Incorporation of silver/carbon nanoparticles into poly(methyl methacrylate) via in situ miniemulsion polymerization and its influence on the glass‐transition temperature

Silver/carbon nanoparticles (9 nm) were incorporated, as reinforcements, into a matrix of poly(methyl methacrylate) via in situ miniemulsion polymerization. It was found by differential scanning calorimetry that the glass‐transition temperature of the poly(methyl methacrylate) showed an improvement of 14 °C with only 0.5 wt % nanoparticles in comparison with a pure poly(methyl methacrylate) control, which was also obtained by miniemulsion polymerization under the same conditions. This increase was related to a polymer chain mobility restriction due to a combination of bound plastic and joint plastic shell effects at the interphase and the surrounding regions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 511–518, 2007.     

Preparation of PMMA Nanoparticles Loaded with Benzophenone-3 through Miniemulsion Polymerization

Summary: The present paper analyzes the production of poly(methyl methacrylate) – PMMA – nanoparticles loaded with benzophenone-3 through miniemulsion polymerization. The obtained product is homogeneous and stable, allowing for preparation of photo-protective formulations. It is observed in particular that bezophenone-3 interacts with the reacting system, promoting the growth of the PMMA chains produced in miniemulsion.     

Synthesis of a photoactive gemini surfactant and its use in AGET ATRP miniemulsion polymerisation and UV curing

A novel photoactive gemini surfactant was easily synthesised in high yields. The multi-functional molecule can be used as a gemini surfactant, a benzophenone type photoinitiator, and as an ATRP initiator. Poly(methyl methacrylate) (PMMA) and poly(methyl methacrylate)-block-poly(allyl methacrylate) (PMMA-b-PAMA) were prepared using the photoactive gemini surfactant as an ATRP initiator under soap-free miniemulsion polymerisation conditions. Kinetic results of the miniemulsion polymerisation of methyl methacrylate (MMA) indicate that the reaction has controlled/living characteristics. UV curing was performed by irradiation of the linear PMMA-b-PAMA polymer, in which PMMA-b-PAMA containing a benzophenone moiety functioned as a macromolecular photoinitiator.     

Structure control in PMMA/silica hybrid nanoparticles by surface functionalization

Hydrophilic silica particles need to be hydrophobized to be encapsulated in a polymeric environment, which can be achieved by different methods. We report on the relationship between different hydrophobization techniques of silica and the final structure of poly(methyl methacrylate)/silica hybrid nanoparticles obtained by miniemulsion polymerization. Hydrophobization by cetyltrimethylammonium chloride (CTMA-Cl) uses the ionic interaction between the positively charged ammonium salt and the negatively charged silica surface, as shown by isothermal titration calorimetry. In this case, the interaction between polymer and silica surface needs to be enhanced, so 4-vinylpyridine (4-VP) was used as a co-monomer. Alternatively, the condensation reactions of 3-methacryloxypropyltrimethoxysilane (MPS) and octadecyltrimethoxysilane (ODTMS) were used to provide a covalent bond to the silica surface. The condensation reaction of the trimethoxysilane groups onto the silica surface was proven by Fourier transform infrared spectroscopy and thermogravimetric analysis. Hybrid nanoparticles were successfully formed with silica particles functionalized with the different functionalization agents. However, the structure of the resulting hybrid particles (i.e., the distribution of the silica particles within the polymer matrix) depends on the agent. The MPS-functionalized silica particles copolymerize with poly(methyl methacrylate), leading to a fixation of the silica particles inside the polymer and to a homogeneous distribution. The CTMA-Cl- and ODTMS-functionalized silica particles cannot copolymerize, but aggregate at the interface, leading to a Janus-like structure.     

Magnetic nanoparticles encapsulated latexes prepared with photo-initiated miniemulsion polymerization

This study describes the use of photo-initiated miniemulsion polymerization of methyl methacrylate and the incorporation of magnetic nanoparticles. With photo-initiator in the oil-in-water miniemulsion, UV irradiation led to the formation of polymer latexes after 15 min with the reaction temperature lower than 45 °C. Moreover, this method can be applied for the incorporation of magnetic nanoparticles. The particle sizes were measured by laser particle analyzer which showed narrow distributions. The morphology of the particles was examined with a transmission electron microscope and scanning electron microscope. The incorporation of magnetic nanoparticles was characterized with X-ray diffraction and vibrating sample magnetometer, both of which demonstrated that magnetic nanoparticles had been successfully incorporated into the polymer matrix.     

β-CD存在下MMA细乳液体系的RAFT聚合

近年来，活性自由基聚合已成为高分子合成领域中的一个热门课题．Rizzardo研究小组提出了一种新型活性自由基聚合反应，即RAFT(Reversible addition-fragmentation chain transfer)聚合．RAFT反应在传统的自由基聚合中加入了具有高链转移常数和特定结构的链转移剂——双硫酯类化合物．当链转移剂的浓度足够大时，链转移反应由不可逆变为可逆，聚合反应也随之发生质的变化，由不可控     

Surface modification and characterization of magnetic polymer nanospheres prepared by miniemulsion polymerization

A novel and effective protocol for the surface modification and quantitative characterization of magnetic polymeric nanospheres prepared by miniemulsion polymerization is reported. Composite nanospheres consisting of polymer-coated iron oxide nanoparticles were prepared by the miniemulsion polymerization of methyl methacrylate and divinylbenzene in the presence of magnetic fluid. Surface modification reaction of the magnetic polymer with poly(ethylene glycol) (PEG) was employed to obtain a hydrophilic hydroxyl-group-functionalized magnetic nanospheres. An affinity dye, Cibacron blue F3G-A (CB), was then coupled covalently to prepare a magnetic nonporous affinity adsorbent. The morphology and magnetic property of the polymer nanospheres obtained were examined by transmission electron microscopy and a vibrating sample magnetometer. The contents of surface groups modified were quantitatively measured by using diffusive reflectance Fourier transform infrared spectroscopy on the basis of a linear relationship between the intensity ratio of IC-O-C/IC=O and the content of PEG. X-ray photoelectron spectroscopy (XPS) was used to examine the surface of magnetic nanospheres. It was confirmed by the comparison of XPS spectra of both dye-coated and uncoated magnetic nanospheres to which the CB ligand was coupled, and the surface of the PEG-modified nanospheres had an exact 3:7 atomic ratio of sulfur to nitrogen.     

Block copolymer mediated synthesis of amphiphilic gold nanoparticles in water and an aqueous tetrahydrofuran medium: An approach for the preparation of polymer–gold nanocomposites

The synthesis of polymer‐matrix‐compatible amphiphilic gold (Au) nanoparticles with well‐defined triblock polymer poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] and diblock polymers poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], polystyrene‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], and poly(t‐butyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] in water and in aqueous tetrahydrofuran (tetrahydrofuran/H₂O = 20:1 v/v) at room temperature is reported. All these amphiphilic block copolymers were synthesized with atom transfer radical polymerization. The variations of the position of the plasmon resonance band and the core diameter of such block copolymer functionalized Au particles with the variation of the surface functionality, solvent, and molecular weight of the hydrophobic and hydrophilic parts of the block copolymers were systematically studied. Different types of polymer–Au nanocomposite films [poly(methyl methacrylate)–Au, poly(t‐butyl methacrylate)–Au, polystyrene–Au, poly(vinyl alcohol)–Au, and poly(vinyl pyrrolidone)–Au] were prepared through the blending of appropriate functionalized Au nanoparticles with the respective polymer matrices {e.g., blending poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate‐stabilized Au with the poly(methyl methacrylate)matrix only}. The compatibility of specific block copolymer modified Au nanoparticles with a specific homopolymer matrix was determined by a combination of ultraviolet–visible spectroscopy, transmission electron microscopy, and differential scanning calorimetry analyses. The facile formation of polymer–Au nanocomposites with a specific block copolymer stabilized Au particle was attributed to the good compatibility of block copolymer coated Au particles with a specific polymer matrix. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1841–1854, 2006     

Synthesis of block copolymer-stabilized Au-Ag alloy nanoparticles and fabrication of poly(methyl methacrylate)/Au-Ag nanocomposite film

[Poly(2-(N,N-dimethylamino)ethyl methacrylate)]-b-poly(methyl methacrylate)-b-[poly(2-(N,N-dimethylamino)ethyl methacrylate)] (M(n)=45,000; 20K-5K-20K; PDI = 1.2) block copolymer surfactant stabilized amphiphilic gold-silver alloy nanoparticles (Au-Ag(PDMA-b-PMMA-b-PDMA)) has been synthesized in both water and in organic medium. The block copolymer stabilized pre-made alloy nanoparticles were successfully dispersed in hydrophobic poly(methyl methacrylate) homopolymer matrix (PMMA) of molecular weight 30,000. The successful synthesis of alloy nanoparticles was accessed by Transmission Electron Microscope (TEM), Energy Dispersed X-ray (EDX), and UV-visible spectrophotometric analysis. The surface functionality of the nanoparticles was confirmed by quantitative determining the grafting density of polymer chain around the nanoparticle surface using combination of thermo gravimetric (TGA) and TEM analysis. The hydrodynamic diameter of the alloy particles including the polymer chains was obtained from dynamic light scattering measurement (DLS). The mechanism of synthesis of high concentration of Au-Ag alloy particles from HAuCl(4) and AgNO(3) (in presence of Cl(-) from reduction of gold salt) metal particles precursors and the successful preparation of poly(methyl methacrylate)/gold-silver nanocomposite films have been discussed.     

Synthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate) particles and their kinetic behavior in miniemulsion polymerization

Phosphonate-functionalized polymer nanoparticles were synthesized by free-radical copolymerization of vinylphosphonic acid (VPA) with styrene or methyl methacrylate (MMA) using the miniemulsion technique. The influence of different parameters such as monomer and surfactant type, amount of vinylphosphonic acid on the average particle size, and size distribution was studied using dynamic light scattering and transmission electron microscopy. Depending on the amount and type of the surfactant used (ionic or non-ionic), phosphonate-functionalized particles in a size range from 102 to 312 nm can be obtained. The density of the phosphonate groups on the particle surface was higher in the case of using MMA as a basis monomer than polystyrene. The kinetic behavior of VPA copolymerization with styrene or MMA using a hydrophobic initiator was investigated by reaction calorimetry. Different kinetic curves were observed for miniemulsion (co)polymerization of styrene- and MMA-based nanoparticles indicating different nucleation mechanisms.     

Motion of integrated CdS nanoparticles by phase separation of block copolymer brushes

A new method of reversibly moving CdS nanoparticles in the perpendicular direction was developed on the basis of the phase separation of block copolymer brushes. Polystyrene-b-(poly(methyl methacrylate)-co-poly(cadmium dimethacrylate)) (PS-b-(PMMA-co-PCdMA)) brushes were grafted from the silicon wafer by surface-initiated atom transfer radical polymerization (ATRP). By exposing the polymer brushes to H2S gas, PS-b-(PMMA-co-PCdMA) brushes were converted to polystyrene-b-(poly(methyl methacrylate)-co-poly(methacrylic acid)(CdS)) (PS-b-(PMMA-co-PMAA(CdS))) brushes, in which CdS nanoparticles were chemically bonded by the carboxylic groups of PMAA segment. Alternating treatment of the PS-b-(PMMA-co-PMAA(CdS)) brushes by selective solvents for the outer block (a mixed solvent of acetone and ethanol) and the inner PS block (toluene) induced perpendicular phase separation of polymer brushes, which resulted in the reversible lifting and lowering of CdS nanoparticles in the perpendicular direction. The extent of movement can be adjusted by the relative thickness of two blocks of the polymer brushes.     

Comparative study of classical surfactants and polymerizable surfactants (surfmers) in the reversible addition–fragmentation chain transfer mediated miniemulsion polymerization of styrene and methyl methacrylate

Cationic and anionic amphiphilic monomers (surfmers) were synthesized and used to stabilize particles in miniemulsion polymerization. A comparative study of classical cationic and anionic surfactants and the two surfmers was conducted with respect to the reaction rates and molecular weight distributions of the formed polymers. The reversible addition–fragmentation chain transfer process was used in the miniemulsion polymerization reactions to control the molecular weight distribution. The reaction rates of the surfmer‐stabilized miniemulsion polymerization of styrene and methyl methacrylate were similar (in most cases) to those of the classical‐surfactant‐stabilized miniemulsion polymerizations. The final particle sizes were also similar for polystyrene latexes stabilized by the surfmers and classical surfactants. However, poly(methyl methacrylate) latexes stabilized by the surfmers had larger particle sizes than latexes stabilized by classical surfactants. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 427–442, 2006     

Morphology control in polystyrene/poly(methyl methacrylate) composite latex particles

The effect of the presence of different amounts of block copolymers [polystyrene-block-poly(methyl methacrylate)] on the morphology of polystyrene/poly (methyl methacrylate) composite latex particles was investigated. The block copolymers were produced in situ by controlled radical polymerization (CRP) through the addition of the second monomer to a seed prepared by miniemulsion polymerization with a certain amount of a CRP agent. With an increase in the amounts of the block copolymers, the particle morphology changed from a hemisphere morphology (for a latex without block copolymers, i.e., without the use of a CRP agent during the polymerization) to clear core–shell morphologies as a result of decreasing polymer–polymer interfacial tension © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2484–2493, 2007     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

Miniemulsion polymerization of styrene with a block copolymer surfactant

A series of miniemulsion systems based on styrene/azobisisobutyronitrile in the presence of poly(methyl methacrylate‐b‐2‐(dimethylamino)ethyl methacrylate) as a surfactant and hexadecane (HD) as a cosurfactant were developed. For comparison, a series of pseudoconventional emulsions also were carried out with the same procedure used for the aforementioned series but without the cosurfactant (HD). Both the droplet size and shelf life were also measured. Experimental results indicate that it is possible to slow the effect of Ostwald ripening and thereby produce a stable miniemulsion with the block copolymer as the surfactant and HD as the cosurfactant. In addition, the extent to which varying the surfactant concentration and copolymer composition could affect both the polymer particle size during the polymerization and the polymerization rate was examined. Variation in the polymer particle sizes during polymerization indicates that droplet and aqueous (micellar or both homogeneous) nucleation occurs in the miniemulsion polymerization. With the same concentration of the surfactant used in the miniemulsion polymerization, the polymerization rates of systems with M₁₂B₃₆ are faster than those of systems with M₁₂B₁₂. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1818–1827, 2000     

Preparation of Poly(methyl methacrylate) Nanoparticles 15–50 nm in Diameter from Submicrometer-Sized Latex Particles

Russian Journal of Applied Chemistry - A procedure was developed for preparing poly(methyl methacrylate) nanoparticles of 15–50 nm size from coarser (200–300 nm) polymer latex particles...     

Silica nanoparticle covered with mixed polymer brushes as Janus particles at water/oil interface

Silica nanoparticles (NSiO₂) are modified with mixed polymer brushes derived from a block copolymer precursor, poly(methyl methacrylate)-b-poly(glycidyl methacrylate)-b-poly(tert-butyl methacrylate) with short middle segment of PGMA, through one step ??grafting-onto?? approach. The block polymer precursors are prepared via reversible addition?Cfragmentation chain transfer-based polymerization of methyl methacrylate, glycidyl methacrylate, and tert-butyl methacrylate. The grafting is achieved by the reaction of epoxy group in short PGMA segment with silanol functionality of silica. After hydrolysis of poly(tert-butyl methacrylate) segment, amphiphilic NSiO₂ with ??V-shaped?? polymer brushes possessing exact 1:1 molar ratio of different arms were prepared. The functionalized particles self-assemble at oil/water interfaces to form stable large droplets with average diameter ranging from 0.15?±?0.06 to 2.6?±?0.75?mm. The amphiphilicity of the particles can be finely tuned by changing the relative lengths of poly(methyl methacrylate) and poly(methacrylic acid) segments, resulting in different assembly behavior. The method may serve as a general way to control the surface property of the particles.     

Preparation of magnetic polymer colloids with Brownian magnetic relaxation

Magnetic polymer colloids (MPCs) consisting of CoFe₂O₄ nanoparticles (NPs) embedded in a poly(methyl methacrylate) (PMMA) matrix were synthesized by magnetic miniemulsion polymerization. CoFe₂O₄ NPs were modified with 3-trimethoxysilylpropylmethacrylate and directly emulsified with different concentrations of sodium dodecyl sulfate under ultrasonication for subsequent miniemulsion polymerization. The average diameter of the CoFe₂O₄/PMMA spheres (about 200 nm) was controlled by varying the amount of surfactant. Thermogravimetric analysis indicated that the magnetic content was in the range of 44 to 73 %. Magnetic properties of the dispersions were investigated by measuring equilibrium magnetization curves and the dynamic magnetic susceptibility as a function of frequency. The MPCs were found to follow the Debye model for the dynamic magnetic susceptibility, with a characteristic time given by the rotational hydrodynamic resistance and thermal energy through the Stokes-Einstein relation. This demonstrates that the MPCs respond to applied magnetic fields by rotating. Due to their uniform size and high magnetic loading, these colloids may be suitable in a variety of applications, including nanoscale mechanical probes and actuators in complex fluids and biological systems.     

Characterization of poly(methyl methacrylate) nanofiber mats by electrospinning process

In this study, the aim is to describe the influence of electrospinning parameters on the morphology, the water wetting property and dye adsorption property of poly(methyl methacrylate) nanofiber mats. Specifically, the effects of solution concentration, solvent type, applied voltage, distance between the electrodes and particulate reinforcement on the diameter and shape of the nanofibers were investigated. All poly(methyl methacrylate) nanofiber mats contained beaded nanofiber structures. With increasing the polymer solution concentration, the average fiber diameter also increased. Poly(methyl methacrylate) nanofiber mat electrospun from dimethylformamide solution resulted in thicker fibers when compared with the mat electrospun from acetone solution. Increasing the electric potential difference between the collector and the syringe tip did not increase the average fiber diameter. Besides increasing the distance between the electrodes resulted in a decrease in the average fiber diameter. When compared with PMMA nanofiber mat, thicker fibers were obtained with silica nanoparticles reinforced nanofiber mat. According to the water contact angle measurements, all poly(methyl methacrylate) nanofiber mats revealed hydrophobic surface property. PMMA nanofiber mat with the highest water contact angle gave rise to the highest dye adsorption capacity.