Photosystem I patterning imaged by scanning electrochemical microscopy

We report the first directed adsorption of Photosystem I (PSI) on patterned surfaces containing discrete regions of methyl- and hydroxyl-terminated self-assembled monolayers (SAMs) on gold. SAM and PSI patterns are characterized by scanning electrochemical microscopy (SECM). The insulating protein complex layer blocks the electron transfer of the SECM mediator, thereby reducing the electrochemical current significantly. Uniformly and densely packed adsorbed protein layers are observed with SECM. Pattern images correlate with our previous studies where we showed that low-energy surfaces (e.g., CH3-terminated) inhibit PSI adsorption in the presence of Triton X-100, whereas high-energy surfaces (e.g., OH-terminated) enable adsorption. Therefore, a SAM pattern with alternating methyl and hydroxyl surface regions allows PSI adsorption only on the hydroxyl surface, and this is demonstrated in the resulting SECM images.     

Wetting and adsorption: I. The structure of adsorbed layer of nonionic surfactants at SiO2/water and SiO2/cyclohexane interface

Based on the adsorption of Triton X-100 on silica/water and silica/cyclohexane interfaces and the adsorption of Triton X-305 on silica/water interface, two adsorption models have been proposed. On silica/cyclohexane interface, the adsorption of Triton X-100 is monomolecular layer. The molecules in the monolayer are presumed to be attached to the silica surface by their EO chain such that their hydrocarbon chain are exposed to the cyclohexane phase. On silica/water interface, the adsorption of Triton X-100 or Triton X-305 is bimolecular layer. The surfactant molecules orientated in the first layer are similar with that on the silica/cyclohexane interface. The molecules in the second layer are postulated to adsorb on those of the first in the opposite orientation, with EO chain directed toward the adsorption medium. The contact angle of quartz-water-cyclohexane (θ_W) as a function of the concentration of Triton X-100 and Triton X-305 in water has been measured with quartz plate employing the captive drop (cyclohexane) technique. The observed θ_W (measured through water) rose from < 10° to a maximum of about 120° for Triton X-100 and of about 40° for Triton X-305 as the concentration of surfactant in water increased, and then fell, as the concentration increased further. The results are consistent with the proposed adsorption models.     

Tensammetry with accumulation on the hanging mercury drop electrode : Part 3. The behaviour of triton X-100 in mixtures with PEG-9000

The behaviour of Triton X-100, which can be present in monomeric or associated form, and its mixtures with PEG-9000, which does not undergo association, is described. The tensammetric curve of Triton X-100 alone shows one or two peaks at negative potentials, depending on the concentration of Triton X-100, i.e., on the presence of associated forms. For <2 mg l^?1, there is one broad peak, related to monomers of Triton X-100. The calibration plot for this peak is sigmoidal but its rising section (0.05–0.20 mg l^?1) is approximately linear. The calibration curve of the second, much narrower, peak related to associated forms of Triton X-100, grows parabolically with increasing concentration of Triton X-100. The behaviour of a mixture of PEG-9000 with a larger amount of Triton X-100 is similar to the behaviour of a model mixture of components with sufficiently different properties (e.g., PEG 1500/PEG 9000). The peak for PEG-9000, the stronger surfactant, is relatively less affected by a large amount of Triton X-100. Even this effect can be decreased by using a suitable preconcentration potential (?1.45 V vs. SCE) so that PEG-9000 can be determined in the presence of a 1000-fold amount of Triton X-100. Both peaks of Triton X-100 are greatly decreased by the presence of PEG-9000 and the broad peak can be completely suppressed. Triton X-100 cannot be determined accurately in the presence of unknown amounts of PEG-9000.     

A SPR and AFM study of the effect of surface heterogeneity on adsorption of proteins

The effect of chemical heterogeneity of surfaces on the adsorption of proteins was investigated using model surfaces prepared by self-assembly of omega-functionalized alkanethiols on gold substrates. Surface plasmon resonance was used to monitor the adsorption kinetics of bovine serum albumin (BSA) and the morphology of the adsorbed BSA was imaged with tapping mode atomic force microscopy. The experiments show that the morphology of the adsorbed protein layer was altered significantly only when the surface heterogeneity was distributed in a patchwise manner on a nanometer length scale, which is commensurate with the dimension of the protein. In contrast to linear flexible polymers where the initial adsorption rate remained unchanged upon introduction of the chemical heterogeneity, the initial rate for the globular protein changed from the value observed on homogeneous surfaces and was dependent on the heterogeneous distribution of the chemical sites.     

Wetting of Solids by Aqueous Solutions of Surfactant Binary Mixtures: 1. Wetting of Low-Energy Surfaces

Wetting of low-energy surfaces (polymers, hydrophobized glass) by the aqueous solutions of binary mixtures of nonionic (Triton X-100) and cationic (cetyltrimethylammonium bromide) surfactants at the molar fraction of cationic surfactant = 0.2, 0.5, and 0.8 was studied in the wide concentration range. It was shown that the contact angles of mixed solutions at low-energy surfaces could be predicted on the basis of surface tension isotherms. Concentration ranges of wetting synergism were determined.     

Effects of ionic strength and surface charge on protein adsorption at PEGylated surfaces

PEGylated Nb2O5 surfaces were obtained by the adsorption of poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) copolymers, allowing control of the PEG surface density, as well as the surface charge. PEG (MW 2 kDa) surface densities between 0 and 0.5 nm(-2) were obtained by changing the PEG to lysine-mer ratio in the PLL-g-PEG polymer, resulting in net positive, negative and neutral surfaces. Colloid probe atomic force microscopy (AFM) was used to characterize the interfacial forces associated with the different surfaces. The AFM force analysis revealed interplay between electrical double layer and steric interactions, thus providing information on the surface charge and on the PEG layer thickness as a function of copolymer architecture. Adsorption of the model proteins lysozyme, alpha-lactalbumin, and myoglobin onto the various PEGylated surfaces was performed to investigate the effect of protein charge. In addition, adsorption experiments were performed over a range of ionic strengths, to study the role of electrostatic forces between surface charges and proteins acting through the PEG layer. The adsorbed mass of protein, measured by optical waveguide lightmode spectroscopy (OWLS), was shown to depend on a combination of surface charge, protein charge, PEG thickness, and grafting density. At high grafting density and high ionic strength, the steric barrier properties of PEG determine the net interfacial force. At low ionic strength, however, the electrical double layer thickness exceeds the thickness of the PEG layer, and surface charges "shining through" the PEG layer contribute to protein interactions with PLL-g-PEG coated surfaces. The combination of AFM surface force measurements and protein adsorption experiments provides insights into the interfacial forces associated with various PEGylated surfaces and the mechanisms of protein resistance.     

非离子表面活性剂对多壁碳纳米管在乙醇中高浓度分散的作用

如果能在无需聚合物或共价官能团辅助的条件下, 将多壁碳纳米管(MWNTs)高浓度地分散在乙醇中, 那么向各种复合材料引入MWNTs的过程就会更加便捷. 为此, 制备了多种含有表面活性剂的多壁碳纳米管乙醇悬浮液并对比考查了它们的稳定性. 非离子表面活性剂Triton X-100 和Tween 65显示出了在乙醇中分散悬浮高浓度MWNTs的能力, 能够使1.0 g·L-1 MWNTs乙醇悬浮液的上层清液经240 h后浓度仍分别在0.50和0.35 g·L-1以上. 这样长时间稳定的、没有聚合物或共价官能团辅助的MWNTs乙醇悬浮液, 其浓度比文献报道的值高. 进一步探讨了这些非离子表面活性剂分子结构对于分散MWNTs的优势, 并直观给出了其吸附于碳纳米管表面的可能形式. X射线光电子能谱和透射电子显微镜的表征结果都证实了表面活性剂分子吸附于碳纳米管表面.     

Adsorption Kinetics of Some Polyethylene Glycol Octylphenyl Ethers Studied by the Fast Formed Drop Technique

The adsorption kinetics of Triton X-100 and Triton X-405 at solution/air and solution/hexane interfaces is studied by the recently developed fast formed drop technique. The dynamic interfacial tension of Triton X-100 and Triton X-405 solutions against hexane has been measured without preequilibration of the water and oil phases. It is found that the dynamic interfacial tension of Triton X-100 solutions passes through a minimum. This strange behavior is attributed to partial solubility of the surfactant in hexane. Such minima of the dynamic interfacial tension of Triton X-405 solutions have not been observed, which correlates well with the solubilities of both surfactants in hexane reported in the literature. The dynamic surface tension of solutions of both surfactants and the dynamic interfacial tension of Triton X-405 solutions are interpreted by the Ward and Tordai model for diffusion controlled adsorption. It is shown that proper interpretation of the experimental data depends on the type of isotherm used. More consistent results are obtained when the Temkin isotherm is used instead of the Langmuir isotherm. The results obtained with Triton X-100 at the solution/air interface confirm that the adsorption of this surfactant occurs under diffusion control. The adsorption of Triton X-405 at solution/air and at solution/hexane interfaces seems to occur under diffusion control at short periods of time, but under mixed (diffusion-kinetic) control at long periods of time. A hypothesis is drawn to explain this phenomenon by changes in the shape of the large hydrophilic heads of Triton X-405 molecules. Copyright 2000 Academic Press.     

Displacement of hexanol by the hexanoic acid overoxidation product in alcohol oxidation on a model supported palladium nanoparticle catalyst

This work characterizes the adsorption, structure, and binding mechanism of oxygenated organic species from cyclohexane solution at the liquid/solid interface of optically flat alumina-supported palladium nanoparticle surfaces prepared by atomic layer deposition (ALD). The surface-specific nonlinear optical vibrational spectroscopy, sum-frequency generation (SFG), was used as a probe for adsorption and interfacial molecular structure. 1-Hexanoic acid is an overoxidation product and possible catalyst poison for the aerobic heterogeneous oxidation of 1-hexanol at the liquid/solid interface of Pd/Al(2)O(3) catalysts. Single component and competitive adsorption experiments show that 1-hexanoic acid adsorbs to both ALD-prepared alumina surfaces and alumina surfaces with palladium nanoparticles, that were also prepared by ALD, more strongly than does 1-hexanol. Furthermore, 1-hexanoic acid adsorbs with conformational order on ALD-prepared alumina surfaces, but on surfaces with palladium particles the adsorbates exhibit relative disorder at low surface coverage and become more ordered, on average, at higher surface coverage. Although significant differences in binding constant were not observed between surfaces with and without palladium nanoparticles, the palladium particles play an apparent role in controlling adsorbate structures. The disordered adsorption of 1-hexanoic acid most likely occurs on the alumina support, and probably results from modification of binding sites on the alumina, adjacent to the particles. In addition to providing insight on the possibility of catalyst poisoning by the overoxidation product and characterizing changes in its structure that result in only small adsorption energy changes, this work represents a step toward using surface science techniques that bridge the complexity gap between fundamental studies and realistic catalyst models.     

溶菌酶蛋白在聚合物防污膜表面的吸附

采用分子动力学模拟方法比较了溶菌酶蛋白在两种典型聚合物防污材料聚乙二醇(PEG)和聚二甲基硅氧烷(PDMS)表面的吸附行为, 在微观上探讨了聚合物膜表面性质对蛋白质吸附的影响. 根据蛋白质与聚合物膜之间的相互作用、能量变化及表面水化层分子的动力学行为, 解释了PEG防污涂层相对于PDMS表面具有更佳防污效果的原因: (1) 相比PDMS涂层, 蛋白质与PEG涂层的结合能量较低, 使其结合更加疏松; (2) 蛋白质吸附到材料表面要克服表面水化层分子引起的能障, PEG表面与水分子之间结合紧密, 结合水难于脱附, 造成蛋白质在其表面的吸附需要克服更高的能量, 不利于蛋白质的吸附.     

Adsorption kinetics of octylphenyl ethers of poly(ethylene glycol)s on the solution—air interface

We studied the dynamic surface tension of aqueous solutions of Triton X-100 and Triton X-405 by the maximum bubble pressure and the inclined plate methods in the lifetime range from 0.001 s up to 10 s. It is established that in the region of large and ultimately small surface pressure and time the adsorption follows diffusion kinetics, but in the region of intermediate values of lifetime and surface pressure both the surfactants decrease the surface tension faster than predicted by the existing diffusion theory. We offer a model that provides for the ability of poly(ethylene glycol) chains to adsorb on the water-air interface and to change the area that a molecule occupies on the surface. For this model we achieve full coincidence of the measured values and the values calculated according to the diffusion theory of the dynamic surface tension.

It is ascertained that the Triton X-405 molecule can exist in the surface layer in different states: with the poly(ethylene glycol) chain fully expanded or with it partially or fully submerged in solution. The first state is most probable at surface pressures less than 5 mN m⁻¹, and the second is probable at a pressure of about 8–10 mN m⁻¹. At pressures larger than 15–20 mN m⁻¹, the poly(ethylene glycol) chain is fully submerged in the solution. The Triton X-100 molecule can also expand its poly(ethylene glycol) chain at low pressures and fully submerges it in the solution at higher values of the surface pressure.     

溶菌酶蛋白在聚合物防污膜表面的吸附

采用分子动力学模拟方法比较了溶菌酶蛋白在两种典型聚合物防污材料聚乙二醇(PEG)和聚二甲基硅氧烷(PDMS)表面的吸附行为,在微观上探讨了聚合物膜表面性质对蛋白质吸附的影响.根据蛋白质与聚合物膜之间的相互作用、能量变化及表面水化层分子的动力学行为,解释了PEG防污涂层相对于PDMS表面具有更佳防污效果的原因:(1)相比PDMS涂层,蛋白质与PEG涂层的结合能量较低,使其结合更加疏松;(2)蛋白质吸附到材料表面要克服表面水化层分子引起的能障,PEG表面与水分子之间结合紧密,结合水难于脱附,造成蛋白质在其表面的吸附需要克服更高的能量,不利于蛋白质的吸附.     

Entrapment of photosystem I within self-assembled films

We have developed a process to incorporate an integral membrane protein, Photosystem I (PSI), into an organic thin film at an electrode surface and thereby insulate the protein complex on the surface while mimicking its natural environment. The PSI complex, which is primarily more hydrophobic on the exterior than interior, is hydrophobically confined in vivo within the thylakoid membrane. To mimic the thylakoid membrane and entrap PSI on an electrode, we have designed a series of steps using a thin self-assembled monolayer (SAM) to adsorb and orient PSI followed by exposures to longer-chained methyl-terminated alkanethiols that place exchange with components of the original SAM in the interprotein domains. In this process, PSI is first adsorbed onto a HOC(6)S/Au substrate through a short exposure to a dilute solution of the protein to achieve a protein coverage of approximately 25%. The PSI/HOC(6)S/Au substrate is then placed into a solution containing one of various longer-chained alkanethiols including C(22)SH or C(18)OC(19)SH. Changes in thickness, interfacial capacitance, infrared spectra, and surface wettability were used to assess the extent of backfilling by the long-chained thiols. The coverage of the protein layer and the solvent used for backfilling affected the rate and quality of the SAM formed in the interprotein regions. After exposure of the PSI layer to solvents containing alkanethiols, there was only minor loss of protein on the surface and no real change in protein secondary structure as evidenced by reflectance absorption infrared spectroscopy.     

The zeta potential of kaolin suspensions measured by electrophoresis and electroacoustics

The zeta potentials of kaolin dilute and concentrated suspensions were monitored using the techniques of electrophoresis and electroacoustics, respectively. The effect of addition of salt (KCl), a polymer material (Triton X-100), and an anionic surfactant (sodium dodecyl sulphate, SDS) on the suspension properties was investigated by electrophoresis. Electroacoustics was employed for the measurement of zeta potentials for the highest possible kaolin content in suspension and the effect of dilution. The effect of aging of a freshly prepared sample and kaolin isoelectric point was also studied. Using both techniques it was noted that there was no isoelectric point, just a maximum value in the magnitude of the kaolin suspension zeta potential. These maxima were observed also in the presence of Triton X-100 and SDS. An increase of the concentration of KCl and SDS in suspension shifted the maxima towards more acidic values, while in the presence of Triton X-100 the position of the zeta potential maxima remained constant. Electroacoustic techniques revealed that a freshly prepared concentrated suspension requires about six hours to equilibrate to achieve a steady zeta potential. Diluting the concentrated suspensions led to decrease of the zeta potential as ions bound to the surface desorbed and screened the surface charge. The zeta potential maxima remained unchanged even after heating the powder in an oven at 200°C (to remove any organic material) thereby suggesting that the most likely explanation for the maxima is isomorphic substitution.     

Dynamic Interfacial Tension of Surfactant Mixtures at Liquid-Liquid Interfaces

Dynamic interfacial tensions for surfactant mixtures at liquid-liquid interfaces were obtained with a drop volume tensiometer. The surfactants tested were Triton X-100, palmitic acid, and Span 80 at both the water-hexadecane and water-mineral oil interfaces. Two-surfactant mixtures were examined with the surfactants initially dissolved in different phases to minimize bulk-phase interactions. For concentrations below the CMC, it was found that the adsorption kinetics of palmitic acid and Triton X-100 mixtures were dominated by the latter surfactant. Apparent diffusion coefficients were obtained for Triton X-100 both in the absence and in the presence of palmitic acid. These values were largely insensitive to the presence of palmitic acid. For mixtures of Span 80 and Triton X-100, the adsorption kinetics were found to be influenced significantly by both surfactants. In this case, relative changes in surfactant concentrations affected the dynamic interfacial tension of the mixed system. A previously proposed multicomponent adsorption model described the dynamic interfacial tension adequately at low concentrations of Triton X-100, when desorption could be neglected. At higher concentrations, modifications were needed to account for solubilization into the oil phase. These corrections allowed the model to describe the long time adsorption quite well. However, predicted values of short time interfacial tensions were overestimated, likely due to a synergistic interaction of the two surfactants. Copyright 1999 Academic Press.     

Wetting and adsorption: II. Adsorption of Triton X-100 and Triton X-305 onto carbon black from water and cyclohexane solutions

The adsorption isotherms of nonionic surfactants Triton X-100 and Triton X-305 from water and cyclohexane on carbon black have been determined at 15 and 30°C. The Langmuir-type and BET-type isotherms are obtained for adsorption of Triton X-100 and Triton X-305 from water and cyclohexane respectively. Both the contact angles of water for graphite/water/air and graphite/water/cyclohexane decrease monotonously with increasing surfactant concentration. From these results, it is proposed that the adsorption of Triton X-100 and Triton X-305 on carbon black or graphite from water is monolayer. For the adsorption from cyclohexane solutions, the ethyleneoxide group of the surfactant molecules may be adsorbed onto the polar spot at the surface of carbon black, and the hydrophobic group of adsorbed molecules may direct toward the liquid phase or attaches to the nonpolar surface region around the polar spot. As the concentration increases, the ethylene oxide groups of the adsorbed molecules can be aggregated with each other via polar interactions to form hemi-reversed micelle.     

Effect of chain density and conformation on protein adsorption at PEG-grafted polyurethane surfaces

Polyurethanes were modified using monobenzyloxy polyethylene glycol (BPEG) which possesses a bulky hydrophobic benzyloxy group at one end and a hydroxyl group at the other end as a preconstructed BPEG layer, and poly(ethylene glycol) (PEG) and monomethoxyl poly(ethylene glycol) (MPEG) with various chain lengths as fillers. Our objective was to investigate the effect of PEG graft density and conformation on protein adsorption at PEGlated surface. The graft density was estimated by a chemical titration method. The combination of ATR-FTIR, AFM and titration results provide evidences that the graft density can be increased by backfilling PEG or MPEG to a BPEG layer. However, fibrinogen and albumin adsorption significantly increased on all surfaces after PEG or MPEG backfilling. We conclude that the conformation of hydrophobic benzyloxy end groups of the BPEG layer plays a key role. The benzyloxy end groups of preconstructed PEG chains stretch to the surface after PEG backfilling, which possibly accounts for the observed increase in protein adsorption. The BPEG conformation change after backfilling with PEG or MPEG was also suggested by contact angles. Additionally, protein adsorption was slightly influenced by the length of filler, suggesting a change in surface morphology.     

Surface Property of Nonionic Surfactant Triton X-100 in an Ionic Liquid

A common nonionic surfactant Triton X-100 was dissolved in a commercial ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF₄). The surface tension of the bmimBF₄ solution was decreased with increasing the content of surfactant Triton X-100, a similar phenomenon with aqueous solution systems. Dynamic surface properties of Triton X-100 in bmimBF₄ were measured. It was found that pure IL solvents need rearrangement at the air-bmimBF₄ interface during the beginning stage of absorption. Moreover, the adsorption model was found to be in accord with the diffusion-controlled adsorption mechanism, and further, the dilute bmimBF₄ solutions are close to the diffusion-controlled adsorption.     

Effect of nonionic surfactant on wetting behavior of an evaporating drop under a reduced pressure environment

The evaporation of sessile drops at reduced pressure is investigated. The evaporation of water droplets on aluminum and PTFE surfaces at reduced pressure was compared. It was found that water droplets on an aluminum surface exhibit a 'depinning jump' at subatmospheric pressures. This is when a pinned droplet suddenly depins, with an increase in contact angle and a simultaneous decrease in the base width. The evaporation of sessile water droplets with a nonionic surfactant (Triton X-100) added to an aluminum surface was then studied. The initial contact angle exhibited a minimum at 0.001 wt% Triton X-100. A maximum in the evaporation rate was also observed at the same concentration. Droplets with low surfactant concentrations are found to exhibit the 'depinning jump.' It is thought that the local concentration of the surfactant causes a gradient of surface tension. The balance at the contact angle is dictated by complex phenomena, including surfactant diffusion and adsorption processes at interfaces. Due to the strong evaporation near the triple line, an accumulation of the surfactant will lead to a surface tension gradient along the interface. The gradient of surface tension will influence the wetting behavior (Marangoni effect). At low surfactant concentrations the contact line depins under the strong effect of surface tension gradient that develops spontaneously over the droplet interface due to surfactant accumulation near the triple line. The maximum evaporation rate corresponds to a minimum contact angle for a pinned droplet.     

Protein resistance of titanium oxide surfaces modified by biologically inspired mPEG-DOPA

In the present study, we have utilized X-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (ELM), and optical waveguide lightmode spectroscopy (OWLS) to examine the surface adsorption and protein resistance behavior of bio-inspired polymers consisting of poly(ethylene glycol) (PEG) conjugated to peptide mimics of mussel adhesive proteins. Peptides containing up to three residues of 3,4-dihydroxyphenylalanine (DOPA), a key component of mussel adhesive proteins, were conjugated to monomethoxy-terminated PEG polymers. These mPEG-DOPA polymers were found to be highly adhesive to TiO2 surfaces, with quantitative XPS analysis providing useful insight into the binding mechanism. Additionally, the antifouling properties of immobilized PEG were reflected in the excellent resistance of mPEG-DOPA-modified TiO2 surfaces to protein adsorption. Measurements of mPEG-DOPA and human serum adsorption were related in terms of ethylene glycol (EG) surface density and serum mass adsorbed and demonstrated a threshold of approximately 15-20 EG/nm2, above which substantially little protein adsorbs. With respect to surface density of adsorbed PEG and the associated nonfouling behavior of the adlayers, strong parallels exist between the nonfouling properties of the surface-bound mPEG-DOPA polymers and PEG polymers immobilized to surfaces using other approaches. Peptide anchors containing three DOPA residues resulted in PEG surface densities higher than those achieved using several existing PEG immobilization strategies, suggesting that peptide mimics of mussel adhesive proteins may be useful for achieving high densities of protein-resistant polymers on surfaces.