CuNaY分子筛的有效吸附位与其脱硫性能的关联性研究

以液相离子交换法制备了一系列不同Cu负载量的CuNaY分子筛;采用XRD及N₂吸附-脱附表征分子筛的微观结构和织构性质,采用动态吸附法考察其对噻吩模拟油的吸附脱硫性能,结合NH₃-TPD和Py-FTIR方法对CuNaY分子筛的酸量和有效Cu⁺物种进行定量分析,研究了CuNaY分子筛的表面酸性和铜物种形态结构对其吸附脱硫性能的影响机制。结果表明,通过改变铜负载量可有效调控改性Y分子筛的表面酸性以及铜物种化学形态;适量铜物种的引入可以最大限度的形成有效吸附位,从而获得最优吸附脱硫性能,而过量的Cu物种会在Y分子筛笼内形成多核铜物种结构,导致有效吸附位点的减少,影响其对噻吩的吸附能力。     

The nature of the adsorption sites in Na-A zeolite

The formation of carbonate-like compounds in adsorption of CO₂ on Na-A zeolite does not determine the type of changes in the heats of adsorption for degrees of filling of >1 molecule per unit cell (UC). The results of studies of the electrical properties of Na-A zeolite confirm the concepts that Na⁺ located in the eight-member rings are not the primary adsorption sites with respect to CO₂.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1238–1243, June, 1990.     

Mapping enzyme active sites in complex proteomes

Genome sequencing projects have uncovered many novel enzymes and enzyme classes for which knowledge of active site structure and mechanism is limited. To facilitate mechanistic investigations of the numerous enzymes encoded by prokaryotic and eukaryotic genomes, new methods are needed to analyze enzyme function in samples of high biocomplexity. Here, we describe a general strategy for profiling enzyme active sites in whole proteomes that utilizes activity-based chemical probes coupled with a gel-free analysis platform. We apply this gel-free strategy to identify the sites of labeling on enzymes targeted by sulfonate ester probes. For each enzyme examined, probe labeling was found to occur on a conserved active site residue, including catalytic nucleophiles (e.g., C32 in glutathione S-transferase omega) and bases/acids (e.g., E269 in aldehyde dehydrogenase-1; D204 in enoyl CoA hydratase-1), as well as residues of unknown function (e.g., D127 in 3 beta-hydroxysteroid dehydrogenase/isomerase-1). These results reveal that sulfonate ester probes are remarkably versatile activity-based profiling reagents capable of labeling a diversity of catalytic residues in a range of mechanistically distinct enzymes. More generally, the gel-free strategy described herein, by consolidating into a single step the identification of both protein targets of activity-based probes and the specific residues labeled by these reagents, provides a novel platform in which the proteomic comparison of enzymes can be accomplished in unison with a mechanistic analysis of their active sites.     

Equilibrium adsorption of an oxygen-nitrogen mixture on zeolite NaX

Dependences of the Helmholtz energy, entropy, and internal energy in single micropores on the total number of guest molecules and the oxygen to nitrogen ratio were found by analysis of experimental data on adsorption of the binary oxygen-nitrogen mixture on zeolite NaX using the statistical model. A substantially non-ideal character of the adsorption phase, which exhibits negative deviations from Raout's law, can result from heterogeneity of the adsorption field inside single cavities. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1077–1082, June, 1999.     

Identification of active sites in gold-catalyzed hydrogenation of acrolein

The active sites of supported gold catalysts, favoring the adsorption of C=O groups of acrolein and subsequent reaction to allyl alcohol, have been identified as edges of gold nanoparticles. After our recent finding that this reaction preferentially occurs on single crystalline particles rather than multiply twinned ones, this paper reports on a new approach to distinguish different features of the gold particle morphology. Elucidation of the active site issue cannot be simply done by varying the size of gold particles, since the effects of faceting and multiply twinned particles may interfere. Therefore, modification of the gold particle surface by indium has been used to vary the active site characteristics of a suitable catalyst, and a selective decoration of gold particle faces has been observed, leaving edges free. This is in contradiction to theoretical predictions, suggesting a preferred occupation of the low-coordinated edges of the gold particles. On the bimetallic catalyst, the desired allyl alcohol is the main product (selectivity 63%; temperature 593 K, total pressure p(total) = 2 MPa). From the experimentally proven correlation between surface structure and catalytic behavior, the edges of single crystalline gold particles have been identified as active sites for the preferred C=O hydrogenation.     

Sputtering FeCu nanoalloys as active sites for alkane formation in CO2 hydrogenation

Catalytic conversion of CO₂ to high-value products is a crucial method to achieve targets of carbon dioxide emissions peak and carbon neutralization. However, realizing a controllable product distribution in a single CO₂ hydrogenation process is of great challenge. Herein, we prepared the CuFe nanoalloy catalyst that directly transforms CO₂ to alkanes using physical sputtering method in mild condition. The characteristic results show that the proximity between Cu...     

Propene adsorption sites in zeolite ITQ-12: a combined synchrotron X-ray and neutron diffraction study

The adsorption site of propene in the small-pore, pure silica zeolite [Si24O48]-ITW-ITQ-12 has been characterized via Rietveld refinement of the crystal structure of propene-loaded ITQ-12 on the basis of synchrotron X-ray and neutron diffraction data taken at 298 K. The structure can be described with a monoclinic unit cell having Cm symmetry and unit cell parameters a = 10.436 angstroms, b = 15.018 angstroms, c = 8.855 angstroms, beta = 105.74 degrees, and volume = 1335.9 angstroms3. Four-fold disordered adsorption sites that are nearly equivalent relative to the cage's 2/m pseudosymmetry are located near the center of each ellipsoidally shaped [4(4)5(4)6(4)8(4)] cage. At this site, the adsorbed propene molecule lies on a plane close and approximately parallel to the equatorial plane of the cage and is aligned with its methylene group pointing toward the pore's eight-ring window. The refined propene concentration, 1.8 per unit cell content, is close to one propene molecule per [4(4)5(4)6(4)8(4)] cage and the amount observed in adsorption experiments at 298 K and 1 atm propene partial pressure.     

用密度泛函理论研究NO在H-ZSM-5分子筛不同酸性位的吸附

利用密度泛函理论(DFT),基于7T簇模型,在B3LYP/6-31G(d,p)水平上研究了NO分子在H-ZSM-5分子筛孔道中α,β,γ酸性位的吸附.在计算过程中,首先对H-ZSM-5的α,β,γ酸性位进行优化计算,然后对NO分子η1-N和η1-O两种吸附模式的红外光谱和吸附能进行计算.计算结果表明,NO分子以η1-N模式吸附于H-ZSM-5分子筛酸性位上,不同酸性位对NO分子的吸附能力排序为:α酸性位>β酸性位>γ酸性位.此外,H-ZSM-5分子筛直型孔道更有利于NO分子的吸附和扩散,因而可更有效地促进NO分子催化分解反应的进行.     

Structures of active sites for alkane transformations over the Pt/HZSM-5 and Pt/NaZSM-5 catalysts

The structure and reactivity of Pt₆ particles in the sodium and hydrogen forms of the ZSM-5 zeolite were investigated by the DFT method. Upon adsorption on the sodium form, the interaction energy is 15 kcal mol⁻¹ and a negative charge appears on the metal cluster. In channels of the hydrogen form, the adsorption energy of the metal particle increases to 45 kcal mol⁻¹ and the oxidized states of platinum are formed. The formation of an active site in the H-form of the zeolite involves the interaction of the platinum particle with the acid site resulting in the suppression of the acidity of the support. An alternative mechanism of alkane transformations avoiding acid site participation was proposed. A possibility to envisage the direction of the transformation of alkanes adsorbed on the metal particles was shown. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1139–1144, June, 2008.     

Identification of two types of exchangeable sites for monovalent copper ions exchanged in MFI-type zeolite

Three different approaches have been used to characterize the state of exchanged copper ions in copper-ion-exchanged MFI (CuMFI) samples. (1) Two types of an ion-exchangeable site with different adsorption properties for N(2) or CO molecules were identified depending on the pre-treatment temperature (723 or 873 K) of a sample prepared by using an aqueous solution of CuCl(2). (2) The state of the active sites formed by the evacuation of a sample at 873 K that had been prepared using a mixture solution of aqueous NH(4)CH(3)COO and Cu(CH(3)COO)(2) was analysed utilizing both (13)C(18)O and (12)C(16)O to identify the two types of active adsorption sites for CO molecules. (3) CuMFI samples prepared by the ion-exchange method employing anhydrous CuCH(3)COO showed a surprising adsorption feature characterized by a single IR band occurring at 2159 cm(-1) due to the adsorbed CO molecules, but there was no corresponding IR band due to adsorbed N(2) molecules. A successful preparation of CuMFI, in which the monovalent copper ions exclusively occupied another one of the two types of ion-exchangeable sites, was also carried out utilizing the solid-ion exchange method using Cu(CH(3)COO)(2).H(2)O. This site exhibits an IR band occurring at 2151 cm(-1) for CO molecules and also acts as an active site for N(2) molecules. These experimental data correlate, and clearly indicate that there are at least two types of exchangeable sites for copper ions in MFI-type zeolites.     

无定形硅铝负载镍催化剂上乙烯齐聚反应的活性位点结构鉴定

镍(Ni)基催化剂在低碳烯烃聚合领域具有重要的地位,也是该领域研究的热点.自Johnson等报道(J.Am.Chem.Soc.,1995,117,6414–6415)二亚胺配体络合的Ni(Ⅱ)催化剂可有效降低烯烃聚合度,降低产物中非线性烯烃的选择性,甚至可以生成α-烯烃以来,掀起了Ni基催化剂在烯烃聚合领域的研究热潮.从均相到负载型多相Ni基催化剂,从载体类型到配体性质,从Ni纳米粒子的粒径调控到金属表面价态,关于Ni活性中心的研究工作一直存在争论.本课题组之前研究结果表明,曾明确了无定形硅铝(ASA)载体负载的Ni催化剂,经惰性气氛(N2)预处理得到的一价Ni是烯烃齐聚反应的主要活性中心(J.Chem.Soc.Chem.Commun.,1991,126–127).本文进一步深入研究了不同Al2O3含量的ASA载体上Ni活性位点的结构及其在乙烯齐聚反应中的活性.27Al NMR结果表明,催化剂中的铝存在三种配位方式,分别为AlⅣ、AlⅤ和AlⅥ,其中AlⅣ含量随Al2O3含量的增加而增加.载体中铝配位方式的不同,导致其表面金属负载的金属Ni活性位点所处的结构亦不同.原位FTIR-CO和H2-TPR实验结果表明,催化剂表面存在两种不同结构分布的Ni位点,分别是接枝在弱酸性硅醇上的Ni2+阳离子和Si?(OH)?Al桥式羟基离子交换位置的Ni2+阳离子.多数研究者认为,位于离子交换位置处孤立的Ni阳离子是反应的活性中心.然而,近期有研究者提出负载在酸性硅烷醇表面孤立的Ni2+阳离子为反应的活性中心物质.本文研究发现,随着Al2O3负载量的降低,处于离子交换位置处的Ni2+离子含量逐渐减少,而处于硅醇缺陷位点处的Ni2+离子含量则逐渐增多.原位FTIR-CO分析结果表明,处于硅醇缺陷位点处的Ni2+离子物种在惰性气氛中更易于转化为活性中心Ni+.相应的催化反应结果表明,相比于离子交换位置的Ni2+物种,具有与硅醇缺陷位点相连的Ni2+离子结构更有利于表现出更高的乙烯齐聚化活性.由此可知,处于硅醇缺陷位点的Ni2+物种是乙烯齐聚反应的活性中心的前驱体.本文进一步研究了硅醇缺陷位点处的Ni2+离子物种更易于转化为活性中心Ni+的原因.H2-TPR结果表明,相比于离子交换位置的Ni2+物种,处于硅醇缺陷位点的Ni2+物种与载体之间的相互作用力更弱.C2H4-TPD结果进一步表明,具有这种相对较弱的金属载体间作用力结构的催化剂对反应物C2H4分子的吸附作用力相对更强,吸附量也相对增多,因此其乙烯齐聚的催化性能更优.本研究结果对理解活性中心结构和合理设计催化剂提供参考.