High-temperature stable, iron-based core-shell catalysts for ammonia decomposition

High‐temperature, stable core–shell catalysts for ammonia decomposition have been synthesized. The highly active catalysts, which were found to be also excellent model systems for fundamental studies, are based on α‐Fe₂O₃ nanoparticles coated by porous silica shells. In a bottom‐up approach, hematite nanoparticles were firstly obtained from the hydrothermal reaction of ferric chlorides, L ‐lysine, and water with adjustable average sizes of 35, 47, and 75 nm. Secondly, particles of each size could be coated by a porous silica shell by means of the base‐catalyzed hydrolysis of tetraethylorthosilicate (TEOS) with cetyltetramethylammonium bromide (CTABr) as porogen. After calcination, TEM, high‐resolution scanning electron microscopy (HR‐SEM), energy‐dispersive X‐ray (EDX), XRD, and nitrogen sorption studies confirmed the successful encapsulation of hematite nanoparticles inside porous silica shells with a thickness of 20 nm, thereby leading to composites with surface areas of approximately 380 m² g^?1 and iron contents between 10.5 and 12.2 wt %. The obtained catalysts were tested in ammonia decomposition. The influence of temperature, iron oxide core size, possible diffusion limitations, and dilution effects of the reagent gas stream with noble gases were studied. The catalysts are highly stable at 750 °C with a space velocity of 120 000 cm³ g_cat^?1 h^?1 and maintained conversions of around 80 % for the testing period time of 33 h. On the basis of the excellent stability under reaction conditions up to 800 °C, the system was investigated by in situ XRD, in which body‐centered iron was determined, in addition to FeN_x, as the crystalline phase under reaction conditions above 650 °C.     

Chemical locomotion

Research into the autonomous motion of artificial nano- and microscale objects provides basic principles to explore possible applications, such as self-assembly of superstructures, roving sensors, and drug delivery. Although the systems described have unique propulsion mechanisms, motility in each case is made possible by the conversion of locally available chemical energy into mechanical energy. The use of catalysts onboard can afford nondissipative systems that are capable of directed motion. Key to the design of nano- and micromotors is the asymmetric placement of the catalyst: its placement in an environment containing a suitable substrate translates into non-uniform consumption of the substrate and distribution of reaction products, which results in the motility of the object. These same principles are exploited in nature to effect autonomous motion.     

Intrinsic catalytic structure of gold nanoparticles supported on TiO2

Despite the fragility of TiO(2) under electron irradiation, the intrinsic structure of Au/TiO(2) catalysts can be observed by environmental transmission electron microscopy. Under reaction conditions (CO/air 100?Pa), the major {111} and {100} facets of the gold nanoparticles are exposed and the particles display a polygonal interface with the TiO(2) support bounded by sharp edges parallel to the 〈110〉 directions.     

High-throughput heterogeneous catalytic science

High-throughput experimentation in heterogeneous catalysis has recently experienced nearly exponential growth. Initial qualitative screening has evolved into quantitative high-throughput experimentation, characterization, and analysis. This allows high-throughput catalysis now to rise above simple screening to the level of fundamental understanding of reaction mechanisms, which will lead on a faster path to the Holy Grail of catalysis: rational catalyst design.     

Polymer Nanoparticles Based on Pyrene‐Functionalized Poly(acrylic acid) for Controlled Release under Photo and pH Stimulation

A novel photo and pH‐responsive amphiphilic pyrene‐functionalized polymer is synthesized by the esterification reaction between poly(acryloyl chloride) and pyrenemethanol and subsequent hydrolysis of the unreacted acylchloride groups. This random copolymer consists of hydrophobic pyrene‐containing acrylate units and hydrophilic acrylic acid units, which can self‐assemble into nanoparticles in water. Under UV irradiation, the nanoparticles can be disrupted with decreasing particle number resulted from the photolysis of pyrenylmethyl esters, where the hydrophobic segments are converted to hydrophilic acrylic acids; at low pH, the acrylic acid segments are protonated and collapsed, thus the nanoparticles will be shrunk and aggregated; at high pH, the nanoparticles change to fractal structures owing to the aggregation of partially dissociated nanoparticles and the subsequent structural reorganization of the clusters. The controlled release of Nile Red from the nanoparticles stimulated by photo and pH separately and synergistically is demonstrated. The nanoparticles self‐assembled from the dual‐stimuli‐sensitive polymer can be used as a new nanocarrier and find their applications in delivery system.

     

Formation of efficient catalytic silver nanoparticles on carbon nanotubes by adenine functionalization

Stuck together: Adenine/carbon nanotube hybrids trigger the formation of controlled-size catalytic silver nanoparticles on the nanotube surface. The catalytic efficiency of the resulting species was assessed in the oxidation of 2-methylhydroquinone to its corresponding benzoquinone, with complete recovery and without loss of activity of the catalyst.     

Polymer Nanoparticles for Controlled Release Stimulated by Visible Light and pH

Polymer nanoparticles are prepared by self‐assembly of visible light and pH sensitive perylene‐functionalized copolymers which are synthesized by quaternization between 1‐(bromomethyl)perylene and the dimethylaminoethyl units of poly(dimethylaminoethyl methacrylate) (PDMAEMA). The perylene‐containing polymethacrylate segments afford the system visible light responsiveness and the unquaternized PDMAEMA segments afford the system pH responsiveness. The self‐assembled nanoparticles exhibit a unique dual stimuli response. They can be photocleaved under visible light irradiation, shrunken to smaller nanoparticles at high pH, and swollen at low pH. The structural change endows the nanoparticle with great potential as a sensitive nanocarrier for controlled release of Nile Red and lysozyme under this stimulation. The visible light responsiveness and synergistic effect on the release of loaded molecules with the dual stimulation may obviate the need for harsh conditions such as UV light or extreme pH stimulation, rendering the system more applicable under mild conditions.

     

Energy-efficient syngas production through catalytic oxy-methane reforming reactions

The considerable recent interest in the conversion of stranded methane into transportable liquids as well as fuel cell technology has provided a renewed impetus to the development of efficient processes for the generation of syngas. The production of syngas (CO/H2), a very versatile intermediate, can be the most expensive step in the conversion of methane to value-added liquid fuels. The catalytic oxy reforming of methane, which is an energy-efficient process that can produce syngas at extremely high space-time yields, is discussed in this Review. As long-term catalyst performance is crucial for the wide-scale commercialization of this process, catalyst-related studies are abundant. Correspondingly, herein, emphasis is placed on discussing the different issues related to the development of catalysts for oxy reforming. Important aspects of related processes such as catalytic oxy-steam, oxy-CO2, and oxy-steam-CO2 processes will also be discussed.     

Preparation and catalytic properties of NR-stabilized palladium colloids

Palladium colloids revealing narrow particle size distributions can be obtained by chemical reduction using tetra–alkylammonium hydrotriorganoborates. Combining the stabilizing agent [NR] with the reducing agent [BEt₃H^?] provides a high concentration of the protecting group at the reduction centre. Alternatively, NR₄X (X = halogen) may be coupled to the metal salt prior to the reduction step: addition of N(octyl)₄Br to Pd(ac)₂ in THF, for example, evokes an active interaction between the stabilizing agent and the metal salt. Reduction of NR-stabilized palladium salts with simple reducing agents such as hydrogen at room temperature yields stable palladium organosols which may be isolated in the form of redispersible powders. The anion of the palladium salt is crucial for the success of the colloid synthesis. Electron microscopy shows that the mean particle size ranges between 1.8 and 4.0 nm. An X–ray–photoelectron spectrscopic examination demonstrated the presence of zerovalent palladium. These palladium colloids may serve as both homogeneous and heterogeneous hydrogenation catalysts. Adsorption of the colloids onto industrially important supports can be achieved without agglomeration of palladium particles. The standard activity of a charcoal catalyst containing 5% of colloidal palladium determined through the cinnamic acid standard test was found to exceed considerably the activity of the conventional technical catalysts. In addition, the lifespan of the catalyst containing a palladium colloid, isolated from the reduction of [N(octyl)₄]₂PdCl₂Br₂ with hydrogen, is superior to conventionally prepared palladium/charcoal (Pd/C) catalysts. For example, the activity of a conventional Pd/C catalyst is completely suppressed after 38×10³ catalytic cycles per Pd atom, whereas the colloidal Pd/C catalyst shows activity even after 96times;10³ catalytic cycles.