Transient response of the crack-tip field in a magnetoelectroelastic half-space with a functionally graded coating under impacts

This paper has twofold aims. One is to study the dynamic response of a magnetoelectroelastic half-space with functionally graded coating containing crack at the interface when subjected to sudden impacts. Two different loading positions, where the material and crack surfaces are loaded respectively, are considered. By using the integral transform method, the problem is reduced to solving singular integral equations. Obtained numerical results show that the overshoots of dynamic fracture parameters are strongly amplified or reduced depending on negative or positive gradient, respectively for the case of the material surface being loaded suddenly. This implies that a functionally graded coating with a positive gradient index is preferable in engineering design due to its capability of preventing the structure from cracking. The second objective is to give a comparison of relevant dynamic parameters such as the intensity factors of stress and strain, energy release rate, and energy density factor, and their features are elucidated under dynamic combined loadings. It indicates that the strain intensity factor can overcome the drawbacks of the rest parameters, and may be chosen as an effective fracture parameter, while three others cannot be adopted as fracture criteria to describe the feature of onset of crack growth.     

Impact response of a functionally graded piezoelectric plate with a vertical crack

The dynamic fracture problem for a functionally graded piezoelectric plate containing a crack perpendicular to the free boundaries is considered in this study. It is assumed that the electroelastic properties of the medium vary continuously in the thickness direction. Integral transform techniques and dislocation density function are employed to reduce the problem to the solution of a singular integral equation. Mode I dynamic energy density factors are presented for an internal crack as well as an edge crack for various values of dimensionless parameters representing the size and location of the crack and the material nonhomogeneity.     

功能梯度材料裂纹能量释放率

 提出一个评价功能梯度材料裂纹扩展能量释放率的简单方法， 用双悬臂梁柔度法推导了典型梯度材料内裂纹沿梯度方向扩展的能量 释放率解析表达式，用算例分析了裂纹扩展方向不同能量释放率的差 别.     

黏弹性功能梯度材料裂纹问题的有限元方法

针对组分材料体积含量任意分布的黏弹性功能梯度材料裂纹问题建立有限元分析途径. 通过Laplace变换,将黏弹性问题转化到象空间中求解,基于反映材料非均匀的梯度单元和裂纹尖端奇异特性的奇异单元计算象空间中的位移、应力和应变场,应用虚拟裂纹闭合方法得到应变能释放率,分别由应力和应变能释放率确定应力强度因子. 给出这些断裂参量在物理空间和象空间之间的对应关系,由数值逆变换求出其在物理空间的相应值. 文中分析两端均匀受拉的黏弹性边裂纹板条,首先针对松弛模量表示为空间函数和时间函数乘积的特殊梯度材料进行计算,结合对应原理验证方法的有效性. 然后分析组分材料体积含量具有任意梯度分布的情形,由Mori-Tanaka方法预测象空间中的等效松弛模量. 计算结果表明,蠕变加载条件下,应变能释放率随时间增加,其增大程度与黏弹性组分材料体积含量相关. 由于梯度材料的非均匀黏弹性性质,产生应力重新分布,导致应力强度因子随时间变化,其变化范围与组分材料的体积含量分布方式有关.     

A dielectric crack in a functionally graded piezoelectric layer

Considering the dielectric effects inside a crack, the problem of an electrically dielectric crack in a functionally graded piezoelectric layer is addressed in this paper. The energetically consistent crack-face boundary conditions are utilized to analyze the effects of a dielectric of crack interior. Applying the Fourier transform technique, the boundary-value problem is reduced to solving three coupling singular equations. Then a system of non-linear algebraic equations is obtained and the field intensity factors along with the energy release rate are given. Numerical results show the differences of the electric displacement inside a crack, the stress and electric displacement intensity factors and the energy release rate using the permeable, impermeable, semi-permeable and energetically consistent boundary conditions respectively. The effects of the material non-homogeneity, the applied electric field and the discharge field of crack interior on the electrostatic traction acting on the crack faces and the energy release rate are further studied through the energetically consistent boundary conditions.     

Transient response of an interfacial crack between dissimilar magnetoelectroelastic layers under magnetoelectromechanical impact loadings: Mode-I problem

The dynamic response of an interfacial crack between two dissimilar magnetoelectroelastic layers is investigated under magnetic, electrical and mechanical impact loadings. Four kinds of ideal crack-face assumptions, i.e., magnetoelectrically impermeable (Case 1), magnetically impermeable and electrically permeable (Case 2), magnetically permeable and electrically impermeable (Case 3) and magnetoelectrically permeable (Case 4), are adopted separately. The dynamic field intensity factors and energy release rates are derived. The effects of loading combinations and crack configurations especially for the former on the dynamic response are examined according to energy release rate criterion. The numerical results show that, among others, a negative magnetic (or electrical) loading is generally prone to inhibit the crack extension rather than a positive one for a magnetically (or electrically) impermeable interfacial crack. Results presented in this paper should have potential applications to the design of multilayered magnetoelectroelastic structures.     

Dynamic anti-plane shear of a cracked piezoelectric ceramic

The dynamic theory of antiplane piezoelectricity is applied to solve the problem of a line crack subjected to horizontally polarized shear waves in an arbitrary direction. The problem is formulated by means of integral transforms and reduced to the solution of a Fredholm integral equation of the second kind. The path-independent integral G is extended here to include piezoelectric effects, and is evaluated at the crack tip to obtain the dynamic energy release rate. Numerical calculations are carried out for the dynamic stress intensity factor and energy release rate. The material is piezoelectric ceramic.     

Anti-plane analysis of multiple cracks originating from a circular hole in a magnetoelectroelastic solid

The anti-plane problem of multiple cracks originating from a circular hole in a magnetoelectroelastic solid is investigated under remotely uniform anti-plane mechanical loading and in-plane electromagnetic loadings. The boundary value problem is reduced to a Cauchy integral equation by a new mapping function and the complex variable method, which is further solved exactly. The analytic expressions of the complex potentials, the field intensity factors and the energy release rate are derived in closed-form under the assumption that the surfaces of the cracks and hole are both electrically and magnetically impermeable. The effects of crack configurations and combined loadings on the energy release rate are shown graphically. Several useful results which may have potential applications to the design and fracture analysis of magnetoelectroelastic structures are given.     

Dynamic fracture analysis of an annular interfacial crack between dissimilar magnetoelectroelastic layers

Transient response of an annular interfacial crack between dissimilar magnetoelectroelastic layers under impacts is investigated. On the crack surface, magnetoelectrically impermeable boundary condition is adopted. Using Laplace and Hankel transform techniques, the mixed boundary value problem is reduced to a system of singular integral equations. The integral equations are further reduced to a system of algebraic equations with the aid of Jacobi polynomials. The dynamic field intensity factor and dynamic energy release rate are determined. Numerical results reveal the effects of electric or magnetic loadings and material parameters of composite on crack propagation and growth.     

FRACTURE ANALYSIS OF AN ANNULAR CRACK IN A PIEZOELECTRIC LAYER

A flat annular crack in a piezoelectric layer subjected to electroelastic loadings is investigated under electrically impermeable boundary condition on the crack surface. Using Hankel transform technique, the mixed boundary value problem is reduced to a system of singular integral equations. With the aid of Gauss-Chebyshev integration technique, the integral equations are further reduced to a system of algebraic equations. The field intensity factor and energy release rate are determined. Numerical results reveal the effects of electric loadings and crack configuration on crack propagation and growth. The results seem useful for design of the piezoelectric structures and devices of high performance.     

Dynamic crack propagation in a magneto-electro-elastic solid subjected to mixed loads: Transient Mode-III problem

The transient response of a Mode-III crack propagating in a magneto-electro-elastic solid subjected to mixed loads is investigated through solving the corresponding boundary-initial-value problem in both the cracked solid region and the interior fluid region with treatment of electro-magnetically permeable and impermeable crack face conditions in a unified way. The closed-form results for the dynamic field intensity factors are used to evaluate the dynamic energy release rate through the crack-tip dynamic contour integral. The permeability of the interior fluid region relative to the cracked solid region significantly affects the magneto-electro-mechanical coupling coefficient in the Bleustein–Gulyaev wave function and, consequently, the horizontal shear surface wave speed, the dynamic field intensity factors and the dynamic energy release rate. It is revealed from dynamic fracture mechanics analysis that the dynamic energy release rate thus obtained has an odd dependence on the dynamic electric displacement intensity factor and the dynamic magnetic induction intensity factor. It is also found that the horizontal shear surface wave speed provides the limiting velocity for the propagation of a Mode-III crack in a magneto-electro-elastic solid when there is only applied traction loading.     

Transient response of a rectangular piezoelectric medium with a center crack

The dynamic field intensity factors and energy release rates in a rectangular piezoelectric ceramic medium containing a center crack are obtained for boundary conditions of a permeable and an impermeable crack under electro-mechanical impact loading. An integral transform method is used to reduce the problem to two pairs of dual integral equations, which are then expressed as Fredholm integral equations of the second kind. Numerical values on the dynamic energy release rate are obtained to show the dependences upon the geometry and electric field.     

Mode III crack problem in a functionally graded magneto-electro-elastic strip

Considering the material properties to be one-dimensionally dependent, this paper studied an anti-plane problem for an embedded crack and edge crack perpendicular to the boundary of a functionally graded magneto-electro-elastic strip. The crack is assumed to be either magneto-electrically impermeable or permeable. Integral transform and dislocation density functions are employed to reduce the problem to the solution of a system of singular integral equations. Numerical results show the effects of the loading combination parameter, material gradient parameter and crack configuration on the field intensity factors and the energy release rates of the functionally graded magneto-electro-elastic strip.     

FRACTURE ANALYSIS OF A FUNCTIONALLY GRADED STRIP UNDER PLANE DEFORMATION

In this paper the plane elasticity problem for a functionally graded strip containing a crack is considered. It is assumed that the reciprocal of the shear modulus is a linear function of the thickness-coordinate, while the Possion's ratio keeps constant. By utilizing the Fourier transformation technique and the transfer matrix method, the mixed boundary problem is reduced to a system of singular integral equations that are solved numerically. The influences of the geometric parameters and the graded parameter on the stress intensity factors and the strain energy release rate are investigated. The numerical results show that the graded parameters, the thickness of the strip and the crack size have significant effects on the stress intensity factors and the strain energy release rate.     

Angle cracks in two bonded functionally graded piezoelectric material under anti-plane shear

Consider two bonded functionally graded piezoelectric material (FGPM) with finite height. Each material contains an arbitrary oriented crack. The material properties are assumed in exponential forms in the direction normal to the interface. The crack surface condition is assumed to be electrically impermeable or permeable. Using the Fourier transform technique, the problem can be reduced to a system of singular integral equations, which are then solved numerically by applying the Gauss-Chebyshev integration formula to obtain the stress intensity factors at the crack tips. Numerical calculations are carried out to obtain the energy density factor S and the energy release rate G. In impermeable case, the energy release rate has been shown to be negative as the electric loads are applied. The positive definite characteristic of the energy density factor makes it possible for predicting the fracture behavior of the cracked structure. The influences of the non-homogeneous parameters and crack orientation on the energy density factors at the crack tips are discussed in detail. The results show that the energy density factor at the crack tip will be increased when the crack tip is located within the softer material.     

ELECTROELASTIC FIELD FOR AN IMPERMEABLE ANTI-PLANE SHEAR CRACK IN A PIEZOELECTRIC CERAMICS PLATE

ＩｎｔｒｏｄｕｃｔｉｏｎＤｕｅｔｏｔｈｅｉｎｔｒｉｎｓｉｃｃｏｕｐｌｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｓｂｅｔｗｅｅｎｅｌｅｃｔｒｉｃａｎｄｅｌａｓｔｉｃｂｅｈａｖｉｏｒｓ,ｔｈａｔｉｓ,ａｐｐｌｉｅｄｍｅｃｈａｎｉｃａｌｌｏａｄｉｎｇｐｒｏｄｕｃｅｓｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ａｓｗｅｌｌａｓｅｌｅｃｔｒｉｃｆｉｅｌｄ ,ａｎｄｃｏｎｖｅｒｓｅｌｙｅｌｅｃｔｒｉｃｆｉｅｌｄｃａｎｇｉｖｅｒｉｓｅｔｏｅｌａｓｔｉｃｄｅｆｏｒｍａｔｉｏｎ ,ｐｉｅｚｏｅｌｅｃｔｒｉｃｍａｔｅｒｉａｌｓｈａｖｅ…     

Moving eccentric crack in a piezoelectric strip bonded to elastic materials

Summary  The steady-state of a propagation eccentric crack in a piezoelectric ceramic strip bonded between two elastic materials under combined anti-plane mechanical shear and in-plane electrical loadings is considered in this paper. The analysis based on the integral transform approach is conducted on the permeable crack condition. Field intensity factors and energy release rate are obtained in terms of a Fredholm integral equation of the second kind. It is shown for this geometry that the crack propagation speed has influence on the dynamic energy release rate. The initial crack branching angle for a PZT-5H piezoceramic structure is predicted by the maximum energy release rate criterion. Received 23 January 2001; accepted for publication 18 October 2001     

Periodic cracks in a functionally graded piezoelectric layer bonded to a piezoelectric half-plane

Studied is the problem of a periodic array of cracks in a functionally graded piezoelectric strip bonded to a homogeneous piezoelectric material. The properties of the functionally graded piezoelectric strip, such as elastic modulus, piezoelectric constant and dielectric constant, are assumed in exponential forms and vary along the crack direction. The crack surface condition is assumed to be electrically impermeable or permeable. Integral transform and dislocation density functions are employed to reduce the problem to the solution of a system of singular integral equations. The effects of the periodic crack spacing, material constants and the geometry parameters on the stress intensity factor, the energy release ratio and the energy density factor are studied.     

Dielectric crack problem for a magnetoelectroelastic strip with functionally graded properties

The paper presents a fracture analysis for an electromagnetically dielectric crack in a functionally graded magnetoelectroelastic strip. It is considered that the material properties are varying exponentially along the width direction. Under the assumption of the in-plane magneto-electro-mechanical loadings, the dielectric crack is simulated by using the semi-permeable crack-face boundary conditions. The Fourier transform technique is applied to solve the boundary-value problem and four coupling singular integral equations are determined. A nonlinear system of algebraic equations is further derived and solved numerically to determine the electromagnetic field inside the crack. Then the field intensity factors of stress, electric displacement, and magnetic induction are given. Through the numerical computations, the effects of the material non-homogeneity and the permeability of crack interior on the electric displacement and the magnetic induction at the crack faces are studied. The variations of the intensity factors of stress, electric displacement, and magnetic induction versus the geometry of the crack, the strip width, and the material non-homogeneity are presented in graphics respectively.     

Dynamic internal crack problem of a functionally graded magneto-electro-elastic strip

In this paper the dynamic anti-plane problem for a functionally graded magneto-electro-elastic strip containing an internal crack perpendicular to the boundary is investigated. The crack is assumed to be either magneto-electrically impermeable or permeable. Integral transforms and dislocation density functions are employed to reduce the problem to Cauchy singular integral equations. Numerical results show the effects of loading combination parameter, material gradient parameter and crack configuration on the dynamic response. With the magneto-electrically permeable assumption, both the magnetical and electrical impacts have no contribution to the crack tip field singularity. However, with the impermeable assumption, both the applied magnetical loads and electrical loads play a dominant role in the dynamic fracture behavior of crack tips. And for the two kinds of crack surface conditions, increasing the graded index can all retard the crack extension.