Advanced procedure for the enzymatic ring opening of unsaturated alicyclic β-lactams

Enantiopure β-amino acids 1a–4a and β-lactams 1b–4b were prepared simultaneously through the lipolase-catalysed enantioselective ring opening of unsaturated racemic β-lactams (±)-1-(±)-4. High enantioselectivities (E>200) were observed when the reactions were performed with 1 equiv of water in iPr₂O at 70 °C. The resolved (1R,2S)-amino acids (yield⩾45%) and (1S,5R)-, (1S,6R)- and (1S,8R)-lactams (yield⩾47%) could be easily separated. The ring opening of lactam enantiomers 1b–4b with 18% HCl afforded the corresponding β-amino acid hydrochlorides 1c·HCl–4c·HCl (ee >95%).     

Enthalpic changes on mixing two couples of S- and R-enantiomers of benzyl-(1-phenyl-ethyl)-amine, 1-phenylethylamine, 1-phenyl-ethanol,butyric acid oxiranylmethyl ester, 4-methyl-[1,3]dioxolan-2-one, 2-chloro-methyloxirane and 3-hydroxyisobutyric acid methyl ester at T = 298.15 K

Enthalpies of mixing of (R)- and (S)-enantomers of liquid chiral compounds such as benzyl-(1-phenyl-ethyl)-amine (1), 1-phenylethylamine (2), 1-phenyl-ethanol (3), butyric acid oxiranylmethyl ester (4), 4-methyl-[1,3]dioxolan-2-one (5), 2-Chloromethyloxirane (6) and 3-hydroxyisobutyric acid methyl ester (7) have been measured over the whole range of mole fractions at 298.15 K, albeit very small values. Mixing of heterochiral liquids of R-1 + S-1, R-5 + S-5, and R-7 + S-7 realized enthalpic stabilization over the whole range of mole fractions, whereas that of R-2 + S-2, R-3 + S-3, R-4 + S-4, and R-6 + S-6 realized enthalpic destabilization over entire compositions. The extreme values of enthalpies of mixing and the intermolecular interaction obtained by the molecular mechanics calculations showed a linear correlation, except few the compounds measured.     

Synthesis of rigid and C2-symmetric 18-crown-6 type macrocycles bearing diamide–diester groups: enantiomeric recognition for α-(1-naphthyl)ethylammonium perchlorate salts

A series of rigid and chiral C₂-symmetric 18-crown-6 type macrocycles (S,S)-4, (S,S)-5, (S,S)-6 and (R,R)-2 bearing diamide–ester groups were synthesized. The binding properties of these macrocycles were examined for α-(1-naphthyl)ethylammonium perchlorates salts by an ¹H NMR titration method. Taking into account the host employed, important differences were observed in the K_a values of (R)- and (S)-enantiomers of guests for macrocycles (S,S)-4 and (S,S)-6, K_S/K_R = 3.6, and K_S/K_R = 0.1 (K_R/K_S = 10.3) ΔΔG = 3.19 and ΔΔG = ?5.77 kJ mol^?1, respectively. The results indicated excellent enantioselectivity of macrocyclic (S,S)-6 towards the enantiomers of α-(1-naphthyl)ethylammonium perchlorate salts.     

Synthesis of the (1S,2S)- and (1R,2S)-stereoisomers of the respective E- and Z-isomers of ethyl 4-[(2-hydroxycyclohexyl)methyl]phenoxy-3-methyl-2-butenoate using yeast whole cell bioreduction of the parent ketones

Saccharomyces cerevisiae, strain DBM 2115, was successfully employed in the reduction of the separated Z- and E-isomers of ethyl 4-[(2-oxocyclohexyl)methyl]phenoxy-3-methyl-2-butenoates 1 and 2, in order to prepare the (1S,2S)- and (1R,2S)-enantiomers of the corresponding ethyl 4-[(2-hydroxycyclohexyl)methyl]phenoxy-3-methyl-2-butenoates 3–6. The products were obtained with the required absolute configuration: (1S,2S)-3 (ee = 98%; yield 48%), (1R,2S)-4 (ee = >99%; yield 45%), (1S,2S)-5 (ee = 98.5%; yield 47%), and (1R,2S)-6 (ee = >99%; chemical yield 44%).     

Preparation of various enantiomerically pure (benzotriazol-1-yl)- and (benzotriazol-2-yl)-alkan-2-ols

(S)-(−)-(Benzotriazol-1-yl)- and (S)-(−)-(benzotriazol-2-yl)-alkan-2-ols 7a–9a, 7b–9b and their (R)-(+)-acetates 10a–12a and 10b–12b were prepared in high enantiomeric excess via lipase from Pseudomonas fluorescens (Amano AK) catalyzed enantioselective acetylation of racemic alcohols 4a–6a and 4b–6b with vinyl acetate in tert-butyl methyl ether or toluene at 23 °C. The enantioselectivity of this transformation was dependent on the length of the alkyl chain with E-values ranging from 30 to 57. Several benzotriazole substituted ketones 1a–3a and 1b–3b were synthesized from 1H-benzotriazole and corresponding haloketones. These compounds were stereoselectively reduced with Baker’s yeast in water or in organic solvent containing 5% v/v of water at 30 °C to give the (S)-(−)-alcohol. Better stereoselectivity was observed in the kinetic resolution of racemic alcohols 4a–6a and 4b–6b (ee = 69–92% at 44–52% conversion) compared to reduction of corresponding prochiral ketones 1a–3a and 1b–3b with Baker’s yeast (ee = 40–67% at 39–89% conversion). Enhanced enantioselectivities were observed at lower temperatures.     

Continuous-flow enzymatic resolution strategy for the acylation of amino alcohols with a remote stereogenic centre: synthesis of calycotomine enantiomers

Both enantiomers of calycotomine (R)-5 and (S)-5 were prepared through the CAL-B-catalysed asymmetric O-acylation of N-Boc-protected (6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolin-1-yl)methanol [(±)-3)]. The optimum conditions for the enzymatic resolution were determined under continuous-flow conditions, while the preparative-scale resolution of (±)-3 was performed as a batch reaction with high enantioselectivity (E >200). The resulting amino alcohol (S)-3 and amino ester (R)-4, obtained with high enantiomeric excess (ee = 99%), were transformed into the desired calycotomine (S)-5 and (R)-5 (ee = 99%). A systematic study was carried out in a continuous-flow system on the O-acylation of tetrahydroisoquinoline amino alcohol homologues (±)-1 to (±)-3 containing a remote stereogenic centre.     

Approaches to (R)- and (S)-1′-(1-aminoethyl)ferrocene-1-carboxylic acid derivatives

Lipase-catalyzed esterification of (±)-methyl 1′-(1-hydroxyethyl)ferrocene-1-carboxylate 4 afforded its (R)-acetate (−)-5 (ee = 99%) and (S)-(+)-4 (ee = 90%). Stereoretentive azidation/amination/acetylation of (R)-(−)-5 gave (R)-(+)-methyl 1′-(1-acetamidoethyl)ferrocene-1-carboxylate (R)-3 (ee = 98%). In a similar manner (S)-(+)-4 was converted into (S)-(−)-3 (ee = 84%). Both enantiomers of 3 were obtained in high chemical yields without a loss of enantiomeric purity. The title compounds can be coupled with natural amino acids and peptides on both C- and N-termini.     

Stereoselective synthesis of novel tetrahydroxypyrrolizidines

N-Benzyloxycarbonyl-2,5-dideoxy-2,5-imino-3,4-O-isopropylidene-l-ribose 12a has been converted into (1R,2S,6R,7S,7aS)-5 and (1R,2S,6S,7R,7aR)-1,2,6,7-tetrahydroxypyrrolidin-5-ones 6 and (1R,2S,6S,7S,7aS)-7 and (1R,2S,6R,7R,7aS)-1,2,6,7-tetrahydroxypyrrolizidines 8 following stereoselective paths. These new compounds have been assayed for their inhibitory activities towards 25 glycosidases. Pyrrolizidines 7 and 8 are moderate but selective inhibitors of amyloglucosidase from Rhizopus mold (7: IC₅₀=130 μM, K_i=120 μM; 8: IC₅₀=200 μM, K_i=180 μM, mixed type of inhibition).     

Sharpless asymmetric dihydroxylation as the key step in the enantioselective synthesis of spirocyclic σ1 receptor ligands

The enantioselective synthesis of fluorinated spirocyclic σ₁ ligands involved three key steps: (1) the Sharpless asymmetric dihydroxylation of 2-bromostyrene 5 provided enantiomerically pure diols (R)-6 and (S)-6 establishing the stereogenic center; (2) the intramolecular opening of the oxirane ring of (R)-11 and (S)-11, which occurred with excellent regioselectivity and complete inversion of configuration giving access to enantiomerically pure alcohols (S)-7a and (R)-7a; (3) the treatment of alcohols (S)-7b and (R)-7b with DAST, which led to the fluoromethyl derivatives (S)-1 and (R)-1 without racemization. X-ray crystal structure analysis of the tosylate (R)-13 confirmed the absolute configuration of the spirocyclic compounds as well as the enantioselectivity during the Sharpless asymmetric dihydroxylation of 5. The (S)-configured fluoromethyl derivative (S)-1 revealed a high σ₁ affinity (K_i = 1.8 nM), high eudismic ratio (factor 8) and high selectivity over the σ₂ subtype (667-fold).     

New chemical and chemo-enzymatic routes for the synthesis of (RS)- and (S)-enciprazine

The chemo-enzymatic synthesis of racemic and enantiopure (RS)- and (S)-enciprazine 1, a non-benzodiazepine anxiolytic drug, is described herein. The synthesis started from 1-(2-methoxyphenyl) piperazine 3, which was treated with 2-(chloromethyl) oxirane (RS)-4 using lithium bromide to afford a racemic alcohol, 1-chloro-3-(4-(2-methoxyphenyl) piperazin-1-yl) propan-2-ol (RS)-6 in 85% yield. Intermediate (S)-6 was synthesized from racemic alcohol (RS)-6 using Candida rugosa lipase (CRL) with vinyl acetate as the acyl donor. Various reaction parameters such as temperature, time, substrate, enzyme concentration, and the effect of the reaction medium on the conversion and enantiomeric excess for the transesterification of (RS)-6 by CRL were optimized. It was observed that 10 mM of (RS)-6, 50 mg/mL of CRL in 4.0 mL of toluene with vinyl acetate (5.4 mmol) as acyl donor at 30 °C gave good conversion (C = 49.4%) and enantiomeric excess (ee_P = 98.4% and ee_S = 96%) after 9 h of reaction. Compound (S)-6 is a key intermediate for the synthesis of enantiopure (S)-1. The (RS)- and (S)-enciprazine drug 1 was synthesized by treating (RS)- and (S)-6 with 3,4,5-trimethoxyphenol 5 using MeCN as a solvent and K₂CO₃ as a base.     

Enzymatic reactions for the preparation of homocalycotomine enantiomers

Homocalycotomine enantiomers (R)-4 and (S)-4 were prepared by the Candida antarctica lipase B (CAL-B)-catalysed asymmetric O-acylation of N-Boc-protected 2-(6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolin-1-yl)ethanol (±)-1. The preliminary small-scale experiments were performed either in a continuous-flow system or as batch reactions, while the preparative-scale resolution was carried out in two steps with vinyl acetate as the acyl donor in the presence of Et₃N and Na₂SO₄ in toluene at 3 °C, as a batch reaction. Treatment of the resulting amino alcohol (S)-1 and amino ester (R)-3 (ee ?94%) with 18% HCl, and then with 5 M NaOH, furnished the desired (R)-4 and (S)-4 without a decrease in the enantiomeric excess (ee ?94%).     

Total synthesis of (4R,5S,6E,14S)- and (4R,5S,6E,14R)-cystothiazoles F

Total synthesis of (4R,5S,6E,14S)- and (4R,5S,6E,14R)-cystothiazoles F 3 was achieved from the chiral bithiazole-type primary alcohols [(S)- and (R)-4-ethoxycarbonyl-2′-(1-hydroxymethylethyl)-2,4′-bithiazoles 8], which were obtained based on the enzymatic resolution of racemic alcohol 8 and its acetate 9. From a direct comparison by means of chiral HPLC between natural cystothiazole F 3 and synthetic compounds [(4R,5S,6E,14S)- and (4R,5S,6E,14R)-cystothiazoles 3], natural cystothiazole F 3 was found to be a 33:67 diastereomeric mixture [(4R,5S,6E,14S)-3:(4R,5S,6E,14R)-3 = 33:67].     

The enantiomeric recognition of chiral organic ammonium salts by chiral pyridino-macrocycles bearing aminoalcohol subunits

Pyridine-based macrocycles were prepared by treating 2,6-bis[[2′6′-bis(bromomethyl)-4′-methylphenoxy]methyl]pyridine 3 with the appropriate chiral aminoalcohols. The enantiomeric recognition of these macrocycles bearing aminoalcohol subunits of the pyridinocrown type ligand was evaluated for chiral organic ammonium salts by UV titration. The important differences were observed in the K_a values of (R)-Am2 and (S)-Am2 for (S,S,S)-1, (S,S,S)-2 and (S,S,S)-3 hosts, K_S/K_R = 5.0, K_S/K_R = 2.4 and K_S/K_R = 5.0, respectively. There seems to be a general tendency for hosts to recognise (S)-enantiomers for both Am1 and Am2.     

Synthesis of chiral ligands containing the N-(S)-α-phenylethyl group and their evaluation as activators in the enantioselective addition of Et2Zn to benzaldehyde

The synthesis of chiral ligands 4–18 derived from N-[(S)-α-phenylethyl]-trans-β-aminocyclohexanols (S,S,S)-1a and (R,R,S)-2 is described. Addition of diethylzinc to benzaldehyde catalyzed by ligands 4–18 (6 mol %) proceeds in fair to good yield (45–86%), and low to good enantioselectivities (1–76% ee). Highest enantioselectivities were induced by ligands (S,S,S)-4 and (S,S,S,S,R,R)-18 (76% and 68% ee, respectively). The configuration of the major enantiomer of carbinol 3 is (R) in both cases.     

Asymmetric reductions of ethyl 2-(benzamidomethyl)-3-oxobutanoate by yeasts

The stereoselective reduction of ethyl 2-(benzamidomethyl)-3-oxobutanoate 1 using yeasts was investigated among a restricted number (12) of yeasts. Kluyveromyces marxianus var. lactis CL69 diastereoselectively produced (2R,3S)-ethyl 2-(benzamidomethyl)-3-hydroxybutanoate 2, whereas Pichia glucozyma CBS 5766 gave (2S,3S)-2 as the major stereoisomer. The biotransformations were independently optimized for minimizing by-product formation and maximizing the diastereoselectivity. Under optimized conditions, K. marxianus var. lactis CL 69 gave the (2R,3S)-ethyl 2-(benzamidomethyl)-3-hydroxybutanoate 2 with ee > 99% and de = 98%, while P. glucozyma CBS 5766 allowed for the production of (2S,3S)-2 with ee > 99% and de = 86%.     

Kinetic resolution of racemic secondary aliphatic allylic alcohols in lipase-catalyzed transesterification

Different lipases were screened as biocatalysts in the kinetic resolution process of (±)-hept-1-en-3-ol 1, (±)-5-methylhex-1-en-3-ol 2, (±)-6-methylhept-2-en-4-ol 3, (±)-6,6-dimethylhept-2-en-4-ol 4, and 1-phenylbut-3-en-2-ol 5 by enantioselective transesterification. The acylation of (±)-1 and (±)-2 catalyzed by Novozym 435 (Candida antarctica) was very effective and proceeded with good enantioselectivity. After 4–8 h of reactions the esters formed and the alcohols, which remained were obtained with high enantiomeric excess with 97–100% ee and 91–100% ee, respectively. The lipase Amano PS (Burkholderia cepacia) was the best catalyst in the asymmetric transesterification of (±)-5 affording the (R)-alcohol with 90–95% ee and the (S)-ester with 98–100% ee. Low enantioselectivities were observed in the cases of lipase-catalyzed acylation of (±)-3 and (±)-4.     

Efficient synthesis of 2,6,7,8-tetrahydroxyindolizidines (castanospermine analogues) via the dipolar cycloadditions of N-benzyl-C-(tetrofuranos-4-yl)nitrones to methyl acrylate

The dipolar cycloaddition of (Z)-N-benzyl-(3-O-benzyl-1,2-O-isopropylidene-α-d-ribofuranos-5-ylidene)amine N-oxide to methyl acrylate gives a 53:16:26:5 diastereomeric mixture of isoxazolidine derivatives. The dipolar cycloaddition of the xylo analogue to methyl acrylate is more diastereoselective, producing a 44:13:43 mixture of only three diastereomers. The ribo-configured adducts have been converted (4 steps only) into the new (2R,6S,7S,8R,8aR)-, (2S,6S,7S,8R,8aR)-, (2S,6S,7S,8R,8aS)- and (2R,6S,7S,8R,8aS)-2,6,7,8-tetrahydroxyindolizidines. Similarly, the two xylo-configured major isoxazolidine derivatives were converted into the known derivatives (2R,6S,7R,8R,8aS)- and (2S,6S,7R,8R,8aR)-2,6,7,8-tetrahydroxyindolizidines. The six isomeric indolizidine derivatives obtained have been evaluated for their inhibiting activities towards 15 glycosidases. Only the (2R,6S,7S,8R,8aR)-configured isomer is a selective inhibitor of amyloglucosidases from Aspergillus niger (IC₅₀ = 350 μM) and from Rhizopus mold (IC₅₀ = 90 μM, K_i = 195 μM, non-competitive), the other indolizidines show very little inhibitory activity at 1 mM concentration.     

Co-crystal of (R,R)-1,2-cyclohexanediol with (R,R)-tartaric acid,a key structure in resolution of the (±)-trans-diol by supercritical extraction,and the related ternary phase system

A novel co-crystal of trans-(R,R)-1,2-cyclohexanediol and (R,R)-tartaric acid (with 1:1 molar ratio, 1) has been found to be a key crystalline compound in the improved resolution of (±)-trans-1,2-cyclohexanediol by supercritical fluid extraction. The molecular and crystal structure of this co-crystal, which crystallizes in orthorhombic crystal system (space group P2₁2₁2₁, a = 6.7033(13) Å, b = 7.2643(16), c = 24.863(5), Z = 4), has been solved by single crystal X-ray diffraction (R = 0.064). The packing arrangement consists of two dimensional layers of sandwich-like sheets, where the inner part is constructed by double layers of tartaric acids which hydrophilicity is “covered” on both upper and bottom side by cyclohexanediols with the hydrophobic cyclohexane rings pointing outward. Thus, a rather complex hydrogen bonding pattern is constructed. The relatively high melting point (133 °C) observed by both simultaneous TG/DTA and DSC, and the main features of FTIR-spectrum of 1 are explained by the increased stability of this crystal structure. DSC studies on binary mixtures of co-crystal 1 with (R,R)-1,2-cyclohexanediol or (R,R)-tartaric acid, revealed eutectic temperatures of T_eu = 100 or 131 °C, respectively. Between (S,S)-1,2-cyclohexanediol and (R,R)-tartaric acid a eutectic temperature of T_eu = 85 °C have also been observed. The phase relations have been confirmed by powder X-ray diffraction, as well.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

An efficient synthesis of (7S,10R)-2-bromo-5,6,7,8,9,10-hexahydro-7,10-epiminocyclohepta[b]indole: application in the preparation and structural confirmation of a potent 5-HT6 antagonist

(7S,10R)-5-Methyl-2-((3-(trifluoromethyl)phenyl)sulfonyl)-5,6,7,8,9,10-hexahydro-7,10-epiminocyclohepta[b]indole 1a is a potent 5-HT₆ antagonist (h5-HT₆ K_i = 1.5 nM) which is derived from an epiminocyclohept[b]indole scaffold. In order to synthesize 1a on a multi-gram scale to support advanced biological testing, an efficient chiral resolution of the intermediate tert-butyl 2-bromo-5,6,7,8,9,10-hexahydro-7,10-epiminocyclohepta[b]indole-11-carboxylate 2 was developed. After derivatizing 2 with (1R)-(?)-menthyl chloroformate it was found that a single diastereomer 7a could be isolated by selective precipitation from n-hexane. The absolute stereochemistry of 7a was determined by X-ray crystallography and the structure was confirmed as (7S,10R)-tert-butyl 2-bromo-5,6,7,8,9,10-hexahydro-7,10-epiminocyclohepta[b]indole-11-carboxylate. Removal of the chiral auxiliary under basic conditions afforded intermediate 2a in >99% enantiomeric purity and with 80% yield based on recovery from the racemic compound 2. Intermediate 2a was used successfully to synthesize 5-HT₆ antagonist 1a on a multi-gram scale.