Resonance absorption in the amorphous semiconductor Si12Ge10As30Te48

The complex permitivity of the amorphous semiconductor Si₁₂Ge₁₀As₃₀Te₄₈ has been measured at frequencies from 1 to 4 GHz and at temperatures from 13 to 42°C. The results show that there is resonace absorption at the resonace frequency of 1.6 GHz corresponding to a relaxation time of 2.45 × 10^?9 sec at 20°C, and that this resonance frequency increases with increasing temperature. On the basis of the model that the power loss is due to the transitions of dipoles between their equilibrium positions, the computed results are in good agreement with experimental ones. The size and the possible formation of such dipoles are also discussed.     

EPR study of crystalline and vitreous forms of the Li2OAl2O3SiO2 system

The epr spectra of V⁴⁺ and radiation centres have been studied in β-eucryptite (LiAlSiO₄), β-, γ-spodumene (LiAlSi₂O₆) and in glasses prepared by the fusion of the single crystals. It is shown that the electronic structures of the vitreous state in the Li₂OAl₂O₃SiO₂ system and that of the crystalline forms differ considerably. The change of the electronic structure on crystallization is not direct, but is realized through the intermediate state whose electronic structure differs from that of glasses and crystals.     

The effects of electrode materials on the switching behaviour of the amorphous semiconductors Si12Ge10As30Te48

The switching behaviour of the amorphous chalcogenide alloy Si₁₂Ge₁₀As₃₀Te₄₈ has been systematically investigated using silver, indium, aluminum, and graphite for electrodes. The experimental results show that the stability in both the threshold voltage for the onset of switching action, and the holding current required to maintain the conducting state, depends strongly on electrode materials. The switching mechanisms related to the electrical and thermal properties of various electrode materials are discussed, and experimental evidence of the deteriorating effect of some electrode materials is given.     

Glass formation and structure of Na2SSiO2 and Na2SB2O3 glasses

Glass-forming regions of the systems Na₂SSiO₂ and Na₂SB₂O₃ have been investigated in order to clarify whether Na₂S could be substituted for Na₂O in sodium silicate or borate glasses, and the results were interpreted in terms of the structures of silicate and borate glasses. No difference was found in the glass-forming range of SiO₂ content between the Na₂SSiO₂ and Na₂OSiO₂ systems, and the red color of Na₂SSiO₂ glasses suggests that the formation of polysulfides in the glass structure is probably due to the entrance of sulfur ions in the non-bridging sites of the glass network. On the other hand, not all of the sulfur added to the glass batches could be retained in the Na₂SB₂O₃ glasses and the amount remaining in the glass products changed depending upon the amount of sodium ions in the glasses. Only a trace of sulfur was observed in the glasses containing less than 13 mol% of Na₂S in the batches, but the sulfur content in the glasses increased steeply with sodium content up to 35 mol%, reached the maximum and then decreased slowly with sodium content. The insolubility of sulfur in the glasses with low sodium content was interpreted based on the compositional dependence of basicity of alkali-borate glasses, and the change in solubility of sulfur with sodium concentration was explained based on the well-known boron anomaly caused by the change in the coordination state of boron and on the formation of non-bridging oxygens or sulfurs in the glass structure.     

Glass formation in the systems (K or Cs)2O(Nb or Ta)2O5Al2O3

The glass-forming ability of melts in the systems K₂O(Nb and/or Ta)₂O₅Al₂O₃ as well as those in which K₂O was replaced with Li₂O, Na₂O, Cs₂O, BaO or PbO was investigated. Some melts in the systems (K or Cs)₂O(Nb and/or Ta)₂O₅Al₂O₃ could be made into glasses by cooling, yielding practically useful amounts. The structures of these glasses were discussed on the basis of their infrared spectroscopic and X-ray emission spectroscopic analyses.     

Photoconductivity of oxychalcogenide glasses in the system As2Se3CdO

The photoconductivity of oxychalcogenide glasses in the system As₂Se₃CdO was investigated. When 2–3 mol % CdO was added, the photoresponse peak of the parent glass As₂Se₃ in the vicinity of 740 nm became broader and a little weaker. The addition of more than about 4 mol % CdO brought about a sharp and strong peak at 720 nm and a broad peak at 860 nm. X-ray diffraction and electron microscopic observations revealed the presence of crystalline CdSe in the glass matrix, indicating that the reaction As₂Se₃ + 3CdO → As₂O₃ + 3CdSe took place in the melting process of these glasses. Tempeature and light intensity dependences of the photocurrent lead to the conclusion that the above spectral photoresponse is greatly affected by the presence of the dispersed crystalline CdSe.     

Small polaron conduction in V2O5P2O5 glasses

Dc conductivity measurements have been made between 90 and 520 K on three bulk samples of V₂O₅P₂O₅ glass. Heat treatment is found to result in a reduction of the activation energy at a given temperature and this is most noticeable at low temperatures. The behaviour at low temperatures can be described using Mott's variable range hopping arguments, and at high temperatures by non-adiabatic small polaron hopping between nearest neighbours. At intermediate temperatures a simple model is used in which excitations by optical and acoustic phonons are considered to make independent contributions to the jump frequency. Mott's theory is extended to the polaron case for $\text{T>}\text{1}\text{4}\text{?}$ and is shown to be in good agreement with results. Values for $\text{r}{}_{\mathrm{<mtext>p</mtext>}}\text{(～2.8}\text{A}\text{?}\text{)}$ the polaron radius and $\text{α(～3.5}\text{A}\text{?}{}^{\mathrm{?1}}\text{)}$ the electron decay constant are shown to be consistent with the model for small polarons. A method is suggested for obtaining α and N(E_F) from the ac conductivity and the slope of 1nσ versus $\text{1}\text{T}{}^{\mathrm{<mtext>1</mtext><mtext>4</mtext>}}$ at low temperatures. Values of N(E) are obtained which correlate with those obtained by the previous analysis. This implies that the disorder energy separating adjacent sites Δ₀ is large (～0.4 eV) in these materials.     

Semiconducting TiO2SiO2 glasses (I): Electronic conductivity

Semiconducting glasses, 70% TiO₂-30% SiO₂, with a Ti³⁺ content varying from zero to 7.8%, have been prepared by rf sputtering in argon/oxygen/hydrogen gas mixtures. Conduction in the Ti³⁺-containing glasses is by small polarons hopping adiabatically. The disorder energy is small (0.05 eV) compared to the hopping energy (0.37–0.51 eV). The variation of the hopping energy with Ti³⁺ content and temperature is ascribed to a polaron overlap effect and to effects arising from the random glass structure, respectively. At low temperatures conduction is a percolation process. The conduction in Ti³⁺-free glasses is not due to polarons; at low temperature these glasses exhibit variable-range hopping.     

Crystallization and phase-separation of Li2OSiO2 glass

The crystallization and phase-separation phenomena in the Li₂OSiO₂ glass are studied by positron lifetime and annihilation lineshape measurements. Analysis of the kinetic data shows three-dimensional morphology of growing crystals. Phase-separation is seen to increase the density of crystal nuclei and the rate of volume crystallization, but it does not affect the morphology. In addition, surface crystallization is detected in glasses with small degrees of phase-separation. The results are consistent with scanning electron and optical micrographs.     

Glasses and glass-ceramics from naturally occurring CaOMgOAl2O3SiO2 materials (I) glass formation and properties

Once oil is extracted from oil shales, the inorganic solid which remains is from the CaOMgOAl₂O₃SiO₂ system. The material is easily melted and forms a glass upon cooling. Its viscosity in the forming region is actually less than that of commercial soda-lime glass. Shale glasses exhibit excellent dielectric behavior, while their other properties are generally comparable to commercial glasses. These glasses appear to be promising materials for future applications.     

Short range antiferromagnetic ordering in vitreous Fe2O3P2O5

An outline is given of the theory of neutron magnetic scattering from amorphous materials, and data are presented for vitreous 0.79 Fe₂O₃ · P₂O₅. The magnetic correlation function shows that at low temperatures the glass exhibits short-range antiferromagnetic ordering with Fe³⁺?Fe³⁺ interionic distances similar to those found in crystalline FePO₄. The neutron data are not consistent with a previous suggestion that the material is microcrystalline.     

Infrared spectra and structure of superionic conducting glasses in the system AgIAg2OMoO3

Thin blown films of glasses with the mole ratio Ag₂O/MoO₃ = 1 in the system AgIAg₂OMoO₃ (or the pseudobinary system AgIAg₂MoO₄) show three absorption bands in the range 4000-200 cm^?1; 875 cm^?1 (w), 780 cm^?1 (s), and 320 cm^?1 (m, b), which are characteristic of tetrahedral MoO₄^2? ions. The glasses with the ratio Ag₂O/MoO₃ < 1 have two additional bands at 600 cm^?1 (w) and 450 cm^?1 (vw), which are characteristic of condensed ions of MoO₄ tetrahedra, probably Mo₂ O₇^2? ions. These glasses are thus composed of Ag⁺, I^?, MoO₄^2?, and probably Mo₂O₇^2? ions, and classified as “ionic” glasses containing one type of cations. The presence of partial covalency in the Ag⁺… ^?OMo link and the influence of ion exchange of Ag⁺ with K⁺ on IR spectra are discussed. The molar volume of the glasses with the ratio Ag₂O/MoO₃ = 1 is primarily determined by a fairly dense packing of the constituent anions, I^? and MoO₄^2?.     

Phase separation in GeGeO2 glasses

De Neufville prepared homogeneous glasses ranging in composition from pure GeO₂ to GeO by quenching bulk samples from the melt and by vapor deposition. For compositions in the range of 10–20 mol % excess Ge dissolved in GeO₂, he found that phase separation into amorphous Ge rich and amorphous GeO₂ phases occurred. The results reported here on a 7.5 mol % excess Ge composition using differential scanning calorimetry have shown that a two-step phase separation mechanism is operative. A homogeneous GeGeO₂ glass phase separates at 450°C into amorphous GeO₂ and amorphous GeO. The GeO phase separates at 570°C into crystalline Ge and amorphous GeO₂. The heat measured at 570°C is equal to the sum of the heats of phase separation of GeO and crystallization of Ge. The amorphous GeO₂ crystallizes at 670°C with a heat of crystallization of 4.65 kcal/mol (± 0.5). Additional support for a two-step phase separation mechanism is provided by kinetic arguments based on the viscosity dependence on composition and on the structure of the amorphous GeO phase and its stability relative to the homogeneous GeGeO₂ glass.     

11B and 27Al NMR studies of glasses in the system Na2OB2O3Al2O3 (“NABAL”)

¹¹B and ²⁷Al nuclear magnetic resonances (NMR) in glasses of the NABAL system Na₂OB₂O₃Al₂O₃ have been studied as a function of composition. From the boron data, the fraction of four-coordinated BO₄ units has been determined via computer analysis of the NMR spectra; the method is similar to that employed previously for binary and other ternary borate glasses. The ²⁷Al NMR indicates no abrupt change in the average aluminum environment. Certain linear relationships have been found which yield detailed information on the competing processes of BO₃, BO₄ and AlO₄ formation, and the formation of triclusters consisting of three tetrahedra having one oxygen in common. Furthermore, it is concluded that the oxygen available for the formation of various aluminum-containing species is a function of the soda concentration only and that the conversion to AlO₄ is favored as compared with BO₄.     

A neutron small angle scattering study of SiO2Na2 O glasses

The first results obtained by small-angle neutron scattering (SANS) study of sub-liquidus immiscibility of glasses are presented. Measurements were performed on the neutron small-angle scattering spectrometer of the Institut Laue-Langevin (Grenoble, France). The glass studied was 0.88 (SiO₂), 0.12 (Na₂O) from SiO₂Na₂O system which presents a well-known miscibility gap already explored by small-angle X-ray scattering (SAXS) method. Absolute values of the neutron scattering cross section as a function of scattering vector were obtained for this glass quenched and heat treated at 560°C for various lengths of time. It is shown that the ANS method can be used to follow phase separation kinetics and the comparison with SAXS results can in principle be used to separate the effects of density and concentration fluctuations in this system.     

Electronic structure and properties of oxide glasses (II) Basicity measured by copper(II) ion probe in Na2OP2O5, K2OB2O3 and K2SO4ZnSO4 glasses

The correlation between the basicity of oxygens measured by the Cu(II) ion probe and the non-bonding electron density on oxygens in alkali borate glasses was considered. The basicity was measured for K₂OB₂O₃, Na₂OP₂O₅ and K₂SO₄ZnSO₄ glasses and categorized into two types, δ and π, according to the symmetry property of the bonding between a Cu(II) ion and oxygen. The π basicity for borate and phosphate glasses showed an abrupt increase in the vicinity of 17 and 50 mol% alkali oxide, respectively. The values of π-type basicity varied with the composition of glass, being larger in the order: sulfate < phosphate ? borate, whereas δ basicity was constant irrespective of the glass composition. Such a change of the basicity with the composition of glass was interpreted in terms of behavior of non-bonding levels of the ligand oxygens in a glass network.     

The leaching behavior of PbOSiO2 glasses

The leached layer of PbOSiO₂ glasses formed by diluted nitric acid solution has been investigated by ellipsometry and Auger electron spectroscopy (AES). The leaching behavior of PbOSiO₂ glasses in 10^?4 N aqueous solution of NHO₃ at 30°C was measured in real time using a Nikon auto-ellipsometer.The results were applied by curve fitting to the two-layer model from the concentration profile obtained by AES, and the refractive index profile against the film thickness was determined.The leached layer is inhomogeneous and consists of a low refractive index region and a transition region. The gradient of the refractive index in the former region is extremely small and the refractive index becomes nearly constant between 1.42 and 1.44. The shape of latter region becomes stable with its thickness at 100–310 Å, and moves in the direction of depth without changing the shape as the leaching proceeds.     

Crystallization of Li2OSiO2 glass studied by positron annihilation

The crystallization of 34 Li₂O65 SiO₂1 P₂O₅ glass has been studied by positron annihilation. The changes in the positron lifetime spectra have been correlated to the magnitude of the amorphous X-ray scattering. A linear relationship has been found for heat-treatment temperatures less than 700°C, above which non-linear phenomena in the lifetime spectra set in. The volume crystallinity reaches a saturation value, which varies from 70% at the heat-treatment temperature of 535°C to 80% at 700°C because of the phase separation. The dimensionality of the crystal growth in this glass is found to be n = 1.5 ± 0.1. The effect of the phase separation on the rate and dimensionality of the crystallization is discussed. The results show that positron annihilation is a sensitive and accurate method to follow crystallization in vitreous materials.     

Brillouin scattering measurements of attenuation and velocity of hypersounds in SiO2B2O3 glasses

Measurements of hypersound wave velocity and attenuation (20–30 GHz) were made at room temperature by Brillouin scattering in SiO₂O₂O₃ glasses. The attenuation shows a maximum with composition. An explanation of this maximum is given in relation to the glass structure. It is thought that this maximum may be due to a coupling effect of hypersounds with structural relaxational process involving SiSi and SiOB bonds.     

Electrical conductivity and photoconductivity of As2S3PbS glasses

Measurements of dc electrical conductivity and photoconductivity of various glassy compositions (x = 0.1?0.625) in (As₂S₃)_1?x(PbS)_x have been made. Experimental results of the temperature dependence of dc conductivity from room temperature to 200°C (which includes the glass transition temperature) are reported. All the compositions exhibit intrinsic conduction in the measured temperature range. Thermal activation energy, glass transition temperature and σ₀ for the compositions studied, were determined from the experimental data. The low value of $\text{σ}{}_0\text{(10?10}{}^{\mathrm{?2}}\text{Ω}{}^{\mathrm{?1}}\text{cm}{}^{\mathrm{?1}}$) in these semiconducting glasses is attributed to the greater participation of localized states in the conduction process.In the measurements of photoconductivity, the variation of photocurrent with temperature, photon energy, light intensity and electric field is observed. The recombination model has been involved to explain the results of photoconductivity. Both electrical and photoconductivity data support the presence of higher density of localized states in the x = 0.1 composition than in others.