Monte-Carlo simulations of rotating clusters

A new scheme for estimating densities of states at non zero angular momentum is proposed, using the Monte-Carlo (MC) and multiple histogram methods. It is based on a rigorous expression of the classical density of states for a rotating system. Two features appear: the centrifugal energy ( angular momentum and I the instantaneous inertia tensor in the center of mass reference frame) is added to the potential energy and the configurational densities of states is weighted by . Comparing the MC results for the 13-atom Lennard-Jones cluster and a calculation based on molecular dynamics (MD) shows that this weight is important if the rotation induces a structural change at a finite temperature. The MC algorithm proves to be much more efficient than MD, even at finite . Received: 27 January 1998 / Received in final form: 15 June 1998 / Accepted: 18 June 1998     

Wavelet method for solving integral equations of simple liquids

A new algorithm is developed to solve integral equations for simple liquids. The algorithm is based on the discrete wavelet transform of radial distribution functions. The Coifman 2 basis set is employed for the wavelet treatment. Using the algorithm, we have calculated structural and thermodynamic properties of a Lennard–Jones fluid in a wide range of energy and size parameters of the fluid.     

Modified independent modal space control of m.d.o.f. systems

The performance of the independent modal space control (IMSC) algorithm for structural vibration control is examined in this paper. Both the theoretical analysis and numerical simulation show that, for a multi-degree-of-freedom system, the modal control forces may increase the contributions of the vibration of higher modes (uncontrolled modes) to the system response if the IMSC algorithm is used to design a structural control system. Therefore, the responses of the controlled structure may be underestimated if the effects of control forces on the higher modes are not considered in the response analysis. A new control algorithm—modified independent modal space control (MIMSC) algorithm is proposed in this paper for eliminating the effect of modal control force on the uncontrolled modes. Numerical example shows that the structural responses can be effectively reduced when control system design is carried out based on the proposed algorithm. By comparing the simulated results obtained by the IMSC and MIMSC algorithms, it is found that, in order to achieve the same control objective, the proposed algorithm is more effective than IMSC since the modal control forces do not have any effect on the uncontrolled modes. In order to verify the effectiveness of the proposed algorithm, a practical example—active control design of UCLA Math-Science Building is presented and discussed.     

基于节能的绿色光网络路由算法的研究

在传统的网络路由算法中,一般采用最短路径算法进行路由选路,最短路径算法以节点间的距离为权重,计算一条由源节点至目的节点的权重最小的路径以完成路由。最短路径算法虽然最小化了距离长度代价,却没有考虑能耗问题,所以使用最短路径算法所得出路径的能耗并不一定是最小的。针对这一问题,提出一种新型的综合性绿色路由算法,设定能耗作为节点间的权重,融合光旁路及业务量疏导,同时考虑路由和波长分配(RWA)问题,将完成每个业务所需要的能耗最小化,实现节能。仿真结果表明,与最短路径算法相比,绿色路由算法在较大规模网络中能够节省约40%的能耗,节能效果相当显著。     

Investigation of active structural intensity control in finite beams: theory and experiment

An investigation of structural intensity control is presented in this paper. As opposed to previous work, the instantaneous intensity is completely taken into account in the control algorithm, i.e., all the terms are considered in the real-time control process and, in particular, the evanescent waves are considered in this approach. A finite difference approach using five accelerometers is used as the sensing scheme. A feedforward filtered-X least mean square algorithm is adapted to this energy-based control problem, involving a nonpositive definite quadratic form in general. In this respect, the approach is limited to cases where the geometry is such that the intensity component will have the same sign for the control source and the primary disturbance. Results from numerical simulations are first presented to illustrate the benefit of using a cost function based on structural intensity. Experimental validation of the approach is conducted on a free-free beam covered with viscoelastic material. A comparison is made between classical acceleration control and structural intensity control and the performance of both approaches is presented. These results confirm that using intensity control allows the error sensors to be placed closer to the control source and the primary disturbance, while preserving a good control performance.     

Minimum energy control and optimal-satisfactory control of Boolean control network

In the literatures, to transfer the Boolean control network from the initial state to the desired state, the expenditure of energy has been rarely considered. Motivated by this, this Letter investigates the minimum energy control and optimal-satisfactory control of Boolean control network. Based on the semi-tensor product of matrices and Floyd?s algorithm, minimum energy, constrained minimum energy and optimal-satisfactory control design for Boolean control network are given respectively. A numerical example is presented to illustrate the efficiency of the obtained results.     

深紫外准分子激光实时曝光剂量控制算法研究

提出了一种面向步进扫描投影光刻机的深紫外准分子激光实时曝光剂量控制算法。通过建立扫描曝光过程的抽象模型并分析准分子激光器单脉冲能量波动特性,提出采用闭环反馈控制进行实时调节,着重研究了抑制单脉冲能量超调和随机波动的有效算法。在一台波长为193 nm、重复频率为4 kHz、单脉冲能量为5 mJ的ArF准分子激光器上进行了实验研究。结果表明,当脉冲个数仅为20时算法控制下的剂量精度即可达0.89%,不但满足亚微米光刻越来越严的剂量要求,而且有助于提高光刻机生产效率和激光器使用效率。     

Reconstruction of Optical Energy Deposition for Backward Optoacoustic Imaging

Visualizing optical properties, such as the optical absorption coefficient, helps us to obtain structural information of biological tissues. In this paper, we present an efficient reconstruction algorithm for optical energy deposition in backward optoacoustic imaging. Note that econstruction of optical energy deposition is the first step to imaging the optical absorption coefficient distribution. This algorithm is derived from the optoacoustic wave equations with line focusing, in which the focusing techniques were utilized to reduce the reconstruction problem from three dimensions (3-D) to one dimension (1-D). Simulations and experiments were conducted to verify efficacy of this algorithm. In the simulations, optoacoustic signals were generated based on the solution of the optoacoustic wave equations. In the experiments, a 3-D backward mode optoacoustic imaging system was built. The system consisted of a Nd YAG laser for optical irradiation and an acoustic detection system with a broadband hydrophone. A phantom was used to illustrate validity of the proposed algorithm. The results show that optical energy deposition can be efficiently reconstructed in both simulations and experiments.     

离散混沌系统的最小能量控制

对于离散混沌系统的最小能量控制问题，提出了一种框架性方法，该方法具有通用性.首先，设计一个二次目标函数，同时把混沌系统分解为线性部分和非线性部分两项和.然后，提出了求解非线性最优控制问题的两级算法：第一级对混沌系统中的非线性部分进行预估，以使原系统变为带有常数项的线性系统；第二级用动态规划求解一个非典型线性二次最优控制问题，并把解返回第一级，第一级根据第二级的解对非线性部分重新预估.这样通过两级间不断的信息交换，最终得到混沌系统的最优控制律.该方法不仅实现了对混沌系统的控制，而且在整个控制过程中消耗的控制能量最小. 关键词： 混沌系统 两级优化 最优控制     

Energy dissipation characteristics of particle sloshing in a rotating cylinder

A study on the energy dissipation characteristics of granular materials flowing/sloshing in a rotating container is presented here. The objective is to develop a configuration for control of excessive structural oscillations, similar to those of tuned vibration absorbers and tuned sloshing absorbers. The effectiveness of energy dissipation through granular flow is primarily determined experimentally. A computational model is developed to understand the flow behavior and energy dissipation in this system. A promising kinematic match of the particle behavior is demonstrated between the numerical predictions and the experimental observations. The use of the granular flow in a rotating drum for vibration control is being investigated for the first time.     

一种基于可变扇区的非均匀分簇算法

针对LEACH协议中簇首分布不均匀,网络能耗不均衡的问题,提出一种基于可变扇区的非均匀分簇的算法（UCBVS）。首先,利用可变扇区和同心圆将网络合理的动态划分,使得距离基站近的区域分区较小;其次,选取簇内权值大的节点作为簇头,根据权值的大小判断是否进行簇头轮换;最后采用单跳和多跳相结合的方式进行网络通信。仿真结果表明,改进算法能够保证簇头节点能耗均匀,延长了网络生命周期。     

基于脉冲分组的光剂量监控新算法

精确控制脉冲激光加工光剂量是保证加工产品工艺和质量的关键。在对现有的光剂量控制算法进行分析后,提出了基于脉冲分组的光剂量监控新算法,有效提高了光剂量监测精度和反馈控制速度。设计了光剂量监控系统,实现了脉冲激光加工光剂量实时监测及反馈控制。与Ophir公司的StarLab激光能量测量系统相比,500个激光脉冲以内的总能量测量,本系统测量误差不超过±0.1 5%。对一套脉冲最大重复频率为10 kHz、单脉冲最大能量为5 mJ、恒压工作下最大能量波动为±10%的脉冲激光加工系统光剂量进行了监控实验。在本系统的监控下,可将日标光剂量为150 mJ/mm~2以内的加工光剂量控制精度和重复精度分别控制在0.90%和0.100mJ/mm~2以内,同时将光剂量反馈控制速度提高了4倍。     

New developments in the multiscale hybrid energy density computational method

Further developments in the hybrid multiscale energy density method are proposed on the basis of our previous papers. The key points are as follows.(i) The theoretical method for the determination of the weight parameter in the energy coupling equation of transition region in multiscale model is given via constructing underdetermined equations.(ii)By applying the developed mathematical method, the weight parameters have been given and used to treat some problems in homogeneous charge density systems, which are directly related with multiscale science.(iii) A theoretical algorithm has also been presented for treating non-homogeneous systems of charge density. The key to the theoretical computational methods is the decomposition of the electrostatic energy in the total energy of density functional theory for probing the spanning characteristic at atomic scale, layer by layer, by which the choice of chemical elements and the defect complex effect can be understood deeply.(iv) The numerical computational program and design have also been presented.     

Molecular Weight Distribution Control for Polymerization Processes Based on the Moment-Generating Function

The molecular weight distribution is an important factor that affects the properties of polymers. A control algorithm based on the moment-generating function was proposed to regulate the molecular weight distribution for polymerization processes in this work. The B-spline model was used to approximate the molecular weight distribution, and the weight state space equation of the system was identified by the subspace state space system identification method based on the paired date of B-spline weights and control inputs. Then, a new performance criterion mainly consisting of the moment-generating function was constructed to obtain the optimal control input. The effectiveness of the proposed control method was tested in a styrene polymerization process. The molecular weight distribution of the styrene polymers can be approximated by the B-spline model effectively, and it can also be regulated towards the desired one under the proposed control method.     

Virtual sensors for active noise control in acoustic-structural coupled enclosures using structural sensing: part II--Optimization of structural sensor placement

The work proposed an optimization approach for structural sensor placement to improve the performance of vibro-acoustic virtual sensor for active noise control applications. The vibro-acoustic virtual sensor was designed to estimate the interior sound pressure of an acoustic-structural coupled enclosure using structural sensors. A spectral-spatial performance metric was proposed, which was used to quantify the averaged structural sensor output energy of a vibro-acoustic system excited by a spatially varying point source. It was shown that (i) the overall virtual sensing error energy was contributed additively by the modal virtual sensing error and the measurement noise energy; (ii) each of the modal virtual sensing error system was contributed by both the modal observability levels for the structural sensing and the target acoustic virtual sensing; and further (iii) the strength of each modal observability level was influenced by the modal coupling and resonance frequencies of the associated uncoupled structural/cavity modes. An optimal design of structural sensor placement was proposed to achieve sufficiently high modal observability levels for certain important panel- and cavity-controlled modes. Numerical analysis on a panel-cavity system demonstrated the importance of structural sensor placement on virtual sensing and active noise control performance, particularly for cavity-controlled modes.     

基于自适应模糊控制的节能装置研究

针对凹版印刷干燥设备,设计节能装置,该装置利用压缩机换热原理,对余热进行再循环利用。设计自适应模糊PID节能控制系统,完成对压缩机,调功器,变频器的实时控制。利用组态软件完成系统界面设计,人机交互简洁,操作方便。控制算法采用自适应模糊PID控制,依靠数据信息来调整模糊逻辑系统的参数,通过在线计算得到最佳控制器参数,抑制不确定性对系统的影响。将节能装置应用到凹版印刷机,实验数据显示,系统耗能减少,效率得到提高,达到节能目的,证明了节能系统的有效性,具有较强的应用价值。     

浅海声场单模闭环发射的最佳估计算法

提出了一种浅海声场单模闭环发射的最佳估计算法。通过对声场格林函数矩阵估计协方差的分析,设计了一种对格林函数矩阵作最佳估计的最佳发射阵权系数矩阵,此权系数矩阵为酉矩阵且各元素绝对值相等。基于此矩阵的单模发射算法可以使得单模激发过程以最快的速度收敛,并且发射稳定。算法的优势在模拟计算中得到了验证。最后给出了海上实验的结果,单模含量高达97%。      

油田丛式抽油机井群集中控制系统的设计

为了解决油田抽油机采油效率和能耗较低等问题,本课题在抽油机单井变频节能控制技术的基础上,研发了丛式抽油机井群单井多模式柔性控制器,并建立丛式机井群一拖四的集中控制方案。通过选择合理的优化算法,实现了单井柔性控制与井组集中优化控制的有机结合,有针对性的提高了井群的整体能效。现场测试效果表明：该丛式抽油机柔性集中控制系统能够适应现场工况条件,实现抽油机井群系统的优化控制,并且能达到较好的控制效果与节能效果。     

一种无线传感器网络健壮性可调的能量均衡拓扑控制算法

无线传感器网络中, 应用环境的干扰导致节点间距不能被准确度量. 所以利用以节点间距作为权重的闭包图(EG)模型构建的拓扑没有考虑环境的干扰, 忽略了这部分干扰带来的能耗, 缩短了网络生存时间. 针对无线传感器网络拓扑能量不均的特点和EG模型的缺陷, 首先引入节点度调节因子, 建立通信度量模型和节点实际生存时间模型; 其次量化网络节点度, 从而获取满足能量均衡和网络生命期最大化需求的节点度的取值规律; 然后利用该取值规律和函数极值充分条件解析推导出网络最大能量消耗值和最长生存时间, 并获得最优节点度; 最后基于以上模型提出一种健壮性可调的能量均衡拓扑控制算法. 理论证明该拓扑连通且为双向连通. 仿真结果说明网络能利用最优节点度达到较高的健壮性, 保证信息可靠传输, 且算法能有效平衡节点能耗, 提高网络健壮性, 延长网络生命周期.     

Experimental implementation of a self-tuning control system for decentralised velocity feedback

Simulations have previously shown that, for broadband excitation, adjusting the gain of a local velocity feedback loop to maximise their absorbed power also tends to minimise the kinetic energy of the structure under control. This paper describes an experimental implementation of multiple velocity feedback loops on a flat panel, whose gains can be controlled automatically by an algorithm that maximises their local absorbed power. Taking care to remove excessive phase shift in the control loop allows a stable feedback gain that is high enough to experimentally demonstrate the transition in control action between optimum damping and pinning of the structure. A simple search algorithm is then used to adapt the feedback gains of two control loops to maximise their local absorbed powers, thus demonstrating self-tuning. By measuring the power absorbed by each of these loops and also estimation of the kinetic energy of the plate from velocity measurements for a wide range of the two feedback gains, it is shown that not only does the adaptive algorithm converge to a set of feedback gains that maximise total power absorbed by the two feedback loops, but also that this set of feedback gains is very close to those that minimise the measured kinetic energy of the panel.