Coordination Number Change of Ln3+ Ions in Anhydruos Alcoholic LnCl3 Solutions in the Glassy State

Raman spectroscopic measurements were carried out for anhydrous alcoholic rare earth chloride solutions (LnCl₃ · 20ROH; ROH = MeOH, EtOH, and n-PrOH) in the glassy state at liquid nitrogen temperature. Series behavior of the Ln–Cl stretching Raman band is examined in conjunction with the formation of chloro complexes. The results are summarized as follows: (1) Comparing the results with those in the liquid state at room temperature, more Cl^- ions tend to coordinate to heavy rare earth ions in the three alcohol solutions upon going from a liquid to a glassy state, while the coordination number of the Cl^- ions of the light rare earth ions remains almost unchanged on vitrification. (2) In the former half region of the rare earth series, the coordination number of the Cl^- ions of the rare earth ions in the methanol LnCl₃ solution is apparently the same as that in the ethanol LnCl₃ solution. (3) In the latter half region, the higher chloro complexes, such as [LnCl_x+1(ROH)_y-2]^(z-1) (x + y = 8; x = 1, z = 2 or x = 2, z = 1) are more abundant in the methanol LnCl₃ solution than in the ethanol and n-propanol LnCl₃ solutions.     

Competitive Coordination of Chloride and Fluoride Anions Towards Trivalent Lanthanide Cations (La3+ and Nd3+) in Molten Salts

Molten salt electrolysis is a vital technique to produce high-purity lanthanide metals and alloys. However, the coordination environments of lanthanides in molten salts, which heavily affect the related redox potential and electrochemical properties, have not been well elucidated. Here, the competitive coordination of chloride and fluoride anions towards lanthanide cations (La³⁺ and Nd³⁺) is explored in molten LiCl-KCl-LiF-LnCl₃ salts using electrochemical, spectroscopic, and computational approaches. Electrochemical analyses show that significant negative shifts in the reduction potential of Ln³⁺ occur when F⁻ concentration increases, indicating that the F⁻ anions interact with Ln³⁺ via substituting the coordinated Cl⁻ anions, and confirm [LnCl_xF_y]^3−x−y (y_max=3) complexes are prevailing in molten salts. Spectroscopic and computational results on solution structures further reveal the competition between Cl⁻ and F⁻ anions, which leads to the formation of four distinct Ln(III) species: [LnCl₆]³⁻, [LnCl₅F]³⁻, [LnCl₄F₂]³⁻ and [LnCl₄F₃]⁴⁻. Among them, the seven-coordinated [LnCl₄F₃]⁴⁻ complex possesses a low-symmetry structure evidenced by the pattern change of Raman spectra. After comparing the polarizing power (Z/r) among different metal cations, it was concluded that Ln−F interaction is weaker than that between transition metal and F⁻ ions.     

Different Complexation of Nd3+ and Sm3+ with L-Malic Acid

Complexation of Nd³⁺ and Sm³⁺ ions with L-malic acid (H₃Mal) in aqueous solutions (I = 0.1 mol/l KCl) was studied by pH-metric titration at the molar concentration ratios of H₃Mal : lanthanide equal to 1 : 2, 1 : 1, 2 : 1 in the pH range 2.8–9.5. Mathematical modeling of composite equilibrium processes was used to determine the compositions and stability constants of Nd(III) and Sm(III) L-malate complexes. It was found that in addition to the 1 : 1 and 1 : 2 complexes with different degree of deprotonation, the protonated L-malate complexes and hydroxo complexes of these metals were also formed. The Sm³⁺ and Nd³⁺ ions were established to behave differently during complexation with H₃Mal.     

Nd3+ and Am3+ ion interactions with sulfate ion and their influence on NdPO4(c) solubility

The effects of Nd(III)/Am(III) complexation with sulfate were studied by 1) re-examining existing data for the Am–SO₄ system using more, advanced aqueous electrolyte models valid to high concentration to obtain reliable thermodynamic data for SO ₄ ^2– complexes or ion interactions with Nd³⁺ and Am³⁺ and 2) conducting experimental solubility studies of NdPO₄(c), an analog phase of AmPO ₄ (c), a possibly important phase in high level nuclear wastes, in the presence of SO ₄ ^2– to test the newly developed thermodynamic model and show the possible influence of sulfate in a repository environment. The data showed that the increase in the solubility of NdPO ₄ (c) resulted primarily from the increase in ionic strength. Slightly higher observed Nd concentrations in the presence of sulfate, as compared with concentrations predicted at the experimental ionic strengths, resulted from the weak complexes or ion interactions involving Nd ³⁺ –SO ₄ ^2– . The Pitzer ion interaction parameters, applicable to 0.5m sulfate, were obtained for Am ³⁺ –SO ₄ ^2– from a reinterpretation of known solvent extraction data. These parameters are also consistent with literature data for Am ³⁺ /Na⁺ exchange and solvent extraction in the presence of sulfate. When used for the analogous Nd ³⁺ –SO ₄ ^2– system to predict NdPO ₄ (c) solubility in the presence of sulfate, they provided excellent agreement between the predicted and the observed solubilities, indicating that they can be reliably used to determine Nd ³⁺ or Am ³⁺ ion interactions with SO ₄ ^2– in all ground waters where SO ₄ ^2– is less than 0.5m     

Ternary Chlorides of the Trivalent Early Lanthanides. Phase diagrams,crystal structures and thermodynamic properties

A comprehensive review on phase diagrams, crystal structures and thermodynamics of ternary chlorides formed in systems ACl/LnCl₃ (A=Cs, Rb, K, Na; Ln=La−Gd) is presented. The review summarizes the author’s own studies, published since 1985, and original papers of other scientists. With the larger alkali metal ions compounds such as A₃LnCl₆, A₂LnCl₅ and ALn₂Cl₇were obtained. With sodium additional compounds NaLnCl₄ and Na₃Ln₅Cl₁₈ were obtained. The crystal structures are discussed with the concept of ionic radii, which determine the coordination numbers of Ln³⁺ and A⁺ cations against Cl⁻ anions. The formation enthalpies of the compounds from ACl and LnCl₃ were determined by solution calorimetry. Gibbs’ free energies and entropies for these reactions were obtained by e.m.f. measurements vs. temperature. The stability of a ternary chloride in a systemACl−LnCl₃ is given by the ‘free enthalpy of synproportionation’, that is, the formation of a compound from its neighbour compounds in the system. This ΔG ⁰ _syn must be negative. A surprising result is, that the highest-melting compounds in the systems, A₃LnCl₆, are formed from ACl+A₂LnCl₅ by a loss in lattice energy. They exist as high-temperature compounds due to sufficiently high gain in entropy at temperatures whereTΔS>ΔH. This revised version was published online in August 2006 with corrections to the Cover Date.     

Kinetics and equilibrium of the complexation of Al3+ with poly(maleic, acrylic) acid

Kinetics and equilibrium of the complexation of Al³⁺ with a polycarboxylic acid (PCA, random copolymer of maleic and acrylic acid with a mean molecular weight of 92 kDa) are investigated by the stopped flow technique and potentiometric titration. The complexation proceeds according to the Eigen–Tamm mechanism, i.e. in first diffusion-controlled step an outer sphere complex is formed. The second rate determining step is the formation of the inner sphere complex, controlled by the exchange rate of hydration water. For this second step the rate constant is k ₁=3 s^-1. It is in the order of magnitude of the water exchange at the Al³⁺ ion as expected for the Eigen–Tamm mechanism. The activation parameters are also determined. Parallel to this direct reaction path a base catalyzed path is found, typical for complexation reactions of hydrolyzable metal ions. Stable complexes are formed for which the overall association constant K _ass=Q _o(1+K _i) is determined by two parts: a chemical (intrinsic) part, described by the inner sphere association constant K _i=3 and an electrostatically controlled part described by the outer-sphere association quotient Q _o. The evaluation of the kinetic experiments allows to determine the value of log(Q _o) as a function of pH: 3.3<log Q _o<4.6. From these data the potential is calculated in the range −67 to ∝93 mV at pH values between 2 and 4. For comparison, analogous experiments with the monomeric subunits of the polyacid, glutarate (GA), and tricarballylate (TCA), are performed. The complexation with the monomeric subunits glutaric- and tricarballylic acid can be explained within the classical view of a discrete outer sphere association constant Q _o. Received: 13 November 1997 Accepted: 24 March 1998     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Kinetics of the complexation of Al3+ with aminoacids,IDA and NTA

The kinetics of the complexation of Al³⁺ with aminoacids, IDA and NTA are investigated by the stopped flow method with conductivity detection in the range of pH < 4. Reaction amplitudes and pseudo-first-order rate constants are evaluated yielding equilibrium and rate constants. It is shown that Al³⁺ forms only complexes with the negatively charged species and that the kinetics of all investigated ligands can be explained with the same reaction scheme. For aspartic acid, IDA and NTA a stepwise complexation is observed where monodentate complexes are formed by a fast reaction (2s ⁻¹ < k < 20s¹) which is base catalyzed. The rate determining step is the solvent exchange at Al³⁺ according to the Eigen-Wilkins mechanism. However, the ligand influences this exchange rate and a linear free energy relation is found between log k and pK_a, which also describes the kinetics of other ligands. This fast reaction is followed by the much slower formation of chelates (for NTA:k = 0.27 s ⁻¹) which is controlled by the deprotonation of the nitrogen atom. The overall association constant of the Al-NTA complex is determined as log (K_ass/dm³mol⁻¹) = 13.0 ± 0.3. © 1996 John Wiley & Sons, Inc.     

Conductance Studies on Complex Formation Between Aza-18-Crown-6 with Ag+, Hg2+ and Pb2+ Cations in DMSO–H2O Binary Solutions

The complexation reactions between Ag⁺, Hg²⁺ and Pb²⁺ metal cations with aza-18-crown-6 (A18C6) were studied in dimethylsulfoxide (DMSO)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes in most cases is 1:1(ML), but in some cases 1:2 (ML₂) complexes are formed in solutions. A non-linear behaviour was observed for the variation of log K _f of the complexes vs. the composition of the binary mixed solvents. Selectivity of A18C6 for Ag⁺, Hg²⁺ and Pb²⁺ cations is sensitive to the solvent composition and in some cases and in certain compositions of the mixed solvent systems, the selectivity order is changed. The values of thermodynamic parameters (ΔH _c^o, ΔS _c^o) for formation of A18C6–Ag⁺, A18C6–Hg²⁺ and A18C6–Pb²⁺ complexes in DMSO–H₂O binary systems were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Thermodynamic and Structural Trends in Hexavalent Actinyl Cations: Complexation of Dipicolinic Acid with NpO22+ and PuO22+ in Comparison with UO22+

The complexation of NpO₂²⁺ and PuO₂²⁺ with dipicolinic acid (DPA) has been investigated in 0.1 M NaClO₄ by spectrophotometry, microcalorimetry, and single crystal diffractometry. Formation of 1:1 and 1:2 (metal/ligand molar ratio) complexes of DPA with NpO₂²⁺ and PuO₂²⁺ were identified and the thermodynamic parameters were determined and compared with those of UO₂²⁺. All three hexavalent actinyl cations form strong 1:1 DPA complexes with slightly decreasing but comparable stability constants from UO₂²⁺ to PuO₂²⁺, whereas the stability constants of the 1:2 complexes (log β₂) decrease substantially along the series (16.3 for UO₂L₂^2?, 15.17 for NpO₂L₂^2?, and 14.17 for PuO₂L₂^2? at 25 °C). The enthalpies of complexation for the 1:2 complexes become less exothermic from UO₂L₂^2? (?28.9 kJ mol^?1), through NpO₂L₂^2? (?27.2 kJ mol^?1), and to PuO₂L₂^2? (?22.7 kJ mol^?1). The trends in the thermodynamic parameters are discussed in terms of the effective charge of the cations and the steric constraints in the structures of the complexes. In addition, the features of the absorption spectra, including the wavelength and intensity of the absorption bands, are related to the perturbation of the ligand field and the symmetry of the actinyl complexes.     

Study of Complex Formation Between Dicyclohexano-18-Crown-6 (DCH18C6) with Mg 2+, Ca2+, Sr 2+, and Ba2+ Cations in Methanol–Water Binary Mixtures Using Conductometric Method

The complexation reactions between Mg²⁺,Ca²⁺,Sr²⁺ and Ba²⁺ metal cations with macrocyclic ligand, dicyclohexano-18-crown-6 (DCH18C6) were studied in methanol (MeOH)–water (H₂O) binary mixtures at different temperatures using conductometric method . In all cases, DCH18C6 forms 1:1 complexes with these metal cations. The values of stability constants of complexes which were obtained from conductometric data show that the stability of complexes is affected by the nature and composition of the mixed solvents. While the variation of stability constants of DCH18C6-Sr ²⁺ and DCH18C6-Ba²⁺versus the composition of MeOH–H₂O mixed solvents is monotonic, an anomalous behavior was observed for variations of stability constants of DCH18C6-Mg²⁺ and DCH18C6-Ca²⁺ versus the composition of the mixed solvents. The values of thermodynamic parameters (ΔH_c°, ΔS_c°) for complexation reactions were obtained from temperature dependence of formation constants of complexes using the van’t Hoff plots. The results show that in most cases, the complexation reactions are enthalpy stabilized but entropy destabilized and the values of thermodynamic parameters are influenced by the nature and composition of the mixed solvents. The obtained results show that the order of selectivity of DCH18C6 ligand for metal cations in different concentrations of methanol in MeOH–H₂O binary system is: Ba²⁺>Sr²⁺>Ca²⁺> Mg²⁺.     

Thermodynamics of 15-Crown-5 Complexation with Ag+ and Pb2+ Ions

Heats and constants of 15-crown-5 (R) complexation with silver and lead ions at 298, 308, and 318 K are determined using direct calorimetry. Thermodynamic parameters (G°, H°, S°, and C _p°) of formation of AgR⁺ and PbR²⁺ complexes at various temperatures are calculated. The effects of the properties of the cations and crown ethers on the thermodynamic parameters of complexation are discussed.     

Effect of the Excitation of the 4f Shell of Eu(fod)3 on the Formation of Complexes with 1,10-Phenanthroline

The effect of the electronic excitation of the -diketonate Eu(fod)₃ (fod is 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyloctanedione-3,5) on complexation with 1,10-phenanthroline (phen) in benzene solutions was studied. The excitation of the f–f transitions of Eu³⁺ increased the stability of the Eu(fod)₃ · phen complex, thus providing direct evidence for the involvement of the 4f shell of Eu³⁺ in chemical bonding. The thermodynamic parameters of complexation were determined. The temperature quenching of Eu(fod)₃ · phen luminescence was studied.     

(Ca,Me)La4Si3O13:Eu3+(Me=Sr,Ba)荧光粉的结构和发光特性

采用高温固相法制备了(Ca,Me)La4Si3O13∶Eu3+(Me=Sr,Ba)系列红色荧光体,考察了Eu3+掺杂浓度和Sr2+,Ba2+置换对荧光体结构和发光特性的影响。Eu3+最佳掺杂浓度为nEu3+∶nLa3+=1∶7,5D0-7F2与5D0-7F1跃迁发射强度比为2.55。Eu3+掺杂使晶胞参数a和c呈线性变小,对c的影响大于a,使a/c比增大。Sr2+和Ba2+分别置换基质中的Ca2+可以形成完全固溶体,晶胞参数随Sr2+或Ba2+的置换量增加呈线性增大,使a/c比减小。各发射峰强度在Sr2+置换量为0.4 mol时出现极大值,但随Ba2+置换量的增加而不断增强,全置换后荧光强度最大。荧光体的色坐标为(0.638 5,0.353 0)。     

Study of complexation reactions between alkali and alkaline-earth metal cations with dibenzo-18-crown-6(DB18C6) in mixed nonaqueous solvents using the conductometry method

The complexation reactions between alkali and alkaline-earth metal cations with DB18C6 were studied in acetonitrile-methanol (AN-MeOH) and tetrahydrofuran-threechloromethane (THF-CHCl₃) binary mixtures at different temperatures using the conductometric method. The obtained results show that in most cases, the DB18C6 forms 1:1 complexes with these metal cations and the stability of the complexes is affected by the nature and composition of the mixed solvents. The stability order of complexes in AN-MeOH binary systems was found to be Na⁺ > Li⁺, and in the case of THF-CHCl₃ binary mixtures was Na⁺ > Ba²⁺ > Li⁺. An anomalous and interesting behavior was observed for the case of complexation of a K+ ion with DB18C6 in the AN-MeOH binary mixture and also for complexation of Mg²⁺ and Ca²⁺ cations with this ligand in pure THF and also in THF-CHCl₃ binary systems. The values of the thermodynamic parameters (ΔH _c ^o and ΔS _c ^o ) for complexation reactions obtained from the temperature dependence of the stability constants and the results show that the complexes are both enthalpy-and entropy-stabilized. The text was submitted by the authors in English.     

Determination of Fe2+ and Fe3+ in Aqueous Solutions Containing Food Chelators by Differential Pulse Anodic Stripping Voltammetry

The objective was to investigate interactions between iron and food chelators in an aqueous environment. The net complexation were investigated by DPASV in a NaClO₄ electrolyte using a platinum electrode. The experimental conditions were simulating the environment of the human duodenum. The results indicated a net coordination affinity between Fe²⁺ and the organic acids in the following order; ascorbic acid≈phytate>pyruvate>lactate>acetate. For Fe³⁺ net complexation, the stability was in the order of lactate>phytate>pyruvate>acetate>citrate. In conclusion, DPASV in conjunction with a platinum electrode is suitable for studies in aqueous systems where the net complexation of metal is important.     

On the size variation of the primary solvation sphere of Nd3+ and Tm3+ in mixed system of methanol and water

The stability constants, ₁, of each monochloride complex of Nd(III) and Tm(III) have been determined in the mixed system of methanol and water with 1.0 mol·dm^–1 ionic strength using a solvent extraction technique. The values of ₁ of Nd(III) and Tm(III) increase as the mole fraction of methanol in the mixed solvent system (X _s) increases. However, the variation mode of ₁ againstX _s in the region of 0.00X _s0.40 differs from each other, a concave curve for the Nd(III) and a convex curve for the Tm(III). The LnCl²⁺ formed is present as a solvent-shared ion-pair. Since Cl^– is a structure breaking ion, it was assumed that the primary solvation sphere of Ln³⁺ directly contacted with Cl^–. Calculation of Ln³⁺–Cl^– distance using Bom-type equation revealed the followings: (1) for Tm³⁺ with coordination number 8, the estimated distance between Tm³⁺ and Cl^– increases linearly withX _s in 0.00X _s0.40. The results mean an increase of the primary solvation sphere size of Tm³⁺ withX _s. (2) For Nd³⁺, the distance between Nd³⁺ and Cl^– decreases linearly withX _s in 0.00X _s<0.13, where both coordination numbers of 9 and 8 coexist, while it increases withX _s in 0.13<X _s0.40. The results mean a decrease of the primary solvation-sphere size of Nd³⁺ withX _s in 0.00X _s<0.13 and an increase of that withX _s in 0.13<X _s0.40.     

Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

Study of Complex Formation between N-Phenylaza-15-Crown-5 with Mg2+, Ca2+, Ag+ and Cd2+ Metal Cations in Some Binary Mixed Aqueous and Non-aqueous Solvents using the Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ metal cations with N-phenylaza-15-crown-5 (Ph-N15C5) were studied in acetonitrile (AN)–methanol (MeOH), methanol (MeOH)–water (H₂O) and propanol (PrOH)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stochiometry of all of the complexes with Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ cations is 1:1 (L:M). The stability of the complexes is sensitive to the solvent composition and a non-linear behaviour was observed for variation of log K _f of the complexes versus the composition of the binary mixed solvents. The selectivity order of Ph-N15C5 for the metal cations in neat MeOH is Ag⁺>Cd²⁺>Ca²⁺>Mg²⁺, but in the case of neat AN is Ca²⁺>Cd²⁺>Mg²⁺>Ag⁺. The values of thermodynamic parameters (ΔH _c ^o , ΔS _c ^o ) for formation of Ph-N15C5–Mg²⁺, Ph-N15C5–Ca²⁺, Ph-N15C5–Ag⁺ and Ph-N15C5–Cd²⁺ complexes were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.