Biodegradation of polyhydroxyalkanoates (PHAs) in tropical coastal waters and identification of PHA-degrading bacteria

Biodegradability patterns of two PHAs: a polymer of 3-hydroxybutyric acid (3-PHB) and a copolymer of 3-hydroxybutyric and 3-hydroxyvaleric acids (3-PHB/3-PHV) containing 11 mol% of hydroxyvalerate, were studied in the tropical marine environment, in the South China Sea (Nha Trang, Vietnam). No significant differences have been observed between degradation rates of 3-PHB and 3-PHB/3-PHV specimens; it has been found that under study conditions, biodegradation is rather influenced by the shape of the polymer item and the preparation technique than by the chemical composition of the polymer. Biodegradation rates of polymer films in seawater have been found to be higher than those of compacted pellets. As 3-PHB and 3-PHB/3-PHV are degraded and the specimens lose their mass, molecular weight of both polymers is decreased, i.e. polymer chains get destroyed. The polydispersity index of the PHAs grows significantly. However, the degree of crystallinity of both PHAs remains unchanged, i.e. the amorphous phase and the crystalline one are equally disintegrated. PHA-degrading microorganisms were isolated using the clear-zone technique, by inoculating the isolates onto mineral agar that contained PHA as sole carbon source. Based on the 16S rRNA analysis, the PHA-degrading strains were identified as Enterobacter sp. (four strains), Bacillus sp. and Gracilibacillus sp.     

Purification and Properties of an Extracellular Polyhydroxybutyrate Depolymerase from Pseudomonas mendocina DSWY0601

An extracellular polyhydroxybutyrate(PHB) depolymerase was purified to homogeneity from the culture supernatant of a PHB-degrading bacterium, Pseudomonas mendocina DSWY0601, which was isolated from brewery sewage for the ability to form clear zones on the PHB mineral agar plates. The molecular weight of the purified PHB depolymerase as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) was approximately 59800 at the optimal temperature and pH value being 50 ℃ and 8.5, respectively. PHB depolymerase was stable in a temperature range of 20―50 ℃ and sensitive to pH value within a pH range of 8.0―9.5. PHB depolymerase degraded poly-3-hydroxybutyrate-co-4-hydroxybutyrate(P3/4HB) and poly-3-hydroxybutyrate-co-3- hydroxyvalerate(PHBV) but did not degrade poly(lactic acid)(PLA), poly(butylene succinate)(PBS) or poly- (caprolactone)(PCL). PHB depolymerase was sensitive to phenylmethylsulfonyl fluoride(PMSF), H₂O₂ and SDS. The main product after enzymatic degradation of PHB was indentified as 3-hydroxbutyrate monomer(3HB) by mass spectrometric analysis, suggesting that PHB depolymerase acted as an exo-type hydrolase. Analysis of phaZ_pm gene reveals that PHB depolymerase is a typical denatured short-chain-length PHA(dPHA_SCL, PHA=polyhydroxyalkanoate) depolymerase containing catalytic domain, linker and substrate-binding domain.     

Study of enzymatic degradation of microbial copolyesters consisting of 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoates

Enzymatic degradation of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) (PHBA) biopolyester consisting of 3-hydroxybutyrate (HB) and 15 mol% medium-chain-length 3-hydroxyalkanoates (HA) was studied using a polyhydroxyalkanoates (PHA) depolymerase produced by Ralstonia pickettii T1. It was found that PHBA films did not lose their weight after 25 h of depolymerase treatment. In contrast, three commercially available PHAs including poly-3-hydroxybutyrate (PHB), poly(3-hydroxybutyrate-19 mol% 3-hydroxyvalerate) (PHBV) and poly(3-hydroxybutyrate-19 mol% 3-hydroxyhexanoate) (PHBHHx) lost 75%, 94% and 39% of their original weights. Slow degradation of PHBA was also confirmed by the absence of HA monomers, dimers or trimers as degradation products in their depolymerase solution compared with abundance of degradation products released by the other three PHAs under the same condition. Surface erosion of PHBA was only observed after 48 h of enzymatic treatment compared with those of PHB, PHBV and PHBHHx which already had obvious surface changes after 7.5 h of same treatment. Although the crystallinities of PHB, PHBV, PHBHHx and PHBA were in the order PHB > PHBV > PHBHHx > PHBA valued at 55.8%, 47.8%, 45.9% and 40.9%, respectively, the order of degradability was PHBV > PHB > PHBHHx > PHBA. It can be proposed that PHA enzymatic degradation using this depolymerase was structure related: longer side-chain PHA including PHBHHx and PHBA was less favorable for the depolymerase degradation, longer the side chain, less the biodegradation.     

Mass spectrometry feedback control for synthesis of polyhydroxyalkanoate granule microstructures in Ralstonia eutropha

Polyhydroxyalkanoate (PHA) granules with core-shell layered microstructure were synthesized in Ralstonia eutropha using periodic feeding of valeric acid into a growth medium containing excess fructose. The O2 consumption and CO2 evolution rates, determined by off-gas mass spectrometry, have been used as sensitive measures to indicate the type of nutrients utilized by R. eutropha during PHA synthesis. Domains of poly-3-hydroxybutyrate (PHB) were formed during polymer storage conditions when only fructose was present. Feeding of valeric acid (pentanoic acid) resulted in the synthesis of hydroxyvalerate (HV) monomers, forming a poly-3-hydroxybutyrate-co-valerate (PHBV) copolymer. The synthesis of desired polymer microstructures was monitored and controlled using online mass spectrometry (MS). The respiratory quotient (RQ) was unique to the type of polymer being synthesized due to increased O2 consumption during PHBV synthesis. MS data was used as the control signal for nutrient feeding strategies in the bioreactor. The core-shell structures synthesized were verified in cells using transmission electron microscopy after thin sectioning and staining with RuO4. It was demonstrated that the synthesis of core-shell microstructures can be precisely controlled utilizing a MS feedback control system.     

Biomedical Investigations of Biodegradable PHAs

This work is a review of the results of biomedical studies of polymer devices (films, fibers, microparticles, 3D implants) made from resorbable PHAs synthesized by the bacterium Wautersia (Ralstonia) eutropha B5786, using the technology developed at the Institute of Biophysics of the Siberian Branch of the Russian Academy of Sciences. Two types of PHAs – polyhydroxybutyrate (PHB) and a hydroxybutyrate/hydroxyvalerate copolymer (PHB/PHV) – have been proven to be biocompatible in vitro in cultures of fibroblasts, endothelial cells, hepatocytes, and osteoblasts, and in short- and long-duration experiments on animals. Polymer films and membranes have been found to be usable as scaffolds for functioning cells and monofilament suture fibers – for stitching muscular-fascial wounds and in abdominal surgery. Ectopic bone formation assay and experiments with the model of segmental osteotomy showed that 3D PHB and PHB/HA implants can be used for reparative osteogenesis. The paper reports beneficial results of using polymers to repair bone defects in oral surgery.     

Effect of clay organomodifiers on degradation of polyhydroxyalkanoates

Ammonium surfactants are commonly used as clay organomodifiers in nanocomposites. Their effect on the thermal- and thermo-mechanical degradation of polyhydroxyalkanoates (PHAs) is reported. Two poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) grades were tested and compared to polyhydroxybutyrate (PHB). Thermal stabilities were determined from thermogravimetric data and determination of molecular weight changes after processing was performed. The data revealed that all surfactants enhance the PHBV degradation. The results also highlight the preponderant effect of the initial M_w rather than the HV content on the thermal stability. The thermo-mechanical study confirmed the role of surfactants and their different behaviour towards PHBV degradation. This study demonstrates that all surfactants enhance the PHA degradation since their decomposition products most likely act as catalytic agents.     

Production of Polyhydroxyalkanoates (PHAs) by Vibrio alginolyticus Strains Isolated from Salt Fields

Vibrio alginolyticus is a halophilic organism usually found in marine environments. It has attracted attention as an opportunistic pathogen of aquatic animals and humans, but there are very few reports on polyhydroxyalkanoate (PHA) production using V. alginolyticus as the host. In this study, two V. alginolyticus strains, LHF01 and LHF02, isolated from water samples collected from salt fields were found to produce poly(3-hydroxybutyrate) (PHB) from a variety of sugars and organic acids. Glycerol was the best carbon source and yielded the highest PHB titer in both strains. Further optimization of the NaCl concentration and culture temperature improved the PHB titer from 1.87 to 5.08 g/L in V. alginolyticus LHF01. In addition, the use of propionate as a secondary carbon source resulted in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). V. alginolyticus LHF01 may be a promising host for PHA production using cheap waste glycerol from biodiesel refining.     

Effects of different substrate composition on biosynthesis of polyhydroxybutyrate-co-hydroxyvalerate by recombinant Escherichia coli

Cupriavidus necator is well known for its ability to accumulate polyhydroxybutyrate (PHB). When supplemented with propionic acid (or sodium propionate) in the growth medium, the bacterium is also able to synthesize polyhydroxybutyrate-co-hydroxyvalerate (PHBV). In order to increase the fraction of 3-hydroxyvalerate (3HV) in PHBV, we cloned the propionate permease gene prpP from C. necator and the propionyl-CoA synthase gene prpE from Cupriavidus taiwanensis and transformed into an Escherichia coli containing phaCAB operon of C. necator. The effects on PHBV accumulation in cells co-expressed with phaCAB and prpE or prpP in the media contained mixed carbon sources (glucose and sodium propionate) were evaluated. The HV fraction in PHBV increased when prpE or prpP was overexpressed in the cells. Concentrations of yeast extracts could also affect the fraction of HV. In addition, when glucose was replaced by sodium pyruvate, sodium succinate, or sodium gluconate, only PHB were detected in the recombinant strains.     

Polyhydroxyalkanoate (PHA) Biosynthesis from Whey Lactose

Summary: The potential of three different microbial wild type strains as polyhydroxyalkanoate (PHA) producers from whey lactose is compared. Homopolyester and co-polyester biosynthesis was investigated by the archaeon Haloferax mediterranei and the eubacterial strains Pseudomonas hydrogenovora and Hydrogenophaga pseudoflava. H. mediterranei accumulated 50 wt.-% of poly-3-(hydroxybutyrate-co-6%-hydroxyvalerate) in cell dry mass from hydrolyzed whey without addition of 3-hydroxyvalerate (3HV) precursors (specific productivity q_p: 2.9 mg/g h). Using P. hydrogenovora, the final percentage of poly-3-hydroxybutyrate (PHB) amounted to 12 wt.-% (q_p: 0.03 g/g h); co-feeding of valeric acid resulted in the production of 12 wt.-%. P-3(HB-co-21%-HV) (q_p: 0.02 g/g h). With H. pseudoflava, it was possible to reach 40 wt.-% P-3 (HB-co-5%-HV) on not-hydrolyzed whey lactose plus valeric acid as 3HV precursor (q_p: 9.1 mg/g h); on hydrolyzed whey lactose without addition of valeric acid, the strain produced 30 wt.-% of PHB (q_p: 0.16 g/g h). The characterization of the isolated biopolyesters completes the study.     

Degradation of medium-chain-length polyhydroxyalkanoates in tropical forest and mangrove soils

Bacterial polyhydroxyalkanoates (PHAs) are perceived to be a suitable alternative to petrochemical plastics because they have similar material properties, are environmentally degradable, and are produced from renewable resources. In this study, the in situ degradation of medium-chain-length PHA (PHA_MCL) films in tropical forest and mangrove soils was assessed. The PHA_MCL was produced by Pseudomonas putida PGA1 using saponified palm kernel oil (SPKO) as the carbon source. After 112 d of burial, there was 16.7% reduction in gross weight of the films buried in acidic forest soil (FS), 3.0% in the ones buried in alkaline forest soil by the side of a stream (FSst) and 4.5% in those buried in mangrove soil (MS). There was a slight decrease in molecular weight for the films buried in FS but not for the films buried in FSst and in MS. However, no changes were observed for the melting temperature, glass transition temperature, monomer compositions, structure, and functional group analyses of the films from any of the burial sites during the test period. This means that the integral properties of the films were maintained during that period and degradation was by surface erosion. Scanning electron microscopy of the films from the three sites revealed holes on the film surfaces which could be attributed to attack by microorganisms and bigger organisms such as detritivores. For comparison purposes, films of polyhydroxybutyrate (PHB), a short-chain-length PHA, and polyethylene (PE) were buried together with the PHA_MCL films in all three sites. The PHB films disintegrated completely in MS and lost 73.5% of their initial weight in FSst, but only 4.6% in FS suggesting that water movement played a major role in breaking up the brittle PHB films. The PE films did not register any weight loss in any of the test sites.     

Gamma Irradiation Effects on Mechanical and Thermal Properties and Biodegradation of Poly(3-hydroxybutyrate) Based Films

Summary: Their biodegradable properties make polyhydroxyalkanoates (PHAs) ideal candidates for innovative applications. Many studies have been primarily oriented to poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and afterwards to blends of PHAs with synthetic biodegradable polymers, such as poly(ε-caprolactone) (PCL). Medical and pharmaceutical devices require sterilization and γ irradiation could provide a proper alternative since it assures storage stability and microbiological safety. This contribution presents the effect of γ irradiation on the mechanical and thermal properties and on the biodegradation of PHB, PHBV and a commercial PHB/PCL blend. Samples, prepared by compression moulding, were irradiated in air at a constant dose rate of 10 kGy/h, from 10 to 179 kGy. Polymer chain scission was assessed by changes in the molecular weight, thermal properties and tensile behaviour. The correlation between absorbed dose and changes in the mechanical properties and biodegradation is discussed in detail. The optimum dose to guarantee microbiological sterilization without damage of the structure or meaningful loss of the mechanical properties is also reported.     

Synergized Antimicrobial Activity of Eugenol Incorporated Polyhydroxybutyrate Films Against Food Spoilage Microorganisms in Conjunction with Pediocin

Biopolymers and biopreservatives produced by microorganisms play an essential role in food technology. Polyhydroxyalkanoates and bacteriocins produced by bacteria are promising components to safeguard the environment and for food preservation applications. Polyhydroxybutyrate (PHB)-based antimicrobial films were prepared incorporating eugenol, from 10 to 200 μg/g of PHB. The films were evaluated for antimicrobial activity against foodborne pathogens, spoilage bacteria, and fungi such as Staphylococcus aureus, Escherichia coli, Salmonella typhimurium, Bacillus cereus, Aspergillus flavus, Aspergillus niger, Penicillium sp., and Rhizopus sp. The synergistic antimicrobial activity of the films in the presence of crude pediocin was also investigated. The broth system containing pediocin (soluble form) as well as antimicrobial PHB film demonstrated an extended lag phase and a significant growth reduction at the end of 24 h against the bacteria. Crude pediocin alone could not elicit antifungal activity, while inhibition of growth and sporulation were observed in the presence of antimicrobial PHB film containing eugenol (80 μg/g) until 7 days in the case of molds, i.e., A. niger, A. flavus, Penicillium sp., and Rhizopus sp. in potato dextrose broth. In the present study, we identified that use of pediocin containing broth in conjunction with eugenol incorporated PHB film could function in synergized form, providing effective hurdle toward food contaminating microorganisms. Furthermore, tensile strength, percent crystallinity, melting point, percent elongation to break, glass transition temperature, and seal strength of the PHB film with and without eugenol incorporation were investigated. The migration of eugenol on exposure to different liquid food simulants was also analyzed using Fourier transform infrared spectroscopy. The study is expected to provide applications for pediocin in conjunction with eugenol containing PHB film to enhance the shelf life of foods in the food industry.     

Synthesis of polyhydroxyalkanoate (PHA) from excess activated sludge under various oxidation-reduction potentials (ORP) by using acetate and propionate as carbon sources

Accumulation of poly hydroxyalkanoate (PHA) from excess activated sludge (EAS) was monitored and controlled via the oxidation-reduction potential (ORP) adjusting process. The ORP was adjusted and controlled by only regulating the gas-flow rate pumped into the cultural broth in which sodium acetate (C2) and propionate (C3) were used as carbon sources. Productivity of PHA and the PHA compositions at various C2 to C3 ratios were also investigated. When ORP was maintained at +30 mV, 35% (w/w) of PHA of cell dry weight obtained when C2 was used as sole carbon source. The PHA copolymer, poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), accumulated by EAS with different 3-hydroxyvalarate (3HV) molar fractions ranged from 8% to 78.0% when C2 and C3 was used as sole carbon source, By using ORP to monitor and control the fermentation process instead DO meter, the ORP system provided more precise control to the PHA accumulation process from EAS under low dissolved oxygen (DO) concentrations. Adjusting the C2 to C3 ratios in the media could control the composition such as the 3HV/3HB ratios of the PHBV. Furthermore, it might be an effective way to adjust the 3HV molar fractions in PHBV by controlling the DO concentration via the ORP monitoring system. The 3HV molar fractions in the PHBV declined with increasing ORP from −30 mV to +100 mV by adjusting the gas-flow rate (i.e. the DO concentration). It is concluded that the DO plays a very important role in the synthesis of 3HV subunits in PHBV co-polymer from the EAS. Therefore, a hypothetic metabolic model for PHA synthesis from EAS was proposed to try to explain the results in this study.     

Assessment of PHB with varying hydroxyvalerate content for potential packaging applications

Poly-(hydroxybutyrate) (PHB) is biodegradable aliphatic polyester that is produced by a wide range of microorganisms. Basic PHB has relatively high glass transition and melting temperatures. To improve flexibility for potential packaging applications, PHB is synthesized with various co-polymers such as poly-(3-hydroxyvalerate) (HV) leading to a decrease of the glass transitions and melting temperatures. In addition, the HV broadens the processing window since there is improved melt stability at lower processing temperatures. In this study, PHB synthesized with different valerate contents (5%, 12%, and 20%) and varying in molecular weights were characterized. All PHBV materials displayed a glass transition between −10 and 20 °C. The two melting transitions found for Aldrich 5%, 12%, and Tianan 20%, resulted from crystals formed during cooling of the samples. The complex viscosity decreased with increasing temperature due to a decrease in molecular weights of the samples. These results suggest that processing the co-polymer below 160 °C would be beneficial with low screw speed. The mechanical results indicate all PHBV materials had high elastic modulus and flexural strength with low tensile strength and elongation at break. The WVTR results indicated the polymer to be very hydrophilic, resulting in higher water transmission rates.     

Multiple melting behaviour of poly(3-hydroxybutyrate-co-hydroxyvalerate) using step-scan DSC

Melting behaviour and crystal morphology of poly(3-hydroxybutyrate) (PHB) and its copolymer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with various hydroxyvalerate (HV) contents [5 wt.% (PHB5V), 8 wt.% (PHB8V) and 12 wt.% (PHB12V)] have been investigated by conventional DSC, step-scan differential scanning calorimetry (SDSC), wide angle X-ray diffraction (WAXRD) and hot stage polarised optical microscopy (HSPOM). Crystallisation behaviour of PHB and its copolymers were investigated by isothermal crystallisation kinetics. Thermal properties were investigated after isothermal crystallisation treatment. Multiple melting peak behaviour was observed for all polymers. SDSC data revealed that PHB and its copolymers undergo melting-recrystallisation-remelting during heating, as evidenced by exothermic peaks in the IsoK baseline (C_p,IsoK, non-reversing signal). An increase in degree of crystallinity due to significant melt-recrystallisation was observed for isothermally crystallised polymers. SDSC proved a convenient and precise method for measurement of the apparent thermodynamic specific heat (C_p,ATD, reversing signal). PHB and PHBV showed different crystal morphologies for similar crystallisation condition. HSPOM results showed that the crystallisation rates reduced and sizes of spherulites were significantly increased as HV content increased.     

Yeasts as Producers of Polyhydroxyalkanoates: Genetic Engineering of Saccharomyces cerevisiae

The genes of the poly(β-hydroxybutyrate) (PHB) synthesis pathway in Ralstonia eutropha and Methylobacterium extorquens were successfully established in the yeast Saccharomyces cerevisiae. Expression of just the polyhydroxyalkanoate (PHA) synthase gene in some experiments, and all three PHB genes (i.e., the genes encoding β-ketothiolase, acetoacetyl-CoA reductase, and PHA synthase) in others, were detected in S. cerevisiae. Thus, it can be used as a “cell factory” for the production of PHB. The maximum amount of polyester accumulated was 6.7% (wt./wt.) when all three genes were expressed. The amount of polymer accumulated in the transgenic yeast harboring just the PHA synthase gene was similar (5.2%), but slightly lower, indicating the necessity of expressing all three genes for high PHB contents in the cells. For viable production of the polymer in yeasts, more needs to be learned about the metabolism of the yeast, especially about the pathways and intermediates competing with formation of the biopolymer. Another host probably needs to be chosen.

Bacteria (on the top) with PHB inclusions and yeasts with storage compounds (on the bottom).     

聚羟基烷酸酯酶降解动力学研究

研究了羟基丁酸 羟基戊酸共聚物 (PHBV)在脂肪酶中的降解行为 ,用滴定法测定降解速度并进行酶促反应动力学研究 .探讨了降解速度与酶浓度和底物浓度的数学关系和Michaelis Menten常数 ,从实验上和理论上证实了PHBV的物理形态和几何尺寸对酶降解过程的影响 ,以及实验数据与非均相动力学模型的拟合     

Electrospun fiber mats of poly(3‐hydroxybutyrate), poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), and their blends

Electrospinning of poly(3‐hydroxybutyrate) (PHB), poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and their blends was first carried out in chloroform at 50 °C on a stationary collector. The average diameter of the as‐spun fiber from PHB and PHBV solutions decreased with increasing collection distance and increased with increasing solution concentration and applied electrical potential. In all of the spinning conditions investigated, the average diameter of the as‐spun pure fibers ranged between 1.6 and 8.8 μm. Electrospinning of PHB, PHBV, and their blends was carried out further at a fixed solution concentration of 14% w/v on a homemade rotating cylindrical collector. Well‐aligned, cross‐sectionally round fibers without beads were obtained. The average diameter of the as‐spun pure and blend fibers ranged between 2.3 and 4.0 μm. The as‐spun fiber mats appeared to be more hydrophobic than the corresponding films and much improvement in the tensile strength and the elongation at break was observed for the blend fiber mats over those of the pure fiber ones. Lastly, indirect cytotoxicity evaluation of the as‐spun pure and blend fiber mats with mouse fibroblasts (L929) indicated that these mats posed no threat to the cells. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2923–2933, 2006     

The Methane Monooxygenase Intrinsic Activity of Kinds of Methanotrophs

Methanotrophs have promising applications in the epoxidation of some alkenes and some chlorinated hydrocarbons and in the production of a biopolymer, poly-β-hydroxybutyrate (poly-3-hydroxybutyrate; PHB). In contrast with methane monooxygenase (MMO) activity and ability of PHB synthesis of four kinds of methanotrophic bacteria Methylosinus trichosporium OB3b, M. trichosporium IMV3011, Methylococcus capsulatus HD6T, Methylomonas sp. GYJ3, and the mixture of the four kinds of strains, M. trichosporium OB3b is the highest of the four in the activity of propene epoxidation (10.72 nmol/min mg dry weight of cell [dwc]), the activity of naphthalene oxidation (22.7 mmol/mg dwc), and ability in synthesis of PHB(11% PHB content in per gram dry weight of cell in 84 h). It could be feasible to improve the MMO activity by mixing four kinds of methanotrophs. The MMO activity dramatically decreased when the cellular PHB accumulated in the second stage. The reason for this may be the dilution of the MMO system in the cells with increasing PHB contents. It has been found that the PHB contents at the level of 1–5% are beneficial to the cells for maintenance of MMO epoxidation activity when enough PHB have been accumulated. Moreover, it was also found that high particulate methane monooxygenase activity may contribute to the synthesis of PHB in the cell, which could be used to improve the yield of PHB in methanotrophs.     

Cloning and sequence analysis of the poly(3-hydroxyalkanoic acid)-synthesis genes ofPseudomonas acidophila

Pseudomonas acidophila can grow with CO₂ as a sole carbon source by the possession of a recombinant plasmid that clones genes that confer chemolithoautotrophic growth ability derived from the H₂-oxidizing bacteriumAlcaligenes hydrogenophilus. H₂-oxidizing bacteria produce poly(3-hydroxybutyric acid) (PHB) from CO₂, but recombinant P.acidophila can produce the more useful biopolymer poly(3-hydroxyalkanoic acid) (PHA). In this study, thepha genes ofP. acidophila were cloned and a sequence analysis was carried out. A gene library was constructed using the cosmid vector pVK102. A recombinant cosmid carrying thepha genes was selected by the complementation of a PHB-negative mutant ofAlcaligenes eutrophus H16. The resulting recombinant cosmid pIK7 contained a 14.8-kb DNA insert. Subcloning was done, and the recombinant plasmid pEH74 was selected by hybridization with theA. eutrophus H16pha genes.Escherichia coli possessing pEH74 produced PHB, indicating that pEH74 contained thepha genes ofP. acidophila. The nucleotide sequences of the PHA-synthesis genesphaA (3-ketothiolase),phaB (acetoacetyl-CoA reductase), andphaC (PHA synthase) in pEH74 were determined. The homologies ofphaA, phaB, andphaC betweenP. acidophila andA. eutrophus H16 were 64.7, 76.1, and 56.6%, respectively.