Highly responsive biosensors based on organic field-effect transistors under light irradiation

High responsivity and sensitivity play essential roles in the development of organic field-effect transistors (OFETs)-based biosensors with regard to biological detections, particularly for disease diagnosis. Nonetheless, how to design a biosensor which improves these two outstanding properties while achieving low cost, easy processing, and time saving is a daunting challenge. Herein, a novel biosensor based on OFET with copolymer thin film, whose surface is illuminated with a suitable light beam is reported. This film can be used as both an organic semiconductor material and as a photoelectric active material. Due to amplification of signals as a result of the film’s strong response to light, the biosensor possesses higher responsivity and sensitivity compared to dark condition and even realizes a maximum responsivity of up to 10³ for alpha-fetoprotein (AFP) detection. The simple combination of light and transistor builds a bridge between photoelectric effect and biological system. In addition, the emergence of more excellent photoelectric active materials is expected to pave a way for ultrasensitive bio-chemical diagnostic tools.     

有机场效应晶体管应用于化学及生物传感的研究进展

有机场效应晶体管(OFETs)是以有机半导体材料作为有源层的晶体管器件。和传统的无机半导体器件相比,由于其具有成本低、易加工、柔性好和生物相容性而被人们广泛研究,在多种化学和生物传感器领域具有潜在而广泛的应用前景。本文简单介绍了OFETs的结构和工作原理,总结了近几年来OFETs在化学及生物传感方面的研究进展,最后对OFETs的发展方向做了归纳和展望。     

Photoresponsive n-channel organic field-effect transistors based on a tri-component active layer

Photoresponsive OFETs were fabricated based on a tri-component active layer (NDI2OD-DTYM2, spiropyran and polystyrene). The results demonstrated that these OFETs displayed photoresponsive feature to alternate UV and vis light due to the photoisomerization of spiropyran between the closed-ring state and ionic open-ring state.     

高迁移率有机薄膜晶体管材料进展

对近几年来高迁移率有机薄膜晶体管材料研究的主要发展作了简要介绍和评述,讨论了高迁移率有机半导体材料存在的问题和发展方向．     

Photoresponsive organic field-effect transistors involving photochromic molecules

In recent years, organic field-effect transistors (OFETs) with high performance and novel multifunctionalities have attracted considerable attention. Meanwhile, featured with reversible photoisomerization and the corresponding variation in color, chemical/physical properties, photochromic molecules have been applied in sensors, photo-switches and memories. Incorporation of photochromic molecules to blend in the device functional layers or to modify the interfaces of OFETs is common way to build photo-transistors. In this review, we focus on the recent advantages on the study of photoresponsive transistors involving one of three typical photochromic compounds spiropyran, diarylethene and azobenzene. Three main strategies are demonstrated in detail. Firstly, photochromic molecules are doped in active layers or combined with semiconductor structure thus forming photoreversible active layers. Secondly, the modification of dielectric layer/active layer interface is mainly carried out by bilayer dielectric. Thirdly, the photo-isomerization of self-assembled monolayer (SAM) on the electrode/active layer interface can reversibly modulate the work functions and charge injection barrier, result in bifunctional OFETs. All in all, the combination of photochromic molecules and OFETs is an efficient way for the fabrication of organic photoelectric devices. Photoresponsive transistors consisted of photochromic molecules are potential candidate for real applications in the future.     

High yield fabrication of semiconducting thin-film field-effect transistors based on chemically functionalized single-walled carbon nanotubes

Here we report a simple and scalable method to fabricate high performance thin-film field-effect transistors(FETs) with high yield based on chemically functionalized single-walled carbon nanotubes(SWNTs) by organic radical initiators.The UV-Vis-NIR spectra,Raman spectra and electrical characterization demonstrated that metallic species in CoMoCat 65 and HiPco SWNTs could be effectively eliminated after reaction with some organic radical initiators.The effects of the substrate properties on the electrical pr...     

Acceptor-donor-acceptor conjugated oligomers based on diketopyrrolopyrrole and thienoacenes with four,five and six rings for organic thin-film transistors

Three acceptor-donor-acceptor(A-D-A) conjugated oligomers, i.e., O1, O2 and O3, have been synthesized using diketopyrrolopyrrole(DPP) as an electron-acceptor unit, and naphtho[1,2-b:5,6-b']dithiophene(NDT), anthra[1,2-b:5,6-b']dithiophene(ADT) or dithieno[3,2-b:3',2'-b']naphtho[1,2-b:5,6-b']dithiophene(DTNDT) as electron-donor unit. These oligomers exhibit identical highest occupied molecular orbital(HOMO) and lowest unoccupied molecular orbital(LUMO) energy levels, which were ca.-5.1 and-3.3 eV, respectively. Upon thermal annealing, all three oligomers formed thin films with ordered microstructures, and their organic thin film transistors(OTFTs) exhibited p-type transport behavior. The mobility was increased with an extension of the size of D-units. O3 showed the best OTFT performance with the mobility of up to 0.20 cm~2·V~(-1)·s~(-1). The film quality of O3 was improved by adding 1 wt% poly(methylmethacrylate)(PMMA). In consequence, the mobility of the O3-based devices was further enhanced to 0.30 cm~2·V~(-1)·s~(-1).     

Progresses in organic field-effect transistors and molecular electronics

In the past years, organic semiconductors have been extensively investigated as electronic materials for organic field-effect transistors (OFETs). In this review, we briefly summarize the current status of organic field-effect transistors including materials design, device physics, molecular electronics and the applications of carbon nanotubes in molecular electronics. Future prospects and investigations required to improve the OFET performance are also involved. __________ Translated from Huaxue Tongbao (Chemistry), 2006, 69(6) (in Chinese)     

Thiophene polymer semiconductors for organic thin-film transistors

Printed organic thin-film transistors (OTFTs) have received great interests as potentially low-cost alternative to silicon technology for application in large-area, flexible, and ultra-low-cost electronics. One of the critical materials for TFTs is semiconductor, which has a dominant impact on the transistor properties. We review here the structural studies and design of thiophene-based polymer semiconductors with respect to solution processability, ambient stability, molecular self-organization, and field-effect transistor properties for OTFT applications. We show that through judicial monomer design, delicately controlled pi-conjugation, and strategically positioned pendant side-chain distribution, novel solution-processable thiophene polymer semiconductors with excellent self-organization ability to form extended lamellar pi-stacking orders can be developed. OTFTs using semiconductors of this nature processed in ambient conditions have provided excellent field-effect transistor properties.     

Optical sensors and biosensors based on sol-gel films

The sol-gel technology is being increasingly used for the development of optical sensors and biosensors, due to its simplicity and versatility. By this process, porous thin films incorporating different chemical and biochemical sensing agents are easily obtained at room temperature, allowing final structures with mechanical and thermal stability as well as good optical characteristics. In this article, an overview of the state-of-the-art of sol-gel thin films-based optical sensors is presented. Applications reviewed include sensors for determination of pH, gases, ionic species and solvents, as well as biosensors.     

Alignment and patterning of organic single crystals for field-effect transistors

Organic field-effect transistors are of great importance to electronic devices. With the emergence of various preparation techniques for organic semiconductor materials, the device performance has been improved remarkably. Among all of the organic materials, single crystals are potentially promising for high performances due to high purity and well-ordered molecular arrangement. Based on organic single crystals, alignment and patterning techniques are essential for practical industrial application of electronic devices. In this review, recently developed methods for crystal alignment and patterning are described.     

A structurally ordered thiophene-thiazole copolymer for organic thin-film transistors

This paper reports a new donor-acceptor copolymer semiconductor, PTBTh, comprising bithiophene and bithiazole where the regular coplanar structure and the intramolecular charge transfer are expected to increase the opportunity for --- stacking and charge transport. The AFM image shows lamellar stacking of the polymer on the surface. The field-effect transistor (FET) properties of PTBTh have been evaluated by a bottom-contact/bottom-gate TFT configuration. The device showed a high hole mobility of 1.14×10-2 cm2 V-1 s-1 and a current on/off ratio of 3×105 with the polymer thin film annealed at a mild temperature of 120 ℃ when measured under ambient conditions.     

Current versus gate voltage hysteresis in organic field effect transistors

Abstract  Research into organic field effect transistors (OFETs) has made significant advances—both scientifically and technologically—during the last decade, and the first products will soon enter the market. Printed electronic circuits using organic resistors, diodes and transistors may become cheap alternatives to silicon-based systems, especially in large-area applications. A key parameter for device operation, besides long term stability, is the reproducibility of the current–voltage behavior, which may be affected by hysteresis phenomena. Hysteresis effects are often observed in organic transistors during sweeps of the gate voltage (V _GS). This hysteresis can originate in various ways, but comparative scientific investigations are rare and a comprehensive picture of “hysteresis phenomena” in OFETs is still missing. This review provides an overview of the physical effects that cause hysteresis and discusses the importance of such effects in OFETs in a comparative manner. Graphical abstract        

Synthesis and characterisation of liquid crystal molecules based on thieno [3,2-b] thiophene and their application in organic field-effect transistors

A thieno [3,2-b] thiophene-based planar liquid crystal molecule, C₁₂-PTTT, which possesses the characteristics of an organic field-effect transistor (OFET), was synthesised and its mesomorphic properties were studied by polarising optical microscopy and differential scanning calorimetry. A wide temperature range for a highly oriented smectic phase was observed. OFET devices made under various conditions, such as self-assembled monolayer treatment and alignment treatment, and with micro-channel structures, were fabricated to measure the electrical properties. Among different OFET device conditions, the best electric carrier mobility for C₁₂-PTTT was 0.038 cm²?V^?1?s^?1.     

The design and synthesis of fused thiophenes and their applications in organic field-effect transistors

Fused thiophenes refer to oligothienoacenes in which several thiophenes are coupled together via twoor multi-positions and their derivatives. The synthesized organic semiconductors based on fused thiophenes exhibit excellent field effect properties due to their efficient intermolecular S…S interactions and π…π stacking. The performances of organic field-effect transistors (OFETs) depend not only on the materials but also on the devices. Such factors which influence the device performances as device structur...     

Rational design of diarylethylene-based polymeric semiconductors for high-performance organic field-effect transistors

Constructing planar, rigid, and high electronically delocalized π-conjugated molecular system is the most basic requirements of obtaining high-performance polymeric semiconductors for organic field-effect transistors (OFETs). In this regard, diarylethylene (DAE)-based polymers show great potential because many substantive progresses related to polymer field-effect transistors had been achieved from the kind of polymer materials in recent years. In the brief review, series of DAE-based polymer are highlighted, based on which several design strategies have been summarized by the way of comparative research method. These strategies have important guiding significance not only for further developing new DAE-based and other polymeric semiconductors for OFETs but also for developing specific polymeric semiconductors for other organic electronics, such as organic photovoltaics and organic light-emitting diodes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 585–603     

并五苯及其衍生物在有机场效应晶体管中的应用

有机场效应晶体管（organic field—effect transistors,OFETs）是以有机半导体材料作为有源层,通过电场控制电流的电子器件．与传统的无机半导体器件相比,由于其可应用于生产大面积、柔性、低成本电子设备而备受关注,在有机存储器件、有机太阳能电池、柔性平板显示和电子纸等众多领域具有潜在而广泛的应用前景．并苯类材料因其紧密的分子堆积及优异的半导体性能被广泛研究．其中,并五苯及其衍生物在场效应晶体管中表现出良好的性质,其效果甚至可以与非晶硅相媲美,但并五苯较差的溶解性及环境稳定性阻碍了其进一步应用．科研工作者通过对分子结构进行修饰改造设计,合成了一系列并五苯的衍生物,其不仅在稳定性、电学性能和溶解性方面有很大提高,还可以将该p-型半导体材料拓展到双极性及n-型半导体材料领域．本文对并五苯及其衍生物在有机场效应晶体管中的应用进行了较为全面的综述,期望对该领域的研究起到一定的推动作用．     

Optimization of organic electrochemical transistors for sensor applications

Despite the recent interest in organic electrochemical transistors (OECTs) as chemical and biological sensors, little is known about the role that device architecture and materials parameters play in determining sensor performance. We use numerical modeling to establish design rules in two regimes of operation: We find that for operation as an ion‐to‐electron converter, the response of OECTs is maximized through the use of a gate electrode that is much larger than the channel or through the use of a nonpolarizable gate electrode. Improving the conductivity of the polymer and using a channel geometry that maximizes channel width and thickness, and minimizes channel length helps increase the response. For operation as an electrochemical sensor, the sensitivity is maximized in OECTs with gate electrodes that are smaller than their channels. The sensitivity can be improved by increasing the charge carrier mobility and the capacitance per unit area of the conducting polymer, and also its ability to be penetrated by ions from the electrolyte. A channel geometry that maximizes channel width and minimizes channel length also improves sensitivity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Proteins as functional interlayer in organic field-effect transistor

The paper summarizes and discusses the recent advances of proteins as functional interlayers in organic field-effect transistors (OFETs). Specific focus is given on the proteins integrated into the device structure, either to act as dielectric materials or to perform as the functional interlayer between the dielectric and the organic semiconductor (OSC). The main emphasis is give to the location and the specific effect of protein layers in the structure of OFETs. Besides, the possibility of amyloid serving as useful building blocks for OFET is discussed.     

Corannulene derivatives for organic electronics: From molecular engineering to applications

This paper intends to provide an overview for using corannulene derivatives in organic electronics such as organic field-effect transistors (OFETs), organic solar cells (OSCs), and organic light-emitting diodes (OLEDs). We highlight the rational design strategies, tuning molecular orbital energy levels and arrangement in single crystals of corannulenes. The topological structure and properties of corannulene make it a unique candidate for organic electronics.