Properties of amorphous calcium carbonate and the template action of vaterite spheres

The fast mixing of aqueous solutions of calcium chloride and sodium carbonate could immediately result in amorphous calcium carbonate (ACC). Under vigorous stirring, the formed ACC in the precipitation system will dissolve first and, then, transform within minutes to produce crystalline forms of vaterite and calcite. After that, the solution-mediated mechanism dominates the transformation of the thermodynamically unstable vaterite into the thermodynamically stable calcite. Although ACC is the least stable form of the six anhydrous phases of calcium carbonate (CaCO(3)), it could be, however, produced and stabilized by a variety of organisms. To better understand the formation-transformation mechanism of ACC and vaterite into calcite, ex-situ methods (i.e., scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction spectroscopy) were used to characterize the formation-transformation process of ACC and vaterite in aqueous systems without organic additives, showing that ACC sampled at different conditions has different properties (i.e., lifetime, morphology, and spectrum characterization). It is also very interesting to capture the obviously polycrystalline particles of CaCO(3) during the transformation process from vaterite to calcite, which suggests the formation mechanism for the calcite superstructure with multidimensional morphology.     

Crystallization and aggregation behaviors of calcium carbonate in the presence of poly(vinylpyrrolidone) and sodium dodecyl sulfate

An anionic surfactant interacts strongly with a polymer molecule to form a self-assembled structure, due to the attractive force of the hydrophobic association and electrostatic repulsion. In this crystallization medium, the surfactant-stabilized inorganic particles adsorbed on the polymer chains, as well as the bridging effect of polymer molecules, controlled the aggregation behavior of colloidal particles. In this presentation, the spontaneous precipitation of calcium carbonate (CaCO3) was conducted from the aqueous systems containing a water-soluble polymer (poly(vinylpyrrolidone), PVP) and an anionic surfactant (sodium dodecyl sulfate, SDS). When the SDS concentrations were lower than the onset of interaction between PVP and SDS, the precipitated CaCO3 crystals were typically hexahedron-shaped calcite; the increasing SDS concentration caused the morphologies of CaCO3 aggregates to change from the flower-shaped calcite to hollow spherical calcite, then to solid spherical vaterite. These results indicate that the self-organized configurations of the polymer/surfactant supramolecules dominate the morphologies of CaCO3 aggregates, implying that this simple and versatile method expands the morphological investigation of the mineralization process.     

Evolution Mechanism of Calcium Carbonate in Solution

Calcium carbonate was synthesized in a CaCl₂/NaCO₃ mixed solution by using ethylenedi-aminetetraacetic acid (EDTA) as an additive. The thermodynamics and kinetics analyses indicate that although the driving force of amorphous calcium carbonate (ACC) precipi-tation is always less than that of calcite and vaterite precipitation, the nucleation rate of ACC is greater than that of calcite and vaterite at the initial stage of the precipitation reaction. With the increasing incubation time, vaterite and calcite particles nucleate het-erogeneously by using the as-formed particles as active sites. Scanning electron microscopyimages indicate that the transformation mechanism of ACC and vaterite to calcite is the dissolution-recrystallisation reaction. The presence of EDTA not only improves the stabil-ities of ACC and vaterite, but also leads to forming enlongated, connected rhombohedralcalcite crystals after incubation 7 days in solutions. The ACC and vaterite are stabler in air than in solutions at room temperature, although the dissolution-recrystallisation reaction occurs on the surface.     

Nucleation of calcium carbonate as polymorphic crystals in the presence of lipid A-diphosphate

The well-defined structure of lipid A-diphosphate in aqueous solutions provides a way of observing the formation of calcium carbonate crystals. The crystals are either tetrahedral or rhombohedral calcite at a volume fraction of phi = 5.4 x 10 (-4) at pH 5.8 or the vaterite polymorph of CaCO(3) at a volume fraction of phi = 7.8 x 10 (-4) at pH 5.8. In both cases, nucleation, adsorption pH, and the shape-dependent template of lipid A-diphosphate control the formation of the calcite and vaterite.     

P(St-co-MAA)乳液体系对CaCO3结晶的调控

大量研究表明, 有机/无机界面上的相互作用[1]是控制无机结晶的晶型、形貌、粒径等特征的决定因素. 本文利用乳液聚合方法合成了在诱导无机矿化后依然保持较为刚性界面的、能与无机离子作用的微球, 并在乳液中进行碳酸钙结晶实验, 用XRD, FTIR和SEM等手段对结晶进行了表征.     

Formation of stable vaterite with poly(acrylic acid) by the delayed addition method

The crystallization of CaCO3 was examined by changing the addition time of poly(acrylic acid) (PAA) to an aqueous solution of calcium carbonate by selectively interacting with the crystal at different stages during the crystal-forming process. The precipitation of CaCO3 was carried out by a double jet method to prevent heterogeneous nucleation on glass walls, and the sodium salt of PAA was added by a delayed addition method. In the initial presence of PAA in an aqueous solution of calcium carbonate, PAA acted as an inhibitor for the nucleation and growth of crystallization. However, it was found that stable vaterite particles were successfully obtained by delaying the addition of PAA from 1 to 60 min. The vaterite particles were stable in the aqueous solution for more than 30 days, and the CaCO3 particles were formed by a spherulitic growth mechanism. It is suggested that PAA strongly binds with the Ca2+ ion on the surface of CaCO3 particles to stabilize the unstable vaterite form effectively. Upon changing the addition time of PAA, we found that CaCO3 particles were formed through different formation mechanisms in selectively controlled crystallization at different stages during the crystallization process.     

Crystallization and Transformation Mechanism of Calcium Carbonate Polymorphs and the Effect of Magnesium Ion

The crystallization of calcium carbonate was carried out by mixing CaCl(2) and Na(2)CO(3) solutions. The morphology of precursor formed prior to the nucleation of the polymorphous crystals (calcite and vaterite) varies depending on the feed concentration. The faster nucleation rate of polymorphous crystals in 0.2 mol/L than in 0.05 mol/L solution results in the prompt disappearance of the precursor at 0.2 mol/L. In 0.05 mol/L solutions the lifetime of the precursor is relatively long. The crystallization fraction of vaterite increases with the feed concentration and decreases with the addition rate of Na(2)CO(2) solution. Vaterite takes on the various morphologies of the aggregates of the primary flocculation body (spherulite) depending on the crystallization conditions. Vaterite transforms to calcite by a direct solution-mediated mechanism. During crystallization the concentration attains a stationary value, which increases with the feed concentration and decreases with the addition rate of Na(2)CO(2) solution. This may be due to the crystal size decrease expected from the Gibbs-Kelvin equation. Magnesium ion suppresses the transformation of vaterite by inhibiting the growth of the calcite. Magnesium ion is selectively included in calcite and causes the increase of the attained concentration and the remarkable change in the morphology of calcite especially in 0.05 mol/L solution. Copyright 2001 Academic Press.     

Calcium carbonate phase transformations during the carbonation reaction of calcium heavy alkylbenzene sulfonate overbased nanodetergents preparation

The preparation and application of overbased nanodetergents with excess alkaline calcium carbonate is a good example of nanotechnology in practice. The phase transformation of calcium carbonate is of extensive concern since CaCO(3) serves both as an important industrial filling material and as the most abundant biomineral in nature. Industrially valuable overbased nanodetergents have been prepared based on calcium salts of heavy alkylbenzene sulfonate by a one-step process under ambient pressure, the carbonation reaction has been monitored by the instantaneous temperature changes and total base number (TBN). A number of analytical techniques such as TGA, DLS, SLS, TEM, FTIR, and XRD have been utilized to explore the carbonation reaction process and phase transformation mechanism of calcium carbonate. An enhanced understanding on the phase transformation of calcium carbonate involved in calcium sulfonate nanodetergents has been achieved and it has been unambiguously demonstrated that amorphous calcium carbonate (ACC) transforms into the vaterite polymorph rather than calcite, which would be of crucial importance for the preparation and quality control of lubricant additives and greases. Our results also show that a certain amount of residual Ca(OH)(2) prevents the phase transformation from ACC to crystalline polymorphs. Moreover, a vaterite nanodetergent has been prepared for the first time with low viscosity, high base number, and uniform particle size, nevertheless a notable improvement on its thermal stability is required for potential applications.     

Calcium carbonate solubility: a reappraisal of scale formation and inhibition

Considerable disparity exists in the published thermodynamic data for selected species in the Ca(2+) /CO(2)/H(2)O system near 25 degrees C and 1 atm pressure. Some authors doubt the significance of CaCO(3)(0)aq) complexes although there is experimental evidence of their occurrence. Evaluation of all the published experimental and estimated data for aqueous calcium carbonate species confirms that the consistent set of constants given by Plummer and Busenberg in 1982 is the best available, and suggests a formation constant log beta = 3.22 for CaCO(3)(0)(aq). This value was confirmed by additional experimental data and calculations using a specially developed computer program. The solubility s and solubility product K(s) are critically evaluated for each solid polymorph (amorphous CaCO(3), ikaite, vaterite, aragonite and calcite) using a hydrated ion pair model and we give coherent explanations for the calcium carbonate precipitation/dissolution process and the existence of supersaturated waters. The practical cases of scale formation and its inhibition by phosphonate-type compounds are discussed and explained with the same model, taking into account the CaCO(3)(0)(aq) species.     

Early homogenous amorphous precursor stages of calcium carbonate and subsequent crystal growth in levitated droplets

An in situ study of the contact-free crystallization of calcium carbonate in acoustic levitated droplets is reported. The levitated droplet technique allows an in situ monitoring of the crystallization while avoiding any foreign phase boundaries that may influence the precipitation process by heterogeneous nucleation. The diffusion-controlled precipitation of CaCO3 at neutral pH starts in the initial step with the homogeneous formation of a stable, nanosized liquid-like amorphous calcium carbonate phase that undergoes in a subsequent step a solution-assisted transformation to calcite. Cryogenic scanning electron microscopy studies indicate that precipitation is not induced at the solution/air interface. Our findings demonstrate that a liquid-liquid phase separation occurs at the outset of the precipitation under diffusion-controlled conditions (typical for biomineral formation) with a slow increase of the supersaturation at neutral pH.     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

Influence of the primary structure of enzymes on the formation of CaCO2 polymorphs: a comparison of plant (Canavalia ensiformis) and bacterial (Bacillus pasteurii) ureases

The influence of the primary structures of plant (Canavalia ensiformis) and bacterial (Bacillus pasteurii) ureases on the precipitation of calcium carbonate polymorphs in solutions of calcium salts and urea at room temperature was investigated. Despite a similar catalytic function in the decomposition of urea, these ureases exerted different influences on the crystal phase formation and on the development of unusual morphologies of calcium carbonate polymorphs. Spherical and uniform vaterite particles were precipitated rather than calcite in the presence of Bacillus urease, while the presence of Canavalia urease resulted in the precipitation of calcite only. Vaterite particles were shown to be built up of nanosized crystallites, proving the importance of nanoscale aggregation processes on the formation of colloidal carbonates. Reduction of the concentration of Bacillus urease in the reacting solution results in the formation of calcite crystals with a more complex surface morphology than the ones obtained by Canavalia urease. These differences may be explained by dissimilarities in the amino acid sequences of the two examined ureases and their different roles in nucleation and physicochemical interactions with the surface of the growing crystals, during the precipitation processes. This study exemplifies the diversity of proteins produced by different organisms for the same function, and the drastic effects of subtle differences in their primary structures on crystal phase formation and growth morphology of calcium carbonate precipitates, which occur as inorganic components in a large number of biogenic structures.     

Morphological control of calcium carbonate crystallized in reverse micelle system with anionic surfactants SDS and AOT

The influence of a surfactant over water on the polymorphism and crystal size of calcium carbonate produced by reaction crystallization in microemulsion systems was investigated in a mixing tank reactor. The crystallization was induced by the reaction between two aqueous micelle solutions (Na2CO3-CaCl2) stabilized by anionic surfactants, SDS (sodium dodecyl sulfate) or AOT (sodium bis(2-ethylhexyl) sulfosuccinate). With increasing surfactant ratio to water, the water-in-oil microemulsion was stably developed and the morphology of the calcium carbonate crystallized in the micelles sharply transformed from calcite to vaterite. The influence of SDS on the polymorphism and crystal size of calcium carbonate was much clearer than that of AOT. In addition, with AOT, certain step changes in the morphology and crystal size occurred around a surfactant ratio to water (R=[H2O]/[surfactant]) of 15 due to a two-phase separation of the microemulsion.     

Oriented aggregation and novel phase transformation of vaterite controlled by the synergistic effect of calcium dodecyl sulfate and n-pentanol

Calcium dodecyl sulfate (CDS) was used for the first time both as an anionic surfactant and as the source of mineral ions in the precipitation process of calcium carbonate (CaCO3). The simple reaction of the enriched Ca2+ ions at the so-called organic-inorganic interfaces with the slowly bubbled CO2 gas resulted in the metastable vaterite polymorph with various structures. The single-crystalline vaterite of the hexagonal platelets, the lens-shaped structures with hexagonal symmetry, the olive-shaped superstructures and these with a concave at each top of olives, and another metastable polymorph of aragonite were obtained, respectively, depending upon the concentration ratio between CDS and n-pentanol. The synergistic effect of CDS and n-pentanol is believed to play a crucial role in driving the oriented aggregation of metastable nanoparticles. Simultaneously, the novel phase transformation of vaterite to aragonite was observed, implying the possible formation mechanism of aragonite at room temperature and in the absence of magnesium ions.     

Formation of rod-shaped calcite crystals by microemulsion-based synthesis

Novel rod-shaped calcite crystals are formed by precipitation from cetyltrimethylammonium bromide (CTAB)/1-pentanol/cyclohexane microemulsions containing calcium chloride and ammonium carbonate. The calcium carbonate initially precipitates as hexagon-shaped vaterite crystals. The vaterite crystals transform to unusual rod-shaped calcite crystals over several days. The rod-shaped calcite crystals are prismatic, with the longest crystal axis displaying (110) crystal faces. A possible mechanism of crystal growth is discussed. The elongated shape of the crystals facilitates the assembly into hierarchical structures and can allow the crystals to be used as templates for fabricating advanced materials.     

卵磷脂-水有序结构对CaCO3晶型的影响

Influence of the concentration of phosphatidylcholine (PC) in the solution of 0.5mol?L-1 CaCl2 on the crystal structure of CaCO3 has been studied by means of X-ray diffraction method. When the concentration of PC is below its CMC, the calcite CaCO3 is formed. It advantageous that CaCl2 reacts with Na2CO3 so as to form vaterite CaCO3 in the lipesome composed of PC more than in the water. The arnount of vaterite CaCO3 formed is increased with increase of concentration of PC. But if the concentration of PC is so increased as to form liquid crystal, then the amount of vaterite decreases obviously. The reason for the difference of crystal type formed has been discussed in the paper.     

Homogeneous Precipitation of Calcium Carbonates by Enzyme Catalyzed Reaction

Catalytic decomposition of urea by urease in aqueous calcium chloride solutions was used to rapidly prepare calcium carbonate polymorphs at room temperature. The nature of the resulting particles depended on the concentration of the enzyme and, in a strong manner, on the agitation of the reacting solutions. In an undisturbed system an amorphous precipitate is formed first, which readily crystallized to vaterite and upon aging changed to calcite. Under the influence of magnetic stirring, the amorphous phase could be not observed; instead smaller particles were initially obtained, which aggregated to vaterite and calcite. Similarly, the application of ultrasonic energy produced small vaterite particles at the early stages. It is apparent that enzyme macromolecules are important in the development of calcite faces and, as such, they exert significant influence on calcite morphology, without being present in detectable amounts in the resulting solids. Copyright 2001 Academic Press.     

Influence of Calcium Sources on Microbially Induced Calcium Carbonate Precipitation by Bacillus sp. CR2

Stimulation of microbially induced calcium carbonate precipitation (MICCP) is likely to be influenced by calcium sources. In order to study such influences, we performed MICCP using Bacillus sp. CR2 in nutrient broth containing urea, supplemented with different calcium sources (calcium chloride, calcium oxide, calcium acetate and calcium nitrate). The experiment lasted 7 days, during which bacterial growth, urease activity, calcite production and pH were measured. Our results showed that calcium chloride is the better calcium source for MICCP process, since it provides higher urease activity and more calcite production. The influences of calcium sources on MICCP were further studied using Fourier transform-infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. These analyses confirmed that the precipitate formed was CaCO₃ and composed of predominantly calcite crystals with a little amount of aragonite and vaterite crystals. The maximum yield of calcite precipitation was achievable with calcium chloride followed by calcium nitrate as a calcium source. The results of present study may be applicable to media preparation during efficient MICCP process.     

Role of Polyelectrolytes in Crystallogenesis of Calcium Carbonate

The effects anionic polyelectrolytes, having various molecular weights and repeating unit structures, on the crystallization of calcium carbonate in supersaturated solutions are studied. The induction times of the crystals grown in the presence of the polymers were optically evaluated; X-ray diffraction and Scanning Electronic Microscopy (SEM) analyses were performed to determine, respectively, their crystalline structures and morphologies. The polyelectrolyte is found to lengthen the induction time and to reduce the size of CaCO₃ nanocrystallites, to an extent depending on the interaction efficiency between the polymer anionic repeating units and the calcium ions. Further, depending on their sizes and their crystalline structures (calcite, vaterite) the nanocrystallites aggregate and yield final calcium carbonate particles having various sizes and morphologies. The data indicate that nanocrystals having vaterite structure, as determined by X-ray analysis, give spherical CaCO₃ final particles, while nanocrystals having calcite structure lead to either acicular or flower shapes of CaCO₃ final particles.     

Bacterially induced mineralization of calcium carbonate: the role of exopolysaccharides and capsular polysaccharides.

Bacterially induced carbonate mineralization has been proposed as a new method for the restoration of limestones in historic buildings and monuments. We describe here the formation of calcite crystals by extracellular polymeric substances isolated from Bacillus firmus and Bacillus sphaericus. We isolated bacterial outer structures (glycocalix and parietal polymers), such as exopolysaccharides (EPS) and capsular polysaccharides (CPS) and checked for their influence on calcite precipitation. CPS and EPS extracted from both B. firmus and B. sphaericus were able to mediate CaCO3 precipitation in vitro. X-ray microanalysis showed that in all cases the formed crystals were calcite. Scanning electron microscopy showed that the shape of the crystals depended on the fractions utilized. These results suggest the possibility that biochemical composition of CPS or EPS influences the resulting morphology of CaCO3. There were no precipitates in the blank samples. CPS and EPS comprised of proteins and glycoproteins. Positive alcian blue staining also reveals acidic polysaccharides in CPS and EPS fractions. Proteins with molecular masses of 25-40 kDa and 70 kDa in the CPS fraction were highly expressed in the presence of calcium oxalate. This high level of synthesis could be related to the binding of calcium ions and carbonate deposition.