Étude du comportement d'une fissure humide soumise à une élévation de température

We have been interested in the role of water inside a material crack, during heating. We have established an original analytical solution giving, the liquid–vapour repartition in the crack and the crack tip stress intensity factor, as functions of crack's length, water molecules contained in the inner of the crack and temperature. Then, we are able to study the crack stability.     

Sur la nature de la transition à l'instationnaire d'un écoulement de convection naturelle en cavité différentiellement chauffée à grands écarts de température

Natural convection of air inside a rectangular cavity, differentially heated under large temperature gradients, is considered. The low Mach approximation equations are those obtained by Paolucci allowing for filtering of sound waves. Transition to unsteadiness is studied with numerical simulation, with a finite volume code based on a fractional time step method derived from projection methods used for incompressible flows. When the fluid physical properties are prescribed constants, transition to unsteadiness follows the classical scheme of a Hopf bifurcation. The transition is quite different when viscosity obeys Sutherland's law while the Prandtl number is kept constant. There is evidence of hysteresis, therefore the transition seems to be subcritical. In the vicinity of the transition, on the large amplitude branch, an intermittent solution is observed, with periodic bursts separating quasi-steady states.     

Majoration des tensions dans un corps élastique à l'aide des déplacements superficiels

Sans résumé Mémoire présenté par G. Fichera Cet ouvrage a été accompli durant que l'auteur jouissait d'une bourse de l'Institut National de Mathématique Supérieure de Rome.     

Un résultat d'absence de valeurs propres plongées pour le guide topographique élastique

In this work, we prove a nonexistence result about embedded eigenvalues for the elastic topographical waveguide. We give an answer to a question raised by Bonnet-Bendhia et al. (1999).     

Modélisation de l'effet de portance dans un écoulement à bulles

We propose here a lift coefficient modeling in a turbulent bubbly boundary layer under the assumption of bidimensional stationary and vertical upward fully developed flow. The basic frame of this approach is to consider that the volumetric flux of bubbles is composed of the convective flux by the liquid, the contribution by the gravitational field and those of the lift force and the bubble dispersion terms. A discussion of results completes this study.     

Extension de la DRBEM à la propagation guidée en écoulement cisaillé

The present study aims to extend the Dual Reciprocity Boundary Element Method in order to solve acoustic wave propagation equations in the frequency domain for a parallel shear flow. The Linearized Euler Equations are written as a coupled pair of equations, which are second-order in terms of acoustic pressure and first-order in terms of normal acoustic velocity. Good agreement between numerical results and analytical solutions for a low Mach number shear flow (M<0.1) shows the interest of the method.     

Modélisation du comportement thermique d'un outil de fraisage : approche par identification de système non entier

In this work we present an experimental apparatus devoted to the thermal characterisation of a milling tool. The experimental device used thermistors, one for each insert. Each thermistor is located at a point in the tool close to the tip of the insert. The heat flux in each insert is expressed according to the temperature at the sensor from a non-integer model. The parameters of the model are identified from transient evolutions measurements of the temperature on the sensor and on the cutting edge. An application shows the difference in the behaviour of each insert during machining from the estimated heat fluxes. To cite this article: J.-L. Battaglia et al., C. R. Mecanique 330 (2002) 857–864.     

Inductions électromagnétiques en relativité générale et principe de Fermat

Sans résumé Mémoire transmis par A. Lichnerowicz     

Interprétation géométrique de la décomposition des équations de compatibilité en grandes déformations

In this paper, we establish compatibility equations satisfied by the right Cauchy–Green stress tensor by annihiling the associated curvature and torsion. The cancelation of torsion, using variables introduced by the polar decomposition, is not trivial as is usually the case. This point is the key to the decomposition of compatibility conditions in two first-order EDPs.     

Un opérateur de diffusion spatialement sélectif pour le transport d'un traceur passif ou actif par un écoulement de grande échelle

In a fluid flow, fields are measurable up to a cut-off scale at which they are regularized. We show that, for a smooth velocity field, this regularization adds to the advection equation a diffusive term proportional to the strain tensor. We study in two dimensions its effect on the dynamics of velocity and vorticity, and on the conservation of quadratic invariants. Vorticity and energy are still conserved, while enstrophy and tracer variance are dissipated depending on the flow topology. These properties (conservation, dissipation, spatial selectivity) suggest the use of this selective strain–diffusion operator for numerical simulations of inhomogeneous flows in the quasi-two-dimensional approximation.     

Caractéristiques rhéologiques,coéfficient de frottement et écoulement en situation réelle de fluides à seuil

Résumé Ce travail porte sur l'étude de solutions diluées d'un polymère de l'acide acrylique dans l'eau (concentration en poids 0,1%). Ce fluide présente des effets de seuil. La mesure du champ de vitesse par vélocimétrie laser permet une détermination précise de l'indice rhéologique,n, étant un paramètre essentiel de la loi de comportement proposée: . Les autres constantes peuvent être déduites d'essais rhéologiques classiques, à fort taux de cisaillement. Il est possible de corriger le gradient de pression mesuréP/L, afin d'obtenir la valeur véritable de ce gradient, notéedp/dz. L'analyse de l'écoulement dans un élargissement brusque montre que le seuil a une forte influence sur les zones de recirculation.

---

This work deals with the study of very dilute solutions of polyacrylic acid in water (weight concentration about 0.1%). These fluids seem to exhibit a yield effect. The determination of the fully developed velocity field by laser velocimetry allows us an accurate determination of the rheological indexn which is an essential parameter for the proposed rheological relationship: . Other constants can be determined from classical rheological experiments (high shear strain). It is possible to correct the experimental pressure gradientP/L so as to get the real value, noted asdp/dz. An analysis of the flow in an abrupt expansion shows that the yield effect strongly influences the recirculation zones.

---

D, d m diamètre intérieur d'une conduite cylindrique - C % concentration en poids - _s Pa seuil de contrainte - K consistance - gradient de vitesse axiale - gradient pariétal de vitesse axiale - Pa s viscosité pour - Pa contrainte de cisaillement - m/s vitesse débitante - n indice de structure - dp/dz Pa/m gradient longitudinal de pression - z m abscisse longitudinale - u m/s vitesse axiale - écart entre le gradient de pression effectif et le gradient mesuré en Pa - P Pa différence de pression mesurée - L m distance entre 2 prises de pression - A Pa constante intervenant dans l'expression de - B 10^–3 Pa s constante intervenant dans l'expression de     

Méthode couplée CVFE/BE pour les calculs acoustiques en domaine non borné

A new method based on the flux conservation for acoustic computations in unbounded domain is presented. The domain is divided in outer and inner regions by a fictitious boundary. The inner problem is solved by a control volume finite element method while the outer flow is treated with a boundary element method. The coupling of the two sub-domains is performed using an appropriate expression for the outgoing fluxes satisfying the Sommerfeld condition. A two-dimensional configuration with a circular interface is considered to show that the method is effective. Results of this method are compared to an analytical solution and to results from the literature.     

Étude expérimentale et numérique de la convection thermomagnétique dans un fluide non électroconducteur

We present an experimental and numerical study of convection driven by a central heat source in a vertical and cylindrical cavity with a higth aspect ration, filled by air and submitted to the action of non homogeneous intence magnetic field. We show how the magnetization force applying on oxygene is able to intensify, reduce, stop or even reverse the natural convection fluid flow.     

Extension du modèle d'échelles mixtes à la diffusivité de sous-maille

In the large-eddy simulation frame for non-isothermal turbulent flow, the Mixed Scale Model is extended to the subgrid diffusivity, in order to dissociate the computation of subgrid viscosity and diffusivity. The identification of the subgrid thermal dissipation term in the subgrid flux transport equation leads to an algebraic expression of the subgrid diffusivity. This diffusive model, as the Smagorinsky one, is weighted by a model based on scale similarity. This expression leads to satisfactory results when applied to a buoyant turbulent flow in a differentially heated cavity.     

Homogénéisation d'équations et d'inéquations à paramètres oscillants. Application à l'étude d'écoulement de faible épaisseur en régime transitoire

Double scale homogenization is used to average stationary equation or inequalities in which both highly oscillating variables and parameters appear. We demonstrate how the limit is obtained using a two-stage procedure , firstly by carrying out a classical homogenization process by freezing the oscillating parameter, then by averaging the result with respect to this parameter. These results allow us to average the pressure for a newtonian fluid in a narrow gap between two rough unstationnary surfaces.     

Inversion d'un écoulement plan de Stokes – application à l'écoulement à débit moyen nul entre deux plans parallèles

We present the interest and some characteristics of the inverse transformation of a 2D Stokes flow. This method is applied to the cellular flow between two parallel plates induced by a rotating cylinder to obtain the flow around two circular cylinders in contact placed in the centre of a rotating circular cylinder.