Prediction of Klason lignin and lignin thermal degradation products by Py–GC/MS in a collection of Lolium and Festuca grasses

A rapid method for the analysis of biomass feedstocks was established to identify the quality of the pyrolysis products likely to impact on bio-oil production. A total of 15 Lolium and Festuca grasses known to exhibit a range of Klason lignin contents were analysed by pyroprobe–GC/MS (Py–GC/MS) to determine the composition of the thermal degradation products of lignin. The identification of key marker compounds which are the derivatives of the three major lignin subunits (G, H, and S) allowed pyroprobe-GC/MS to be statistically correlated to the Klason lignin content of the biomass using the partial least-square method to produce a calibration model. Data from this multivariate modelling procedure was then applied to identify likely “key marker” ions representative of the lignin subunits from the mass spectral data. The combined total abundance of the identified key markers for the lignin subunits exhibited a linear relationship with the Klason lignin content. In addition the effect of alkali metal concentration on optimum pyrolysis characteristics was also examined. Washing of the grass samples removed approximately 70% of the metals and changed the characteristics of the thermal degradation process and products. Overall the data indicate that both the organic and inorganic specification of the biofuel impacts on the pyrolysis process and that pyroprobe–GC/MS is a suitable analytical technique to asses lignin composition.     

Thermal degradation of lignin–phenol–formaldehyde and phenol–formaldehyde resol resins

Resol resins are used in many industrial applications as adhesives and coatings, but few studies have examined their thermal degradation. In this work, the thermal stability and thermal degradation kinetics of phenol–formaldehyde (PF) and lignin–phenol–formaldehyde (LPF) resol resins were studied using thermogravimetric analysis (TG) in air and nitrogen atmospheres in order to understand the steps of degradation and to improve their stabilities in industrial applications. The thermal stability of samples was estimated by measuring the degradation temperature (T _d), which was calculated according to the maximum reaction rate criterion. In addition, the ash content was determined at 800 °C in order to compare the thermal stability of the resol resin samples. The results indicate that 30 wt% ammonium lignin sulfonate (lignin derivative) as filler in the formulation of LPF resin improves the thermal stability in comparison with PF commercial resin. The activation energies of degradation of two resol resins show a difference in dependence on mass loss, which allows these resins to be distinguished. In addition, the structural changes of both resins during thermal degradation were studied by Fourier transform infrared spectroscopy (FTIR), with the results indicating that PF resin collapses at 300 °C whereas the LPF resin collapses at 500 °C.     

Effect of lignin content on thermal degradation of wood pulp

A series of pulps containing between 3.6 and 23% of lignin was prepared by a careful delignification of a high-yield bisulfite pulp. The pulps were subjected to isothermal pyrolysis in a Perkin-Elmer TGS-1 thermobalance. The measurements were carried out at 8 different temperatures from 325 to 360°C under nitrogen atmosphere. The results obtained indicate that the effect of lignin on degradation depends strongly on temperature. Below 330°C, the rate of degradation varied only little with lignin. This variation becomes more important at temperatures above 330°C in that the rate of degradation increases with decreasing lignin content. The apparent activation energy of degradation ranges from 41.4 kcal mol^?1 at 23% of lignin to 67.0 kcal mol^?1 at 3.7% of lignin.     

Pyrolytic behaviour of different biomasses (angiosperms) (maize plants,straws, and wood) in low temperature pyrolysis

The thermal degradation of agricultural products and by-products (two kinds of maize plants, wheat, and barley straw) has been investigated by means of thermogravimetric/mass spectrometric analysis at heating rates from 1 to 10 °C/min. Large differences were found in the pyrolytic behaviour of the untreated samples, mainly caused by the high content of inorganics (ash content of about 4–6 wt%). These differences could be reduced by washing the samples with cold water. A kinetic model based on the formal kinetic parameters for the pyrolysis of the main components (hemicelluloses, lignin, and cellulose) and their degradable amounts was applied. To reduce the complexity of the model, only largely ash reduced samples were used. The formal kinetic parameters for the main components of barley straw and Gavott were individually determined. Although, different monomeric lignin degradation products were found for the angiosperms of grassy biomass in comparison to woody biomass, the formal kinetic parameters for lignin degradation are similar. The transferability of the formal kinetic parameters was successfully tested by applying them to a different straw type (wheat) and to a different maize cultivar (Doge) using the results of the biochemical analysis for the main components (hemicelluloses, lignin, and cellulose).     

Structural and physico-chemical characterization of lignins solubilized during alkaline peroxide treatment of barley straw

In this paper, the seven acid-insoluble lignin preparations from barley straw were first extracted with alkaline hydrogen peroxide in order to study how the delignification and degradation of the lignin is influenced by aqueous 1.5% H₂O₂ extractant to straw ratios. The results showed that treatment of dewaxed barley straw with 1.5% H₂O₂ at 45°C for 14 h (pH 12.0) under the extractant to straw ratios of 10:1, 13:1, 15:1, 18:1, 20:1, 25:1, and 30:1 resulted in dissolution of 65.8%, 68.4%, 68.4%, 69.0%, 69.7%, 71.6%, and 72.3% of the original lignin and 78.7%, 79.8%, 82.3%, 83.4%, 84.8%, 85.3%, and 85.3% of the original hemicelluloses, respectively. The degraded seven lignin samples were analyzed with respect to their chemical compositions, content of chemically linked polysaccharides, molecular weights and structural changes. It was found that the alkaline peroxide treatment under the conditions given led to a noticeable increase in a amount of carboxyl groups due to the oxidation. The results from 13C-NMR analyses showed that the treatment was extremely effective for isolation of highly pure lignins from the straw, and the treatment under the conditions used did not affect the overall structure of lignin. The β-O-4 ether bond and β-β carbon-carbon linkage were found to be the major linkages between lignin units. Hydroxycinnamic acids, such as p-coumaric and ferulic acids, appeared to be strongly linked to lignin molecules, in which p-coumaric acid was found to be bonded to lignin by ester linkage, while ferulic acid was linked by its phenolic group via ether bond to lignin and also principally linked by its carboxyl group via ester bond to lignin and/or hemicelluloses.     

Thermal degradation behaviour of isotactic polypropylene blended with lignin

The influence of lignin on the thermal degradation of isotactic polypropylene, investigated by thermogravimetric analysis, is reported in this article. Polypropylene blends containing 5 and 15 wt% of lignin were prepared by mixing the components in a screw mixer. An increase in the thermal degradation temperature of the blends was observed as a function of lignin content, in both oxidative and non-oxidative conditions. The increase is noticeably marked for the experiments carried out in air atmosphere, where the interactions between the polypropylene and the lignin lead to the formation of a protective surface able to reduce the oxygen diffusion towards the polymer bulk. Morphological analyses were carried out with optical and electronic microscopy, to evaluate the degree of dispersion of the lignin in the polypropylene matrix. X-ray techniques were employed to study the influence of lignin on the structure of the blended polypropylene.     

Mathematical Tool from Corn Stover TGA to Determine Its Composition

Corn stover was treated by steam explosion process at four different temperatures. A fraction of the four exploded matters was extracted by water. The eight samples (four from steam explosion and four from water extraction of exploded matters) were analysed by wet chemical way to quantify the amount of cellulose, hemicellulose and lignin. Thermogravimetric analysis in air atmosphere was executed on the eight samples. A mathematical tool was developed, using TGA data, to determine the composition of corn stover in terms of cellulose, hemicellulose and lignin. It uses the biomass degradation temperature as multiple linear function of the cellulose, hemicellulose and lignin content of the biomass with interactive terms. The mathematical tool predicted cellulose, hemicellulose and lignin contents with average absolute errors of 1.69, 5.59 and 0.74?%, respectively, compared to the wet chemical method.     

Thermal degradation of wood treated with flame retardants

Wood, one of the most flammable materials, was treated with various compounds containing nitrogen, phosphorus, halogens, and boron. For a study of flame retardance from the standpoint of thermal degradation, the samples were subjected to thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG) in nitrogen to determine if there were any characteristic correlations between thermal degradation behaviors and the level of flame retardance. From the resulting data, kinetic parameters for different stages of thermal degradation are obtained using the method of Broido. The energies of activation for the decomposition of samples are found to be from 72 to 109 kJ mol^–1. For wood and modified wood, the char yields are found to increase from 10.2 to 30.2%, LOI from 18 to 36.5, which indicates that the flame retardance of wood treated with compounds is improved. The flame retardant mechanism of different compounds has also been proposed.     

秸秆纤维素的一步快速提取和水解

研究了秸秆纤维素的一步快速提取方法, 在醋酸和硝酸溶液体系中, 选择10种不同的反应条件, 进行了提取条件优选, 然后对提取的纤维素样品分别进行了水解. 结果发现, 纤维素提取的最佳条件为120 ℃, 固液比为1∶25, 在体积分数为80%的醋酸和10%的硝酸混合溶液中反应20 min, 纤维素的产率为38%. 纤维素样品的水解实验发现, 在最佳条件下提取样品的葡萄糖含量都大于90%, 水解率达到94%. 13C NMR和FTIR分析结果表明, 纤维素的分子结构未被破坏, 但纤维素Ⅰβ含量较高, 木质素和半纤维素的去除率都很高, 表明此方法是比较理想的制备高纯度纤维素的方法.     

The Structural,Molecular and Functional Properties of Lignin-Containing Beechwood Glucuronoxylan

The samples of 4-O-methyl-D-glucurono-D-xylan (GX) with different lignin and uronic acid (MeUA) contents were prepared from beechwood by various procedures. The re-dissolution process of the partially water-soluble GX-2 lyophilizate in aqueous medium depended on the content and distribution of MeUA. In contrast to the supernatant after ultracentrifugation, the sediment had a significantly lower MeUA content and showed mainly high-molecular mass components. A part of lignin degradation products is separable by repeated dissolution and precipitation of GX in acidic and alkaline 80% ethanolic media with assistance of ultrasound. Irradiation in acidic ethanol (GX-3/ac) showed no effect on the distribution of the UV₂₅₄-absorbing component. GX-3 sonicated in neutral and alkaline media (GX-3/ne, GX-3/alk) lost water solubility. The lignin-rich GX samples showed remarkable emulsifying efficiency and protein foam stabilization effect. In addition, the presence of phenolics provided antioxidant properties to these xylan preparations indicating their potential as polymeric radical scavengers.     

贵金属催化剂上两步法选择性降解有机溶剂型木质素

使用担载型贵金属催化剂和磷酸在不同温度下通过两步法加氢降解二氧六环木质素. 第一步反应使用Rh/C和浓度为1% (w)的磷酸为催化剂, 在270 ℃和4 MPa氢气气氛下反应后通过气相色谱(GC)和气相色谱-质谱(GC-MS)分析木质素单体和二聚体, 总收率最高可达16.9%. 通过傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、元素分析(EA)和凝胶渗透色谱(GPC)等方法研究第一步反应产物的变化. 结果发现, 二氧六环木质素中的C－O－C键被打断, 木质素分子量降低, 部分羰基和羧基被脱除. 随着反应温度的上升, 产物的含氧量不断下降, 在270 ℃反应10 h 后氧含量从35% (w)降低至21% (w). 结合不同的表征方法, 提出二氧六环木质素的第一步反应路径. 第二步反应中使用Pd/C和磷酸为催化剂在250 ℃可以将木质素单体、二聚体高选择性地加氢脱氧转化为对应的烃类产物.     

Structural features and thermal degradation properties of various lignin macromolecules obtained from poplar wood (Populus albaglandulosa)

Four different lignins obtained from poplar wood (milled wood lignin: ML, organosolv lignin: OL, ionic liquid lignin: IL and Klason lignin: KL) were subjected to several types of chemical/thermal analyses to compare their structural features and thermal decomposition properties. The ML, OL, IL and KL yield from poplar wood was 5.5, 3.9, 5.8, 19.5 wt%, respectively. Functional group analysis revealed that during the OL and KL extraction processes, the condensation reaction involved with phenolic hydroxyl groups of lignins significantly prevailed, which led to a highly condensed OL and KL structure. Thermogravimetric analysis (TGA) results showed that OL and KL thermal stability was much higher than that of ML and IL. The derivatization followed by reductive cleavage (DFRC) data showed that the thermal stability was highly associated with the frequency of arylglycerol-β-aryl ether (β-O-4) linkages in the lignin polymers. Pyrolysis-GC/MS (Py-GC/MS) analysis confirmed that acetic acid and several types of phenolic compounds were the main lignin pyrolysis products. The maximum sum of ML (13.8 wt%), OL (9.9 wt%) and IL (11.8 wt%) pyrolysis products was obtained at the pyrolysis temperature of 600 °C, whereas KL (1.6 wt%) was significantly lower due to its high thermal stability and condensation degree. The S- and G-type pyrolysis products (S/G) ratio varied from 1.61 to 1.93 for ML, 2.28 to 5.28 for OL, 2.06 to 2.86 for IL and 1.40 to 2.20 for KL, depending on the pyrolysis temperature, which ranged between 400 °C and 700 °C.     

Snapshots of lignin oxidation and depolymerization in archaeological wood: an EGA‐MS study

Evolved gas analysis‐mass spectrometry (EGA‐MS) was used for the first time to study archaeological wood, in order to investigate its chemical degradation. The archaeological wood was from an oak pile from a stilt house found in the Neolithic ‘La Marmotta’ village (Lake Bracciano, Rome, Italy). The sampling was performed from the external to the internal part of the pile, following the annual growth rings in groups of five. In addition, sound oak wood and isolated wood components (holocellulose and cellulose) were also analyzed, and the results were used to highlight differences because of degradation. Our study demonstrated that EGA‐MS provides information on the thermo‐chemistry of archaeological wood along with in‐depth compositional data thanks to the use of MS. Our investigations not only highlighted wood degradation in terms of differences between carbohydrates and lignin content, but also showed that lignin oxidation and depolymerization took place in the archaeological wood. Mass spectral data revealed differences among the archaeological samples from the internal to the external part of the pile. An increase in the formation of wood pyrolysis products bearing a carbonyl group at the benzylic position and a decrease in the amount of lignin dimers were observed. These were related to oxidation and depolymerization reactions, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Degradation of polyesteramides prepared by the anionic polymerisation of -caprolactam in the presence of poly(-caprolactone)

Poly[(-caprolactam)-co-(-caprolactone)] was prepared by the anionic polymerisation of -caprolactam in the presence of poly(-caprolactone) initiated by -caprolactam magnesium bromide. Copolymers with 10–25% -caprolactone structure units were subjected to degradation. After 8-weeks abiotic hydrolysis at 60 °C the molar mass of the copolymer was significantly reduced as seen from viscosity measurements. IR spectroscopy was employed to clarify the mechanism of hydrolysis. Only small changes in molar mass were observed after composting and fungal treatment. Therefore, the effect of degradation temperature was crucial. The thermal properties of polyesteramides were studied by DSC, which showed the shift of melting endotherm and enthalpy of fusion to higher values of degraded samples compared to original one. This indicated an increase in crystalline phase content caused by reorganization of amorphous phase. Physical degradation of films was observed using SEM. Film-surface changes were apparent mainly on samples with 25% -caprolactone units.     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Eco-friendly composite resins based on renewable biomass resources: Polyfurfuryl alcohol/lignin thermosets

The properties of an innovative polyfurfuryl alcohol (PFA)/lignin combined matrix have been investigated. Furfuryl alcohol (FA) and lignin are, respectively, monomeric and polymeric precursors issued from biomass feedstock. In the present work, a plasticized lignin (PL) has been blended during polymerization of FA into PFA. Two kinds of samples were prepared at different FA/lignin ratio. Structural investigations were made on resins by ¹³C NMR while the thermo-mechanical performances of the combined materials were studied using thermogravimetric (TGA) and dynamic mechanical analysis (DMA). TGA results have permitted us to determine the thermal stability and the composition of the cured material on the basis of the ash content. According with these results, it was found that the lignin ratio in the cured material is more important than in the initial threshold. The TGA reveals that the PFA/PL thermo-oxidative degradation occurs at higher temperature compared to the natural (PL) component system, together with a lower rate of decomposition. This underlines a good interpenetration of lignin within the furanic matrix. The morphologies of the combined PFA/lignin systems, controlled by scanning electron microscopy (SEM), reveal a monophasic structure. These observations are in good agreement with the presence of a unique relaxation peak as shown in the DMA results.     

Reactions of lignin in chlorine dioxide bleaching of kraft pulps

The reactions between chlorine dioxide and the residual lignin in oxygen-bleached softwood kraft pulps have been studied. In a first series, isolated lignin samples have been subjected to chlorine dioxide oxidation at different pH values and subsequently analysed by oxidative degradation and elemental analysis. Different analytical techniques have also been employed to follow the gradual chemical changes in lignins isolated from kraft pulps after each of the bleaching stages in the OD(EOP)DD sequence. The results demonstrate that, in order to minimize chlorination of the lignin, the first chlorine dioxide stage should be carried out at a pH around or above three. At this pH level, a high degree of lignin oxidation is also achieved. A certain (mono)-chlorination of the lignin in the first D stage cannot be avoided, but this chlorine is to a large extent removed in the later bleaching stages. The efficient and non-selective oxidation of the various phenolic lignin end groups by chlorine dioxide is clearly illustrated by the analytical data. Moreover,¹³C NMR reveals that reduced lignin structures formed during the kraft cook survive the oxidative bleaching stages to a large extent.     

Thermal degradation of lyocell,modal and viscose fibers under aggressive conditions

Lyocell, modal and viscose fibers were subjected to mercerization or to solar degradation. The ulterior thermal degradation was analyzed by means of differential scanning calorimetry (DSC). Thermal analysis shows wide exothermic processes that began between 250 and 300°C corresponding to the main thermal degradation and are associated to a depolymerization and decomposition of the regenerated cellulose. Thermal degradation was analyzed as a function of concentration and time. Lyocell fiber is the most stable under thermal degradation conditions. Furthermore, mercerized samples are initially more degraded and present a lower thermal stability.     

Pyrolysis-GC/MS and TG/MS study of mediated laccase biodelignification of Eucalyptus globulus kraft pulp

Biobleaching studies using laccase mediator system (LMS) were carried out, under optimized conditions, on two unbleached Eucalyptus globulus kraft pulps, one produced by conventional way, with kappa number of 16.1, and another with kappa number of 14.5, obtained by modified kraft procedure with a high liquor/wood ratio and with black liquor replacement in the middle of the cooking. The pulp properties before and after LMS and alkaline extraction were evaluated in terms of kappa number, hexeneuronic acid content, viscosity, brightness and acid insoluble lignin content.The original milled wood sample and the kraft pulps were characterized by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and thermogravimetry/mass spectrometry (TG/MS). Eucalypt wood lignin produces guaiacol and syringol derivatives during pyrolysis. These lignin products can be detected with high sensitivity using the selected ion chromatograms even in the bleached pulp of low lignin content (about 0.5%). Py-GC/MS revealed that the lignin moieties were similarly altered during biobleaching as during pulping, which is exemplified by the preferential removal of aldehyde groups from the alkyl side groups. Semi-quantitative analysis of the pyrograms indicates that the lignin content of the biobleached pulps is reduced by about half in comparison with the unbleached pulps. The TG/MS results show that the hemicellulose content of wood was strongly modified during pulping resulting in higher thermal stability.     

Prediction of the lifetime of nitrile-butadiene rubber by FT-IR.

A quantitative measurement method with FT-IR was proposed for a thermal degradation analysis of nitrile-butadiene rubber (NBR). An NBR film was prepared as a model sample on a barium fluoride (BaF2) crystal plate, which was subjected to a heat treatment. The absorbances of various functional groups were measured directly by FT-IR after thermal degradation at high temperatures. By measuring the absorbances, it was possible to readily determine quantitatively each of the functional groups after the degradation of NBR. By assuming that the NBR lifetime was the point at which the absorbance of a carbon-carbon double bond reaches 45% of that prior to thermal treatment, a method for predicting the lifetime of NBR heated below 150 degrees C was proposed, by using an Arrhenius plot of the heating time versus heating temperature.