Transition Metal-Free Aromatic C−H,C−N,C−S and C−O Borylation

Aromatic organoboron compounds are highly valuable building blocks in organic chemistry. They were mainly synthesized through aromatic C−H and C−Het borylation, in which transition metal-catalysis dominate. In the past decade, with increasing attention to sustainable chemistry, numerous transition metal-free C−H and C−Het borylation transformations have been developed and emerged as efficient methods towards the synthesis of aromatic organoboron compounds. This account mainly focuses on recent advances in transition metal-free aromatic C−H, C−N, C−S, and C−O borylation transformations and provides insights to where further developments are required.     

Magnetische Kernresonanzuntersuchungen an Ti−C−H-Legierungen

Ohne ZusammenfassungMit 4 Abbildungen     

Divergent Coupling of Benzocyclobutenones with Indoles via C−H and C−C Activations

Highly selective divergent coupling reactions of benzocyclobutenones and indoles, in which the chemoselectivity is controlled by catalysts, are reported herein. The substrates undergo C2(indole)–C8(benzocyclobutenone) coupling to produce benzylated indoles and benzo[b]carbazoles in the Ni- and Ru-catalyzed reactions. A completely different selectivity pattern C2(indole)–C2(benzocyclobutenone) coupling to form arylated indoles is observed in the Rh-catalyzed reaction. Preliminary mechanistic studies suggest C−H and C−C activations in the reaction pathway. Synthetic utility of this protocol is demonstrated by the selective synthesis of three different types of carbazoles from the representative products.     

Reversible Boron-Insertion into Aromatic C−C Bonds

Formation of borabicyclo[3.2.0]heptadiene derivatives was achieved via boron-insertion into aromatic C−C bonds in the photo-promoted skeletal rearrangement reaction of triarylboranes bearing an ortho-phosphino substituent (ambiphilic phosphine-boranes). The borabicyclo[3.2.0]heptadiene derivatives were fully characterized by NMR and X-ray analyses. The dearomatized products were demonstrated to undergo the reverse reaction in the dark at room temperature, realizing photochemical and thermal interconversion between triarylboranes and boron-doped bicyclic systems. Experimental and theoretical studies revealed that sequential two electrocyclic reactions involving E/Z-isomerization of an alkene moiety proceed via a highly strained trans-borepin intermediate.     

Rhoda-Electrocatalyzed C−H Methylation and Paired Electrocatalyzed C−H Ethylation and Propylation

The use of electricity over traditional stoichiometric oxidants is a promising strategy for sustainable molecular assembly. Herein, we describe the rhoda-electrocatalyzed C−H activation/alkylation of several N-heteroarenes. This catalytic approach has been successfully applied to several arenes, including biologically relevant purines, diazepam, and amino acids. The versatile C−H alkylation featured water as a co-solvent and user-friendly trifluoroborates as alkylating agents. Finally, the rhoda-electrocatalysis with unsaturated organotrifluoroborates proceeded by paired electrolysis.     

C36衍生物C36H12和C36X12簇分子的理论研究

采用从虎ＨＦ／ＳＴＯ－３Ｇ方法,对３６及其衍生物Ｃ３６Ｈ１２和Ｃ３６Ｘ１２（Ｘ＝Ｆ,Ｃｌ,Ｂｒ,Ｉ）进行计算研究,讨论了Ｃ３６Ｈ１２和Ｃ３６Ｘ１２簇分子几何结构随卤素Ｘ原子序数变化的规律,分子的稳定性及电荷转移情况,结果表明,Ｃ３６Ｈ１２和Ｃ３６Ｆ１２在所有簇分子中是较为稳定的。     

Asymmetric Pd(II)-Catalyzed C−O,C−N,C−C Bond Formation Using Alkenes as Substrates: Insight into Recent Enantioselective Developments

This Review summarizes the advances in the catalytic enantioselective mono- and difunctionalization of alkenes, highlighting the fundamental role of ligands. Several types of asymmetric reactions have been developed involving different bonds formation, C−O, C−N and C−C, highlighting the urgency to go ahead in the search for new ligands and synthetic methodologies in order to improve the control over the reaction selectivity and activity and thus, to increase the applications in the synthesis of heterocyclic scaffolds and biologically active compounds. The Review is organized into paragraphs, which discuss the type of bond formed during the nucleopalladation, C−O, C−N, C−C bonds, and the type of reaction involved.     

On-Surface Synthesis of One-Dimensional Carbon-Based Nanostructures via C−X and C−H Activation Reactions

The past decades have witnessed the emergence of low-dimensional carbon-based nanostructures owing to their unique properties and various subsequent applications. It is of fundamental importance to explore ways to achieve atomically precise fabrication of these interesting structures. The newly developed on-surface synthesis approach provides an efficient strategy for this challenging issue, demonstrating the potential of atomically precise preparation of low-dimensional nanostructures. Up to now, the formation of various surface nanostructures, especially carbon-based ones, such as graphene nanoribbons (GNRs), kinds of organic (organometallic) chains and films, have been achieved via on-surface synthesis strategy, in which in-depth understanding of the reaction mechanism has also been explored. This review article will provide a general overview on the formation of one-dimensional carbon-based nanostructures via on-surface synthesis method. In this review, only a part of the on-surface chemical reactions (specifically, C−X (X=Cl, Br, I) and C−H activation reactions) under ultra-high vacuum conditions will be covered.     

Not Carbon s–p Hybridization,but Coordination Number Determines C−H and C−C Bond Length

A fundamental and ubiquitous phenomenon in chemistry is the contraction of both C−H and C−C bonds as the carbon atoms involved vary, in s–p hybridization, along sp³ to sp² to sp. Our quantum chemical bonding analyses based on Kohn–Sham molecular orbital theory show that the generally accepted rationale behind this trend is incorrect. Inspection of the molecular orbitals and their corresponding orbital overlaps reveals that the above-mentioned shortening in C−H and C−C bonds is not determined by an increasing amount of s-character at the carbon atom in these bonds. Instead, we establish that this structural trend is caused by a diminishing steric (Pauli) repulsion between substituents around the pertinent carbon atom, as the coordination number decreases along sp³ to sp² to sp.     

Carbon Monoxide Activation by a Molecular Aluminium Imide: C−O Bond Cleavage and C−C Bond Formation

Anionic molecular imide complexes of aluminium are accessible via a rational synthetic approach involving the reactions of organo azides with a potassium aluminyl reagent. In the case of K₂[( NON )Al(NDipp)]₂ ( NON =4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethyl-xanthene; Dipp=2,6-diisopropylphenyl) structural characterization by X-ray crystallography reveals a short Al−N distance, which is thought primarily to be due to the low coordinate nature of the nitrogen centre. The Al−N unit is highly polar, and capable of the activation of relatively inert chemical bonds, such as those found in dihydrogen and carbon monoxide. In the case of CO, uptake of two molecules of the substrate leads to C−C coupling and C≡O bond cleavage. Thermodynamically, this is driven, at least in part, by Al−O bond formation. Mechanistically, a combination of quantum chemical and experimental observations suggests that the reaction proceeds via exchange of the NR and O substituents through intermediates featuring an aluminium-bound isocyanate fragment.     

Iron-Catalyzed Oxidative C−O and C−N Coupling Reactions Using Air as Sole Oxidant**

We describe the oxygenation of tertiary arylamines, and the amination of tertiary arylamines and phenols. The key step of these coupling reactions is an iron-catalyzed oxidative C−O or C−N bond formation which generally provides the corresponding products in high yields and with excellent regioselectivity. The transformations are accomplished using hexadecafluorophthalocyanine−iron(II) (FePcF₁₆) as catalyst in the presence of an acid or a base additive and require only ambient air as sole oxidant.     

Non-Covalent Interaction-Controlled Site-Selective C−H Transformations

Site-selective C−H transformations are important to obtain desired compounds as single products in a highly efficient manner. However, it is generally difficult to achieve such transformations because organic substrates contain many C−H bonds with similar reactivities. Therefore, the development of practical and efficient methods for controlling site selectivity is highly desirable. The most frequently used strategy is “directing group method”. Although this method is highly effective and promotes site-selective reactions, it has several limitations. Our group recently reported other methods to achieve site-selective C−H transformations using non-covalent interactions between a substrate and a reagent or a catalyst and a substrate (non-covalent method). In this personal account, the background of site-selective C−H transformations, our reaction design to achieve site-selective C−H transformations, and recently reported reactions are explained.     

A High-Performance n-Type Thermoelectric Polymer from C−H/C−H Oxidative Direct Arylation Polycondensation

n-Type conjugated polymers (CPs) are crucial in the applications of organic electronics. Direct coupling of electron-deficient C−H monomer via selective C−H activation, namely C−H/C−H oxidative direct arylation polycondensation (Oxi-DArP), is an ideal approach toward such CPs. Herein, Oxi-DArP is firstly adopted to synthesize a high-performance n-type CP using a newly developed monomer, i.e., 3,6-di(thiazol-5-yl)-diketopyrrolopyrrole (Tz-5-DPP). Tz-5-DPP based homopolymer PTz - 5 - DPP with a molecular weight of 22 kDa has been synthesized via Oxi-DArP. After n-doping, PTz - 5 - DPP films exhibited electric conductivity values up to 8 S cm⁻¹ and power factors (PFs) up to 106 μW m⁻¹ K⁻². Notably, this PF value is the highest for n-type polymer thermoelectric materials to date. The Oxi-DArP synthesis and the excellent n-type performance of the polymer make this work an important step toward the straightforward and sustainable preparation of high-performance n-type polymer semiconductors.     

Aryne-Enabled C−N Arylation of Anilines

Anilines are potentially high-value arylating agents, but are limited by the low reactivity of the strong C−N bond. We show that the reactive intermediate benzyne can be used to both activate anilines, and set-up an aryl transfer reaction in a single step. The reaction does not require any transition metal catalysts or stoichiometric organometallics, and establishes a metal-free route to valuable biaryl products by functionalizing the aniline C−N bond.     

高稳定性的氮掺杂氧化钽光催化甲醇C−H活化和直接C−C偶联制乙二醇

乙二醇是非常重要的基础化学品,不仅可以作为合成聚合物(如聚对苯二甲酸乙二醇酯)的重要单体,也可以用作防冻剂和燃料添加剂等,具有广泛的用途.乙二醇的年产量超过2500万吨,目前主要的工业合成路线是由石油衍生的乙烯通过环氧化制环氧乙烷,环氧乙烷再水解制乙二醇.甲醇是一种清洁的平台化合物,不仅可以由天然气和煤炭通过传统的合成...     

Vibrational Predissociation Spectra of C2N− and C3N−: Bending and Stretching Vibrations

We present infrared predissociation spectra of C₂N⁻(H₂) and C ₃N⁻(H₂) in the 300–1850 cm⁻¹ range. Measurements were performed using the FELion cryogenic ion trap end user station at the Free Electron Lasers for Infrared eXperiments (FELIX) laboratory. For C₂N⁻(H₂), we detected the CCN bending and CC−N stretching vibrations. For the C₃N⁻(H₂) system, we detected the CCN bending, the CC−CN stretching, and multiple overtones and/or combination bands. The assignment and interpretation of the presented experimental spectra is validated by calculations of anharmonic spectra within the vibrational configuration interaction (VCI) approach, based on potential energy surfaces calculated at explicitly correlated coupled cluster theory (CCSD(T)-F12/cc-pVTZ−F12). The H₂ tag acts as an innocent spectator, not significantly affecting the C_2,3N⁻ bending and stretching mode positions. The recorded infrared predissociation spectra can thus be used as a proxy for the vibrational spectra of the bare anions.     

富勒烯C36及其衍生物C36H2n的量子化学研究

应用密度泛函B₃LYP方法和从头算(abinitio)HF方法,在3-21G理论水平上,对具有C_2v,D_2d,D_3h和D_6h对称性的四种C₃₆异构体以及在保持D_2d,D_3h和D_6h对称性条件下形成的不同氢化物进行了量子化学计算,研究了它们在不同量子态时的分子几何构型和电子结构.结果表明,电子相关效应在C₃₆簇化合物的电子结构中起着重要作用.它们最稳定的结构是C₃₆的³A_2u量子态D_6h异构体,而C₃₆的氢化物是在D_3h异构体的C₂位置等同碳原子上形成的¹A_1'量子态氢化物C₃₆H₁₂.     

Palladium-Catalyzed Atroposelective Kinetic C−H Olefination and Allylation for the Synthesis of C−B Axial Chirality

The direct C−H functionalization of 1,2-benzazaborines, especially asymmetric version, remains a great challenge. Here we report a palladium-catalyzed enantioselective C−H olefination and allylation reactions of 1,2-benzazaborines. This asymmetric approach is a kinetic resolution (KR), providing various C−B axially chiral 2-aryl-1,2-benzazaborines and 3-substituted 2-aryl-1,2-benzazaborines in generally high yields with excellent enantioselectivities (selectivity (S) factor up to 354). The synthetic potential of this reaction is showcased by late-stage modification of complex molecules, scale-up reaction, and applications.     

Homolytic C−H Bond Activation by Phosphine−Quinone-Based Radical Ion Pairs

Herein, we present the formation of transient radical ion pairs (RIPs) by single-electron transfer (SET) in phosphine−quinone systems and explore their potential for the activation of C−H bonds. PMes₃ (Mes=2,4,6-Me₃C₆H₂) reacts with DDQ (2,3-dichloro-5,6-dicyano-1,4-benzoquinone) with formation of the P−O bonded zwitterionic adduct Mes₃P−DDQ ( 1 ), while the reaction with the sterically more crowded PTip₃ (Tip=2,4,6-iPr₃C₆H₂) afforded C−H bond activation product Tip₂P(H)(2-[CMe₂(DDQ)]-4,6-iPr₂-C₆H₂) ( 2 ). UV/Vis and EPR spectroscopic studies showed that the latter reaction proceeds via initial SET, forming RIP [PTip₃]⋅⁺[DDQ]⋅⁻, and subsequent homolytic C−H bond activation, which was supported by DFT calculations. The isolation of analogous products, Tip₂P(H)(2-[CMe₂{TCQ−B(C₆F₅)₃}]-4,6-iPr₂-C₆H₂) ( 4 , TCQ=tetrachloro-1,4-benzoquinone) and Tip₂P(H)(2-[CMe₂{oQ^tBu−B(C₆F₅)₃}]-4,6-iPr₂-C₆H₂) ( 8 , oQ^tBu=3,5-di-tert-butyl-1,2-benzoquinone), from reactions of PTip₃ with Lewis-acid activated quinones, TCQ−B(C₆F₅)₃ and oQ^tBu−B(C₆F₅)₃, respectively, further supports the proposed radical mechanism. As such, this study presents key mechanistic insights into the homolytic C−H bond activation by the synergistic action of radical ion pairs.     

Transformations of Aryl Ketones via Ligand-Promoted C−C Bond Activation

The coupling of aromatic electrophiles (aryl halides, aryl ethers, aryl acids, aryl nitriles etc.) with nucleophiles is a core methodology for the synthesis of aryl compounds. Transformations of aryl ketones in an analogous manner via carbon–carbon bond activation could greatly expand the toolbox for the synthesis of aryl compounds due to the abundance of aryl ketones. An exploratory study of this approach is typically based on carbon–carbon cleavage triggered by ring-strain release and chelation assistance, and the products are also limited to a specific structural motif. Here we report a ligand-promoted β-carbon elimination strategy to activate the carbon–carbon bonds, which results in a range of transformations of aryl ketones, leading to useful aryl borates, and also to biaryls, aryl nitriles, and aryl alkenes. The use of a pyridine-oxazoline ligand is crucial for this catalytic transformation. A gram-scale borylation reaction of an aryl ketone via a simple one-pot operation is reported. The potential utility of this strategy is also demonstrated by the late-stage diversification of drug molecules probenecid, adapalene, and desoxyestrone, the fragrance tonalid as well as the natural product apocynin.