Investigations on the presence of electrical frequency on the characteristics of energy harvesters under base and galloping excitations

The characteristics and performance of piezoelectric energy harvesters concurrently subjected to galloping and base excitations when using a complex electrical circuit are studied. The considered energy harvester is composed of a bilayered cantilever beam with a square cylindrical structure at its tip. Euler–Bernoulli beam theory, nonlinear quasi-steady hypothesis, and Galerkin method are used to develop a reduced order model of this system. The electrical circuitry of the harvester consists of a load resistance, a capacitance, and an inductance. The impacts of the electrical components of the harvester’s circuitry, the wind speed, and the base excitation frequency and acceleration on the broadband characteristics of the harvester, quenching phenomenon, and appearance of new nonlinear behaviors are deeply investigated and discussed. Different methods were used to characterize the new nonlinear phenomena that took place due to mechanical electrical interaction like the power spectrum and time history. When both coupled frequencies of electrical and mechanical types exist and are far from each other, it is shown that the quenching phenomenon is only related to the coupled frequency of mechanical type. It was also proven that this configuration results on high harvested power with low displacement near the electrical frequency. On the other hand, for a well-defined choice of the electrical components, the results show that a broadband configuration of the harvester can be designed. It is also indicated that the quenching phenomenon interacts with the appearance of hysteresis regions that depends on the value of the base acceleration and initial conditions. Moreover, it was shown that the presence of this inductance may result in broadband system harvesting more power from both galloping and base excitation.     

双稳态电磁式振动能量捕获器超谐波响应研究

超谐波响应是非线性振动系统在较大激励下表现的特性,在某种条件下双稳态振动能量捕获系统的超谐波响应可使系统产生优越的输出功率。本文将质量-非线性弹簧-阻尼系统与双稳态振动能量捕获器相结合,提出了附加非线性振子的双稳态电磁式振动能量捕获器,建立系统的力学模型及控制方程。采用两项式谐波平衡法,获得了双稳态系统在简谐激励下产生大幅运动的基谐波和超谐波响应的解析解,借助数值仿真分析了质量比和调频比对双稳态振动能量捕获器产生大幅运动的影响规律,获得了双稳态系统的结构参数的最佳配置范围,且当外部激励频率处于低频段时,系统发电主要表现为超谐波发电,随着激励频率的增大,振动发电系统主要呈现基谐波发电。上述研究,为双稳态能量捕获装置的理论研究提供了参考。     

Global nonlinear distributed-parameter model of parametrically excited piezoelectric energy harvesters

A global nonlinear distributed-parameter model for a piezoelectric energy harvester under parametric excitation is developed. The harvester consists of a unimorph piezoelectric cantilever beam with a tip mass. The derived model accounts for geometric, inertia, piezoelectric, and fluid drag nonlinearities. A reduced-order model is derived by using the Euler–Lagrange principle and Gauss law and implementing a Galerkin discretization. The method of multiple scales is used to obtain analytical expressions for the tip deflection, output voltage, and harvested power near the first principal parametric resonance. The effects of the nonlinear piezoelectric coefficients, the quadratic damping, and the excitation amplitude on the output voltage and harvested electrical power are quantified. The results show that a one-mode approximation in the Galerkin approach is not sufficient to evaluate the performance of the harvester. Furthermore, the nonlinear piezoelectric coefficients have an important influence on the harvester’s behavior in terms of softening or hardening. Depending on the excitation frequency, it is determined that, for small values of the quadratic damping, there is an overhang associated with a subcritical pitchfork bifurcation.     

Energy harvesting from the secondary resonances of a nonlinear piezoelectric beam under hard harmonic excitation

Meccanica - This paper investigates the dynamical response of a nonlinear piezoelectric energy harvester under a hard harmonic excitation and assesses its output power. The system is composed of a...     

线绳驱动转速提升式低频俘能器的设计与研究

俘获周围环境中丰富的低频机械能对减少废旧电池数量、实现自维持传感器、降低传感器网络的使用和维护成本等具有重要意义, 但传统的振动型俘能器对低频机械能的俘获效果不佳. 为了有效收集周围环境中的低频机械能, 本文提出一种线绳驱动、具备转速提升功能的电磁式俘能器, 首先借助线绳驱动转轴结构将低频振动转换为双向旋转运动, 再通过刚度自动改变的拨片和磁齿轮将双向旋转运动转换为转速更高的单向旋转运动, 从而提高输出功率. 对所提出的俘能器建立了机电耦合动力学模型, 并通过样机制作和实验测试证实了理论模型的正确性. 实验研究表明, 在激励幅值40 mm和激励频率2 Hz的条件下, 通过本文设计制作的2.5倍转速提升功能的磁齿轮, 可将线绳驱动电磁式俘能器的最大输出功率增加至7.82 mW, 比对应的无磁齿轮提升转速的线绳驱动电磁式俘能器的最大输出功率(3.22 mW)高约143%. 在相同的激励条件下, 制作的俘能器的交流电能经过桥式整流器转换为直流后, 可在1.2 s内将220 μF储能电容器的电压从0 V提升至1.5 V. 在低频、不规则的振动激励下, 所制作的俘能器仍可提供0.35 mW的输出功率, 为设计高性能低频俘能器提供一条可行的解决方案.      

参数和直接激励下非线性压电俘能器性能分析的多尺度法

考虑几何非线性、阻尼非线性和梁的轴向不可伸长条件,利用Hamilton变分原理,建立了参数激励和直接激励下压电俘能器的非线性力电耦合的运动微分方程;利用Galerkin法,将所建立的动力学偏微分方程降阶为力电耦合的Mathieu-Duffing型方程;采用多尺度法获得了梁的位移和输出电压的解析表达式,给出了解的稳定性条件;利用解析表达式研究了单独参数激励以及参数激励和直接激励共同作用下阻尼系数对压电俘能器性能的影响。结果表明,在参数激励情况下,线性阻尼会显著影响超临界分岔点的位置,非线性二次阻尼不会影响超临界分岔点的位置。参数激励和直接激励的结合可以作为提升压电能量俘获器性能的解决方案。     

磁耦合式双稳态宽频压电俘能器的设计和俘能特性

为了同时提高振动能量俘获系统的效率和实用性, 俘能器主结构的振动特性与环境振动特性的匹配度显得尤为重要. 非线性系统复杂的动力学行为为设计高效的俘能器奠定了基础, 但结构一旦被设计、生成出来, 其工作频率往往是固定的, 无法根据环境中的振动而发生相应的改变. 本文利用可移动铰支座和非线性磁力设计了一种具有双稳态特性的宽频压电俘能器, 通过拓宽压电俘能器的工作频带, 来匹配环境中较宽的振动频率. 为了保证系统低频宽带的俘能效果, 详细分析了结构的长度比、磁间距、负载阻抗、外激励频率和幅值等对系统线性刚度、非线性刚度以及动力学行为的影响, 并进行了实验验证. 首先将系统简化为欧拉-伯努力梁, 利用拉格朗日方程建立系统的非线性动力学方程, 并利用谐波平衡法进行求解. 针对理论分析给出的不同外激励频率下的最优长度比, 搭建了实验平台进行验证. 理论和实验的结果表明: 非线性磁力的引入使系统呈现负刚度特性, 使俘能器能够在单稳态和双稳态之间的变换, 实现低频俘能效果; 通过调节可移动铰支座的位置, 改变系统的长细比, 能够实现从0到16 Hz的宽频俘能效果.      

Dynamic analysis of piezoelectric energy harvester under combination parametric and internal resonance: a theoretical and experimental study

In this work, theoretical and experimental analysis of a piezoelectric energy harvester with parametric base excitation is presented under combination parametric resonance condition. The harvester consists of a cantilever beam with a piezoelectric patch and an attached mass, which is positioned in such a way that the system exhibits 1:3 internal resonance. The generalized Galerkin’s method up to two modes is used to obtain the temporal form of the nonlinear electromechanical governing equation of motion. The method of multiple scales is used to reduce the equations of motion into a set of first-order differential equations. The fixed-point response and the stability of the system under combination parametric resonance are studied. The multi-branched non-trivial response exhibits bifurcations such as turning point and Hopf bifurcations. Experiments are performed under various resonance conditions. This study on the parametric excitation along with combination and internal resonances will help to harvest energy for a wider frequency range from ambient vibrations.

     

Influence of excitation amplitude on the characteristics of nonlinear butyl rubber isolators

The purpose of this study is to explore the advantages and characteristics of nonlinear butyl rubber (type IIR) isolators in vibratory shear by comparison with linear isolators. It is known that the mechanical properties of viscoelastic materials exhibit significant frequency and temperature dependence, and in some cases, nonlinear dynamic behavior as well. Nonlinear characteristics in shear deformation are reflected in mechanical properties such as stiffness and damping. Furthermore, even when the excitation amplitude is small the response amplitude may often be large enough that nonlinearities cannot be ignored. The treatment involves developing phenomenological models of the effective storage modulus and effective loss factor of a rubber isolator material as a function of excitation amplitude. The transmissibility of a nonlinear viscoelastic isolator is compared with that of a linear isolator using an equivalent linear damping coefficient. Forced resonance vibration and impedance tests are used to characterize nonlinear parameters and to measure the normalized transmissibility. It is found that as the excitation amplitude of the nonlinear viscoelastic isolator increases, the response amplitude decreases and the transmissibility is improved over that of the linear isolator for excitation frequency that exceeds a particular value governed by the temperature and excitation amplitude. The method of multiple scales and numerical simulations are used to predict the response characteristics of the isolator based on the phenomenological modeling under different values of system parameters.     

基于人体运动的压电-电磁混合式振动能量采集研究

将人体运动产生的动能转化为可利用的电能为传感器供电一直是能量采研究中的一个热点。如何有效利用人体运动,增强环境适应能力以及提高能量采集性能仍是俘能研究中需要解决的关键问题。本文基于人体运动特性,设计了一种新型的混合式能量采集器,同时具有压电和电磁转化机制。压电俘能是基于压电梁变形产生电能,电磁发电机采用堆叠磁组构型来切割线圈产生电动势。首先建立了混合式能量采集器的动力学理论模型,用来描述输出电压特性,并与实验进行了对比验证。理论与实验研究均表明,混合式俘能器的输出电压在一定激励频率范围内出现两个波峰。通过调节压电梁长度,可以改变峰值大小以及两个峰值间的频段范围。人体运动实验表明,混合式俘能器中可以在短时间内提供较高的电压输出,比如当跑步速度为5km/h时,3s内就可以输出1.1V直流电压驱动传感器工作;跑步时长为30s时,传感器正常工作时常可以达到77s。本文设计的混合式俘能器不仅可以快速供电,还具有较强的续航能力,这为电池充电或传感器供电提供了潜在的应用价值。     

Nonlinear characterization of concurrent energy harvesting from galloping and base excitations

An energy harvester is proposed to concurrently harness energy from base and galloping excitations. This harvester consists of a triangular cross-sectional tip mass attached to a multilayered piezoelectric cantilever beam and placed in an incompressible flow and subjected to a harmonic base excitation in the cross-flow direction. A coupled nonlinear-distributed-parameter model is developed representing the dynamics of the transverse degree of freedom and the generated voltage. The galloping force and moment are modeled by using a nonlinear quasi-steady approximation. Under combined loadings and when the excitation frequency is away from the global natural frequency of the harvester, the response of the harvester mainly contains these two harmonic frequencies. Thus, the harvester’s response is generally aperiodic and is either periodic with large period (i.e., period- \(n\) ), or quasi-periodic, or chaotic. To characterize the harvester’s response under a combination of vibratory base excitations and aerodynamic loading, we use modern methods of nonlinear dynamics, such as phase portraits, power spectra, and Poincaré sections. A further analysis is then performed to determine the effects of the wind speed, frequency excitation, base acceleration, and electrical load resistance on the performance of the harvester under separate loadings.     

Piezoelectric energy harvesting from concurrent vortex-induced vibrations and base excitations

We investigate the potential of using a piezoelectric energy harvester to concurrently harness energy from base excitations and vortex-induced vibrations. The harvester consists of a multilayered piezoelectric cantilever beam with a circular cylinder tip mass attached to its free end which is placed in a uniform air flow and subjected to direct harmonic excitations. We model the fluctuating lift coefficient by a van der Pol wake oscillator. The Euler–Lagrange principle and the Galerkin procedure are used to derive a nonlinear distributed-parameter model for a harvester under a combination of vibratory base excitations and vortex-induced vibrations. Linear and nonlinear analyses are performed to investigate the effects of the electrical load resistance, wind speed, and base acceleration on the coupled frequency, electromechanical damping, and performance of the harvester. It is demonstrated that, when the wind speed is in the pre- or post-synchronization regions, its associated electromechanical damping is increased and hence a reduction in the harvested power is obtained. When the wind speed is in the lock-in or synchronization region, the results show that there is a significant improvement in the level of the harvested power which can attain 150 % compared to using two separate harvesters. The results also show that an increase of the base acceleration results in a reduction in the vortex-induced vibrations effects, an increase of the difference between the resonant excitation frequency and the pull-out frequency, and a significant effects associated with the quenching phenomenon.     

双稳态压电俘能器的簇发振荡与俘能效率分析

本文从理论上分析了双稳态压电俘能器在高频激励下的动力学行为和低频激励下的簇发振荡, 旨在为系统找到多条高能轨道从而提高俘能效率. 首先, 介绍了双稳态压电俘能器的结构以及一般模型. 与工程上研究俘能器的目的不同, 本文主要从动力学方面分析了俘能器的运动, 电压输出与效率, 包括高频激励下系统的低能阱内周期运动、阱间混沌运动等, 并说明了单个低频激励下双稳态压电俘能器会在阱间高能轨道上发生簇发振荡, 但在阱内低能轨道上只做周期运动. 同时, 结合振幅以及势阱深度等因素对簇发振荡的存在性和强度进行分析. 为了说明高能轨道与低能轨道对系统俘能效率的影响, 讨论了不同的等效阻尼、负载电阻下俘能器输出电压的变化, 找到了最优匹配. 最后, 对于多个低频外激励的情况, 从不同的轨道组合模式上得到了双高能簇发振荡模式输出的电压最大, 其次是单高能簇发振荡与单低能周期振荡的组合模式, 输出电压最低的是双低能周期振荡模式. 并与单个外激励进行对比, 表现了多个激励的良好性能.      

Effects of nonlinear piezoelectric coupling on energy harvesters under direct excitation

A nonlinear analysis of an energy harvester consisting of a multilayered cantilever beam with a tip mass is performed. The model takes into account geometric, inertia, and piezoelectric nonlinearities. A combination of the Galerkin technique, the extended Hamilton principle, and the Gauss law is used to derive a reduced-order model of the harvester. The method of multiple scales is used to determine analytical expressions for the tip deflection, output voltage, and harvested power near the first global natural frequency. The results show that one- or two-mode approximations are not sufficient to produce accurate estimates of the voltage and harvested power. A parametric study is performed to investigate the effects of the nonlinear piezoelectric coefficients and the excitation amplitude on the system response. The effective nonlinearity may be of the hardening or softening type, depending on the relative magnitudes of the different nonlinearities.     

On the identification of non-linear mechanical systems using orthogonal functions

Real world mechanical systems present non-linear behavior and in many cases simple linearization in modeling the system would not lead to satisfactory results. Coulomb damping and cubic stiffness are typical examples of system parameters currently used in non-linear models of mechanical systems. This paper uses orthogonal functions to represent input and output signals. These functions are easily integrated by using a so-called operational matrix of integration. Consequently, it is possible to transform the non-linear differential equations of motion into algebraic equations. After mathematical manipulation the unknown linear and non-linear parameters are determined. Numerical simulations, involving single and two degree-of-freedom mechanical systems, confirm the efficiency of the above methodology.     

线形?拱形组合梁式三稳态压电俘能器动力学特性研究

利用振动能量俘获技术将设备工况振动能转化为电能, 为实现煤矿井下无线监测节点自供电提供了新的思路. 通过引入非线性磁力设计了一种线形?拱形组合梁式三稳态压电俘能器, 分析了磁铁水平间距、垂直间距和激励加速度对动力学特性的影响规律. 利用磁偶极子法建立磁力模型, 通过实验测量线形?拱形组合梁的恢复力, 并采用多项式拟合得到恢复力模型, 基于欧拉?伯努利梁理论和拉格朗日方程建立系统的动力学模型, 从时域角度仿真分析了磁铁水平间距、垂直间距和激励加速度对系统动力学特性的影响规律. 研制线形?拱形组合梁式三稳态压电俘能器样机并搭建实验平台进行实验研究, 通过采集组合梁末端响应速度数据, 验证了理论分析的正确性. 研究表明: 引入非线性磁场能够使系统势能呈现单势阱、双势阱或三势阱, 激励一定时, 调整磁铁水平间距和垂直间距能够使系统实现单稳态、双稳态或三稳态运动, 且在三稳态运动时响应位移较大, 增大激励水平有利于系统越过势垒实现大幅响应. 研究为线形?拱形组合梁式三稳态压电俘能器的设计提供了理论指导.      

Effects of springs on a pendulum electromechanical energy harvester

This paper studies a model of energy harvester that consists of an electromechanical pendulum system subjected to nonlinear springs. The output power is analyzed in terms of the intrinsic parameters of the device leading to optimal parameters for energy harvesting. It is found that in an appropriate range of the springs constant, the power attains higher values as compared to the case without springs. The dynamical behavior of the device shows transition to chaos.     

低频螺旋状压电俘能器结构性能分析

利用螺旋状双晶片压电梁式俘能器可以有效地从低频工作环境中提取能量.由于这种俘能结构振动中存在弯曲振动和伸缩振动两种模态,确定俘能器的最优工作模态非常重要,这样外载作用型式(即面内受载还是面外受载)对俘能器的影响较大.数值结果表明:外激励方向不同时,最大输出功率密度出现在不同阶数的固有频率处,并且最大输出功率密度的大小也显著不同,面内加载方式明显优于面外加载方式.最后还详细讨论了储能电路的阻抗,自由端悬挂的集中质量对俘能器性能的影响规律.     

Energy harvesting from quasi-periodic vibrations using electromagnetic coupling with delay

In this paper, we study quasi-periodic vibrational energy harvesting in a delayed self-excited oscillator with a delayed electromagnetic coupling. The energy harvester system consists in a delayed van der Pol oscillator with delay amplitude modulation coupled to a delayed electromagnetic coupling mechanism. It is assumed that time delay is inherently present in the mechanical subsystem of the harvester, while it is introduced in the electrical circuit to control and optimize the output power of the system. A double-step perturbation method is performed near a delay parametric resonance to approximate the quasi-periodic solutions of the harvester which are used to extract the quasi-periodic vibration-based power. The influence of the time delay introduced in the electromagnetic subsystem on the performance of the quasi-periodic vibration-based energy harvesting is examined. In particular, it is shown that for appropriate values of amplitudes and frequency of time delay the maximum output power of the harvester is not necessarily accompanied by the maximum amplitude of system response.     

面内压电振动能量采集动力学设计与性能研究

压电振动能量采集将环境中普遍存在的机械能转换为电能,可以实现自供能传感、控制与驱动,具备灵活、节能环保、可持续的优势,具有广阔的应用前景。为了促进压电振动能量采集器件的集成与融合,提出面内压电振动能量采集,将压电振动能量采集器进行扁平化设计,使其在二维平面内采集振动能量,在保证较大功率输出下能够显著减小器件所需三维空间。为了提高输出功率与工作频宽,设计了具有双稳态与力放大机制的面内压电振动能量采集器。考虑弯张小变形,通过能量法建立了面内压电振动能量采集器的机电耦合动力学模型。分析了关键设计参数对面内压电振动能量采集器性能的影响。数值仿真了面内压电振动能量采集器在简谐激励下的俘能性能,结果表明,通过合理的设计,面内压电振动能量采集器可以低频、宽频弱激励下有效俘获能量。面内压电振动能量采集设计方法有利于推动便携式、可穿戴式自供能等方面的应用和产业化。