Spectroscopic observation of the plasma produced by a CO2 laser beam interacting with titanium target under helium and/or argon atmosphere

In many laser applications such as drilling, welding and cutting, the role of the plasma in the transfer of energy between the laser beam and the metal surface appears to be rather important. It depends on several parameters such as laser wavelength, irradiation time and deposited energy but especially on the buffer gas nature. In this work the plasma is initiated by a TEA-CO₂ laser beam perpendicularly focussed onto a Ti target (100 MW/cm²), in a cell containing He, Ar or a He-Ar mixture as buffer gas. The plasma is studied by time and space resolved spectroscopic diagnostics. The results show that helium allows target erosion whereas a highly absorbing breakdown plasma develops in argon shielding the target from the subsequent laser heating. With only 20% Ar in He, a strong quenching of the He plasma by Ar occurs, and the Ar plasma effect is dominant.     

Collective behavior of laser-produced plasma from a multicomponent YBa2Cu3O7 target in air

2 Cu₃O₇, using a Q-switched Nd:YAG laser is investigated by time-resolved emission-spectroscopic techniques at various laser irradiances. It is observed that beyond a laser irradiance of 2.6×10¹¹ W cm^-2, the ejected plume collectively drifts away from the target with a sharp increase in velocity to 1.25×10⁶ cm s^-1, which is twice its velocity observed at lower laser irradiances. This sudden drift apparently occurs as a result of the formation of a charged double layer at the external plume boundary. This diffusion is collective, that is, the electrons and ions inside the plume diffuse together simultaneously and hence it is similar to the ambipolar diffusion of charged particles in a discharge plasma. Received: 30 January 1998/Revised version: 12 June 1998     

Determination of Ionization Coefficient of Atmospheric Helium in Dielectric Barrier Discharge

A weakly luminous layer close to the anode is observed at time far ahead of the current pulse in dielectric barrier discharge of helium at atmospheric pressure and it is considered as the result of a very weak Townsend discharge. Based on the assumption that the space charge produced by this Townsend discharge is too small to distort the uniform electric field in the gas gap, the electrons have more or less the same energy over the entire gap and the spatial distribution of the discharge light is proportional to the distribution of electron density. This light distribution is obtained by processing side-view photograph of discharge gap using an intensified charge coupled device camera with an exposure time of 20ns. By fitting a theoretically derived formula with the measured curve of light distribution, the Townsend electron ionization coefficient α is determined to be 31 cm^-1 at E/p = 3.6 V·cm^-1·Torr^-1, which is much higher than that obtained by solving the Boltzmann equation of pure helium. It is believed that penning ionization of helium metastables with impurity of nitrogen molecules makes great contribution to the experimentally determined α value. The contribution of this penning ionization to α is roughly estimated.     

Characterization of a collinear double pulse laser-induced plasma at several ambient gas pressures by spectrally- and time-resolved imaging

A collinear double pulse laser-induced plasma was characterised by means of a spectrally and time resolved imaging technique. The beams of two Q-switched Nd:YAG lasers were focused on a brass target in a vacuum chamber to form the plasma. The plume emission intensity and spatial distribution were recorded with temporal resolution using an intensified CCD. Using a set of interference filters, we collected images of the emission from the major target components as well as from oxygen. Both the laser inter-pulse separation (in the range between 0 and 10 s) and the ambient air pressure value (in the range between 10⁵ and 10 Pa) were varied during the experiment. At atmospheric pressure, an enhancement of the line emission from the target elements was observed for delayed laser pulses compared to coincident pulses. However, this enhancement effect tends to fall at low pressure values, and a decrease of the signal is observed for pressures under about 10⁴ Pa. Moreover, it was observed that the evaluation of the enhancement factor strongly depends on the detector field of view. The propagation of the emitting plume was also studied at several pressures and inter-pulse delays.     

In uence of ambient conditions on the laser air spark

Received: 17 June 1998/Revised version: 17 September 1998     

Recombination emissions and spectral blueshift of pump radiation from ultrafast laser induced plasma in a planar water microjet

We report spectroscopic investigations of an ultrafast laser induced plasma generated in a planar water microjet. Plasma recombination emissions along with the spectral blueshift and broadening of the pump laser pulse contribute to the total emission. The laser pulses are of 100 fs duration, and the incident intensity is around 10¹⁵ W/cm². The dominant mechanisms leading to plasma formation are optical tunnel ionization and collisional ionization. Spectrally resolved polarization measurements show that the high frequency region of the emission is unpolarized whereas the low frequency region is polarized. Results indicate that at lower input intensities the emission arises mainly from plasma recombinations, which is accompanied by a weak blueshift of the incident laser pulse. At higher input intensities strong recombination emissions are seen, along with a broadening and asymmetric spectral blueshift of the pump laser pulse. From the nature of the blueshifted laser pulse it is possible to deduce whether the rate of change of free electron density is a constant or variable within the pulse lifetime. Two input laser intensity regimes, in which collisional and tunnel ionizations are dominant respectively, have been thus identified.     

Laser-Induced Particle Jet and Its Ignition Application in Premixed Combustible Gases

A hot particle jet is induced as a laser pulse from a free oscillated Nd：YAG laser focused on a coal target. The particle jet successfully initiates combustion in a premixed combustible gas consisting of hydrogen, oxygen, and air. The experiment reveals that the ionization of the particle jet is enhanced during the laser pulse. This characteristic is attributed to the electron cascade process and the ionization of the particles or molecules of the target. The initial free electrons, which are ablated from the coal target, are accelerated by the laser pulse through the inverse Bremsstrahfung process and then collide with the neutrals in the jet, causing the latter to be ionized.     

Time evolution of the electron density and temperature in laser-produced plasmas from YBa2Cu3O7

2 Cu₃O₇ target in vacuum and the plasma thus generated was studied using time-resolved spectroscopic techniques. Line broadening of the Ba I emission line at 553.5 nm was monitored as a function of time elapsed after the incidence of a laser pulse on the target. Measured line profiles of barium species were used to infer the electron density and temperature, and the time evolution of these important plasma parameters has been worked out. Received: 23 April 1997/Revised version: 25 August 1997     

Spatial distributions of electron density in microplasmas produced by laser ablation of solids

The spatial distribution of electron density in argon microplasmas produced by laser ablation of solids has been investigated by time-resolved emission spectroscopy. The electron density was derived from Stark broadening and shift of spectral lines. It was found that the radial gradient of the electron density is much smaller than the gradient of the atomic number density of atoms ablated by the laser into the plasma. The almost homogeneous plasma conditions in the centre of the microplasmas are essential for quantitative element analysis of solid samples by laser ablation. On the other hand, because of the homogeneous conditions microplasmas are excellent sources for measurements of reliable Stark broadening and shift parameters of atomic and ionic spectral lines of all elements which can be ablated by lasers from solid samples.     

Optical Emission Spectroscopy Investigation of a Surface Dielectric Barrier Discharge Plasma Aerodynamic Actuator

The optical emission spectroscopy of a surface dielectric barrier discharge plasma aerodynamic actuator is investigated with different electrode configurations, applied voltages and driving frequencies. The rotational temperature of N2 （C^3 Ⅱu） molecule is calculated according to its rotational emission band near 380.5 nm. The average electron energy of the discharge is evaluated by emission intensity ratio of first negative system to second positive system of N2. The rotational temperature is sensitive to the inner space of an electrode pair. The average electron energy shows insensitivity to the applied voltage, the driving frequency and the electrode configuration.     

Light absorption in laser-heated cavities

The absorption of laser light in 0.25–1 mm diameter gold cavities, irradiated for the purpose of generating high-temperature blackbody radiation with intense laser radiation of either =0.44 m or =1.3 m wavelength, was investigated. For =0.44 m radiation the absorption exceeded 0.9 for all conditions, but dropped to only 0.3 for the smallest cavities irradiated at =1.3 m. Entrance hole and cavity filling with plasma seems important for the understanding of the observations.     

Transition of Discharge Mode of a Local Hollow Cathode Discharge

The discharge characteristics of hollow cathode discharge in argon in a cylindrical cavity are investigated experi- mentally. The voltage-current （V - I） characteristics and the light emission are measured. It is found that the discharge plasma is localized inside the hollow cavity, with an extensive Faraday dark space between the cathode and the anode. The discharge develops from predischarge to abnormal glow discharge, the hollow cathode effect （HCE） and a hybrid mode as the discharge current increases. The onset of the HCE is found for the first time by the transition from abnormal glow discharge together with a significant decrease in the slope of the V - I curve which shows a positive differential resistivity. The voltage increases proportionally with the current when the HCE is reached.     

Vaporization and Plasma Shielding during High Power Nanosecond Laser Ablation of Silicon and Nickel

A thermal model to describe the high-power nanosecond pulsed laser ablation is presented. It involves the vaporization and the following plasma shielding effect on the whole ablation process. As an example of Si target, we obtainthe time evolution of the calculated surface temperature, ablation rate and ablation depth. It can be seen that plasma shielding plays a more important role in the ablation process with time. At the same time, the ablation depth with laser fluence based on different models is shown. Moreover, we simulate the pulsed laser irradiation Ni target. The evolution of the transmitted intensity and the variation of ablation depth per pulse with laser fluence are performed. Under the same experimental conditions, the numerical results calculated with our thermal model are more in agreement with the experimental data.     

Electrical and optical characterization of pulsed plasma of N<Subscript>2</Subscript>–H<Subscript>2</Subscript>

This paper considers the electrical and optical characterization of glow discharge pulsed plasma in N₂/H₂ gas mixtures at a pressures range between 0.5 and 4.0 Torr and discharge current between 0.2 and 0.6 A. Electron temperature and ion density measurements were performed employing a double Langmuir probe. They were found to increase rapidly as the H₂ percentage in the mixture was increased up to 20%. This increase slows down as the H₂ percentage in the gas mixture was increased above 20% at the same pressure. Emission spectroscopy was employed to observe emission from the pulsed plasma of a steady-state electric discharge. The discharge mainly emits within the range 280–500 nm. The emission consists of N₂ (C-X) 316, 336, 358 nm narrow peaks and a broad band with a maximum at λ_max = 427 nm. Also lines of N₂, N₂ ⁺ and NH excited states were observed. All lines and bands have their maximum intensity at the discharge current of 0.417 A. The intensities of the main bands and spectral lines are determined as functions of the total pressure and discharge current. Agreement with other theoretical and experimental groups was established.     

Laser plasma thruster

The laser plasma thruster (LPT) is a new microthruster for small satellites. We report on development and testing of a prototype LPT. Some advantages of the LPT are: thruster voltage 4 V, mass less than 1 kg, power-to-thrust ratio 10 kW/N, and I_sp up to 1000 s. Typical thrust level is 250 μN with PVC fuel. Thrust of 1 mN is expected with energetic fuel. The pre-prototype continuous-thrust experiment includes the laser mount and heat sink, lens mounts, and focusing mechanism, which are coupled to the target-material transport mechanism. The target material is applied to a transparent plastic tape, and the laser is focused on a series of tracks on the tape. The tape-drive hardware and laser-drive electronics are described. Design, construction, and calibration of the thrust stand are described. During continuous operation, the exhaust plume is deflected in the direction of the moving tape. When the laser is operated in pulsed mode, the exhaust plume is perpendicular to the tape (parallel to the optical axis). This provides some thrust-vector control. Measured thrust is 70 μN with PVC fuel, and 550 μN with energetic fuel, with a specific impulse of 350 s. Received: 7 October 2002 / Accepted: 20 January 2003 / Published online: 28 May 2003 RID="*" ID="*"Corresponding author. Fax: +1-505-272-7203, E-mail: luke@iera.nmt.edu     

Shock-wave velocity of a femtosecond-laser-produced plasma

Fluorescence measurements have been used to characterize the velocity of atoms in a femtosecond-laser-produced plasma. Nanogram amounts of a copper sample were ablated by the focused radiation (λ=775 nm) of an all-solid-state laser. The laser was operated at a pulse rate of 10 Hz with an energy of 200μJ per pulse. The microplasma expanded into a defined argon atmosphere of pressures between 0.02 and 850 mbar. Atomic fluorescence was excited in the laser plume by a dye-laser pulse with the wavelength set to the line Cu I 282.4 nm. The narrowed beam of the dye-laser was directed into the plasma at different heights above the sample surface. The fluorescence radiation was measured with an échelle-spectrometer, equipped with an intensified-charge-coupled device as the detector. The velocity depends strongly on the pressure of the ambient atmosphere and the distance from the sample surface. The highest velocity found at an argon pressure of 0.02 mbar was 1.0×10⁶ cm s⁻¹.     

Semi-quantitative time resolved LIBS measurements

Received: 2 February 1996/Accepted: 20 January 1997     

Plasma plume induced during laser ablation of graphite

The plasma plume induced during ArF laser ablation of a graphite target is studied. Velocities of the plasma expansion front are determined by the optical time of flight method. Mass center velocities of the emitting atoms and ions are constant and amount to 1.7×10⁴ and 3.8×10⁴ m s⁻¹, respectively. Higher velocities of ions result probably from their acceleration in electrostatic field created by electron emission prior to ion emission. The emission spectroscopy of the plasma plume is used to determine the electron densities and temperatures at various distances from the target. The electron density is determined from the Stark broadening of the Ca II and Ca I lines. It reaches a maximum of ∼9.5×10²³ m⁻³ 30 ns from the beginning of the laser pulse at the distance of 1.2 mm from the target and next decreases to ∼1.2×10²² m⁻³ at the distance of 7.6 mm from the target. The electron temperature is determined from the ratio of intensities of ionic and atomic lines. Close to the target the electron temperature of ∼30 kK is found but it decreases quickly to 11.5 kK 4 mm from the target.     

Laser synthesis of nitrides on the surface of refractory metals immersed in liquid nitrogen

In this paper we describe an approach for the formation of composite layers on the surface of refractory metals. We show that laser radiation on refractory metals (Ti, V, Zr, Mo, Hf, Ta, and W) immersed in liquid nitrogen can provide a chemical synthesis of nitride phases on the surface of metals. The metals were subjected to pulsed laser radiation with a wavelength of 1.06 μm. The power density ranged from 10⁴ to 10⁹ W cm⁻². The synthesis of nitrides began with the formation of Me_xN_y (x > y) phases with low contents of nitrogen. When the melting point was reached at the metal surface, the quantity of MeN phases increased sharply. Study of the melting zone showed that it contained a non-uniform distribution of nitride phases. The quantity of nitrides was a maximum on the surface and decreased with the increase of the depth of melting zone. Due to the high-cooling rates, titanium nitride crystallized in the form of columns. Maximum microhardness in the Ti surface layer was up to 20,000 MPa.