Electrochemical polymerization of polyaniline doped with Zn2+ as the electrode material for electrochemical supercapacitors

Polyaniline doped with Zn²⁺ (PANI/Zn²⁺) films was synthesized by cyclic voltammetric method on stainless steel mesh substrates in 0.2 mol L^?1 aniline and 0.5 mol L^?1 sulfuric acid electrolyte with various concentrations of zinc sulfate (ZnSO₄·7H₂O). The structure and morphology of PANI and PANI/Zn²⁺ films were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy techniques, respectively. The electrochemical properties of PANI and PANI/Zn²⁺ films were investigated by cyclic voltammetry, galvanostatic charge–discharge test, and electrochemical impedance spectroscopy in 0.5 mol L^?1 H₂SO₄ electrolyte in a three-electrode system. The results show that the surface morphology of PANI/Zn²⁺ is more rough than that of pure PANI. The specific capacitance of the PANI/Zn²⁺ film displays a larger specific capacitance of 738 F g^?1, lower resistance, and better stability as compared with the pure PANI film. Thus, good capacitive performance demonstrates its potential superiority for supercapacitors.     

Simultaneous,Selective and Highly Sensitive Voltammetric Determination of Lead,Cadmium, and Zinc via Modified Pencil Graphite Electrodes

Pencil graphite electrode (PGE) modified with MWCNT and Bi³⁺ (MWCNT/Bi/PGE) was utilized in simultaneous analysis of Pb²⁺, Cd²⁺, and Zn²⁺. Surface and electrochemical characteristics of MWCNT/Bi/PGE were investigated via SEM, cyclic voltammetry, electrochemical impedance spectroscopy, and FTIR measurements. Even though modification with MWCNT did not improve the electroactive surface area, it significantly decreased the charge transfer resistance. Furthermore, modification with Bi³⁺ significantly increased the sensitivity. Finally, MWCNT/Bi/PGE exhibited the highest sensitivity and reproducibility compared to PGE and PGE modified with only MWCNT. MWCNT/Bi/PGE provided LOD values of 0.27, 0.43, and 1.63 μg L⁻¹, and linear ranges of 1–80, 5–80, and 10–80 μg L⁻¹ for Pb²⁺, Cd²⁺, and Zn²⁺, respectively. Proposed modification method offers effective electroanalytical performance with low time consumption and cost for the analyst.     

PPy doped with different metal sulphate as electrode materials for supercapacitors

A facile approach has been established to prepare PPy via in situ polymerization with different metal sulfate as dopants. The morphology and structure of PPy and doped PPy were characterized by scanning electron microscopy (SEM) and fourier transform infrared (FT-IR). It was found that doped PPy has different morphology and a slight structure change. The electrochemical performance of the samples has been illustrated by cyclic voltammetry (CV), galvanostatic charge–discharge (GCD) and AC impedance measurements. Compared with the PPy, the specific capacitance of PPy/Cu²⁺ has been improved to 224 F g^–1 at the current density of 0.6 A g^–1. Also, the relationship between electrochemical properties of doped PPy and various parameters of metal ions has been investigated.     

Multi-walled carbon nanotubes as electrode materials for electrochemical studies of organometallic compounds in organic solvent media

Abstract  

Films of vertically aligned multi-walled carbon nanotubes (MWCNT) were selectively synthesized on silicon dioxide substrate by catalytic chemical vapor deposition using either benzene or acetonitrile as carbon source and ferrocene (1% w/w) as catalyst. The MWCNT were extensively characterized by using scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and Raman spectroscopy. In order to examine the prospective application of the fabricated MWCNT films for the detection of electro-active compounds in organic solvent media, electrochemical studies of the oxidation of cobaltocene (CoCp₂) to cobaltocenium cation (CoCp₂⁺) (Cp = cyclopentadienyl anion) in acetonitrile were performed on these films. For this purpose, cyclic voltammetry and electrochemical impedance spectroscopy were employed. The electrochemical parameters for the CoCp₂^+/0 couple in acetonitrile were derived and compared with those obtained using a conventional glassy carbon electrode. The results demonstrate that the synthesized MWCNT films are promising electrode materials for the electrochemical detection of electro-active species in organic solvents. The MWCNT film formed upon decay of benzene has higher capacitance, less Warburg impedance, and less charge transfer resistance, and consequently it provides faster electron transfer kinetics.     

Preparation of polypyrrole/multi-walled carbon nanotube hybrids by electropolymerization combined with a coating method for counter electrodes in dye-sensitized solar cells

In this work, multi-wall carbon nanotubes coated with polypyrrole (PPy/MWCNT) have been used as counter electrode (CE) materials for dye-sensitized solar cells (DSSCs). PPy was deposited onto fluorine-doped tin-oxide-coated glass by electrochemical polymerization of pyrrole. Three surfactants were used in the preparation of the hybrids: cationic cetyltrimethylammonium bromide, anionic sodium dodecylbenzenesulfonate (DBSNa), and non-ionic polyoxyethylene sorbitan monolaurate (Tween20). The morphologies of the PPy and PPy/MWCNT hybrids were investigated using scanning electron spectroscopy. Chemical composition of the prepared CEs was determined by X-ray photoelectron spectroscopy and Fourier-transformed infrared spectroscopy. The catalytic activity of the PPy and PPy/MWCNT layers was evaluated using cyclic voltammetry, and the photovoltaic properties of DSSCs with PPy and PPy/MWCNT CEs were characterized using I–V measurements. PPy/MWCNT samples that were prepared by electrochemical polymerization showed the best results when the anionic surfactant DBSNa was used during polymerization. The photoelectric conversion efficiency of PPy/MWCNT prepared by electrochemical polymerization was 2.9%, which was 59% of that of Pt CE (4.9%).     

肝素钠掺杂球状聚吡咯的合成及其电化学电容

以生物制剂肝素钠为掺杂剂,由自组装方法合成出平均粒径为100 nm的球状聚吡咯(PPy),用作超级电容器电极材料.透射电镜(TEM)、循环伏安、恒流充放电和电化学交流阻抗测试表明,肝素钠掺杂聚吡咯呈现较好的形貌和电容性质,在电流密度3 mA/cm2下充放电,单电极比电容达到338 F/g.     

Titanium Dioxide/Multi-walled Carbon Nanotubes Composite Modified Pencil Graphite Sensor for Sensitive Voltammetric Determination of Propranolol in Real Samples

A very effective electrochemical sensor for the analysis of propranolol was constructed using TiO₂/MWCNT film deposited on the pencil graphite electrode as modifier. The modified electrode represented excellent electrochemical properties such as fast response, high sensitivity and low detection limit. The proposed sensor showed an excellent selective response to propranolol in the presence of foreign species and other drugs. The electrochemical features of the modified electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy (EIS) technique which indicated a decrease in resistance of the modified electrode versus bare PGE and MWCNT/PGE. The surface morphology for the modified electrode was determined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FT-IR). Differential pulse technique (DPV) was used to determine propranolol which showed a good analytical response in the linear range of 8.5×10⁻⁸-6.5×10⁻⁶ M with a limit of detection 2.1×10⁻⁸ M. The TiO₂/MWCNT/PGE sensor was conveniently applied for the measurement of propranolol in biological and pharmaceutical media.     

One‐pot synthesis of polyaniline doped with transition metal ions using H2O2 as oxidant

Polyanilines (PANIs) doped with Zn²⁺ and Cu²⁺ were synthesized by H₂O₂ oxidative polymerization of aniline in the presence of corresponding metal chloride in solution. The products were characterized by elemental analysis, UV‐Vis‐NIR, FTIR and Raman spectroscopies. Scanning electron micrograph was employed to examine the morphology of PANIs fabricated in the presence of different transition metals. Experimental results showed that transition metal ions had been successfully incorporated into the polymer, and there was a strong interaction between the transition metal ions and the PANI chains. The electrical conductivity of PANI doped with Zn²⁺ and Cu²⁺ is 0.37 and 0.21 S/cm, respectively, which is higher than that of HCl doping PANI corresponding to 0.052 S/cm. The cyclic voltammetric study has indicated that incorporation of metal ions in PANI backbone results in increasing of specific capacitance compared to that of HCl doping PANI. Copyright © 2014 John Wiley & Sons, Ltd.     

Poly(4-amino-2,1,3-benzothiadiazole) films: preparation,characterization and applications

The electrochemical preparation of novel poly(4-amino-2,1,3-benzothiadiazole) films on a platinum surface in sulfuric aqueous medium by cyclic voltammetry is described. The resulting polymeric electrodes were characterized by FT Raman spectroscopy, scanning electron microscopy and potentiometry. Spectroscopic measurements confirmed the participation of the amino group and sulfur atom in the process that forms the granular structure of poly(ABTD). Potentiometric results showed the response of the poly(ABTD) film towards divalent cations such as Zn²⁺ and Cd²⁺ in the concentration range from 10^?7 up to 10^?2 mol L^?1. A cooperative combination of the cation-sensitive poly(ABTD) electrodes in an array with pH- and anion-sensitive electrodes was able to recognize different Czech beers.     

Voltammetric Determination of Phenoxybenzyl‐Type Insecticides at Chemically Modified Conducting Polymer‐Carbon Nanotubes Coated Electrodes

The electrochemical reduction of three common insecticides such as cypermethrin (CYP), deltamethrin (DEL) and fenvalerate (FEN) was investigated at glassy carbon electrode (GCE), multiwalled carbon nanotubes modified GCE (MWCNT‐GCE), polyaniline (herein called as modifier M₁) and polypyrrole (herein called as modifier M₂) deposited MWCNT/GCE using cyclic voltammetry. Influences of pH, scan rate, and concentration were studied. The surface morphology of the modified film was characterized by scanning electron microscopy (SEM) and X‐ray diffraction analysis (XRD). A systematic study of the experimental parameters that affect differential pulse stripping voltammetry (DPSV) was carried out and the optimized experimental conditions were arrived at. The calibration plots were linear over the insecticide's concentration range 0.1–100 mg L^?1 and 0.05–100 mg L^?1 for all the three insecticides at MWCNT‐GCE and MWCNT(M₁)‐GCE respectively. The MWCNT(M₂)‐GCE performed well among the three electrode systems and the determination range obtained was 0.01–100 mg L^?1 for CYP, DEL and FEN. The limit of detection (LOD) was 0.35 μg L^?1, 0.9 μg L^?1 and 0.1 μg L^?1 for CYP, DEL and FEN respectively on MWCNT(M₂)‐GCE modified system. Suitability of this method for the trace determination of insecticide in spiked soil sample was also determined.     

A Molecular Approach for Mitigation of Aluminum Pitting based on Films of Zinc(II) and Gallium(III) Metallosurfactants

The use of metallosurfactants to prevent pitting corrosion of aluminum surfaces is discussed based on the behavior of the metallosurfactants [Zn^II(L^N2O2)H₂O] ( 1 ) and [Ga^III(L^N2O3)] ( 2 ). These species were deposited as multilayer Langmuir–Blodgett films and characterized by IR reflection absorption spectroscopy and UV/Vis spectroscopy. Scanning electron microscopy images, potentiodynamic polarization experiments, and electrochemical impedance spectroscopy were used to assess corrosion mitigation. Both metallosurfactants demonstrate superior anticorrosion activity due to the presence of redox-inactive 3d¹⁰ metal ions that enhance the structural resistance of the ordered molecular films and limit chloride mobility and electron transfer.     

Remarkable bismuth-gold alloy decorated on MWCNT for glucose electrooxidation: the effect of bismuth promotion and optimization via response surface methodology

In this study, the carbon nanotube supported gold, bismuth, and gold-bismuth(Au/MWCNT, Bi/MWCNT, and Au-Bi/MWCNT) nanocatalysts were prepared with NaBH₄ reduction method at varying molar atomic ratio for glucose electrooxidation (GAEO). The synthesized nanocatalysts at different Au: Bi atomic ratios are characterized via x - ray diffraction (XRD), transmission electron microscopy (TEM), and N₂ adsorption-desorption. For the performance of AuBi/MWCNT for GAEO, electrochemical measurements are performed by using different electrochemical techniques namely cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). Monometallic Au/MWCNT exhibits higher activity than Bi/MWCNT with 256.57 mA/mg (0.936 mA/cm²) current density. According to CV results, Au₈₀Bi₂₀/MWCNT nanocatalyst has the highest GAEO activity with the mass activity of 320.15 mA/mg (1.133 mA/cm²). For Au₈₀Bi₂₀/MWCNT, central composite design (CCD) is utilized for optimum conditions of the electrode preparation. Au₈₀Bi₂₀/MWCNT nanocatalysts are promising anode nanocatalysts for direct glucose fuel cells (DGFCs).     

氧化石墨烯/聚吡咯插层复合材料的制备和电化学电容性能

以FeCl₃-甲基橙(MO)为模板, 通过化学原位聚合法成功制备出氧化石墨烯/聚吡咯(GO/PPy)插层复合材料. 采用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)和透射电镜(TEM)等测试技术对复合材料进行物性表征. 此外, 利用循环伏安、恒电流充放电和交流阻抗测试方法对复合材料在两种不同水系电解液(1 mol·L^-1 Na₂SO₄和1 mol·L^-1 H₂SO₄)中的电化学性能进行了研究. 结果显示: 氧化石墨烯和聚吡咯表现出各自优势并发挥协同作用, 使得GO/PPy插层复合材料在中性和酸性电解液中都显示出可观的比电容. 电流密度为0.5 A·g^-1时, GO/PPy 插层复合材料在Na₂SO₄和H₂SO₄电解液中的比电容分别为449.1 和619.0 F·g^-1, 明显高于纯PPy的比电容. 经过800 次循环稳定性测试后, 两种不同电解液中, 复合材料初始容量的保持率分别为92%和62%. 其中酸性电解液体系中初始容量更大, 而中性溶液中具有更稳定的循环性能.     

Inhibitive properties of a phosphonate-based formulation for corrosion control of carbon steel

The aim of the present work was to study the corrosion inhibition of carbon steel using a ternary formulation. This new ternary inhibitor formulation, viz., 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC), with zinc ions and silicate ions was used to protect carbon steel from corrosion in a low-chloride environment. The gravimetric studies showed that 96 % inhibition efficiency was achieved with the ternary system consisting of 50 ppm PBTC, 50 ppm Zn²⁺ ions, and 10 ppm silicate ions. Out of 0.310 mmol of Zn²⁺ ions, 0.218 mmol was diffused from the bulk of the solution to the metal surface, as revealed from the studies of the solutions by atomic absorption spectroscopy (AAS). Electrochemical methods (potentiostatic polarization and electrochemical impedance spectroscopy) and surface characterization techniques [Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and atomic force microscopy (AFM)] were used to ascertain the nature of the protective film and for explaining the mechanistic aspects of corrosion inhibition.     

Enhanced zinc ion transport in gel polymer electrolyte: effect of nano-sized ZnO dispersion

The effect of the dispersion of zinc oxide (ZnO) nanoparticles in the zinc ion conducting gel polymer electrolyte is studied. Changes in the morphology/structure of the gel polymer electrolyte with the introduction of ZnO particles are distinctly observed using X-ray diffraction and scanning electron microscopy. The nanocomposites offer ionic conductivity values of >10^?3 S cm^?1 with good thermal and electrochemical stabilities. The variation of ionic conductivity with temperature follows the Vogel–Tamman–Fulcher behavior. AC impedance spectroscopy, cyclic voltammetry, and transport number measurements have confirmed Zn²⁺ ion conduction in the gel nanocomposites. An electrochemical stability window from ?2.25 to 2.25 V was obtained from voltammetric studies of nanocomposite films. The cationic (i.e., Zn²⁺ ion) transport number (t ₊) has been found to be significantly enhanced up to a maximum of 0.55 for the dispersion of 10 wt.% ZnO nanoparticles, indicating substantial enhancement in Zn²⁺ ion conductivity. The gel polymer electrolyte nanocomposite films with enhanced Zn²⁺ ion conductivity are useful as separators and electrolytes in Zn rechargeable batteries and other electrochemical applications.     

石墨烯-聚吡咯纳米管杂化材料的制备及电容特性

使用化学连接的方法制备一种石墨烯-聚吡咯纳米管杂化材料。使用扫描电镜、透射电镜、傅里叶变换红外光谱仪、光电子能谱仪以及电化学工作站对产物的形貌、结构以及电容特性进行表征。结果表明,在杂化材料中石墨烯和聚吡咯纳米管分散均匀,在石墨烯与聚吡咯纳米管之间通过酰胺基团形成了共价键连接。此杂化材料在0.3 A.g-1电流密度下的比电容为1 368F.g-1,在1.5 A.g-1电流密度下的比电容为759 F.g-1,在1 000次循环伏安循环后的剩余比电容值为初始比电容值的85.5%,显示出良好的电容特性。     

Electrochemical capacitance performance of polypyrrole–titania nanotube hybrid

In this study, the polypyrrole–titania nanotube hybrid has been synthesized for an electrochemical supercapacitor application. The highly ordered and independent titania nanotube array is fabricated by an electro-oxidation of titanium sheet through an electrochemical anodization process in an aqueous solution containing ammonium fluoride, phosphoric acid and ethylene glycol. The polypyrrole–titania nanotube hybrid is then prepared by electrodepositing the conducting polypyrrole into well-aligned titania nanotubes through a normal pulse voltammetry deposition process in an organic acetonitrile solution containing pyrrole monomer and lithium perchlorate. The morphology and microstructure of polypyrrole–titania nanotube hybrid are characterized by scanning electron microscopy, infrared spectroscopy and Raman spectroscopy. The electrochemical capacitance performance is determined by cyclic voltammetry and charge/discharge measurement. It indicates that the polypyrrole film can been uniformly deposited on both surfaces of titania nanotube walls, demonstrating a heterogeneous coaxial nanotube structure. The specific capacitance of polypyrrole–titania nanotube hybrid is determined to be 179?F?g^?1 based on the polypyrrole mass. The specific energy and specific power are 7.8?Wh?kg^?1 and 2.8?kW?kg^?1 at a constant charge/discharge current of 1.85?mA?cm^?2, respectively. The retained specific capacitance still keeps 85% of the initial capacity even after 200 cycle numbers. This result demonstrates the satisfying stability and durability of PPy–TiO₂ nanotube hybrid electrode in a cyclic charge/discharge process. Such a composite electrode material with highly ordered and coaxial nanotube hybrid structure can contribute high energy storage for supercapacitor applications.     

A voltammetric sensor for simultaneous determination of lead,cadmium and zinc on an activated carbon fiber rod

A simple, low cost and sensitive voltammetric sensor was developed for the simultaneous detection of Pb²⁺, Cd²⁺, and Zn²⁺ based on a disposable carbon fiber rod (CFR). The important factors to enhance the sensing property were creation of a clean surface by dealing with CFR at a high potential and electrochemical deposition of Bi film to improve the accumulation of heavy metal ions.     

Selective Determination of Copper (II) Based on Aluminum Silicon Carbide Nanoparticles Modified Glassy Carbon Electrode by Square Wave Stripping Voltammetry

The morphology and structure of as‐prepared aluminum silicon carbide (Al₄SiC₄) were characterized using X‐ray diffraction (XRD) patterns, scanning electron microscope (SEM), transmission electron microscopy (TEM) and UV‐vis spectra. The Al₄SiC₄ nanoparticles modified glassy carbon electrode (GCE) was further investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Based on this, this kind of new electrode was used for the detection of trace Cu²⁺ by square wave anodic stripping voltammetry (SWASV) for the first time. The electrochemical parameters influencing on deposition and stripping of metal ions, such as supporting electrolytes, pH value, deposition potential and deposition time, were also optimized. The results showed that the Al₄SiC₄ modified GCE exhibited excellent stripping response of Cu²⁺ and the stripping peaks response increased linearly with increasing concentration of Cu²⁺ in the ranges of 400 to 2200 nM. Under the optimized conditions the favorable sensitivity of the Al₄SiC₄ modified GCE toward trace Cu²⁺ was 1.49 μA μM⁻¹ and the limit of detection (S/N=3) was estimated to be 2.76 nM. More importantly, Al₄SiC₄ modified GCE had an excellent stability and negligible interference from other coexisting metal ions in the electrochemical determination of Cu²⁺.     

Self-assembled films based on polypyrrole and carbon nanotubes composites for the determination of Diuron pesticide

In this work, polypyrrole (PPy) and its respective composite with functionalized multi-walled carbon nanotubes (MWCNT) were obtained by chemical polymerization of the monomer pyrrole in aqueous solution. The obtained PPy as well as its composite (PPy-MWCNT) were characterized by Fourier transform infrared spectroscopy (FTIR) and were used to produce nanostructured self-assembled (SA) films deposited onto glass substrates covered with indium tin oxide (ITO). The SA films were produced with alternated layers of polystyrene sulphonated (PSS) and were characterized by UV-visible, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analyses. The applicability of the SA films was evaluated by square wave voltammetry (SWV) with standard additions of aliquots of Diuron pesticide in Britton-Robinson buffer solutions (pH = 2.0). The results showed an oxidation peak at 0.23 V which increases in function of the Diuron concentration for both the SA films. It was also observed that the SA film based on the composite (PPy-MWCNT/PSS) showed a peak current intensity about ten times higher in comparison with its unmodified counterpart (PPy/PSS) for a Diuron concentration of 4.29 × 10^?5 mol L^?1, indicating a synergic effect between PPy and MWCNT in the composite. The limits of quantification (LOQ) and limits of detection (LOD) were respectively 8.6 × 10^?7 mol L^?1 and 2.6 × 10^?7 mol L^?1.