共查询到19条相似文献,搜索用时 71 毫秒
1.
2.
树枝状尼龙6的合成与研究 总被引:2,自引:0,他引:2
用单羧基封端的尼龙6分别与树枝状聚酰胺-胺(PAMAM)的G1代和G2代外围活泼氨基进行缩聚反应,合成出具有规整结构的由核心向外发散增长的树枝状尼龙6,采用红外光谱、扫描电镜、DSC和TGA对缩聚物进行了分析。 相似文献
3.
4.
以1.0代聚酰胺-胺(PAMAM)为配体骨架,氯代二苯基膦为原料,通过取代反应合成了1种含有较大空间位阻的新型树枝状PNP配体,再以Cr Cl3(THF)3为络合试剂,通过络合反应合成树枝状PNP铬催化剂.采用傅里叶变换红外光谱(FTIR)、紫外-可见分光光度计(UV-Vis)、核磁共振波谱(NMR)、电喷雾电离质谱(ESI-MS)和元素分析等手段证实合成的新型树枝状PNP配体及其铬催化剂的结构与理论设计的结构一致.以甲基铝氧烷(MAO)为助催化剂,对乙烯齐聚反应进行了研究,考察了溶剂种类、反应温度、反应压力及Al/Cr摩尔比对该催化剂活性和选择性的影响.结果表明,以甲苯为溶剂,MAO为助催化剂,当反应温度为25℃,反应压力为0.9 MPa,Al/Cr摩尔比为500时,该催化剂的活性高达2.15×105g/(mol Cr·h),催化剂对乙烯三聚、四聚反应的选择性共达到36.76%. 相似文献
5.
6.
7.
采用微波辅助合成技术,快速制备以聚酰胺-胺(poly(amidoamine),PAMAM)树枝状分子为固定相的开管毛细管电色谱柱.与常规合成方法相比,微波辅助合成法可以提高反应速度,极大地缩短制备周期.在pH 5.7~8.0范围内, 随着PAMAM树枝状分子代数的增加,毛细管电渗流(EOF)逐步下降.对丙氨酸和脯氨酸进行分离的实验结果表明,随着PAMAM树枝状分子代数的增加,分离度逐步增大,3代PAMAM树枝状分子修饰的毛细管柱具有良好的分离效果.以丙酮标记物连续测定10 d,柱效下降3.85%, 表明采用微波辅助合成技术制得的PAMAM树枝状分子修饰的毛细管柱具有良好的稳定性. 相似文献
8.
9.
10.
聚酰胺—胺型树枝状高分子PAMAM溶液的特性粘度 总被引:1,自引:0,他引:1
测定了树状高分子PAMAM(聚酰胺-胺型,乙二胺为内核)及其季铵盐在水溶液中的特性粘度「η」,结果表明,PAMAM的「η」在代数G=2 ̄3处有最大值,而其季铵盐则在此处有最小值,同时发现高分子的流体力学等效圆球半径Rη随G增大近似线性增长,通过对PAMAM及其季铵盐特性粘度的研究,揭示了不同代数高分子结构形态的变化规律。 相似文献
11.
M Suguna LakshmiB.S.R Reddy 《European Polymer Journal》2002,38(4):795-801
New epoxide and cyanate ester resins with an aromatic ester backbone namely 1,3-[di-(4-glycidyloxy diphenyl-2,2′-propane)]-isophthalate (DGDPI) and 1,4-[di-(4-cyanato diphenyl-2,2′-propane)]-terephthalate (DCDPT) were synthesized and the intermediates were characterized by IR, 1H-/13C-NMR spectroscopic methods. The cured products from DGDPI and DHDPI exhibited higher Tg compared with standard epoxy system. The increase in the Tg may be due to the cyanate ester and rigid aromatic backbones present in the curing system. 相似文献
12.
13.
Bradley K. Coltrain Wayne T. Ferrar John M. Salva 《Journal of polymer science. Part A, Polymer chemistry》1993,31(9):2261-2269
The synthesis and characterization of poly(itaconate ester)s with short poly(ethylene oxide) side chains have been studied. It was found that the monomer syntheses via esterification of itaconic acid resulted in incomplete esterification leaving up to 35 mol % monomers with carboxylic acid functionality. These acid groups were then incorporated into the polymers. This acid incorporation has not previously been reported, nor have the properties of the copolymers been studied. Techniques were developed to effectively remove the acid impurities to generate pure homopolymers. Titration and gas chromatographic techniques were developed to study the amount of acid impurity in the monomers, and titration was also used to characterize the polymers. Size exclusion chromatography and differential scanning calorimetry were used to study both the homopolymers and copolymers. It was found that the location and breadth of the glass transition is a function of acid content. Finally, isomerization of the itaconate monomers to the inactive mesaconate was also found to be a problem during the synthesis. Pure mesaconate and citraconate monomers were synthesized and characterized by 1H-NMR. © 1993 John Wiley & Sons, Inc. 相似文献
14.
Junchen Zhu Kailong Yuan Yue Xie Huabing Liu Huiqing Jin Cuirong Sun Hongru Feng Qi Li Yuanjiang Pan 《Journal of separation science》2023,46(23):2300415
Sucrose esters (SEs) are crucial tobacco smoke flavor precursors and play a significant role in tobacco's functionality. Due to their structural complexity, the separation and analysis of SEs in tobacco remain a major challenge, and massive structures of SEs have not yet been fully identified. In this study, the fractions enriched in SEs were obtained from oriental and flue-cured tobacco through a series of pretreatments, and two types of SEs (Types I and II) were distinguished by liquid chromatography-tandem mass spectrometry (LC-MSn) analysis, with Type II SEs newly characterized in tobacco. Five groups of main SEs were further purified using preparative high-performance LC (HPLC) coupled to an evaporative light scattering detector, and their structures were characterized by nuclear magnetic resonance spectrometry techniques including 1H, 13C, correlation spectroscopy, heteronuclear single quantum correlation, and heteronuclear multiple bond correlation. By combining LC-MSn and nuclear magnetic resonance spectrometry, the structures of eight SE isomers were finally proposed, of which four were newly identified. These findings further enhance the understanding of the structural diversity of SEs in tobacco, serving as a valuable reference for future research on the elucidation, synthesis, and metabolism of SEs. 相似文献
15.
Luís Cruz Joana L.C. Sousa Andreia Marinho Nuno Mateus Victor de Freitas 《Tetrahedron letters》2017,58(2):159-162
The synthesis and structural characterization by LC–MS and NMR of novel pyranoluteolinidin derivatives are reported. The compounds result from the reactions between luteolinidin and three different carboxylic acids in wine model-like solutions. The three pigments possess different substituents attached to the D ring (methyl, catechol and dimethylaminophenyl groups) and the same catechol group in the B ring, yielding a wide spectrum of colors from yellow to pink-purple. 相似文献
16.
17.
J. C. Abed R. Mercier J. E. McGrath 《Journal of polymer science. Part A, Polymer chemistry》1997,35(6):977-987
Several aromatic dicyanate monomers have been synthesized bearing para-linked strong electron withdrawing groups, such as phenylphosphine oxide, sulfone, and carbonyl. These groups increased the reactivity of the cyanate functional groups and eliminated the need for curing catalysts. However, an undesirable decrease in the processing window between the monomer melting point and the onset of cure was also generally observed. An arylene ether phenyl phosphine oxide system was designed that displayed several attractive characteristics such as a low softening point, a wide processing window, cure with no catalyst, high Tg and high char yield in air, suggesting that these new thermosets might show good fire resistance. The dicyanate ester monomers were synthesized in high yield by reacting various bisphenols with cyanogen bromide in the presence of triethylamine. The high reactivity of the cyanate functional groups required that the cyanation reaction be conducted at temperature below 0°C in order to prevent imidocarbonate side reactions. Proton NMR and FT-IR were used to characterize these monomers. The cyclotrimerization curing process was monitored by the disappearance of the carbon-nitrogen triple bond stretch (2270 cm−1). An optimal cure schedule was determined and the cured polycyanurate networks were characterized by DSC, DMTA, and TGA. Tg values were typically > 250°C and 5% weight loss values were observed by TGA in air above 400°C. Several of the dicyanate monomers with sufficiently large processing windows were cured into single lap shear adhesive bonds onto titanium 6/4 and the measurements are reported herein. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 977–987, 1997 相似文献
18.
Jie Kong Xiaodong Fan Qingfa Si Guobin Zhang Shengjie Wang Xin Wang 《Journal of polymer science. Part A, Polymer chemistry》2006,44(12):3930-3941
The synthesis, characterization, and structure regulation of hyperbranched polycarbosiloxane with dendritic boron cores were realized in this paper. First, dendritic boron core was synthesized via hydroboration with borane dimethylsulfide and bis(allyloxy)dimethylsilane. Then, the hyperbranched polycarbosiloxanes with dendritic boron cores were synthesized via hydrosilylation with AB2 type monomer of bis(allyloxy)methylsilane and dendritic boron cores. The molecular structures of the dendritic boron core and resulting hyperbranched polymers were characterized by using Fourier transform infrared spectroscopy, 1H nuclear magnetic resonance, and 13C nuclear magnetic resonance spectroscopies. Size exclusion chromatography/multiangle laser light scattering analysis reveals that the structures of hyperbranched polycarbosiloxane can be regulated effectively by incorporation of functional dendritic boron cores. Compared with hyperbranched polycarbosiloxane of the same molecular weight level, the hyperbranched polycarbosiloxane with dendritic boron cores presents narrower molecular weight distribution as well as much smaller hydrodynamic radius and intrinsic viscosity. Thermalgravimetric analyzer analysis indicates that both the decomposition temperature and ceramic yields are increased as the results of the incorporation of dendritic boron cores into hyperbranched polycarbosiloxane. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3930–3941, 2006 相似文献