How does the nickel pincer complex catalyze the conversion of CO2 to a methanol derivative? A computational mechanistic study

The mechanistic details of nickel-catalyzed reduction of CO(2) with catecholborane (HBcat) have been studied by DFT calculations. The nickel pincer hydride complex ({2,6-C(6)H(3)(OP(t)Bu(2))(2)}NiH = [Ni]H) has been shown to catalyze the sequential reduction from CO(2) to HCOOBcat, then to CH(2)O, and finally to CH(3)OBcat. Each process is accomplished by a two-step sequence at the nickel center: the insertion of a C═O bond into [Ni]H, followed by the reaction of the insertion product with HBcat. Calculations have predicted the difficulties of observing the possible intermediates such as [Ni]OCH(2)OBcat, [Ni]OBcat, and [Ni]OCH(3), based on the low kinetic barriers and favorable thermodynamics for the decomposition of [Ni]OCH(2)OBcat, as well as the reactions of [Ni]OBcat and [Ni]OCH(3) with HBcat. Compared to the uncatalyzed reactions of HBcat with CO(2), HCOOBcat, and CH(2)O, the nickel hydride catalyst accelerates the H(δ-) transfer by lowering the barriers by 30.1, 12.4, and 19.6 kcal/mol, respectively. In general, the catalytic role of the nickel hydride is similar to that of N-heterocyclic carbene (NHC) catalyst in the hydrosilylation of CO(2). However, the H(δ-) transfer mechanisms used by the two catalysts are completely different. The H(δ-) transfer catalyzed by [Ni]H can be described as hydrogen being shuttled from HBcat to nickel center and then to the C═O bond, and the catalyst changes its integrity during catalysis. In contrast, the NHC catalyst simply exerts an electronic influence to activate either the silane or CO(2), and the integrity of the catalyst remains intact throughout the catalytic cycle. The comparison between [Ni]H and Cp(2)Zr(H)Cl in the stoichiometric reduction of CO(2) has suggested that ligand sterics and metal electronic properties play critical roles in controlling the outcome of the reaction. A bridging methylene diolate complex has been previously observed in the zirconium system, whereas the analogous [Ni]OCH(2)O[Ni] is not a viable intermediate, both kinetically and thermodynamically. Replacing HBcat with PhSiH(3) in the nickel-catalyzed reduction of CO(2) results in a high kinetic barrier for the reaction of [Ni]OOCH with PhSiH(3). Switching silanes to HBcat in NHC-catalyzed reduction of CO(2) generates a very stable NHC adduct of HCOOBcat, which makes the release of NHC less favorable.     

Competition between alkenes in intramolecular ketene-alkene [2 + 2] cycloaddition: what does it take to win?

In the course of developing a new synthetic methodology using ketenes in sequential cycloaddition steps, we were faced with a competition problem with molecules containing a ketene tethered to more than one reacting partner. To pinpoint the electronic and tethering requirements for a chemoselective reaction, we undertook a series of ketene-alkene [2 + 2] cycloaddition competition experiments. Those experiments were conducted on molecules containing either two identical alkenes having different tether lengths or two alkenes having the same tether length but being electronically different. We demonstrated that the reaction is much faster for forming five-membered rings than six-membered rings and calculated the Hammett constant rho for intramolecular ketene-alkene [2 + 2] cycloadditions to be -1.39.     

A study on the essential oil of Ferulago campestris: How much does extraction method influence the oil composition?

The essential oil of different parts of Ferulago campestris (Bess.) collected in Sicily has been extracted by microwave-assisted hydrodistillation (MAHD) and by classic hydrodistillation (HD). A comparative qualitative-quantitative study on the composition of the oils was carried out. A total of 100 compounds were identified in the oils obtained by MAHD, whereas 88 compounds characterized the HD oils. The most prominent components were, in all different parts of F. campestris and in both extraction methods, 2,4,5-trimethylbenzaldehyde and 2,4,6-trimethylbenzaldehyde isomers; the latter was not previously found. The attempt to evaluate where the oil components are located in all parts of the plant was carried out by means of a kinetic study. Then, electron microscopy observation on the different parts before and after MAHD and HD was performed.     

How and when does an unusual and efficient photoredox reaction of 2-(1-hydroxyethyl) 9,10-anthraquinone occur? A combined time-resolved spectroscopic and DFT study

The photophysics and photochemical reactions of 2-(1-hydroxyethyl) 9,10-anthroquinone (2-HEAQ) were studied using femtosecond transient absorption (fs-TA), nanosecond transient absorption (ns-TA), and nanosecond time-resolved resonance Raman (ns-TR(3)) spectroscopy techniques and density functional theory (DFT) calculations. In acetonitrile, 2-HEAQ underwent efficient intersystem crossing to the triplet excited state ((2-HEAQ)(3)). A typical photoreduction reaction for aromatic ketones took place via production of a ketyl radical intermediate for 2-HEAQ in isopropanol. In water-containing solutions with pH values between 2 and 10, an unusual photoredox reaction reported by Wan and co-workers was detected and characterized. Observation of the protonated species in neutral and acidic aqueous solutions by fs-TA spectra indicated the carbonyl oxygen of (2-HEAQ)(3) was protonated initially and acted as a precursor of the photoredox reaction. The preference of the photoredox reaction to occur under moderate acidic conditions compared to neutral condition observed using ns-TR(3) spectroscopy was consistent with results from DFT calculations, which suggested protonation of the carbonyl group was the rate-determining step. Under stronger acidic conditions (pH 0), although the protonated (2-HEAQ)(3) was formed, the predominant reaction was the photohydration reaction instead of the photoredox reaction. In stronger basic solutions (pH 12), (2-HEAQ)(3) decayed with no obvious photochemical reactions detected by time-resolved spectroscopic experiments. Reaction mechanisms and key reactive intermediates for the unusual photoredox reaction were elucidated from time-resolved spectroscopy and DFT results. A brief discussion is given of when photoredox reactions may likely take place in the photochemistry of aromatic carbonyl-containing compounds and possible implications for using BP and AQ scaffolds for phototrigger compounds.     

How different is pyrimidine as a core component of DNA base from its diazine isomers: A DFT study?

Recent photoemission spectroscopic (X‐ray photoemission spectra) study revealed less dramatic chemical changes for pyrimidine (PyM, 1, 3‐diazine) with in its ionization potential. Present systematic study using density functional theory calculations shows that PyM is indeed quite different from its diazine isomers (PyD, 1, 2‐diazine and PyA, 1, 4‐diazine). It is discovered that the most stable isomer PyM is relaxed from C_2V to C₁ point symmetry with a total electronic energy deduction of ?15.86 kcal.mol^?1. Although not substantial, PyM has the smallest molecule shape (electronic spatial extent) and the largest HOMO‐LUMO energy gap of 5.65 eV; only one absorption band in the region of 200–300 nm of the UV‐Vis spectrum but three clusters of chemical shift in the carbon and hydrogen NMR spectra. The energy decomposition analyses revealed that the interaction energy (ΔE_Int) of PyM is preferred over PyA by 4.08 kcal.mol^?1 and over PyD by 22.32 kcal.mol^?1, with the preferred N? C? N bond revealed by graph theory.     

How does the critical point change during a chemical reaction in supercritical fluids? A study of the hydroformylation of propene in supercritical CO(2).

An understanding of homogeneous catalysis in supercritical fluids requires a knowledge of the phase behavior and the variation in critical point as the reaction proceeds. In this paper, the critical temperatures, T(c) and pressures, P(c), have been measured for a considerable number of mixtures representing the various stages of the hydroformylation reaction of propene in supercritical CO(2) and different reactant concentrations. Critical point data have also been measured for all of the binary mixtures of the components (CO(2), H(2), CO, propene, n- and isobutyraldehyde) which are not available from the literature or can be deduced from published data. We use the stoichiometry of the reacting system to simplify greatly the phase behavior problem by defining a path through the otherwise multidimensional "phase space". Satisfactory modeling of the data (0.3% in T(c) and 3.0% in P(c)) has been achieved using the Peng-Robinson equation of state and ignoring all binary interactions which do not involve CO(2). The model is used to explore the strategies needed to avoid phase separation in continuous and batch reactions. At a given temperature, a batch reactor may need to be run under much higher pressures than a flow reactor if single-phase conditions are to be preserved throughout the course of the reaction. Most of the critical point data were measured acoustically, but a selection of points were validated using more traditional view-cell procedures.     

A rapid UHPLC–MS/MS method for the quantification of ARQ531 in rat plasma: Validation and its application to a pharmacokinetic study

A simple and sensitive ultra-high performance liquid chromatography–tandem mass spectrometric (UHPLC–MS/MS) method was developed and validated for the determination of ARQ531, a Bruton’s tyrosine kinase inhibitor in rat plasma. After protein precipitation with acetonitrile, the samples were separated on a UPLC BEH C₁₈ column with 0.1% formic acid in water and acetonitrile as mobile phase at a flow rate of 0.4 ml/min. The mass detection was performed on a triple quadrupole tandem mass spectrometer by multiple reaction monitoring with precursor-to-product ion transitions of m/z 479.1 > 365.1 and m/z 441.2 > 138.1 for ARQ531 and internal standard, respectively. Good linearity (correlation coefficient > 0.9988) was achieved over the concentration range of 0.5–1,000 ng/ml and the lower limit of quantitation was 0.5 ng/ml. The accuracy ranged from −13.50 to 11.35% and the precision was <8.87%. The extraction recovery was >85.56%. ARQ531 was demonstrated to be stable under the tested conditions. The validated method was further applied to a pharmacokinetic study of ARQ531 in rats after intravenous (1 mg/kg) and oral (1, 3 and 10 mg/kg) administration. The results demonstrated that ARQ531 displayed linear pharmacokinetic profiles over the oral dose range of 1–10 mg/kg and good oral bioavailability (>50%).     

ChemInform Abstract: Is it Possible to Synthesize a Neutral Noble Gas Compound Containing a Ng—Ng Bond? A Theoretical Study of H—Ng—Ng—F (Ng: Ar,Kr, Xe).

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Cholesteric bonded stationary phases for high-performance liquid chromatography: synthesis, physicochemical characterization, and chromatographic behavior of a phospho–cholesteric bonded support. A new way to mimic drug/membrane interactions?

Among the various methods exploitable to determine the bioavailability of drugs, reversed-phase liquid chromatography (RPLC) appears to be suited to creation of patterns of prediction. In this context a new stationary phase was designed in this work to reproduce, in terms of chemical structure, as accurately as possible, the main elements of cellular membranes; which include phospholipids and cholesterol molecules. An efficient synthetic pathway was developed to prepare ligands that contain a phosphate head, a long alkyl chain chemically bonded to silica, and a cholesteric moiety, in order to mimic both hydrophilic and hydrophobic interactions, and "membrane-like" organization, respectively. The new stationary phase was characterized by Fourier-transform infra red (FTIR) and (1)H-(13)C, (1)H-(31)P, and (1)H-(29)Si cross-polarization magic-angle-spinning nuclear magnetic resonance (CP MAS NMR) spectroscopy. Its chromatographic behavior has been studied by classical classification tests for RPLC columns. Despite its low surface coverage, the material produced exhibits high shape selectivity, possibly due to the organization of the grafted moieties.