active control. Numerical simulation results show that the vibration isolation platform performs effectively over a wide bandwidth, and the resonance introduced by the passive isolation is eliminated. The system robustness to the uncertainties of the structure is also verified by simulation.     

基于LQG最优控制法的压电智能结构独立模态空间控制

采用压电材料作为传感器和驱动器对智能结构振动主动控制进行研究,基于机电耦合的压电智能结构传感和驱动方程,将振动控制动力学方程变换到模态空间对方程进行解耦。通过计算结构最大应变,确定压电元件的最佳粘贴位置。考虑到系统过程噪声和量测噪声的影响,设计Kalman滤波器,采用基于线性二次型高斯(LQG)最优控制的独立模态空间控制方法对压电智能结构的振动进行控制。最后以压电智能悬臂梁为例进行控制仿真,验证了此方法的有效性。     

Nonlinear integral resonant controller for vibration reduction in nonlinear systems

A new nonlinear integral resonant controller (NIRC) is introduced in this paper to suppress vibration in nonlinear oscillatory smart structures. The NIRC consists of a first-order resonant integrator that provides additional damping in a closed-loop system response to reduce high-amplitude nonlinear vibration around the fundamental reso-nance frequency. The method of multiple scales is used to obtain an approximate solution for the closed-loop system. Then closed-loop system stability is investigated using the resulting modulation equation. Finally, the effects of different control system parameters are illustrated and an approximate solution response is verified via numerical simulation results. The advantages and disadvantages of the proposed controller are presented and extensively discussed in the results. The controlled system via the NIRC shows no high-amplitude peaks in the neighboring frequencies of the resonant mode, unlike conventional second-order compensation methods. This makes the NIRC controlled system robust to excitation frequency variations.     

Design and experimental verification of multiple delay feedback control for time-delay nonlinear oscillators

This study aims to show that a multiple delay feedback control method can stabilize unstable fixed points of time-delay nonlinear oscillators. The boundary curves of stability in a control parameter space are derived using linear stability analysis. A simple procedure for designing a feedback gain is provided. The main advantage of this procedure is that the designed controller can stabilize a system even if the controller delay times are long. These analytical results are experimentally verified using electronic circuits.     

PI force feedback control for large flexible structure vibration with active tendons

Active tendon, consisting of a displacement actuator and a collocated force sensor, was first presented by Preumont and his co-workers to attenuate the vibration of large flexible space structures, and the control algorithm adopted by them was integral force feedback. This paper presents a new proportional-integral （PI） force feedback algorithm to achieve larger damping ratios for the structure without the requirement of structure model. Stability of the control system is shown, and simulations of a structure similar to JPL-MPI demonstrate the effectiveness of the proposed algorithm for vibration control of space structures.     

REDUCTION APPROACHES FOR VIBRATION CONTROL OF REPETITIVE STRUCTURES

The reduction approaches are presented for vibration control of symmetric, cyclic periodic and linking structures. The condensation of generalized coordinates, the locations of sensors and actuators, and the relation between system inputs and control forces are assumed to be set in a symmetric way so that the control system posses the same repetition as the structure considered. By employing proper transformations of condensed generalized coordinates and the system inputs, the vibration control of an entire system can be implemented by carrying out the control of a number of sub-structures, and thus the dimension of the control problem can be significantly reduced.